dts/cyfq: remove the support for csot panel

For cypfq, we don't suport csot panel.
So we remove these related codes.

Change-Id: Ic91e164c8b9b8b967cccf937c546cda8daMontana7ff
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2080493
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This commit is contained in:
houdz1 2021-09-30 16:54:24 +08:00 • committed by panyq6
commit e55bc18561
3 changed files with 0 additions and 96 deletions

View file

@ -1,6 +1,5 @@
#include "dsi-panel-mot-dummy-qhd-video.dtsi"
#include "dsi-panel-mot-tianma-ili7807s-678-1080x2460-video.dtsi"
#include "dsi-panel-mot-csot-gc7372-678-1080x2460-video.dtsi"
&display_panel_avdd {
/delete-property/ gpio;
@ -178,61 +177,6 @@
};
};
&dsi_csot_gc7372_678_fhd_video {
qcom,platform-te-gpio = <&tlmm 23 0>;
qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_cypfq>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,bklt-dcs-2bytes-enabled;
qcom,mdss-dsi-bl-min-level = <8>;
qcom,mdss-dsi-bl-max-level = <1023>;
qcom,mdss-dsi-bl-default-level = <512>;
qcom,mdss-brightness-max-level = <1023>;
qcom,esd-check-enabled;
qcom,mdss-dsi-panel-status-check-mode = "reg_read";
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
qcom,mdss-dsi-panel-status-value = <0x9c>;
qcom,mdss-dsi-panel-on-check-value = <0x9c>;
qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,mdss-dsi-no-panel-on-read-support;
qcom,mdss-dsi-panel-supplier = "csot";
qcom,tp_state_check_enable;
qcom,platform-need-execute-shutdown;
qcom,mdss-dsi-pan-enable-dynamic-fps;
qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
qcom,dsi-supported-dfps-list = <60 90 120>;
//qcom,mdss-dsi-panel-hdr-enabled;
//qcom,mdss-dsi-panel-hdr-color-primaries = <15115 15895 32830
// 16770 15010 32385 7770 1830>;
//qcom,mdss-dsi-panel-peak-brightness = <4500000>;
//qcom,mdss-dsi-panel-blackness-level = <3000>;
qcom,mdss-dsi-hbm-type = "lcd-dcs-gpio";
qcom,platform-hbm-en-gpio = <&tlmm 50 0>;
qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 03 51 03 33];
qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 03 51 03 33];
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,mdss-dsi-t-clk-post = <0x0D>;
qcom,mdss-dsi-t-clk-pre = <0x32>;
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-panel-phy-timings = [00 1C 07 07 23 21 07
07 08 02 04 00];
qcom,display-topology = <1 1 1>;
qcom,default-topology-index = <0>;
};
};
};
&mot_dummy_vid_qhd {
qcom,platform-te-gpio = <&tlmm 23 0>;
qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;

View file

@ -122,19 +122,4 @@
ilitek,report_gesture_key;
status = "ok"
};
gcore@1 {
compatible = "gcore,touchscreen";
reg = <0x1>;
spi-max-frequency = <8000000>;
panel = <&dsi_csot_gc7372_678_fhd_video>;
gcore,rst-gpio = <&tlmm 21 0x00>;
gcore,irq-gpio = <&tlmm 22 0x2001>;
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release";
pinctrl-0 = <&ts_active>;
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
pinctrl-2 = <&pmx_ts_release>;
gcore,report_gesture_key;
status = "ok"
};
};

View file

@ -22,28 +22,3 @@
qcom,board-id = <0x47 0xB100>;
};
&dsi_csot_gc7372_678_fhd_video {
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-on-command =
[
39 01 00 00 00 00 04 FF 55 AA 66
15 01 00 00 00 00 02 FF 23
15 01 00 00 00 00 02 FB 00
15 01 00 00 00 00 02 2E 2B
15 01 00 00 00 00 02 32 01
15 01 00 00 00 00 02 FF 10
15 01 00 00 00 00 02 FB 00
15 01 00 00 00 00 02 36 08
15 01 00 00 00 00 02 BA 03
15 01 00 00 00 00 02 69 00
15 01 00 00 00 00 02 35 00
15 01 00 00 00 00 02 53 2C
15 01 00 00 00 00 02 55 01
05 01 00 00 96 00 01 11
05 01 00 00 32 00 01 29
];
};
};
};