ARM: SoC driver updates

- New SoC specific drivers
   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware
   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).
 
 - Reset subsystem, merged through arm-soc by tradition:
   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs
   - Various subsystem-wide cleanups
 
 - Updates for existing SoC-specific drivers
   - TI GPMC (General Purpose Memory Controller)
   - Mediatek "scpsys" system controller support for MT6797
   - Broadcom "brcmstb_gisb" bus arbitrer
   - ARM SCPI firmware
   - Renesas "SYSC" system controller
 
 One more driver update was submitted for the Freescale/NXP DPAA
 data path acceleration that has previously been used on PowerPC
 chips. I ended up postponing the merge until some API questions
 for its unusual MMIO access are resolved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpDFmCrR//JCVInAQKoihAAosgC3+3IHppOhHid+HepkOcp2teyKknw
 42fSXVpTdfWa8Oe7q80Kzmz2CPNfFq2SzHz6oXb9WCcDFqSGr0b9aSE7NnksRjTf
 2euHVJ4MnJpkRewvorRmcpK8dPXDcHwEw/8hU3yZtJUGI0IKtlrqXis+evgkz9cn
 YDynuVdAZgZiEfiNeSeadyNLcxaQCc3x9ovvsBXxBa1/x1pfeRnTbp+6hiHilCJu
 Szts/yAzZzZE9Jkf9dLKfNlsT6m2SgtjukqqOR+zHAhi7/BdTFSVUP6L8u7QjrR+
 +ijTICg8FMJGiWLAOe6ED2qZVByN92EJ2AGwriYlSles9ouoGfRkJ2rwxyjbete7
 avy0HP+PSBFXWdwbOcq8HX8CrbuBltagl5fkMokct6biWLLMshNZ33WWdQ6/DsM2
 b9mAAZuhbs0g1qWUBD3+q6qBytSuGme6Px6fMoVEc4GQ2YVFUQOoEfZOGKRv1U1o
 aMWGt/6qeF8SG288rYAnQ/TuYWpOLtksV6yhotA00HUHhkTCy0xVCdyWGZtNyKhG
 o/x4YnhWFzHsXmqKcR1sM7LzfZY/WNmbrOLvK6i83Z0P7QptqrdaLAylL3iSPEyX
 ZDUgExf6PYXkWIewc3KwC5sJjuD05z3ZCgIR+mCezwbuD+3Z2fOdjodY/VBZ74hq
 URcM/BqtuWE=
 =5L6n
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...

drivers/reset/Kconfig

@@ -34,6 +34,13 @@ config RESET_BERLIN
 	help
 	  This enables the reset controller driver for Marvell Berlin SoCs.
 
+config RESET_GEMINI
+	bool "Gemini Reset Driver" if COMPILE_TEST
+	default ARCH_GEMINI
+	select MFD_SYSCON
+	help
+	  This enables the reset controller driver for Cortina Systems Gemini.
+
 config RESET_IMX7
 	bool "i.MX7 Reset Driver" if COMPILE_TEST
 	default SOC_IMX7D
@@ -80,7 +87,15 @@ config RESET_SUNXI
 	help
 	  This enables the reset driver for Allwinner SoCs.
 
-config TI_SYSCON_RESET
+config RESET_TI_SCI
+	tristate "TI System Control Interface (TI-SCI) reset driver"
+	depends on TI_SCI_PROTOCOL
+	help
+	  This enables the reset driver support over TI System Control Interface
+	  available on some new TI's SoCs. If you wish to use reset resources
+	  managed by the TI System Controller, say Y here. Otherwise, say N.
+
+config RESET_TI_SYSCON
 	tristate "TI SYSCON Reset Driver"
 	depends on HAS_IOMEM
 	select MFD_SYSCON

drivers/reset/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_GEMINI) += reset-gemini.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
@@ -13,7 +14,8 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_STM32) += reset-stm32.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
-obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
+obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
+obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o

drivers/reset/core.c

@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
+#include <linux/kref.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/reset.h>
@@ -40,7 +41,7 @@ struct reset_control {
 	struct reset_controller_dev *rcdev;
 	struct list_head list;
 	unsigned int id;
-	unsigned int refcnt;
+	struct kref refcnt;
 	bool shared;
 	atomic_t deassert_count;
 	atomic_t triggered_count;
@@ -288,7 +289,7 @@ static struct reset_control *__reset_control_get_internal(
 			if (WARN_ON(!rstc->shared || !shared))
 				return ERR_PTR(-EBUSY);
 
-			rstc->refcnt++;
+			kref_get(&rstc->refcnt);
 			return rstc;
 		}
 	}
@@ -302,23 +303,30 @@ static struct reset_control *__reset_control_get_internal(
 	rstc->rcdev = rcdev;
 	list_add(&rstc->list, &rcdev->reset_control_head);
 	rstc->id = index;
-	rstc->refcnt = 1;
+	kref_init(&rstc->refcnt);
 	rstc->shared = shared;
 
 	return rstc;
 }
 
+static void __reset_control_release(struct kref *kref)
+{
+	struct reset_control *rstc = container_of(kref, struct reset_control,
+						  refcnt);
+
+	lockdep_assert_held(&reset_list_mutex);
+
+	module_put(rstc->rcdev->owner);
+
+	list_del(&rstc->list);
+	kfree(rstc);
+}
+
 static void __reset_control_put_internal(struct reset_control *rstc)
 {
 	lockdep_assert_held(&reset_list_mutex);
 
-	if (--rstc->refcnt)
-		return;
-
-	module_put(rstc->rcdev->owner);
-
-	list_del(&rstc->list);
-	kfree(rstc);
+	kref_put(&rstc->refcnt, __reset_control_release);
 }
 
 struct reset_control *__of_reset_control_get(struct device_node *node,
@@ -400,7 +408,6 @@ EXPORT_SYMBOL_GPL(__reset_control_get);
  * reset_control_put - free the reset controller
  * @rstc: reset controller
  */
-
 void reset_control_put(struct reset_control *rstc)
 {
 	if (IS_ERR_OR_NULL(rstc))

drivers/reset/reset-gemini.c

@@ -0,0 +1,110 @@
+/*
+ * Cortina Gemini Reset controller driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+
+/**
+ * struct gemini_reset - gemini reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct gemini_reset {
+	struct regmap *map;
+	struct reset_controller_dev rcdev;
+};
+
+#define GEMINI_GLOBAL_SOFT_RESET 0x0c
+
+#define to_gemini_reset(p) \
+	container_of((p), struct gemini_reset, rcdev)
+
+/*
+ * This is a self-deasserting reset controller.
+ */
+static int gemini_reset(struct reset_controller_dev *rcdev,
+			unsigned long id)
+{
+	struct gemini_reset *gr = to_gemini_reset(rcdev);
+
+	/* Manual says to always set BIT 30 (CPU1) to 1 */
+	return regmap_write(gr->map,
+			    GEMINI_GLOBAL_SOFT_RESET,
+			    BIT(GEMINI_RESET_CPU1) | BIT(id));
+}
+
+static int gemini_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct gemini_reset *gr = to_gemini_reset(rcdev);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(gr->map, GEMINI_GLOBAL_SOFT_RESET, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(id));
+}
+
+static const struct reset_control_ops gemini_reset_ops = {
+	.reset = gemini_reset,
+	.status = gemini_reset_status,
+};
+
+static int gemini_reset_probe(struct platform_device *pdev)
+{
+	struct gemini_reset *gr;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	gr = devm_kzalloc(dev, sizeof(*gr), GFP_KERNEL);
+	if (!gr)
+		return -ENOMEM;
+
+	gr->map = syscon_node_to_regmap(np);
+	if (IS_ERR(gr->map)) {
+		ret = PTR_ERR(gr->map);
+		dev_err(dev, "unable to get regmap (%d)", ret);
+		return ret;
+	}
+	gr->rcdev.owner = THIS_MODULE;
+	gr->rcdev.nr_resets = 32;
+	gr->rcdev.ops = &gemini_reset_ops;
+	gr->rcdev.of_node = pdev->dev.of_node;
+
+	ret = devm_reset_controller_register(&pdev->dev, &gr->rcdev);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "registered Gemini reset controller\n");
+	return 0;
+}
+
+static const struct of_device_id gemini_reset_dt_ids[] = {
+	{ .compatible = "cortina,gemini-syscon", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver gemini_reset_driver = {
+	.probe	= gemini_reset_probe,
+	.driver = {
+		.name		= "gemini-reset",
+		.of_match_table	= gemini_reset_dt_ids,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(gemini_reset_driver);

drivers/reset/reset-ti-sci.c

@@ -0,0 +1,269 @@
+/*
+ * Texas Instrument's System Control Interface (TI-SCI) reset driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_reset_control - reset control structure
+ * @dev_id: SoC-specific device identifier
+ * @reset_mask: reset mask to use for toggling reset
+ * @lock: synchronize reset_mask read-modify-writes
+ */
+struct ti_sci_reset_control {
+	u32 dev_id;
+	u32 reset_mask;
+	struct mutex lock;
+};
+
+/**
+ * struct ti_sci_reset_data - reset controller information structure
+ * @rcdev: reset controller entity
+ * @dev: reset controller device pointer
+ * @sci: TI SCI handle used for communication with system controller
+ * @idr: idr structure for mapping ids to reset control structures
+ */
+struct ti_sci_reset_data {
+	struct reset_controller_dev rcdev;
+	struct device *dev;
+	const struct ti_sci_handle *sci;
+	struct idr idr;
+};
+
+#define to_ti_sci_reset_data(p)	\
+	container_of((p), struct ti_sci_reset_data, rcdev)
+
+/**
+ * ti_sci_reset_set() - program a device's reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to toggle
+ * @assert: boolean flag to indicate assert or deassert
+ *
+ * This is a common internal function used to assert or deassert a device's
+ * reset using the TI SCI protocol. The device's reset is asserted if the
+ * @assert argument is true, or deasserted if @assert argument is false.
+ * The mechanism itself is a read-modify-write procedure, the current device
+ * reset register is read using a TI SCI device operation, the new value is
+ * set or un-set using the reset's mask, and the new reset value written by
+ * using another TI SCI device operation.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_set(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
+	struct ti_sci_reset_control *control;
+	u32 reset_state;
+	int ret;
+
+	control = idr_find(&data->idr, id);
+	if (!control)
+		return -EINVAL;
+
+	mutex_lock(&control->lock);
+
+	ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
+	if (ret)
+		goto out;
+
+	if (assert)
+		reset_state |= control->reset_mask;
+	else
+		reset_state &= ~control->reset_mask;
+
+	ret = dev_ops->set_device_resets(sci, control->dev_id, reset_state);
+out:
+	mutex_unlock(&control->lock);
+
+	return ret;
+}
+
+/**
+ * ti_sci_reset_assert() - assert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be asserted
+ *
+ * This function implements the reset driver op to assert a device's reset
+ * using the TI SCI protocol. This invokes the function ti_sci_reset_set()
+ * with the corresponding parameters as passed in, but with the @assert
+ * argument set to true for asserting the reset.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return ti_sci_reset_set(rcdev, id, true);
+}
+
+/**
+ * ti_sci_reset_deassert() - deassert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be deasserted
+ *
+ * This function implements the reset driver op to deassert a device's reset
+ * using the TI SCI protocol. This invokes the function ti_sci_reset_set()
+ * with the corresponding parameters as passed in, but with the @assert
+ * argument set to false for deasserting the reset.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return ti_sci_reset_set(rcdev, id, false);
+}
+
+/**
+ * ti_sci_reset_status() - check device reset status
+ * @rcdev: reset controller entity
+ * @id: ID of reset to be checked
+ *
+ * This function implements the reset driver op to return the status of a
+ * device's reset using the TI SCI protocol. The reset register value is read
+ * by invoking the TI SCI device operation .get_device_resets(), and the
+ * status of the specific reset is extracted and returned using this reset's
+ * reset mask.
+ *
+ * Return: 0 if reset is deasserted, or a non-zero value if reset is asserted
+ */
+static int ti_sci_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
+	struct ti_sci_reset_control *control;
+	u32 reset_state;
+	int ret;
+
+	control = idr_find(&data->idr, id);
+	if (!control)
+		return -EINVAL;
+
+	ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
+	if (ret)
+		return ret;
+
+	return reset_state & control->reset_mask;
+}
+
+static const struct reset_control_ops ti_sci_reset_ops = {
+	.assert		= ti_sci_reset_assert,
+	.deassert	= ti_sci_reset_deassert,
+	.status		= ti_sci_reset_status,
+};
+
+/**
+ * ti_sci_reset_of_xlate() - translate a set of OF arguments to a reset ID
+ * @rcdev: reset controller entity
+ * @reset_spec: OF reset argument specifier
+ *
+ * This function performs the translation of the reset argument specifier
+ * values defined in a reset consumer device node. The function allocates a
+ * reset control structure for that device reset, and will be used by the
+ * driver for performing any reset functions on that reset. An idr structure
+ * is allocated and used to map to the reset control structure. This idr
+ * is used by the driver to do reset lookups.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_of_xlate(struct reset_controller_dev *rcdev,
+				 const struct of_phandle_args *reset_spec)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	struct ti_sci_reset_control *control;
+
+	if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+		return -EINVAL;
+
+	control = devm_kzalloc(data->dev, sizeof(*control), GFP_KERNEL);
+	if (!control)
+		return -ENOMEM;
+
+	control->dev_id = reset_spec->args[0];
+	control->reset_mask = reset_spec->args[1];
+	mutex_init(&control->lock);
+
+	return idr_alloc(&data->idr, control, 0, 0, GFP_KERNEL);
+}
+
+static const struct of_device_id ti_sci_reset_of_match[] = {
+	{ .compatible = "ti,sci-reset", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_reset_of_match);
+
+static int ti_sci_reset_probe(struct platform_device *pdev)
+{
+	struct ti_sci_reset_data *data;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->sci = devm_ti_sci_get_handle(&pdev->dev);
+	if (IS_ERR(data->sci))
+		return PTR_ERR(data->sci);
+
+	data->rcdev.ops = &ti_sci_reset_ops;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.of_node = pdev->dev.of_node;
+	data->rcdev.of_reset_n_cells = 2;
+	data->rcdev.of_xlate = ti_sci_reset_of_xlate;
+	data->dev = &pdev->dev;
+	idr_init(&data->idr);
+
+	platform_set_drvdata(pdev, data);
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static int ti_sci_reset_remove(struct platform_device *pdev)
+{
+	struct ti_sci_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	idr_destroy(&data->idr);
+
+	return 0;
+}
+
+static struct platform_driver ti_sci_reset_driver = {
+	.probe = ti_sci_reset_probe,
+	.remove = ti_sci_reset_remove,
+	.driver = {
+		.name = "ti-sci-reset",
+		.of_match_table = ti_sci_reset_of_match,
+	},
+};
+module_platform_driver(ti_sci_reset_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <[email protected]>");
+MODULE_DESCRIPTION("TI System Control Interface (TI SCI) Reset driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/sti/reset-syscfg.c

@@ -145,16 +145,14 @@ static int syscfg_reset_controller_register(struct device *dev,
 				const struct syscfg_reset_controller_data *data)
 {
 	struct syscfg_reset_controller *rc;
-	size_t size;
 	int i, err;
 
 	rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
 	if (!rc)
 		return -ENOMEM;
 
-	size = sizeof(struct syscfg_reset_channel) * data->nr_channels;
-
-	rc->channels = devm_kzalloc(dev, size, GFP_KERNEL);
+	rc->channels = devm_kcalloc(dev, data->nr_channels,
+				    sizeof(*rc->channels), GFP_KERNEL);
 	if (!rc->channels)
 		return -ENOMEM;