From eaa6e050d005cb2d309680f1facff8fd20da4e8d Mon Sep 17 00:00:00 2001
From: Fenglin Wu <fenglinw@qti.qualcomm.com>
Date: Thu, 4 Mar 2021 15:47:42 +0800
Subject: [PATCH] ARM: dts: msm: add fixed-regulator to supply USB2 VBUS on
 Lahaina HHG

Lahaina HHG device has a built-in joystick connected on USB2 port, the
VBUS is supplied by a fixed-regulator controlled by PM8350 GPIO8 and its
output voltage needs to be enabled always. Add the regulator device node
and config it as always-on.

Change-Id: I4877be73294939e4823965795a00053ebd84e572
---
 qcom/lahaina-hhg.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/qcom/lahaina-hhg.dtsi b/qcom/lahaina-hhg.dtsi
index 34f46a9a2a32..81240c4e035c 100644
--- a/qcom/lahaina-hhg.dtsi
+++ b/qcom/lahaina-hhg.dtsi
@@ -91,6 +91,19 @@
 			status = "ok";
 		};
 	};
+
+	joystick_usb_vbus: joystick_usb_vbus_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "joystick_usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-enable-ramp-delay = <600>;
+		gpio = <&pm8350_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_boost_default>;
+	};
 };
 
 &usb1 {