arm/dts: config dtsi for charging DLKM

config moto common dtsi
for charging DLKM

Change-Id: I4915683c32e025759d76815b4c481d97bbc4035f
Signed-off-by: mahj8 <mahj8@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1786846
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This commit is contained in:
mahj8 2020-10-28 13:50:29 +08:00 • committed by panyq6
commit eb0b450025

View file

@ -320,6 +320,59 @@
qcom,usbpd-phandle = <&pm7250b_pdphy>;
};
&spmi_bus {
qcom,pm7250b@2 {
pm7250b_mmi: qcom,qpnp-smb5-mmi {
status = "ok"
compatible = "qcom,mmi-pm7250b-smb5";
#io-channel-cells = <1>;
io-channels = <&pm7250b_charger PSY_IIO_CTM_CURRENT_MAX>,
<&pm7250b_charger PSY_IIO_CURRENT_MAX>,
<&pm7250b_charger PSY_IIO_TYPEC_MODE>,
<&pm7250b_charger PSY_IIO_DP_DM>,
<&pm7250b_charger PSY_IIO_PD_ACTIVE>,
<&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
<&pm7250b_charger PSY_IIO_HW_CURRENT_MAX>,
<&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>,
<&pm7250b_charger PSY_IIO_RERUN_AICL>,
<&pm7250b_charger PSY_IIO_SW_JEITA_ENABLED>,
<&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
<&pm7250b_qg PSY_IIO_CURRENT_NOW>,
<&pm7250b_qg PSY_IIO_TEMP>,
<&pm7250b_qg PSY_IIO_CAPACITY>,
<&pm7250b_qg PSY_IIO_CHARGE_FULL>,
<&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>;
io-channel-names = "usb_ctm_current_max",
"main_current_max",
"usb_typec_mode",
"battery_dp_dm",
"usb_pd_active",
"usb_real_type",
"usb_hw_current_max",
"usb_input_current_settled",
"battery_rerun_aicl",
"battery_sw_jeita_enabled",
"voltage_now",
"current_now",
"temp",
"capacity",
"charge_full",
"charge_full_design";
qcom,enable-charging-limit;
qcom,upper-limit-capacity = <75>;
qcom,lower-limit-capacity = <60>;
qcom,mmi-temp-zones = <0 4200 970 0>,
<10 4200 2500 970>,
<15 0 2500 2500>,
<45 0 4000 4000>,
<60 4200 2500 0>;
qcom,iterm-ma = <242>;
qcom,vfloat-comp-uv = <20000>;
qcom,force-hvdcp-5v;
};
};
};
&pm7250b_qg {
status = "ok"
#io-channel-cells = <1>;