From eb43ccdf8aec07e4a52cb57d78db69fbe0da4282 Mon Sep 17 00:00:00 2001
From: houdz1 <houdz1@lenovo.com>
Date: Wed, 17 Nov 2021 16:38:32 +0800
Subject: [PATCH] Rhodep: dts/panel: add csot panel

Rhodep:
csot + nt37701 + dsc + 10bits

Change-Id: Ia2485132ec71d694872ba3f06f6cc51e7d0eafca
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2119028
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
---
 ...-nt37701-655-1080x2400-dsc-cmd-common.dtsi | 506 ++++++++++++++++++
 1 file changed, 506 insertions(+)
 create mode 100644 qcom/dsi-panel-mot-csot-nt37701-655-1080x2400-dsc-cmd-common.dtsi

diff --git a/qcom/dsi-panel-mot-csot-nt37701-655-1080x2400-dsc-cmd-common.dtsi b/qcom/dsi-panel-mot-csot-nt37701-655-1080x2400-dsc-cmd-common.dtsi
new file mode 100644
index 000000000000..16b0e576f2e1
--- /dev/null
+++ b/qcom/dsi-panel-mot-csot-nt37701-655-1080x2400-dsc-cmd-common.dtsi
@@ -0,0 +1,506 @@
+/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+&mdss_mdp {
+	mot_csot_nt37701_655_1080x2400_dsc_cmd_v0: qcom,mdss_dsi_mot_csot_nt37701_655_1080x2400_dsc_cmd_v0 {
+		compatible = "qcom,mdss-dsi-panel";
+		qcom,mdss-dsi-panel-name = "mipi_mot_cmd_csot_1080p_dsc_655";
+		qcom,mdss-dsi-panel-supplier = "csot";
+		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
+		qcom,mdss-dsi-virtual-channel-id = <0>;
+		qcom,mdss-dsi-stream = <0>;
+		qcom,mdss-pan-physical-width-dimension = <68>;
+		qcom,mdss-pan-physical-height-dimension = <152>;
+		qcom,mdss-dsi-bpp = <30>;
+		qcom,mdss-dsi-underflow-color = <0xff>;
+		qcom,mdss-dsi-border-color = <0>;
+		qcom,mdss-dsi-panel-param-verision = <121201>;
+		qcom,mdss-dsi-panel-param-num = <5>;
+
+		qcom,dsi-ctrl-num = <0>;
+		qcom,dsi-phy-num = <0>;
+
+		qcom,mdss-dsi-traffic-mode = "burst_mode";
+		qcom,mdss-dsi-bllp-eof-power-mode;
+		qcom,mdss-dsi-bllp-power-mode;
+		qcom,mdss-dsi-lane-0-state;
+		qcom,mdss-dsi-lane-1-state;
+		qcom,mdss-dsi-lane-2-state;
+		qcom,mdss-dsi-lane-3-state;
+
+		qcom,mdss-dsi-dma-trigger = "trigger_sw";
+		qcom,mdss-dsi-mdp-trigger = "none";
+		qcom,mdss-dsi-reset-sequence = <0 11>, <1 1>, <0 1>, <1 11>;
+		qcom,mdss-dsi-lp11-init;
+		qcom,mdss-dsi-tx-eot-append;
+		qcom,mdss-dsi-te-pin-select = <1>;
+		qcom,mdss-dsi-te-dcs-command = <1>;
+
+		qcom,mdss-dsi-te-using-te-pin;
+
+		qcom,bklt-dcs-2bytes-enabled;
+		qcom,mdss-dsi-bl-min-level = <3>;
+		qcom,mdss-dsi-bl-max-level = <4095>;
+		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
+
+		qcom,mdss-dsi-panel-hdr-enabled;
+		qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
+				17000 15500 30000 8000 3000>;
+		qcom,mdss-dsi-panel-peak-brightness = <4200000>;
+
+		qcom,mdss-dsi-panel-blackness-level = <3230>;
+
+		qcom,mdss-dsi-hbm-on-command = [
+				39 01 00 00 00 00 03 51 0F FF];
+		qcom,mdss-dsi-hbm-off-command = [
+				39 01 00 00 00 00 03 51 07 FF];
+
+		qcom,mdss-dsi-hbm-fod;
+		qcom,mdss-dsi-hbm-fod-on-command = [
+				39 01 00 00 00 00 03 51 0F FF];
+
+		//qcom,mdss-dsi-acl-on-command = [
+		//		39 01 00 00 00 00 06 F0 55 AA 52 08 00
+		//		15 00 00 00 00 00 02 B0 0C
+		//		15 01 00 00 00 00 02 55 05];
+		//qcom,mdss-dsi-acl-off-command = [
+		//		15 01 00 00 00 00 02 55 00];
+
+		qcom,mdss-dsi-dc-off-command = [
+				39 00 00 00 00 00 06 F0 55 AA 52 08 00
+				15 00 00 00 00 00 02 B2 18
+				15 00 00 00 00 00 02 6F 0F
+				39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
+				39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
+				15 00 00 00 00 00 02 6F 0C
+				39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
+				15 00 00 00 00 00 02 6F 18
+				39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+				15 01 00 00 00 00 02 58 00];
+		qcom,mdss-dsi-dc-off-command-state = "dsi_lp_mode";
+
+		qcom,mdss-dsi-dc-on-command = [
+				39 00 00 00 00 00 06 F0 55 AA 52 08 00
+				15 00 00 00 00 00 02 B2 98
+				15 00 00 00 00 00 02 6F 0F
+				39 00 00 00 00 00 09 B2 60 50 60 00 80 00 2F FF
+				39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
+				15 00 00 00 00 00 02 6F 0C
+				39 00 00 00 00 00 0D B3 00 00 00 00 00 00 00 00 00 00 00 00
+				15 00 00 00 00 00 02 6F 18
+				39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+				15 01 00 00 00 00 02 58 01];
+		qcom,mdss-dsi-dc-on-command-state = "dsi_lp_mode";
+
+		qcom,mdss-dsi-display-timings {
+			timing@0{
+				qcom,mdss-dsi-cmd-mode;
+				qcom,mdss-dsi-panel-framerate = <48>;
+				qcom,mdss-dsi-panel-width = <1080>;
+				qcom,mdss-dsi-panel-height = <2400>;
+				qcom,mdss-dsi-h-front-porch = <32>;
+				qcom,mdss-dsi-h-back-porch = <32>;
+				qcom,mdss-dsi-h-pulse-width = <16>;
+				qcom,mdss-dsi-h-sync-skew = <0>;
+				qcom,mdss-dsi-h-sync-pulse = <0>;
+				qcom,mdss-dsi-v-back-porch = <4>;
+				qcom,mdss-dsi-v-front-porch = <12>;
+				qcom,mdss-dsi-v-pulse-width = <4>;
+				qcom,mdss-dsi-h-left-border = <0>;
+				qcom,mdss-dsi-h-right-border = <0>;
+				qcom,mdss-dsi-v-top-border = <0>;
+				qcom,mdss-dsi-v-bottom-border = <0>;
+				qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
+				qcom,mdss-dsi-timing-switch-command = [
+					15 01 00 00 14 00 02 2F 08 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+				];
+
+				qcom,mdss-dsi-on-command = [
+					39 00 00 00 00 00 06 F0 55 AA 52 08 00
+					15 00 00 00 00 00 02 B2 18
+					15 00 00 00 00 00 02 6F 0F
+					39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
+					39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
+					15 00 00 00 00 00 02 6F 0C
+					39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
+					15 00 00 00 00 00 02 6F 18
+					39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+					15 01 00 00 00 00 02 58 00 //DC code
+
+					39 01 00 00 00 00 06 F0 55 AA 52 08 00
+					15 01 00 00 00 00 02 6F 1C
+					39 01 00 00 00 00 06 C0 15 27 38 49 00
+					39 01 00 00 00 00 06 F0 55 AA 52 08 04
+					15 01 00 00 00 00 02 CB 06
+					39 01 00 00 00 00 06 F0 55 AA 52 08 01
+					39 01 00 00 00 00 03 CD 05 71
+
+				        39 01 00 00 00 00 05 3B 00 1A 00 20
+
+					15 01 00 00 00 00 02 03 01
+					15 01 00 00 00 00 02 90 01
+					39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
+					15 01 00 00 00 00 02 2C 00 //dsc config 10bit
+
+					39 01 00 00 00 00 03 51 00 00
+					15 01 00 00 00 00 02 53 20
+					15 01 00 00 00 00 02 35 00 //te enable
+
+					39 01 00 00 00 00 05 2A 00 00 04 37
+					39 01 00 00 00 00 05 2B 00 00 09 5F
+
+					15 01 00 00 00 00 02 2F 08 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+
+					05 01 00 00 C8 00 01 11
+					05 01 00 00 00 00 01 29];	/* display on */
+				qcom,mdss-dsi-off-command = [
+					05 01 00 00 00 00 01 28		/* display_off */
+					05 01 00 00 78 00 01 10];	/* enter sleep mode */
+
+				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-timing-switch-command-state =
+					"dsi_lp_mode";
+				qcom,compression-mode = "dsc";
+				/* Why QCOM doesn't use this, even it used 2 encoder
+				 * as for that dsi_sw43404_amoled_cmd, for ex */
+				/* qcom,mdss-dsc-encoders = <2>; */
+				qcom,mdss-dsc-version = <0x11>;
+				qcom,mdss-dsc-slice-height = <12>;
+				qcom,mdss-dsc-slice-width = <1080>;
+				qcom,mdss-dsc-slice-per-pkt = <1>;
+				qcom,mdss-dsc-bit-per-component = <10>;
+				qcom,mdss-dsc-bit-per-pixel = <8>;
+				qcom,mdss-dsc-block-prediction-enable;
+			};
+			timing@1{
+				qcom,mdss-dsi-cmd-mode;
+				qcom,mdss-dsi-panel-framerate = <60>;
+				qcom,mdss-dsi-panel-width = <1080>;
+				qcom,mdss-dsi-panel-height = <2400>;
+				qcom,mdss-dsi-h-front-porch = <32>;
+				qcom,mdss-dsi-h-back-porch = <32>;
+				qcom,mdss-dsi-h-pulse-width = <16>;
+				qcom,mdss-dsi-h-sync-skew = <0>;
+				qcom,mdss-dsi-h-sync-pulse = <0>;
+				qcom,mdss-dsi-v-back-porch = <4>;
+				qcom,mdss-dsi-v-front-porch = <12>;
+				qcom,mdss-dsi-v-pulse-width = <4>;
+				qcom,mdss-dsi-h-left-border = <0>;
+				qcom,mdss-dsi-h-right-border = <0>;
+				qcom,mdss-dsi-v-top-border = <0>;
+				qcom,mdss-dsi-v-bottom-border = <0>;
+				qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
+				qcom,mdss-dsi-timing-switch-command = [
+					15 01 00 00 10 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+				];
+
+				qcom,mdss-dsi-on-command = [
+					39 00 00 00 00 00 06 F0 55 AA 52 08 00
+					15 00 00 00 00 00 02 B2 18
+					15 00 00 00 00 00 02 6F 0F
+					39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
+					39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
+					15 00 00 00 00 00 02 6F 0C
+					39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
+					15 00 00 00 00 00 02 6F 18
+					39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+					15 01 00 00 00 00 02 58 00 //DC code
+
+					39 01 00 00 00 00 06 F0 55 AA 52 08 00
+					15 01 00 00 00 00 02 6F 1C
+					39 01 00 00 00 00 06 C0 15 27 38 49 00
+					39 01 00 00 00 00 06 F0 55 AA 52 08 04
+					15 01 00 00 00 00 02 CB 06
+					39 01 00 00 00 00 06 F0 55 AA 52 08 01
+					39 01 00 00 00 00 03 CD 05 71
+
+				        39 01 00 00 00 00 05 3B 00 1A 00 20
+
+					15 01 00 00 00 00 02 03 01
+					15 01 00 00 00 00 02 90 01
+					39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
+					15 01 00 00 00 00 02 2C 00 //dsc config 10bit
+
+					39 01 00 00 00 00 03 51 00 00
+					15 01 00 00 00 00 02 53 20
+					15 01 00 00 00 00 02 35 00 //te enable
+
+					39 01 00 00 00 00 05 2A 00 00 04 37
+					39 01 00 00 00 00 05 2B 00 00 09 5F
+
+					15 01 00 00 00 00 02 2F 03 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+
+					05 01 00 00 6e 00 01 11
+					05 01 00 00 00 00 01 29];	/* display on */
+				qcom,mdss-dsi-off-command = [
+					05 01 00 00 00 00 01 28		/* display_off */
+					05 01 00 00 78 00 01 10];	/* enter sleep mode */
+
+				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-timing-switch-command-state =
+					"dsi_lp_mode";
+				qcom,compression-mode = "dsc";
+				/* Why QCOM doesn't use this, even it used 2 encoder
+				 * as for that dsi_sw43404_amoled_cmd, for ex */
+				/* qcom,mdss-dsc-encoders = <2>; */
+				qcom,mdss-dsc-version = <0x11>;
+				qcom,mdss-dsc-slice-height = <12>;
+				qcom,mdss-dsc-slice-width = <1080>;
+				qcom,mdss-dsc-slice-per-pkt = <1>;
+				qcom,mdss-dsc-bit-per-component = <10>;
+				qcom,mdss-dsc-bit-per-pixel = <8>;
+				qcom,mdss-dsc-block-prediction-enable;
+			};
+			timing@2{
+				qcom,mdss-dsi-cmd-mode;
+				qcom,mdss-dsi-panel-framerate = <90>;
+				qcom,mdss-dsi-panel-width = <1080>;
+				qcom,mdss-dsi-panel-height = <2400>;
+				qcom,mdss-dsi-h-front-porch = <32>;
+				qcom,mdss-dsi-h-back-porch = <32>;
+				qcom,mdss-dsi-h-pulse-width = <16>;
+				qcom,mdss-dsi-h-sync-skew = <0>;
+				qcom,mdss-dsi-h-sync-pulse = <0>;
+				qcom,mdss-dsi-v-back-porch = <4>;
+				qcom,mdss-dsi-v-front-porch = <12>;
+				qcom,mdss-dsi-v-pulse-width = <4>;
+				qcom,mdss-dsi-h-left-border = <0>;
+				qcom,mdss-dsi-h-right-border = <0>;
+				qcom,mdss-dsi-v-top-border = <0>;
+				qcom,mdss-dsi-v-bottom-border = <0>;
+				qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
+				qcom,mdss-dsi-timing-switch-command = [
+					15 01 00 00 0b 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+				];
+
+				qcom,mdss-dsi-on-command = [
+					39 00 00 00 00 00 06 F0 55 AA 52 08 00
+					15 00 00 00 00 00 02 B2 18
+					15 00 00 00 00 00 02 6F 0F
+					39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
+					39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
+					15 00 00 00 00 00 02 6F 0C
+					39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
+					15 00 00 00 00 00 02 6F 18
+					39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+					15 01 00 00 00 00 02 58 00 //DC code
+
+					39 01 00 00 00 00 06 F0 55 AA 52 08 00
+					15 01 00 00 00 00 02 6F 1C
+					39 01 00 00 00 00 06 C0 15 27 38 49 00
+					39 01 00 00 00 00 06 F0 55 AA 52 08 04
+					15 01 00 00 00 00 02 CB 06
+					39 01 00 00 00 00 06 F0 55 AA 52 08 01
+					39 01 00 00 00 00 03 CD 05 71
+
+				        39 01 00 00 00 00 05 3B 00 1A 00 20
+
+					15 01 00 00 00 00 02 03 01
+					15 01 00 00 00 00 02 90 01
+					39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
+					15 01 00 00 00 00 02 2C 00 //dsc config 10bit
+
+					39 01 00 00 00 00 03 51 00 00
+					15 01 00 00 00 00 02 53 20
+					15 01 00 00 00 00 02 35 00 //te enable
+
+					39 01 00 00 00 00 05 2A 00 00 04 37
+					39 01 00 00 00 00 05 2B 00 00 09 5F
+
+					15 01 00 00 00 00 02 2F 07 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+
+					05 01 00 00 56 00 01 11
+					05 01 00 00 00 00 01 29];	/* display on */
+				qcom,mdss-dsi-off-command = [
+					05 01 00 00 00 00 01 28		/* display_off */
+					05 01 00 00 78 00 01 10];	/* enter sleep mode */
+
+				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-timing-switch-command-state =
+					"dsi_lp_mode";
+				qcom,compression-mode = "dsc";
+				/* Why QCOM doesn't use this, even it used 2 encoder
+				 * as for that dsi_sw43404_amoled_cmd, for ex */
+				/* qcom,mdss-dsc-encoders = <2>; */
+				qcom,mdss-dsc-version = <0x11>;
+				qcom,mdss-dsc-slice-height = <12>;
+				qcom,mdss-dsc-slice-width = <1080>;
+				qcom,mdss-dsc-slice-per-pkt = <1>;
+				qcom,mdss-dsc-bit-per-component = <10>;
+				qcom,mdss-dsc-bit-per-pixel = <8>;
+				qcom,mdss-dsc-block-prediction-enable;
+			};
+			timing@3{
+				qcom,mdss-dsi-cmd-mode;
+				qcom,mdss-dsi-panel-framerate = <120>;
+				qcom,mdss-dsi-panel-width = <1080>;
+				qcom,mdss-dsi-panel-height = <2400>;
+				qcom,mdss-dsi-h-front-porch = <32>;
+				qcom,mdss-dsi-h-back-porch = <32>;
+				qcom,mdss-dsi-h-pulse-width = <16>;
+				qcom,mdss-dsi-h-sync-skew = <0>;
+				qcom,mdss-dsi-h-sync-pulse = <0>;
+				qcom,mdss-dsi-v-back-porch = <4>;
+				qcom,mdss-dsi-v-front-porch = <12>;
+				qcom,mdss-dsi-v-pulse-width = <4>;
+				qcom,mdss-dsi-h-left-border = <0>;
+				qcom,mdss-dsi-h-right-border = <0>;
+				qcom,mdss-dsi-v-top-border = <0>;
+				qcom,mdss-dsi-v-bottom-border = <0>;
+				qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
+				qcom,mdss-dsi-timing-switch-command = [
+					15 01 00 00 08 00 02 2F 02 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+				];
+
+				qcom,mdss-dsi-on-command = [
+					39 00 00 00 00 00 06 F0 55 AA 52 08 00
+					15 00 00 00 00 00 02 B2 18
+					15 00 00 00 00 00 02 6F 0F
+					39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
+					39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
+					15 00 00 00 00 00 02 6F 0C
+					39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
+					15 00 00 00 00 00 02 6F 18
+					39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+					15 01 00 00 00 00 02 58 00 //DC code
+
+					39 01 00 00 00 00 06 F0 55 AA 52 08 00
+					15 01 00 00 00 00 02 6F 1C
+					39 01 00 00 00 00 06 C0 15 27 38 49 00
+					39 01 00 00 00 00 06 F0 55 AA 52 08 04
+					15 01 00 00 00 00 02 CB 06
+					39 01 00 00 00 00 06 F0 55 AA 52 08 01
+					39 01 00 00 00 00 03 CD 05 71
+
+				        39 01 00 00 00 00 05 3B 00 1A 00 20
+
+					15 01 00 00 00 00 02 03 01
+					15 01 00 00 00 00 02 90 01
+					39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
+					15 01 00 00 00 00 02 2C 00 //dsc config 10bit
+
+					39 01 00 00 00 00 03 51 00 00
+					15 01 00 00 00 00 02 53 20
+					15 01 00 00 00 00 02 35 00 //te enable
+
+					39 01 00 00 00 00 05 2A 00 00 04 37
+					39 01 00 00 00 00 05 2B 00 00 09 5F
+
+					15 01 00 00 00 00 02 2F 02 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+
+					05 01 00 00 56 00 01 11
+					05 01 00 00 00 00 01 29];	/* display on */
+				qcom,mdss-dsi-off-command = [
+					05 01 00 00 00 00 01 28		/* display_off */
+					05 01 00 00 78 00 01 10];	/* enter sleep mode */
+
+				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-timing-switch-command-state =
+					"dsi_lp_mode";
+				qcom,compression-mode = "dsc";
+				/* Why QCOM doesn't use this, even it used 2 encoder
+				 * as for that dsi_sw43404_amoled_cmd, for ex */
+				/* qcom,mdss-dsc-encoders = <2>; */
+				qcom,mdss-dsc-version = <0x11>;
+				qcom,mdss-dsc-slice-height = <12>;
+				qcom,mdss-dsc-slice-width = <1080>;
+				qcom,mdss-dsc-slice-per-pkt = <1>;
+				qcom,mdss-dsc-bit-per-component = <10>;
+				qcom,mdss-dsc-bit-per-pixel = <8>;
+				qcom,mdss-dsc-block-prediction-enable;
+			};
+			timing@4{
+				qcom,mdss-dsi-cmd-mode;
+				qcom,mdss-dsi-panel-framerate = <144>;
+				qcom,mdss-dsi-panel-width = <1080>;
+				qcom,mdss-dsi-panel-height = <2400>;
+				qcom,mdss-dsi-h-front-porch = <32>;
+				qcom,mdss-dsi-h-back-porch = <32>;
+				qcom,mdss-dsi-h-pulse-width = <16>;
+				qcom,mdss-dsi-h-sync-skew = <0>;
+				qcom,mdss-dsi-h-sync-pulse = <0>;
+				qcom,mdss-dsi-v-back-porch = <4>;
+				qcom,mdss-dsi-v-front-porch = <12>;
+				qcom,mdss-dsi-v-pulse-width = <4>;
+				qcom,mdss-dsi-h-left-border = <0>;
+				qcom,mdss-dsi-h-right-border = <0>;
+				qcom,mdss-dsi-v-top-border = <0>;
+				qcom,mdss-dsi-v-bottom-border = <0>;
+				qcom,mdss-dsi-panel-jitter = <0x20 0xa>; /* 90fps +/- 2 */
+				qcom,mdss-dsi-timing-switch-command = [
+					15 01 00 00 06 00 02 2F 04 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+				];
+
+				qcom,mdss-dsi-on-command = [
+					39 00 00 00 00 00 06 F0 55 AA 52 08 00
+					15 00 00 00 00 00 02 B2 18
+					15 00 00 00 00 00 02 6F 0F
+					39 00 00 00 00 00 09 B2 60 50 65 E9 85 E9 2F FF
+					39 00 00 00 00 00 0D B3 00 01 01 59 01 59 02 1A 02 1A 03 0A
+					15 00 00 00 00 00 02 6F 0C
+					39 00 00 00 00 00 0D B3 03 0A 04 00 04 00 05 E9 05 E9 05 EA
+					15 00 00 00 00 00 02 6F 18
+					39 00 00 00 00 00 0D B3 05 EA 09 08 09 08 0D BB 0D BB 0F FF
+					15 01 00 00 00 00 02 58 00 //DC code
+
+					39 01 00 00 00 00 06 F0 55 AA 52 08 00
+					15 01 00 00 00 00 02 6F 1C
+					39 01 00 00 00 00 06 C0 15 27 38 49 00
+					39 01 00 00 00 00 06 F0 55 AA 52 08 04
+					15 01 00 00 00 00 02 CB 06
+					39 01 00 00 00 00 06 F0 55 AA 52 08 01
+					39 01 00 00 00 00 03 CD 05 71
+
+				        39 01 00 00 00 00 05 3B 00 1A 00 20
+
+					15 01 00 00 00 00 02 03 01
+					15 01 00 00 00 00 02 90 01
+					39 01 00 00 00 00 13 91 AB 28 00 0C C2 00 03 1C 01 7E 00 0F 08 BB 04 3D 10 F0
+					15 01 00 00 00 00 02 2C 00 //dsc config 10bit
+
+					39 01 00 00 00 00 03 51 00 00
+					15 01 00 00 00 00 02 53 20
+					15 01 00 00 00 00 02 35 00 //te enable
+
+					39 01 00 00 00 00 05 2A 00 00 04 37
+					39 01 00 00 00 00 05 2B 00 00 09 5F
+
+					15 01 00 00 00 00 02 2F 04 //08:49Hz 03:60Hz 07:90Hz 02:120Hz 04:144Hz
+
+					05 01 00 00 56 00 01 11
+					05 01 00 00 00 00 01 29];	/* display on */
+				qcom,mdss-dsi-off-command = [
+					05 01 00 00 00 00 01 28		/* display_off */
+					05 01 00 00 78 00 01 10];	/* enter sleep mode */
+
+				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
+				qcom,mdss-dsi-timing-switch-command-state =
+					"dsi_lp_mode";
+				qcom,compression-mode = "dsc";
+				/* Why QCOM doesn't use this, even it used 2 encoder
+				 * as for that dsi_sw43404_amoled_cmd, for ex */
+				/* qcom,mdss-dsc-encoders = <2>; */
+				qcom,mdss-dsc-version = <0x11>;
+				qcom,mdss-dsc-slice-height = <12>;
+				qcom,mdss-dsc-slice-width = <1080>;
+				qcom,mdss-dsc-slice-per-pkt = <1>;
+				qcom,mdss-dsc-bit-per-component = <10>;
+				qcom,mdss-dsc-bit-per-pixel = <8>;
+				qcom,mdss-dsc-block-prediction-enable;
+			};
+		};
+	};
+};