From aa40438c7174cba9ceccd5b5e0bed1f5d0f90465 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Fri, 24 Sep 2021 15:43:35 -0700 Subject: [PATCH 01/69] ocfs2: drop acl cache for directories too commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream. ocfs2_data_convert_worker() is currently dropping any cached acl info for FILE before down-converting meta lock. It should also drop for DIRECTORY. Otherwise the second acl lookup returns the cached one (from VFS layer) which could be already stale. The problem we are seeing is that the acl changes on one node doesn't get refreshed on other nodes in the following case: Node 1 Node 2 -------------- ---------------- getfacl dir1 getfacl dir1 <-- this is OK setfacl -m u:user1:rwX dir1 getfacl dir1 <-- see the change for user1 getfacl dir1 <-- can't see change for user1 Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/dlmglue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 50a863fc1779..207ec61569ea 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3933,7 +3933,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, oi = OCFS2_I(inode); oi->ip_dir_lock_gen++; mlog(0, "generation: %u\n", oi->ip_dir_lock_gen); - goto out; + goto out_forget; } if (!S_ISREG(inode->i_mode)) @@ -3964,6 +3964,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, filemap_fdatawait(mapping); } +out_forget: forget_all_cached_acls(inode); out: From f013a5001b4a01d788ce3714de8189d615b41b00 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 12:42:21 +0300 Subject: [PATCH 02/69] usb: gadget: r8a66597: fix a loop in set_feature() commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream. This loop is supposed to loop until if reads something other than CS_IDST or until it times out after 30,000 attempts. But because of the || vs && bug, it will never time out and instead it will loop a minimum of 30,000 times. This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE so it probably doesn't affect regular usage. Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE") Cc: stable Reviewed-by: Yoshihiro Shimoda Acked-by: Felipe Balbi Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210906094221.GA10957@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/r8a66597-udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index a766476fd742..ca0aebb5bd0c 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1250,7 +1250,7 @@ static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl) do { tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ; udelay(1); - } while (tmp != CS_IDST || timeout-- > 0); + } while (tmp != CS_IDST && timeout-- > 0); if (tmp == CS_IDST) r8a66597_bset(r8a66597, From ff275c870e1b8365b0c1844b0b9da37c79cb9789 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Thu, 9 Sep 2021 14:45:15 +0400 Subject: [PATCH 03/69] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave commit 91bb163e1e4f88092f50dfaa5a816b658753e4b2 upstream. According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan Cc: stable Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 191 +++++++++++++++++++++----------------- 1 file changed, 107 insertions(+), 84 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 66dfcdbd1e03..d113f0ac0ea8 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) */ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + hs_ep->target_frame += hs_ep->interval; - if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + if (hs_ep->target_frame > limit) { hs_ep->frame_overrun = true; - hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + hs_ep->target_frame &= limit; } else { hs_ep->frame_overrun = false; } @@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) */ static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + if (hs_ep->target_frame) hs_ep->target_frame -= 1; else - hs_ep->target_frame = DSTS_SOFFN_LIMIT; + hs_ep->target_frame = limit; } /** @@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, depctl); } +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep); +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result); + /** * dwc2_hsotg_start_req - start a USB request from an endpoint's queue * @hsotg: The controller state. @@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, } } - if (hs_ep->isochronous && hs_ep->interval == 1) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); - dwc2_gadget_incr_frame_num(hs_ep); - - if (hs_ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + if (hs_ep->isochronous) { + if (!dwc2_gadget_target_frame_elapsed(hs_ep)) { + if (hs_ep->interval == 1) { + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + ctrl |= DXEPCTL_CNAK; + } else { + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + return; + } } ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ @@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) u32 target_frame = hs_ep->target_frame; u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; if (!frame_overrun && current_frame >= target_frame) return true; if (frame_overrun && current_frame >= target_frame && - ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2)) + ((current_frame - target_frame) < limit / 2)) return true; return false; @@ -1712,11 +1739,9 @@ static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep) */ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) { - u32 mask; struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; struct dwc2_hsotg_req *hs_req; - u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; if (!list_empty(&hs_ep->queue)) { hs_req = get_ep_head(hs_ep); @@ -1732,9 +1757,6 @@ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) } else { dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n", __func__); - mask = dwc2_readl(hsotg, epmsk_reg); - mask |= DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, mask, epmsk_reg); } } @@ -2304,19 +2326,6 @@ static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); } -static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg, - u32 epctl_reg) -{ - u32 ctrl; - - ctrl = dwc2_readl(hsotg, epctl_reg); - if (ctrl & DXEPCTL_EOFRNUM) - ctrl |= DXEPCTL_SETEVENFR; - else - ctrl |= DXEPCTL_SETODDFR; - dwc2_writel(hsotg, ctrl, epctl_reg); -} - /* * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc * @hs_ep - The endpoint on which transfer went @@ -2437,20 +2446,11 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) dwc2_hsotg_ep0_zlp(hsotg, true); } - /* - * Slave mode OUT transfers do not go through XferComplete so - * adjust the ISOC parity here. - */ - if (!using_dma(hsotg)) { - if (hs_ep->isochronous && hs_ep->interval == 1) - dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum)); - else if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - } - /* Set actual frame number for completed transfers */ - if (!using_desc_dma(hsotg) && hs_ep->isochronous) - req->frame_number = hsotg->frame_number; + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + req->frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result); } @@ -2764,6 +2764,12 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, return; } + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + hs_req->req.frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); } @@ -2824,23 +2830,18 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); - if (hs_ep->isochronous) { - dwc2_hsotg_complete_in(hsotg, hs_ep); - return; - } - if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { int dctl = dwc2_readl(hsotg, DCTL); dctl |= DCTL_CGNPINNAK; dwc2_writel(hsotg, dctl, DCTL); } - return; - } + } else { - if (dctl & DCTL_GOUTNAKSTS) { - dctl |= DCTL_CGOUTNAK; - dwc2_writel(hsotg, dctl, DCTL); + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(hsotg, dctl, DCTL); + } } if (!hs_ep->isochronous) @@ -2861,8 +2862,6 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /* Update current frame number value. */ hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); - - dwc2_gadget_start_next_request(hs_ep); } /** @@ -2879,8 +2878,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) { struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = ep->dir_in; - u32 doepmsk; if (dir_in || !ep->isochronous) return; @@ -2894,28 +2893,39 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) return; } - if (ep->interval > 1 && - ep->target_frame == TARGET_FRAME_INITIAL) { + if (ep->target_frame == TARGET_FRAME_INITIAL) { u32 ctrl; ep->target_frame = hsotg->frame_number; - dwc2_gadget_incr_frame_num(ep); + if (ep->interval > 1) { + ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; - ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); - if (ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; - - dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + } } - dwc2_gadget_start_next_request(ep); - doepmsk = dwc2_readl(hsotg, DOEPMSK); - doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, doepmsk, DOEPMSK); + while (dwc2_gadget_target_frame_elapsed(ep)) { + hs_req = get_ep_head(ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); + + dwc2_gadget_incr_frame_num(ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!ep->req) + dwc2_gadget_start_next_request(ep); + } +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep); + /** * dwc2_gadget_handle_nak - handle NAK interrupt * @hs_ep: The endpoint on which interrupt is asserted. @@ -2933,7 +2943,9 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = hs_ep->dir_in; + u32 ctrl; if (!dir_in || !hs_ep->isochronous) return; @@ -2975,13 +2987,29 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index)); } - - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); } - if (!using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) + return; + + ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index)); + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + else + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + hs_req = get_ep_head(hs_ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!hs_ep->req) + dwc2_gadget_start_next_request(hs_ep); } /** @@ -3048,12 +3076,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * need to look at completing IN requests here * if operating slave mode */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_complete_in(hsotg, hs_ep); - if (ints & DXEPINT_NAKINTRPT) - ints &= ~DXEPINT_NAKINTRPT; + if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT)) + dwc2_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) dwc2_hsotg_enqueue_setup(hsotg); @@ -3062,10 +3086,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * We're using DMA, we need to fire an OutDone here * as we ignore the RXFIFO. */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_handle_outdone(hsotg, idx); + if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS)) + dwc2_hsotg_handle_outdone(hsotg, idx); } } @@ -4055,6 +4077,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, mask |= DIEPMSK_NAKMSK; dwc2_writel(hsotg, mask, DIEPMSK); } else { + epctrl |= DXEPCTL_SNAK; mask = dwc2_readl(hsotg, DOEPMSK); mask |= DOEPMSK_OUTTKNEPDISMSK; dwc2_writel(hsotg, mask, DOEPMSK); From b8c806065160885bfaa64b2d35aa9964457d43a6 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Sat, 11 Sep 2021 22:58:30 +0400 Subject: [PATCH 04/69] usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA commit dbe2518b2d8eabffa74dbf7d9fdd7dacddab7fc0 upstream. When last descriptor in a descriptor list completed with XferComplete interrupt, core switching to handle next descriptor and assert BNA interrupt. Both these interrupts are set while dwc2_hsotg_epint() handler called. Each interrupt should be handled separately: first XferComplete interrupt then BNA interrupt, otherwise last completed transfer will not be giveback to function driver as completed request. Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow") Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index d113f0ac0ea8..e8b25dae0949 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3067,9 +3067,7 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, /* In DDMA handle isochronous requests separately */ if (using_desc_dma(hsotg) && hs_ep->isochronous) { - /* XferCompl set along with BNA */ - if (!(ints & DXEPINT_BNAINTR)) - dwc2_gadget_complete_isoc_request_ddma(hs_ep); + dwc2_gadget_complete_isoc_request_ddma(hs_ep); } else if (dir_in) { /* * We get OutDone from the FIFO, so we only From b1f6efa27b242fa80b842be6568b5e2c7ee4a43a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:57:37 +0300 Subject: [PATCH 05/69] usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream. This is writing to the first 1 - 3 bytes of "val" and then writing all four bytes to musb_writel(). The last byte is always going to be garbage. Zero out the last bytes instead. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20210916135737.GI25094@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 39453287b5c3..4ecfbf6bb1fa 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -190,6 +190,7 @@ tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len) } if (len > 0) { /* Write the rest 1 - 3 bytes to FIFO */ + val = 0; memcpy(&val, buf, len); musb_writel(fifo, 0, val); } From 8b06b0f17f359f9dd99ad4af1282e90b0d4bdff3 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 19:18:37 -0500 Subject: [PATCH 06/69] cifs: fix incorrect check for null pointer in header_assemble commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream. Although very unlikely that the tlink pointer would be null in this case, get_next_mid function can in theory return null (but not an error) so need to check for null (not for IS_ERR, which can not be returned here). Address warning: fs/smbfs_client/connect.c:2392 cifs_match_super() warn: 'tlink' isn't an ERR_PTR Pointed out by Dan Carpenter via smatch code analysis tool CC: stable@vger.kernel.org Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/cifs/connect.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index da0720f41ebc..86bdebd2ece6 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3691,9 +3691,10 @@ cifs_match_super(struct super_block *sb, void *data) spin_lock(&cifs_tcp_ses_lock); cifs_sb = CIFS_SB(sb); tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb)); - if (IS_ERR(tlink)) { + if (tlink == NULL) { + /* can not match superblock if tlink were ever null */ spin_unlock(&cifs_tcp_ses_lock); - return rc; + return 0; } tcon = tlink_tcon(tlink); ses = tcon->ses; From d4e7647695c9b8cd7e75a208f0fd170bc15c50f1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 20 Sep 2021 18:15:11 +0200 Subject: [PATCH 07/69] xen/x86: fix PV trap handling on secondary processors commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream. The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman --- arch/x86/xen/enlighten_pv.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index b99074ca5e68..65cf405cd975 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -727,8 +727,8 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) preempt_enable(); } -static void xen_convert_trap_info(const struct desc_ptr *desc, - struct trap_info *traps) +static unsigned xen_convert_trap_info(const struct desc_ptr *desc, + struct trap_info *traps, bool full) { unsigned in, out, count; @@ -738,17 +738,18 @@ static void xen_convert_trap_info(const struct desc_ptr *desc, for (in = out = 0; in < count; in++) { gate_desc *entry = (gate_desc *)(desc->address) + in; - if (cvt_gate_to_trap(in, entry, &traps[out])) + if (cvt_gate_to_trap(in, entry, &traps[out]) || full) out++; } - traps[out].address = 0; + + return out; } void xen_copy_trap_info(struct trap_info *traps) { const struct desc_ptr *desc = this_cpu_ptr(&idt_desc); - xen_convert_trap_info(desc, traps); + xen_convert_trap_info(desc, traps, true); } /* Load a new IDT into Xen. In principle this can be per-CPU, so we @@ -758,6 +759,7 @@ static void xen_load_idt(const struct desc_ptr *desc) { static DEFINE_SPINLOCK(lock); static struct trap_info traps[257]; + unsigned out; trace_xen_cpu_load_idt(desc); @@ -765,7 +767,8 @@ static void xen_load_idt(const struct desc_ptr *desc) memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc)); - xen_convert_trap_info(desc, traps); + out = xen_convert_trap_info(desc, traps, false); + memset(&traps[out], 0, sizeof(traps[0])); xen_mc_flush(); if (HYPERVISOR_set_trap_table(traps)) From 85d3493085abfd364d7f324bb3c9694a576597f4 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 13 Sep 2021 23:01:06 +0200 Subject: [PATCH 08/69] usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream. ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has broken tag handling, preventing the device from working at all: usb 1-1: new full-speed USB device number 2 using uhci_hcd usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60 usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 usb 1-1: Product: USB Device usb 1-1: Manufacturer: USB Device usb-storage 1-1:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address. 2.6c is the only firmware that claims Linux compatibility. The firmware can be upgraded using ezotgdbg utility: https://github.com/asciilifeform/ezotgdbg Acked-by: Alan Stern Signed-off-by: Ondrej Zary Cc: stable Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 861153d294b6..7442793fe050 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -416,9 +416,16 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), /* - * Reported by Ondrej Zary + * Reported by Ondrej Zary * The device reports one sector more and breaks when that sector is accessed + * Firmwares older than 2.6c (the latest one and the only that claims Linux + * support) have also broken tag handling */ +UNUSUAL_DEV( 0x04ce, 0x0002, 0x0000, 0x026b, + "ScanLogic", + "SL11R-IDE", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, "ScanLogic", "SL11R-IDE", From 0dc1cfa7b9070081f942edb1beffb1e8beedc8a4 Mon Sep 17 00:00:00 2001 From: Uwe Brandt Date: Tue, 21 Sep 2021 19:54:46 +0200 Subject: [PATCH 09/69] USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream. Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8e5878ec656d..004b6598706b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -234,6 +234,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */ { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ From 93fa08e9a32f46c34334cfad77baedcc843f65ab Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 7 Sep 2021 10:23:18 +0200 Subject: [PATCH 10/69] USB: cdc-acm: fix minor-number release commit 91fac0741d4817945c6ee0a17591421e7f5ecb86 upstream. If the driver runs out of minor numbers it would release minor 0 and allow another device to claim the minor while still in use. Fortunately, registering the tty class device of the second device would fail (with a stack dump) due to the sysfs name collision so no memory is leaked. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++++-- drivers/usb/class/cdc-acm.h | 2 ++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c0604c60ebd0..e139cda35f63 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -725,7 +725,8 @@ static void acm_port_destruct(struct tty_port *port) { struct acm *acm = container_of(port, struct acm, port); - acm_release_minor(acm); + if (acm->minor != ACM_MINOR_INVALID) + acm_release_minor(acm); usb_put_intf(acm->control); kfree(acm->country_codes); kfree(acm); @@ -1356,8 +1357,10 @@ made_compressed_probe: usb_get_intf(acm->control); /* undone in destruct() */ minor = acm_alloc_minor(acm); - if (minor < 0) + if (minor < 0) { + acm->minor = ACM_MINOR_INVALID; goto alloc_fail1; + } acm->minor = minor; acm->dev = usb_dev; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index b95ff769072e..ef7fe5eacff6 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -22,6 +22,8 @@ #define ACM_TTY_MAJOR 166 #define ACM_TTY_MINORS 256 +#define ACM_MINOR_INVALID ACM_TTY_MINORS + /* * Requests. */ From aa2c274c279ff365a06a4cba263f04965895166e Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Mon, 30 Aug 2021 12:51:46 -0700 Subject: [PATCH 11/69] binder: make sure fd closes complete commit 5fdb55c1ac9585eb23bb2541d5819224429e103d upstream. During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling. Fixes: 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()") Cc: stable Reviewed-by: Martijn Coenen Acked-by: Christian Brauner Signed-off-by: Todd Kjos Link: https://lore.kernel.org/r/20210830195146.587206-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 89b590c9573f..4eaef780844e 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2239,6 +2239,7 @@ static void binder_deferred_fd_close(int fd) } static void binder_transaction_buffer_release(struct binder_proc *proc, + struct binder_thread *thread, struct binder_buffer *buffer, binder_size_t failed_at, bool is_failure) @@ -2398,8 +2399,16 @@ static void binder_transaction_buffer_release(struct binder_proc *proc, &proc->alloc, &fd, buffer, offset, sizeof(fd)); WARN_ON(err); - if (!err) + if (!err) { binder_deferred_fd_close(fd); + /* + * Need to make sure the thread goes + * back to userspace to complete the + * deferred close + */ + if (thread) + thread->looper_need_return = true; + } } } break; default: @@ -3469,7 +3478,7 @@ err_bad_parent: err_copy_data_failed: binder_free_txn_fixups(t); trace_binder_transaction_failed_buffer_release(t->buffer); - binder_transaction_buffer_release(target_proc, t->buffer, + binder_transaction_buffer_release(target_proc, NULL, t->buffer, buffer_offset, true); if (target_node) binder_dec_node_tmpref(target_node); @@ -3546,7 +3555,9 @@ err_invalid_target_handle: * Cleanup buffer and free it. */ static void -binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer) +binder_free_buf(struct binder_proc *proc, + struct binder_thread *thread, + struct binder_buffer *buffer) { binder_inner_proc_lock(proc); if (buffer->transaction) { @@ -3574,7 +3585,7 @@ binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer) binder_node_inner_unlock(buf_node); } trace_binder_transaction_buffer_release(buffer); - binder_transaction_buffer_release(proc, buffer, 0, false); + binder_transaction_buffer_release(proc, thread, buffer, 0, false); binder_alloc_free_buf(&proc->alloc, buffer); } @@ -3775,7 +3786,7 @@ static int binder_thread_write(struct binder_proc *proc, proc->pid, thread->pid, (u64)data_ptr, buffer->debug_id, buffer->transaction ? "active" : "finished"); - binder_free_buf(proc, buffer); + binder_free_buf(proc, thread, buffer); break; } @@ -4463,7 +4474,7 @@ retry: buffer->transaction = NULL; binder_cleanup_transaction(t, "fd fixups failed", BR_FAILED_REPLY); - binder_free_buf(proc, buffer); + binder_free_buf(proc, thread, buffer); binder_debug(BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n", proc->pid, thread->pid, From 4dc56951a8d9d61d364d346c61a5f1d70b4f5e14 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Sep 2021 14:45:38 +0200 Subject: [PATCH 12/69] staging: greybus: uart: fix tty use after free commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream. User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. Fixes: a18e15175708 ("greybus: more uart work") Cc: stable@vger.kernel.org # 4.9 Reviewed-by: Alex Elder Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/uart.c | 62 ++++++++++++++++++---------------- 1 file changed, 32 insertions(+), 30 deletions(-) diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index fc1bd68889c9..0e6bebc20695 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -789,6 +789,17 @@ out: gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev); } +static void gb_tty_port_destruct(struct tty_port *port) +{ + struct gb_tty *gb_tty = container_of(port, struct gb_tty, port); + + if (gb_tty->minor != GB_NUM_MINORS) + release_minor(gb_tty); + kfifo_free(&gb_tty->write_fifo); + kfree(gb_tty->buffer); + kfree(gb_tty); +} + static const struct tty_operations gb_ops = { .install = gb_tty_install, .open = gb_tty_open, @@ -814,6 +825,7 @@ static const struct tty_port_operations gb_port_ops = { .dtr_rts = gb_tty_dtr_rts, .activate = gb_tty_port_activate, .shutdown = gb_tty_port_shutdown, + .destruct = gb_tty_port_destruct, }; static int gb_uart_probe(struct gbphy_device *gbphy_dev, @@ -826,17 +838,11 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, int retval; int minor; - gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); - if (!gb_tty) - return -ENOMEM; - connection = gb_connection_create(gbphy_dev->bundle, le16_to_cpu(gbphy_dev->cport_desc->id), gb_uart_request_handler); - if (IS_ERR(connection)) { - retval = PTR_ERR(connection); - goto exit_tty_free; - } + if (IS_ERR(connection)) + return PTR_ERR(connection); max_payload = gb_operation_get_payload_size_max(connection); if (max_payload < sizeof(struct gb_uart_send_data_request)) { @@ -844,13 +850,23 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, goto exit_connection_destroy; } + gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); + if (!gb_tty) { + retval = -ENOMEM; + goto exit_connection_destroy; + } + + tty_port_init(&gb_tty->port); + gb_tty->port.ops = &gb_port_ops; + gb_tty->minor = GB_NUM_MINORS; + gb_tty->buffer_payload_max = max_payload - sizeof(struct gb_uart_send_data_request); gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL); if (!gb_tty->buffer) { retval = -ENOMEM; - goto exit_connection_destroy; + goto exit_put_port; } INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work); @@ -858,7 +874,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE, GFP_KERNEL); if (retval) - goto exit_buf_free; + goto exit_put_port; gb_tty->credits = GB_UART_FIRMWARE_CREDITS; init_completion(&gb_tty->credits_complete); @@ -872,7 +888,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, } else { retval = minor; } - goto exit_kfifo_free; + goto exit_put_port; } gb_tty->minor = minor; @@ -881,9 +897,6 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, init_waitqueue_head(&gb_tty->wioctl); mutex_init(&gb_tty->mutex); - tty_port_init(&gb_tty->port); - gb_tty->port.ops = &gb_port_ops; - gb_tty->connection = connection; gb_tty->gbphy_dev = gbphy_dev; gb_connection_set_data(connection, gb_tty); @@ -891,7 +904,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, retval = gb_connection_enable_tx(connection); if (retval) - goto exit_release_minor; + goto exit_put_port; send_control(gb_tty, gb_tty->ctrlout); @@ -918,16 +931,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, exit_connection_disable: gb_connection_disable(connection); -exit_release_minor: - release_minor(gb_tty); -exit_kfifo_free: - kfifo_free(&gb_tty->write_fifo); -exit_buf_free: - kfree(gb_tty->buffer); +exit_put_port: + tty_port_put(&gb_tty->port); exit_connection_destroy: gb_connection_destroy(connection); -exit_tty_free: - kfree(gb_tty); return retval; } @@ -958,15 +965,10 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) gb_connection_disable_rx(connection); tty_unregister_device(gb_tty_driver, gb_tty->minor); - /* FIXME - free transmit / receive buffers */ - gb_connection_disable(connection); - tty_port_destroy(&gb_tty->port); gb_connection_destroy(connection); - release_minor(gb_tty); - kfifo_free(&gb_tty->write_fifo); - kfree(gb_tty->buffer); - kfree(gb_tty); + + tty_port_put(&gb_tty->port); } static int gb_tty_init(void) From a6c7d3c2d127db0cc8d09b6272128ecc83ceb7fd Mon Sep 17 00:00:00 2001 From: Julian Sikorski Date: Mon, 13 Sep 2021 20:14:55 +0200 Subject: [PATCH 13/69] Re-enable UAS for LaCie Rugged USB3-FW with fk quirk commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream. Further testing has revealed that LaCie Rugged USB3-FW does work with uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled. Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/ Cc: stable Suggested-by: Hans de Goede Reviewed-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Julian Sikorski Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index c7db6c943ba5..2f72753c3e22 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -50,7 +50,7 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, "LaCie", "Rugged USB3-FW", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_IGNORE_UAS), + US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME), /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI From 20c9fdde30fbe797aec0e0a04fb77013fe473886 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:11:58 +0530 Subject: [PATCH 14/69] usb: core: hcd: Add support for deferring roothub registration commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 upstream. It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 31 ++++++++++++++++++++++++------- include/linux/usb/hcd.h | 2 ++ 2 files changed, 26 insertions(+), 7 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d0f45600b669..48ff9c66ae46 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2636,6 +2636,7 @@ int usb_add_hcd(struct usb_hcd *hcd, { int retval; struct usb_device *rhdev; + struct usb_hcd *shared_hcd; if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); @@ -2792,13 +2793,26 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_hcd_driver_start; } - /* starting here, usbcore will pay attention to this root hub */ - retval = register_root_hub(hcd); - if (retval != 0) - goto err_register_root_hub; + /* starting here, usbcore will pay attention to the shared HCD roothub */ + shared_hcd = hcd->shared_hcd; + if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) { + retval = register_root_hub(shared_hcd); + if (retval != 0) + goto err_register_root_hub; - if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) - usb_hcd_poll_rh_status(hcd); + if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd)) + usb_hcd_poll_rh_status(shared_hcd); + } + + /* starting here, usbcore will pay attention to this root hub */ + if (!HCD_DEFER_RH_REGISTER(hcd)) { + retval = register_root_hub(hcd); + if (retval != 0) + goto err_register_root_hub; + + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) + usb_hcd_poll_rh_status(hcd); + } return retval; @@ -2841,6 +2855,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); void usb_remove_hcd(struct usb_hcd *hcd) { struct usb_device *rhdev = hcd->self.root_hub; + bool rh_registered; dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); @@ -2851,6 +2866,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "roothub graceful disconnect\n"); spin_lock_irq (&hcd_root_hub_lock); + rh_registered = hcd->rh_registered; hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); @@ -2860,7 +2876,8 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->died_work); mutex_lock(&usb_bus_idr_lock); - usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + if (rh_registered) + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_idr_lock); /* diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 712b2a603645..c0eb85b2981e 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -124,6 +124,7 @@ struct usb_hcd { #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ +#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -134,6 +135,7 @@ struct usb_hcd { #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) +#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER)) /* * Specifies if interfaces are authorized by default From 5cc674a3f18e6430c98693342374399049dde522 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:18:47 +0200 Subject: [PATCH 15/69] USB: serial: mos7840: remove duplicated 0xac24 device ID commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream. 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2b8a0d4b66fc..84b6093ed1d2 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -114,7 +114,6 @@ #define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02 #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03 -#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 @@ -196,7 +195,6 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)}, From 59564b0183cb9bde1f17e598b180f9288f873fec Mon Sep 17 00:00:00 2001 From: Carlo Lobrano Date: Fri, 3 Sep 2021 14:39:13 +0200 Subject: [PATCH 16/69] USB: serial: option: add Telit LN920 compositions commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream. This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com Reviewed-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d42ca1356996..3e3a5ffc5a41 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1205,6 +1205,14 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */ + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff), /* Telit LN920 (RNDIS) */ + .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), From 4b2cf0faffce9f077ac49234a61c49db41cf0f7b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:18:48 +0200 Subject: [PATCH 17/69] USB: serial: option: remove duplicate USB device ID commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream. The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3e3a5ffc5a41..5965957e7663 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1658,7 +1658,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), From 406ff5bf727d1e089908d4f64d53f2a2e9d7506a Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Fri, 17 Sep 2021 19:01:06 +0800 Subject: [PATCH 18/69] USB: serial: option: add device id for Foxconn T99W265 commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream. Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5965957e7663..82016d978146 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2075,6 +2075,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ + .driver_info = RSVD(3) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ From 7751f609eadf36b1f53712bae430019c53a16eb0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 21:35:48 +0900 Subject: [PATCH 19/69] mcb: fix error handling in mcb_alloc_bus() commit 25a1433216489de4abc889910f744e952cb6dbae upstream. There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback") Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index b72e82efaee5..c799bb81ab03 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -277,8 +277,8 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL); if (bus_nr < 0) { - rc = bus_nr; - goto err_free; + kfree(bus); + return ERR_PTR(bus_nr); } bus->bus_nr = bus_nr; @@ -293,12 +293,12 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) dev_set_name(&bus->dev, "mcb:%d", bus_nr); rc = device_add(&bus->dev); if (rc) - goto err_free; + goto err_put; return bus; -err_free: - put_device(carrier); - kfree(bus); + +err_put: + put_device(&bus->dev); return ERR_PTR(rc); } EXPORT_SYMBOL_GPL(mcb_alloc_bus); From d4ec140e71585db72e83bbd6393a9ffc45b9565b Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Tue, 21 Sep 2021 22:35:30 +0800 Subject: [PATCH 20/69] erofs: fix up erofs_lookup tracepoint commit 93368aab0efc87288cac65e99c9ed2e0ffc9e7d0 upstream. Fix up a misuse that the filename pointer isn't always valid in the ring buffer, and we should copy the content instead. Link: https://lore.kernel.org/r/20210921143531.81356-1-hsiangkao@linux.alibaba.com Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint") Cc: stable@vger.kernel.org # 4.19+ Reviewed-by: Chao Yu Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman --- include/trace/events/erofs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/trace/events/erofs.h b/include/trace/events/erofs.h index 27f5caa6299a..ecfad7641096 100644 --- a/include/trace/events/erofs.h +++ b/include/trace/events/erofs.h @@ -35,20 +35,20 @@ TRACE_EVENT(erofs_lookup, TP_STRUCT__entry( __field(dev_t, dev ) __field(erofs_nid_t, nid ) - __field(const char *, name ) + __string(name, dentry->d_name.name ) __field(unsigned int, flags ) ), TP_fast_assign( __entry->dev = dir->i_sb->s_dev; __entry->nid = EROFS_I(dir)->nid; - __entry->name = dentry->d_name.name; + __assign_str(name, dentry->d_name.name); __entry->flags = flags; ), TP_printk("dev = (%d,%d), pnid = %llu, name:%s, flags:%x", show_dev_nid(__entry), - __entry->name, + __get_str(name), __entry->flags) ); From 381c8ce0abc018934bf8d47df1880089e36c52de Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 16 Sep 2021 20:43:29 +0800 Subject: [PATCH 21/69] btrfs: prevent __btrfs_dump_space_info() to underflow its free space commit 0619b7901473c380abc05d45cf9c70bee0707db3 upstream. It's not uncommon where __btrfs_dump_space_info() gets called under over-commit situations. In that case free space would underflow as total allocated space is not enough to handle all the over-committed space. Such underflow values can sometimes cause confusion for users enabled enospc_debug mount option, and takes some seconds for developers to convert the underflow value to signed result. Just output the free space as s64 to avoid such problem. Reported-by: Eli V Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/space-info.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c index 90500b6c41fc..1cd39f6a9c3a 100644 --- a/fs/btrfs/space-info.c +++ b/fs/btrfs/space-info.c @@ -262,9 +262,10 @@ static void __btrfs_dump_space_info(struct btrfs_fs_info *fs_info, { lockdep_assert_held(&info->lock); - btrfs_info(fs_info, "space_info %llu has %llu free, is %sfull", + /* The free space could be negative in case of overcommit */ + btrfs_info(fs_info, "space_info %llu has %lld free, is %sfull", info->flags, - info->total_bytes - btrfs_space_info_used(info, true), + (s64)(info->total_bytes - btrfs_space_info_used(info, true)), info->full ? "" : "not "); btrfs_info(fs_info, "space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu", From 2d7c20db7220bc8dbc560de6e58f024696c790e5 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:11:59 +0530 Subject: [PATCH 22/69] xhci: Set HCD flag to defer primary roothub registration commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream. Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 505da4999e20..02a2afd130eb 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -693,6 +693,7 @@ int xhci_run(struct usb_hcd *hcd) if (ret) xhci_free_command(xhci, command); } + set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); From 494260e20ac25cc281671ce3cf05b2bd1c66f8a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Sat, 11 Sep 2021 15:20:17 +0200 Subject: [PATCH 23/69] serial: mvebu-uart: fix driver's tx_empty callback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream. Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mvebu-uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 51b4d8d1dcac..13db15118cb9 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -164,7 +164,7 @@ static unsigned int mvebu_uart_tx_empty(struct uart_port *port) st = readl(port->membase + UART_STAT); spin_unlock_irqrestore(&port->lock, flags); - return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0; + return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0; } static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) From acce91ba0d9fcb07d38977ed3315d4e79e5d320c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 12:12:04 +0200 Subject: [PATCH 24/69] net: hso: fix muxed tty registration commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream. If resource allocation and registration fail for a muxed tty device (e.g. if there are no more minor numbers) the driver should not try to deregister the never-registered (or already-deregistered) tty. Fix up the error handling to avoid dereferencing a NULL pointer when attempting to remove the character device. Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/hso.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 22450c4a9225..9ad1f093c4ae 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2704,14 +2704,14 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) - goto exit; + goto err_free_dev; hso_dev->port_data.dev_serial = serial; serial->parent = hso_dev; if (hso_serial_common_create (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE)) - goto exit; + goto err_free_serial; serial->tx_data_length--; serial->write_data = hso_mux_serial_write_data; @@ -2727,11 +2727,9 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, /* done, return it */ return hso_dev; -exit: - if (serial) { - tty_unregister_device(tty_drv, serial->minor); - kfree(serial); - } +err_free_serial: + kfree(serial); +err_free_dev: kfree(hso_dev); return NULL; From a8e8b1481930e14cd424a3abe95f97df4c5570ae Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 18:11:33 +0100 Subject: [PATCH 25/69] afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation [ Upstream commit 63d49d843ef5fffeea069e0ffdfbd2bf40ba01c6 ] The AFS filesystem is currently triggering the silly-rename cleanup from afs_d_revalidate() when it sees that a dentry has been changed by a third party[1]. It should not be doing this as the cleanup includes deleting the silly-rename target file on iput. Fix this by removing the places in the d_revalidate handling that validate anything other than the directory and the dirent. It probably should not be looking to validate the target inode of the dentry also. This includes removing the point in afs_d_revalidate() where the inode that a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED). We don't know it got deleted. It could have been renamed or it could have hard links remaining. This was reproduced by cloning a git repo onto an afs volume on one machine, switching to another machine and doing "git status", then switching back to the first and doing "git status". The second status would show weird output due to ".git/index" getting deleted by the above mentioned mechanism. A simpler way to do it is to do: machine 1: touch a machine 2: touch b; mv -f b a machine 1: stat a on an afs volume. The bug shows up as the stat failing with ENOENT and the file server log showing that machine 1 deleted "a". Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename") Reported-by: Markus Suvanto Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1] Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/ Signed-off-by: Sasha Levin --- fs/afs/dir.c | 46 +++++++--------------------------------------- 1 file changed, 7 insertions(+), 39 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index e7494cd49ce7..8c39533d122a 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -977,9 +977,9 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry, */ static int afs_d_revalidate_rcu(struct dentry *dentry) { - struct afs_vnode *dvnode, *vnode; + struct afs_vnode *dvnode; struct dentry *parent; - struct inode *dir, *inode; + struct inode *dir; long dir_version, de_version; _enter("%p", dentry); @@ -1009,18 +1009,6 @@ static int afs_d_revalidate_rcu(struct dentry *dentry) return -ECHILD; } - /* Check to see if the vnode referred to by the dentry still - * has a callback. - */ - if (d_really_is_positive(dentry)) { - inode = d_inode_rcu(dentry); - if (inode) { - vnode = AFS_FS_I(inode); - if (!afs_check_validity(vnode)) - return -ECHILD; - } - } - return 1; /* Still valid */ } @@ -1056,17 +1044,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) if (IS_ERR(key)) key = NULL; - if (d_really_is_positive(dentry)) { - inode = d_inode(dentry); - if (inode) { - vnode = AFS_FS_I(inode); - afs_validate(vnode, key); - if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) - goto out_bad; - } - } - - /* lock down the parent dentry so we can peer at it */ + /* Hold the parent dentry so we can peer at it */ parent = dget_parent(dentry); dir = AFS_FS_I(d_inode(parent)); @@ -1075,7 +1053,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) if (test_bit(AFS_VNODE_DELETED, &dir->flags)) { _debug("%pd: parent dir deleted", dentry); - goto out_bad_parent; + goto not_found; } /* We only need to invalidate a dentry if the server's copy changed @@ -1101,12 +1079,12 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) case 0: /* the filename maps to something */ if (d_really_is_negative(dentry)) - goto out_bad_parent; + goto not_found; inode = d_inode(dentry); if (is_bad_inode(inode)) { printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n", dentry); - goto out_bad_parent; + goto not_found; } vnode = AFS_FS_I(inode); @@ -1128,9 +1106,6 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) dentry, fid.unique, vnode->fid.unique, vnode->vfs_inode.i_generation); - write_seqlock(&vnode->cb_lock); - set_bit(AFS_VNODE_DELETED, &vnode->flags); - write_sequnlock(&vnode->cb_lock); goto not_found; } goto out_valid; @@ -1145,7 +1120,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) default: _debug("failed to iterate dir %pd: %d", parent, ret); - goto out_bad_parent; + goto not_found; } out_valid: @@ -1156,16 +1131,9 @@ out_valid_noupdate: _leave(" = 1 [valid]"); return 1; - /* the dirent, if it exists, now points to a different vnode */ not_found: - spin_lock(&dentry->d_lock); - dentry->d_flags |= DCACHE_NFSFS_RENAMED; - spin_unlock(&dentry->d_lock); - -out_bad_parent: _debug("dropping dentry %pd2", dentry); dput(parent); -out_bad: key_put(key); _leave(" = 0 [bad]"); From cf9138c966ddbb1475fdb662989316f7d5fdd818 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 27 Aug 2021 17:53:10 +0300 Subject: [PATCH 26/69] platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR() [ Upstream commit 349bff48ae0f5f8aa2075d0bdc2091a30bd634f6 ] ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR() and unused acpi.h. Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver") Reported-by: kernel test robot Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin --- drivers/platform/x86/intel_punit_ipc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c index ccb44f2eb240..af3a28623e86 100644 --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -8,7 +8,6 @@ * which provide mailbox interface for power management usage. */ -#include #include #include #include @@ -335,7 +334,7 @@ static struct platform_driver intel_punit_ipc_driver = { .remove = intel_punit_ipc_remove, .driver = { .name = "intel_punit_ipc", - .acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids), + .acpi_match_table = punit_ipc_acpi_ids, }, }; From 4c4c3052911b577920353a7646e4883d5da40c28 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 17 Sep 2021 13:22:05 +0300 Subject: [PATCH 27/69] enetc: Fix illegal access when reading affinity_hint [ Upstream commit 7237a494decfa17d0b9d0076e6cee3235719de90 ] irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/freescale/enetc/enetc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index b77eaf31bd4e..cee77326e7e8 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1222,7 +1222,6 @@ static void enetc_clear_bdrs(struct enetc_ndev_priv *priv) static int enetc_setup_irqs(struct enetc_ndev_priv *priv) { struct pci_dev *pdev = priv->si->pdev; - cpumask_t cpu_mask; int i, j, err; for (i = 0; i < priv->bdr_int_num; i++) { @@ -1249,9 +1248,7 @@ static int enetc_setup_irqs(struct enetc_ndev_priv *priv) enetc_wr(hw, ENETC_SIMSITRV(idx), entry); } - cpumask_clear(&cpu_mask); - cpumask_set_cpu(i % num_online_cpus(), &cpu_mask); - irq_set_affinity_hint(irq, &cpu_mask); + irq_set_affinity_hint(irq, get_cpu_mask(i % num_online_cpus())); } return 0; From 363438ed5de0479dea926667a6abe6043eda3e66 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 20 Sep 2021 02:51:52 -0400 Subject: [PATCH 28/69] bnxt_en: Fix TX timeout when TX ring size is set to the smallest [ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ] The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 ++++---- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 +++++ drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index e67f07faca78..7f590a9e3af7 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -372,7 +372,7 @@ static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp, * netif_tx_queue_stopped(). */ smp_mb(); - if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) { + if (bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh) { netif_tx_wake_queue(txq); return false; } @@ -701,7 +701,7 @@ next_tx_int: smp_mb(); if (unlikely(netif_tx_queue_stopped(txq)) && - bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh && + bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh && READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING) netif_tx_wake_queue(txq); } @@ -2206,7 +2206,7 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) { tx_pkts++; /* return full budget so NAPI will complete. */ - if (unlikely(tx_pkts > bp->tx_wake_thresh)) { + if (unlikely(tx_pkts >= bp->tx_wake_thresh)) { rx_pkts = budget; raw_cons = NEXT_RAW_CMP(raw_cons); if (budget) @@ -3329,7 +3329,7 @@ static int bnxt_init_tx_rings(struct bnxt *bp) u16 i; bp->tx_wake_thresh = max_t(int, bp->tx_ring_size / 2, - MAX_SKB_FRAGS + 1); + BNXT_MIN_TX_DESC_CNT); for (i = 0; i < bp->tx_nr_rings; i++) { struct bnxt_tx_ring_info *txr = &bp->tx_ring[i]; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 510ff01bdad8..8ba369c0100b 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -601,6 +601,11 @@ struct nqe_cn { #define BNXT_MAX_RX_JUM_DESC_CNT (RX_DESC_CNT * MAX_RX_AGG_PAGES - 1) #define BNXT_MAX_TX_DESC_CNT (TX_DESC_CNT * MAX_TX_PAGES - 1) +/* Minimum TX BDs for a TX packet with MAX_SKB_FRAGS + 1. We need one extra + * BD because the first TX BD is always a long BD. + */ +#define BNXT_MIN_TX_DESC_CNT (MAX_SKB_FRAGS + 2) + #define RX_RING(x) (((x) & ~(RX_DESC_CNT - 1)) >> (BNXT_PAGE_SHIFT - 4)) #define RX_IDX(x) ((x) & (RX_DESC_CNT - 1)) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 211852378224..97aff84fd1d1 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -744,7 +744,7 @@ static int bnxt_set_ringparam(struct net_device *dev, if ((ering->rx_pending > BNXT_MAX_RX_DESC_CNT) || (ering->tx_pending > BNXT_MAX_TX_DESC_CNT) || - (ering->tx_pending <= MAX_SKB_FRAGS)) + (ering->tx_pending < BNXT_MIN_TX_DESC_CNT)) return -EINVAL; if (netif_running(dev)) From f7fb7dbdfb25091f38833bf76d330075e15fb31e Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Sep 2021 21:18:14 +0200 Subject: [PATCH 29/69] net/smc: add missing error check in smc_clc_prfx_set() [ Upstream commit 6c90731980655280ea07ce4b21eb97457bf86286 ] Coverity stumbled over a missing error check in smc_clc_prfx_set(): *** CID 1475954: Error handling issues (CHECKED_RETURN) /net/smc/smc_clc.c: 233 in smc_clc_prfx_set() >>> CID 1475954: Error handling issues (CHECKED_RETURN) >>> Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times). 233 kernel_getsockname(clcsock, (struct sockaddr *)&addrs); Add the return code check in smc_clc_prfx_set(). Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs") Reported-by: Julian Wiedmann Signed-off-by: Karsten Graul Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/smc/smc_clc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index aee9ccfa99c2..ade1232699bb 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -164,7 +164,8 @@ static int smc_clc_prfx_set(struct socket *clcsock, goto out_rel; } /* get address to which the internal TCP socket is bound */ - kernel_getsockname(clcsock, (struct sockaddr *)&addrs); + if (kernel_getsockname(clcsock, (struct sockaddr *)&addrs) < 0) + goto out_rel; /* analyze IP specific data of net_device belonging to TCP socket */ addr6 = (struct sockaddr_in6 *)&addrs; rcu_read_lock(); From 23716d7153fc0b8c8b594925a87816a3db6344da Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 16 Sep 2021 20:19:35 +0900 Subject: [PATCH 30/69] gpio: uniphier: Fix void functions to remove return value [ Upstream commit 2dd824cca3407bc9a2bd11b00f6e117b66fcfcf1 ] The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should be void. Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver") Signed-off-by: Kunihiko Hayashi Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin --- drivers/gpio/gpio-uniphier.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c index 93cdcc41e9fb..0f1cf50b4dce 100644 --- a/drivers/gpio/gpio-uniphier.c +++ b/drivers/gpio/gpio-uniphier.c @@ -188,7 +188,7 @@ static void uniphier_gpio_irq_mask(struct irq_data *data) uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0); - return irq_chip_mask_parent(data); + irq_chip_mask_parent(data); } static void uniphier_gpio_irq_unmask(struct irq_data *data) @@ -198,7 +198,7 @@ static void uniphier_gpio_irq_unmask(struct irq_data *data) uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask); - return irq_chip_unmask_parent(data); + irq_chip_unmask_parent(data); } static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type) From ae7b957ef0032bc0267aac9476dec7cfd00a9dde Mon Sep 17 00:00:00 2001 From: Shai Malin Date: Wed, 22 Sep 2021 13:53:26 +0300 Subject: [PATCH 31/69] qed: rdma - don't wait for resources under hw error recovery flow [ Upstream commit 1ea7812326004afd2803cc968a4776ae5120a597 ] If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Shai Malin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 8 ++++++++ drivers/net/ethernet/qlogic/qed/qed_roce.c | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c index 9adbaccd0c5e..934740d60470 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c @@ -1307,6 +1307,14 @@ qed_iwarp_wait_cid_map_cleared(struct qed_hwfn *p_hwfn, struct qed_bmap *bmap) prev_weight = weight; while (weight) { + /* If the HW device is during recovery, all resources are + * immediately reset without receiving a per-cid indication + * from HW. In this case we don't expect the cid_map to be + * cleared. + */ + if (p_hwfn->cdev->recov_in_prog) + return 0; + msleep(QED_IWARP_MAX_CID_CLEAN_TIME); weight = bitmap_weight(bmap->bitmap, bmap->max_count); diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c index 83817bb50e9f..6e6563b51d68 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_roce.c +++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c @@ -107,6 +107,14 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn) * Beyond the added delay we clear the bitmap anyway. */ while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) { + /* If the HW device is during recovery, all resources are + * immediately reset without receiving a per-cid indication + * from HW. In this case we don't expect the cid bitmap to be + * cleared. + */ + if (p_hwfn->cdev->recov_in_prog) + return; + msleep(100); if (wait_count++ > 20) { DP_NOTICE(p_hwfn, "cid bitmap wait timed out\n"); From d0f4a2eeebbe0cbdb0e493733f8578e334074cb4 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 23 Sep 2021 09:51:45 +0300 Subject: [PATCH 32/69] net/mlx4_en: Don't allow aRFS for encapsulated packets [ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ] Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index cd165e52ed33..d029179a4804 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -371,6 +371,9 @@ mlx4_en_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, int nhoff = skb_network_offset(skb); int ret = 0; + if (skb->encapsulation) + return -EPROTONOSUPPORT; + if (skb->protocol != htons(ETH_P_IP)) return -EPROTONOSUPPORT; From 1deb94d37a7e3972c610351206ffbdb8c62a8977 Mon Sep 17 00:00:00 2001 From: Baokun Li Date: Wed, 1 Sep 2021 16:53:36 +0800 Subject: [PATCH 33/69] scsi: iscsi: Adjust iface sysfs attr detection [ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ] ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan Signed-off-by: Baokun Li Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/scsi_transport_iscsi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 77bba91b5714..6f21cb75d95f 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -434,9 +434,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, struct iscsi_transport *t = iface->transport; int param = -1; - if (attr == &dev_attr_iface_enabled.attr) - param = ISCSI_NET_PARAM_IFACE_ENABLE; - else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) + if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO; else if (attr == &dev_attr_iface_header_digest.attr) param = ISCSI_IFACE_PARAM_HDRDGST_EN; @@ -476,7 +474,9 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, if (param != -1) return t->attr_is_visible(ISCSI_IFACE_PARAM, param); - if (attr == &dev_attr_iface_vlan_id.attr) + if (attr == &dev_attr_iface_enabled.attr) + param = ISCSI_NET_PARAM_IFACE_ENABLE; + else if (attr == &dev_attr_iface_vlan_id.attr) param = ISCSI_NET_PARAM_VLAN_ID; else if (attr == &dev_attr_iface_vlan_priority.attr) param = ISCSI_NET_PARAM_VLAN_PRIORITY; From c5f27aedf6bbe232237aeb6e6c37b8461544f04d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 2 Mar 2021 07:22:09 +0100 Subject: [PATCH 34/69] tty: synclink_gt, drop unneeded forward declarations [ Upstream commit b9b90fe655c0bd816847ac1bcbf179cfa2981ecb ] Forward declarations make the code larger and rewrites harder. Harder as they are often omitted from global changes. Remove forward declarations which are not really needed, i.e. the definition of the function is before its first use. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210302062214.29627-39-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/synclink_gt.c | 57 +-------------------------------------- 1 file changed, 1 insertion(+), 56 deletions(-) diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 36f1a4d870eb..4ef84ed54ea5 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -137,37 +137,14 @@ MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); */ static struct tty_driver *serial_driver; -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); static void tx_release(struct tty_struct *tty); -static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - /* - * generic HDLC support and callbacks + * generic HDLC support */ -#if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(struct slgt_info *info); -static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); -static int hdlcdev_init(struct slgt_info *info); -static void hdlcdev_exit(struct slgt_info *info); -#endif /* @@ -186,9 +163,6 @@ struct cond_wait { wait_queue_entry_t wait; unsigned int data; }; -static void init_cond_wait(struct cond_wait *w, unsigned int data); -static void add_cond_wait(struct cond_wait **head, struct cond_wait *w); -static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w); static void flush_cond_wait(struct cond_wait **head); /* @@ -443,12 +417,8 @@ static void shutdown(struct slgt_info *info); static void program_hw(struct slgt_info *info); static void change_params(struct slgt_info *info); -static int register_test(struct slgt_info *info); -static int irq_test(struct slgt_info *info); -static int loopback_test(struct slgt_info *info); static int adapter_test(struct slgt_info *info); -static void reset_adapter(struct slgt_info *info); static void reset_port(struct slgt_info *info); static void async_mode(struct slgt_info *info); static void sync_mode(struct slgt_info *info); @@ -457,14 +427,12 @@ static void rx_stop(struct slgt_info *info); static void rx_start(struct slgt_info *info); static void reset_rbufs(struct slgt_info *info); static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); -static void rdma_reset(struct slgt_info *info); static bool rx_get_frame(struct slgt_info *info); static bool rx_get_buf(struct slgt_info *info); static void tx_start(struct slgt_info *info); static void tx_stop(struct slgt_info *info); static void tx_set_idle(struct slgt_info *info); -static unsigned int free_tbuf_count(struct slgt_info *info); static unsigned int tbuf_bytes(struct slgt_info *info); static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); @@ -472,26 +440,10 @@ static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count) static void get_signals(struct slgt_info *info); static void set_signals(struct slgt_info *info); -static void enable_loopback(struct slgt_info *info); static void set_rate(struct slgt_info *info, u32 data_rate); -static int bh_action(struct slgt_info *info); -static void bh_handler(struct work_struct *work); static void bh_transmit(struct slgt_info *info); -static void isr_serial(struct slgt_info *info); -static void isr_rdma(struct slgt_info *info); static void isr_txeom(struct slgt_info *info, unsigned short status); -static void isr_tdma(struct slgt_info *info); - -static int alloc_dma_bufs(struct slgt_info *info); -static void free_dma_bufs(struct slgt_info *info); -static int alloc_desc(struct slgt_info *info); -static void free_desc(struct slgt_info *info); -static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); -static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); - -static int alloc_tmp_rbuf(struct slgt_info *info); -static void free_tmp_rbuf(struct slgt_info *info); static void tx_timeout(struct timer_list *t); static void rx_timeout(struct timer_list *t); @@ -509,10 +461,6 @@ static int tx_abort(struct slgt_info *info); static int rx_enable(struct slgt_info *info, int enable); static int modem_input_wait(struct slgt_info *info,int arg); static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); static int get_interface(struct slgt_info *info, int __user *if_mode); static int set_interface(struct slgt_info *info, int if_mode); static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); @@ -526,9 +474,6 @@ static int set_xctrl(struct slgt_info *info, int if_mode); /* * driver functions */ -static void add_device(struct slgt_info *info); -static void device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(struct slgt_info *info); static void release_resources(struct slgt_info *info); /* From 5bcead7cde68cc58212018e376b1cef2ab2d2ee2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 Sep 2021 17:38:06 -0700 Subject: [PATCH 35/69] tty: synclink_gt: rename a conflicting function name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 06e49073dfba24df4b1073a068631b13a0039c34 ] 'set_signals()' in synclink_gt.c conflicts with an exported symbol in arch/um/, so change set_signals() to set_gtsignals(). Keep the function names similar by also changing get_signals() to get_gtsignals(). ../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’ static void set_signals(struct slgt_info *info); ^~~~~~~~~~~ In file included from ../include/linux/irqflags.h:16:0, from ../include/linux/spinlock.h:58, from ../include/linux/mm_types.h:9, from ../include/linux/buildid.h:5, from ../include/linux/module.h:14, from ../drivers/tty/synclink_gt.c:46: ../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here int set_signals(int enable); ^~~~~~~~~~~ Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt") Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Paul Fulghum Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/synclink_gt.c | 44 +++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 4ef84ed54ea5..ff345a8e0fcc 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -438,8 +438,8 @@ static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); -static void get_signals(struct slgt_info *info); -static void set_signals(struct slgt_info *info); +static void get_gtsignals(struct slgt_info *info); +static void set_gtsignals(struct slgt_info *info); static void set_rate(struct slgt_info *info, u32 data_rate); static void bh_transmit(struct slgt_info *info); @@ -721,7 +721,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -731,7 +731,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) if (!C_CRTSCTS(tty) || !tty_throttled(tty)) info->signals |= SerialSignal_RTS; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -1182,7 +1182,7 @@ static inline void line_info(struct seq_file *m, struct slgt_info *info) /* output current serial signal states */ spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); stat_buf[0] = 0; @@ -1282,7 +1282,7 @@ static void throttle(struct tty_struct * tty) if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1307,7 +1307,7 @@ static void unthrottle(struct tty_struct * tty) if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1479,7 +1479,7 @@ static int hdlcdev_open(struct net_device *dev) /* inform generic HDLC layer of current DCD status */ spin_lock_irqsave(&info->lock, flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock, flags); if (info->signals & SerialSignal_DCD) netif_carrier_on(dev); @@ -2235,7 +2235,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status) if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { info->signals &= ~SerialSignal_RTS; info->drop_rts_on_tx_done = false; - set_signals(info); + set_gtsignals(info); } #if SYNCLINK_GENERIC_HDLC @@ -2400,7 +2400,7 @@ static void shutdown(struct slgt_info *info) if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); } flush_cond_wait(&info->gpio_wait_q); @@ -2428,7 +2428,7 @@ static void program_hw(struct slgt_info *info) else async_mode(info); - set_signals(info); + set_gtsignals(info); info->dcd_chkcount = 0; info->cts_chkcount = 0; @@ -2436,7 +2436,7 @@ static void program_hw(struct slgt_info *info) info->dsr_chkcount = 0; slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); - get_signals(info); + get_gtsignals(info); if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) @@ -2680,7 +2680,7 @@ static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) spin_lock_irqsave(&info->lock,flags); /* return immediately if state matches requested events */ - get_signals(info); + get_gtsignals(info); s = info->signals; events = mask & @@ -3098,7 +3098,7 @@ static int tiocmget(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + @@ -3137,7 +3137,7 @@ static int tiocmset(struct tty_struct *tty, info->signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; } @@ -3148,7 +3148,7 @@ static int carrier_raised(struct tty_port *port) struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->signals & SerialSignal_DCD) ? 1 : 0; } @@ -3163,7 +3163,7 @@ static void dtr_rts(struct tty_port *port, int on) info->signals |= SerialSignal_RTS | SerialSignal_DTR; else info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3962,10 +3962,10 @@ static void tx_start(struct slgt_info *info) if (info->params.mode != MGSL_MODE_ASYNC) { if (info->params.flags & HDLC_FLAG_AUTO_RTS) { - get_signals(info); + get_gtsignals(info); if (!(info->signals & SerialSignal_RTS)) { info->signals |= SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); info->drop_rts_on_tx_done = true; } } @@ -4019,7 +4019,7 @@ static void reset_port(struct slgt_info *info) rx_stop(info); info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); } @@ -4441,7 +4441,7 @@ static void tx_set_idle(struct slgt_info *info) /* * get state of V24 status (input) signals */ -static void get_signals(struct slgt_info *info) +static void get_gtsignals(struct slgt_info *info) { unsigned short status = rd_reg16(info, SSR); @@ -4503,7 +4503,7 @@ static void msc_set_vcr(struct slgt_info *info) /* * set state of V24 control (output) signals */ -static void set_signals(struct slgt_info *info) +static void set_gtsignals(struct slgt_info *info) { unsigned char val = rd_reg8(info, VCR); if (info->signals & SerialSignal_DTR) From 0ebc3e688f54a71d680ae436ed6879ebbba4f437 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Tue, 10 Aug 2021 09:40:36 -0700 Subject: [PATCH 36/69] fpga: machxo2-spi: Return an error on failure [ Upstream commit 34331739e19fd6a293d488add28832ad49c9fc54 ] Earlier successes leave 'ret' in a non error state, so these errors are not reported. Set ret to -EINVAL before going to the error handler. This addresses two issues reported by smatch: drivers/fpga/machxo2-spi.c:229 machxo2_write_init() warn: missing error code 'ret' drivers/fpga/machxo2-spi.c:316 machxo2_write_complete() warn: missing error code 'ret' [mdf@kernel.org: Reworded commit message] Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support") Reported-by: Dan Carpenter Signed-off-by: Tom Rix Signed-off-by: Moritz Fischer Signed-off-by: Sasha Levin --- drivers/fpga/machxo2-spi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c index 4d8a87641587..2fd097c3994b 100644 --- a/drivers/fpga/machxo2-spi.c +++ b/drivers/fpga/machxo2-spi.c @@ -223,8 +223,10 @@ static int machxo2_write_init(struct fpga_manager *mgr, goto fail; get_status(spi, &status); - if (test_bit(FAIL, &status)) + if (test_bit(FAIL, &status)) { + ret = -EINVAL; goto fail; + } dump_status_reg(&status); spi_message_init(&msg); @@ -310,6 +312,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr, dump_status_reg(&status); if (!test_bit(DONE, &status)) { machxo2_cleanup(mgr); + ret = -EINVAL; goto fail; } From b869901caba41b4b4529d274ab2077cc87d13cbf Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Fri, 13 Aug 2021 14:40:42 +0800 Subject: [PATCH 37/69] fpga: machxo2-spi: Fix missing error code in machxo2_write_complete() [ Upstream commit a1e4470823d99e75b596748086e120dea169ed3c ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'ret'. Eliminate the follow smatch warning: drivers/fpga/machxo2-spi.c:341 machxo2_write_complete() warn: missing error code 'ret'. [mdf@kernel.org: Reworded commit message] Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support") Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Moritz Fischer Signed-off-by: Sasha Levin --- drivers/fpga/machxo2-spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c index 2fd097c3994b..37e54e375528 100644 --- a/drivers/fpga/machxo2-spi.c +++ b/drivers/fpga/machxo2-spi.c @@ -334,6 +334,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr, break; if (++refreshloop == MACHXO2_MAX_REFRESH_LOOP) { machxo2_cleanup(mgr); + ret = -EINVAL; goto fail; } } while (1); From 1c1062c5cf215c960373c75acb96dc601714ed88 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:13:42 +0300 Subject: [PATCH 38/69] thermal/core: Potential buffer overflow in thermal_build_list_of_policies() [ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ] After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210916131342.GB25094@kili Signed-off-by: Sasha Levin --- drivers/thermal/thermal_core.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index f526ce31f5a2..20eab56b02cb 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -228,15 +228,14 @@ int thermal_build_list_of_policies(char *buf) { struct thermal_governor *pos; ssize_t count = 0; - ssize_t size = PAGE_SIZE; mutex_lock(&thermal_governor_lock); list_for_each_entry(pos, &thermal_governor_list, governor_list) { - size = PAGE_SIZE - count; - count += scnprintf(buf + count, size, "%s ", pos->name); + count += scnprintf(buf + count, PAGE_SIZE - count, "%s ", + pos->name); } - count += scnprintf(buf + count, size, "\n"); + count += scnprintf(buf + count, PAGE_SIZE - count, "\n"); mutex_unlock(&thermal_governor_lock); From d140ccb140c2b082bd2fd61a0b444bcb4d2e6b43 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Sep 2021 23:33:35 +0300 Subject: [PATCH 39/69] cifs: fix a sign extension bug [ Upstream commit e946d3c887a9dc33aa82a349c6284f4a084163f4 ] The problem is the mismatched types between "ctx->total_len" which is an unsigned int, "rc" which is an int, and "ctx->rc" which is a ssize_t. The code does: ctx->rc = (rc == 0) ? ctx->total_len : rc; We want "ctx->rc" to store the negative "rc" error code. But what happens is that "rc" is type promoted to a high unsigned int and 'ctx->rc" will store the high positive value instead of a negative value. The fix is to change "rc" from an int to a ssize_t. Fixes: c610c4b619e5 ("CIFS: Add asynchronous write support through kernel AIO") Signed-off-by: Dan Carpenter Signed-off-by: Steve French Signed-off-by: Sasha Levin --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 1aac8d38f887..a9746af5a44d 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -2989,7 +2989,7 @@ static void collect_uncached_write_data(struct cifs_aio_ctx *ctx) struct cifs_tcon *tcon; struct cifs_sb_info *cifs_sb; struct dentry *dentry = ctx->cfile->dentry; - int rc; + ssize_t rc; tcon = tlink_tcon(ctx->cfile->tlink); cifs_sb = CIFS_SB(dentry->d_sb); From 30d373dc350125bd9aaff0c2719ba162bd63b936 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Wed, 15 Sep 2021 18:32:39 +0300 Subject: [PATCH 40/69] scsi: qla2xxx: Restore initiator in dual mode [ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ] In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/qla2xxx/qla_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 643b8ae36cbe..5dae7ac0d3ef 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -6803,7 +6803,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) return 0; break; case QLA2XXX_INI_MODE_DUAL: - if (!qla_dual_mode_enabled(vha)) + if (!qla_dual_mode_enabled(vha) && + !qla_ini_mode_enabled(vha)) return 0; break; case QLA2XXX_INI_MODE_ENABLED: From 1b59625da697fd2eba78d00755efcb60b070a593 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:23:31 +0300 Subject: [PATCH 41/69] scsi: lpfc: Use correct scnprintf() limit [ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ] The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not going to hit the limit so this fix will not affect runtime. Link: https://lore.kernel.org/r/20210916132331.GE25094@kili Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources") Reviewed-by: James Smart Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/lpfc/lpfc_attr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 45db19e31b34..f0ecfe565660 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -5881,7 +5881,8 @@ lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr, len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n", phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt); - len += scnprintf(buf + len, PAGE_SIZE, "Cfg: %d SCSI: %d NVME: %d\n", + len += scnprintf(buf + len, PAGE_SIZE - len, + "Cfg: %d SCSI: %d NVME: %d\n", phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt, phba->cfg_nvme_seg_cnt); return len; From 71f323f6059218b7ab14bbe43b8f155033c176ce Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Sep 2021 09:25:19 -0700 Subject: [PATCH 42/69] irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build [ Upstream commit 969ac78db78c723a24e9410666b457cc1b0cb3c3 ] irq-goldfish-pic uses GENERIC_IRQ_CHIP interfaces so select that symbol to fix build errors. Fixes these build errors: mips-linux-ld: drivers/irqchip/irq-goldfish-pic.o: in function `goldfish_pic_of_init': irq-goldfish-pic.c:(.init.text+0xc0): undefined reference to `irq_alloc_generic_chip' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf4): undefined reference to `irq_gc_unmask_enable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf8): undefined reference to `irq_gc_unmask_enable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x100): undefined reference to `irq_gc_mask_disable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x104): undefined reference to `irq_gc_mask_disable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x11c): undefined reference to `irq_setup_generic_chip' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x168): undefined reference to `irq_remove_generic_chip' Fixes: 4235ff50cf98 ("irqchip/irq-goldfish-pic: Add Goldfish PIC driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Miodrag Dinic Cc: Geert Uytterhoeven Cc: Bartosz Golaszewski Cc: Thomas Gleixner Cc: Marc Zyngier Cc: Goran Ferenc Cc: Aleksandar Markovic Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210905162519.21507-1-rdunlap@infradead.org Signed-off-by: Sasha Levin --- drivers/irqchip/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 97f9c001d8ff..20f44ef9c4c9 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -415,6 +415,7 @@ config MESON_IRQ_GPIO config GOLDFISH_PIC bool "Goldfish programmable interrupt controller" depends on MIPS && (GOLDFISH || COMPILE_TEST) + select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Say yes here to enable Goldfish interrupt controller driver used From 42d3711c23781045e7a5cd28536c774b9a66d20b Mon Sep 17 00:00:00 2001 From: Kaige Fu Date: Wed, 15 Sep 2021 10:20:55 +0800 Subject: [PATCH 43/69] irqchip/gic-v3-its: Fix potential VPE leak on error [ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ] In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Kaige Fu [maz: fixed commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com Signed-off-by: Sasha Levin --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index f298313b87ac..398c54387988 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -3123,7 +3123,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq if (err) { if (i > 0) - its_vpe_irq_domain_free(domain, virq, i - 1); + its_vpe_irq_domain_free(domain, virq, i); its_lpi_free(bitmap, base, nr_ids); its_free_prop_table(vprop_page); From 2b5befcd404522caae0df7e085b699122f5196a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 1 Sep 2021 13:38:29 +0200 Subject: [PATCH 44/69] md: fix a lock order reversal in md_alloc [ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ] Commit b0140891a8cea3 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891a8ce ("md: Fix race when creating a new md device.") Fixes: d62633873590 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Reviewed-by: NeilBrown Signed-off-by: Song Liu Signed-off-by: Sasha Levin --- drivers/md/md.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 761d43829b2b..c178b2f406de 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5535,10 +5535,6 @@ static int md_alloc(dev_t dev, char *name) */ disk->flags |= GENHD_FL_EXT_DEVT; mddev->gendisk = disk; - /* As soon as we call add_disk(), another thread could get - * through to md_open, so make sure it doesn't get too far - */ - mutex_lock(&mddev->open_mutex); add_disk(disk); error = kobject_add(&mddev->kobj, &disk_to_dev(disk)->kobj, "%s", "md"); @@ -5553,7 +5549,6 @@ static int md_alloc(dev_t dev, char *name) if (mddev->kobj.sd && sysfs_create_group(&mddev->kobj, &md_bitmap_group)) pr_debug("pointless warning\n"); - mutex_unlock(&mddev->open_mutex); abort: mutex_unlock(&disks_mutex); if (!error && mddev->kobj.sd) { From ebb8d26d93c3ec3c7576c52a8373a2309423c069 Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Thu, 23 Sep 2021 21:49:21 +0800 Subject: [PATCH 45/69] blktrace: Fix uaf in blk_trace access after removing by sysfs [ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ] There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- kernel/trace/blktrace.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 884333b9fc76..749b27851f45 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1656,6 +1656,14 @@ static int blk_trace_remove_queue(struct request_queue *q) if (bt == NULL) return -EINVAL; + if (bt->trace_state == Blktrace_running) { + bt->trace_state = Blktrace_stopped; + spin_lock_irq(&running_trace_lock); + list_del_init(&bt->running_list); + spin_unlock_irq(&running_trace_lock); + relay_flush(bt->rchan); + } + put_probe_ref(); synchronize_rcu(); blk_trace_free(bt); From 1da750d1e2140ef43d64d17f301ff6f41b45541e Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Wed, 8 Sep 2021 12:02:32 -0700 Subject: [PATCH 46/69] net: macb: fix use after free on rmmod [ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ] plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by: Nicolas Ferre Signed-off-by: Tong Zhang Acked-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/cadence/macb_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/macb_pci.c b/drivers/net/ethernet/cadence/macb_pci.c index 617b3b728dd0..94f3babfad30 100644 --- a/drivers/net/ethernet/cadence/macb_pci.c +++ b/drivers/net/ethernet/cadence/macb_pci.c @@ -112,9 +112,9 @@ static void macb_remove(struct pci_dev *pdev) struct platform_device *plat_dev = pci_get_drvdata(pdev); struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev); - platform_device_unregister(plat_dev); clk_unregister(plat_data->pclk); clk_unregister(plat_data->hclk); + platform_device_unregister(plat_dev); } static const struct pci_device_id dev_id_table[] = { From 29c70b0d335a2f5d1a8a2e7dad2b50f80d71b8aa Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Fri, 10 Sep 2021 21:55:34 +0200 Subject: [PATCH 47/69] net: stmmac: allow CSR clock of 300MHz [ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ] The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by: Jesper Nilsson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 4e7cfd3bfcd2..e09851c7da9b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -225,7 +225,7 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) priv->clk_csr = STMMAC_CSR_100_150M; else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M)) priv->clk_csr = STMMAC_CSR_150_250M; - else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M)) + else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M)) priv->clk_csr = STMMAC_CSR_250_300M; } From 7432ecc55fe956e896aff1c62dea981949d1bcff Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 6 Sep 2021 23:07:29 -0700 Subject: [PATCH 48/69] m68k: Double cast io functions to unsigned long [ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ] m68k builds fail widely with errors such as arch/m68k/include/asm/raw_io.h:20:19: error: cast to pointer from integer of different size arch/m68k/include/asm/raw_io.h:30:32: error: cast to pointer from integer of different size [-Werror=int-to-p On m68k, io functions are defined as macros. The problem is seen if the macro parameter variable size differs from the size of a pointer. Cast the parameter of all io macros to unsigned long before casting it to a pointer to fix the problem. Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin --- arch/m68k/include/asm/raw_io.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h index 8a6dc6e5a279..8ab3c350bd53 100644 --- a/arch/m68k/include/asm/raw_io.h +++ b/arch/m68k/include/asm/raw_io.h @@ -17,21 +17,21 @@ * two accesses to memory, which may be undesirable for some devices. */ #define in_8(addr) \ - ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; }) + ({ u8 __v = (*(__force volatile u8 *) (unsigned long)(addr)); __v; }) #define in_be16(addr) \ - ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; }) + ({ u16 __v = (*(__force volatile u16 *) (unsigned long)(addr)); __v; }) #define in_be32(addr) \ - ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; }) + ({ u32 __v = (*(__force volatile u32 *) (unsigned long)(addr)); __v; }) #define in_le16(addr) \ - ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; }) + ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (unsigned long)(addr)); __v; }) #define in_le32(addr) \ - ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; }) + ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (unsigned long)(addr)); __v; }) -#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b)) -#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w)) -#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l)) -#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w)) -#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l)) +#define out_8(addr,b) (void)((*(__force volatile u8 *) (unsigned long)(addr)) = (b)) +#define out_be16(addr,w) (void)((*(__force volatile u16 *) (unsigned long)(addr)) = (w)) +#define out_be32(addr,l) (void)((*(__force volatile u32 *) (unsigned long)(addr)) = (l)) +#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (unsigned long)(addr)) = cpu_to_le16(w)) +#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (unsigned long)(addr)) = cpu_to_le32(l)) #define raw_inb in_8 #define raw_inw in_be16 From 7273cb182f13b0ebd2e120a268cde6ea9dc45c28 Mon Sep 17 00:00:00 2001 From: zhang kai Date: Thu, 9 Sep 2021 16:39:18 +0800 Subject: [PATCH 49/69] ipv6: delay fib6_sernum increase in fib6_add [ Upstream commit e87b5052271e39d62337ade531992b7e5d8c2cfa ] only increase fib6_sernum in net namespace after add fib6_info successfully. Signed-off-by: zhang kai Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv6/ip6_fib.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index bb68290ad68d..9a6f66e0e9a2 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -1310,7 +1310,6 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt, int err = -ENOMEM; int allow_create = 1; int replace_required = 0; - int sernum = fib6_new_sernum(info->nl_net); if (info->nlh) { if (!(info->nlh->nlmsg_flags & NLM_F_CREATE)) @@ -1410,7 +1409,7 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt, if (!err) { if (rt->nh) list_add(&rt->nh_list, &rt->nh->f6i_list); - __fib6_update_sernum_upto_root(rt, sernum); + __fib6_update_sernum_upto_root(rt, fib6_new_sernum(info->nl_net)); fib6_start_gc(info->nl_net, rt); } From 93937596e0652d50973f9dc944fea1694ac8cdfd Mon Sep 17 00:00:00 2001 From: Bixuan Cui Date: Sat, 11 Sep 2021 08:55:57 +0800 Subject: [PATCH 50/69] bpf: Add oversize check before call kvcalloc() [ Upstream commit 0e6491b559704da720f6da09dd0a52c4df44c514 ] Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the oversize check. When the allocation is larger than what kmalloc() supports, the following warning triggered: WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597 Modules linked in: CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597 Call Trace: kvmalloc include/linux/mm.h:806 [inline] kvmalloc_array include/linux/mm.h:824 [inline] kvcalloc include/linux/mm.h:829 [inline] check_btf_line kernel/bpf/verifier.c:9925 [inline] check_btf_info kernel/bpf/verifier.c:10049 [inline] bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759 bpf_prog_load kernel/bpf/syscall.c:2301 [inline] __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com Signed-off-by: Bixuan Cui Signed-off-by: Alexei Starovoitov Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com Signed-off-by: Sasha Levin --- kernel/bpf/verifier.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 60383b28549b..9c5fa5c52903 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -6839,6 +6839,8 @@ static int check_btf_line(struct bpf_verifier_env *env, nr_linfo = attr->line_info_cnt; if (!nr_linfo) return 0; + if (nr_linfo > INT_MAX / sizeof(struct bpf_line_info)) + return -EINVAL; rec_size = attr->line_info_rec_size; if (rec_size < MIN_BPF_LINEINFO_SIZE || From 29917bbb07c30be295dece245c7c21872e1a6fbb Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 27 Aug 2021 14:32:06 +0200 Subject: [PATCH 51/69] xen/balloon: use a kernel thread instead a workqueue [ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ] Today the Xen ballooning is done via delayed work in a workqueue. This might result in workqueue hangups being reported in case of large amounts of memory are being ballooned in one go (here 16GB): BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s! Showing busy workqueues and worker pools: workqueue events: flags=0x0 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3 in-flight: 229:balloon_process pending: cache_reap workqueue events_freezable_power_: flags=0x84 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: disk_events_workfn workqueue mm_percpu_wq: flags=0x8 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: vmstat_update pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43 This can easily be avoided by using a dedicated kernel thread for doing the ballooning work. Reported-by: Jan Beulich Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin --- drivers/xen/balloon.c | 62 +++++++++++++++++++++++++++++++------------ 1 file changed, 45 insertions(+), 17 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index ebb05517b6aa..2762d246991b 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include #include #include @@ -117,7 +119,7 @@ static struct ctl_table xen_root[] = { #define EXTENT_ORDER (fls(XEN_PFN_PER_PAGE) - 1) /* - * balloon_process() state: + * balloon_thread() state: * * BP_DONE: done or nothing to do, * BP_WAIT: wait to be rescheduled, @@ -132,6 +134,8 @@ enum bp_state { BP_ECANCELED }; +/* Main waiting point for xen-balloon thread. */ +static DECLARE_WAIT_QUEUE_HEAD(balloon_thread_wq); static DEFINE_MUTEX(balloon_mutex); @@ -146,10 +150,6 @@ static xen_pfn_t frame_list[PAGE_SIZE / sizeof(xen_pfn_t)]; static LIST_HEAD(ballooned_pages); static DECLARE_WAIT_QUEUE_HEAD(balloon_wq); -/* Main work function, always executed in process context. */ -static void balloon_process(struct work_struct *work); -static DECLARE_DELAYED_WORK(balloon_worker, balloon_process); - /* When ballooning out (allocating memory to return to Xen) we don't really want the kernel to try too hard since that can trigger the oom killer. */ #define GFP_BALLOON \ @@ -383,7 +383,7 @@ static void xen_online_page(struct page *page, unsigned int order) static int xen_memory_notifier(struct notifier_block *nb, unsigned long val, void *v) { if (val == MEM_ONLINE) - schedule_delayed_work(&balloon_worker, 0); + wake_up(&balloon_thread_wq); return NOTIFY_OK; } @@ -508,18 +508,43 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp) } /* - * As this is a work item it is guaranteed to run as a single instance only. + * Stop waiting if either state is not BP_EAGAIN and ballooning action is + * needed, or if the credit has changed while state is BP_EAGAIN. + */ +static bool balloon_thread_cond(enum bp_state state, long credit) +{ + if (state != BP_EAGAIN) + credit = 0; + + return current_credit() != credit || kthread_should_stop(); +} + +/* + * As this is a kthread it is guaranteed to run as a single instance only. * We may of course race updates of the target counts (which are protected * by the balloon lock), or with changes to the Xen hard limit, but we will * recover from these in time. */ -static void balloon_process(struct work_struct *work) +static int balloon_thread(void *unused) { enum bp_state state = BP_DONE; long credit; + unsigned long timeout; + set_freezable(); + for (;;) { + if (state == BP_EAGAIN) + timeout = balloon_stats.schedule_delay * HZ; + else + timeout = 3600 * HZ; + credit = current_credit(); + + wait_event_interruptible_timeout(balloon_thread_wq, + balloon_thread_cond(state, credit), timeout); + + if (kthread_should_stop()) + return 0; - do { mutex_lock(&balloon_mutex); credit = current_credit(); @@ -546,12 +571,7 @@ static void balloon_process(struct work_struct *work) mutex_unlock(&balloon_mutex); cond_resched(); - - } while (credit && state == BP_DONE); - - /* Schedule more work if there is some still to be done. */ - if (state == BP_EAGAIN) - schedule_delayed_work(&balloon_worker, balloon_stats.schedule_delay * HZ); + } } /* Resets the Xen limit, sets new target, and kicks off processing. */ @@ -559,7 +579,7 @@ void balloon_set_new_target(unsigned long target) { /* No need for lock. Not read-modify-write updates. */ balloon_stats.target_pages = target; - schedule_delayed_work(&balloon_worker, 0); + wake_up(&balloon_thread_wq); } EXPORT_SYMBOL_GPL(balloon_set_new_target); @@ -664,7 +684,7 @@ void free_xenballooned_pages(int nr_pages, struct page **pages) /* The balloon may be too large now. Shrink it if needed. */ if (current_credit()) - schedule_delayed_work(&balloon_worker, 0); + wake_up(&balloon_thread_wq); mutex_unlock(&balloon_mutex); } @@ -696,6 +716,8 @@ static void __init balloon_add_region(unsigned long start_pfn, static int __init balloon_init(void) { + struct task_struct *task; + if (!xen_domain()) return -ENODEV; @@ -739,6 +761,12 @@ static int __init balloon_init(void) } #endif + task = kthread_run(balloon_thread, NULL, "xen-balloon"); + if (IS_ERR(task)) { + pr_err("xen-balloon thread could not be started, ballooning will not work!\n"); + return PTR_ERR(task); + } + /* Init the xen-balloon driver. */ xen_balloon_init(); From ec49f3f7f6694de1cd0f6dca7e5ba18dd7699b72 Mon Sep 17 00:00:00 2001 From: Anton Eidelman Date: Sun, 12 Sep 2021 12:54:57 -0600 Subject: [PATCH 52/69] nvme-multipath: fix ANA state updates when a namespace is not present [ Upstream commit 79f528afa93918519574773ea49a444c104bc1bd ] nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by: Anton Eidelman Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/multipath.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 590b040e90a3..016a67fd4198 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -522,14 +522,17 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl, down_read(&ctrl->namespaces_rwsem); list_for_each_entry(ns, &ctrl->namespaces, list) { - unsigned nsid = le32_to_cpu(desc->nsids[n]); - + unsigned nsid; +again: + nsid = le32_to_cpu(desc->nsids[n]); if (ns->head->ns_id < nsid) continue; if (ns->head->ns_id == nsid) nvme_update_ns_ana_state(desc, ns); if (++n == nr_nsids) break; + if (ns->head->ns_id > nsid) + goto again; } up_read(&ctrl->namespaces_rwsem); return 0; From 9d7798823264e8fb92fb21707946ab643a764461 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 8 Sep 2021 09:48:22 +0200 Subject: [PATCH 53/69] sparc32: page align size in arch_dma_alloc [ Upstream commit 59583f747664046aaae5588d56d5954fab66cce8 ] Commit 53b7670e5735 ("sparc: factor the dma coherent mapping into helper") lost the page align for the calls to dma_make_coherent and srmmu_unmapiorange. The latter cannot handle a non page aligned len argument. Signed-off-by: Andreas Larsson Reviewed-by: Sam Ravnborg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin --- arch/sparc/kernel/ioport.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index f89603855f1e..b87e0002131d 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -356,7 +356,9 @@ err_nomem: void arch_dma_free(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr, unsigned long attrs) { - if (!sparc_dma_free_resource(cpu_addr, PAGE_ALIGN(size))) + size = PAGE_ALIGN(size); + + if (!sparc_dma_free_resource(cpu_addr, size)) return; dma_make_coherent(dma_addr, size); From d12ddd843f1877de1f7dd2aeea4907cf9ff3ac08 Mon Sep 17 00:00:00 2001 From: Li Jinlin Date: Tue, 14 Sep 2021 12:26:05 +0800 Subject: [PATCH 54/69] blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd [ Upstream commit 858560b27645e7e97aca37ee8f232cccd658fbd2 ] KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by grabbing the matching blkcg lock before trying to destroy blkg policy data. Suggested-by: Tejun Heo Signed-off-by: Li Jinlin Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- block/blk-cgroup.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index cb3d44d20005..dde8d0acfb34 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -1462,10 +1462,14 @@ enomem: /* alloc failed, nothing's initialized yet, free everything */ spin_lock_irq(&q->queue_lock); list_for_each_entry(blkg, &q->blkg_list, q_node) { + struct blkcg *blkcg = blkg->blkcg; + + spin_lock(&blkcg->lock); if (blkg->pd[pol->plid]) { pol->pd_free_fn(blkg->pd[pol->plid]); blkg->pd[pol->plid] = NULL; } + spin_unlock(&blkcg->lock); } spin_unlock_irq(&q->queue_lock); ret = -ENOMEM; @@ -1497,12 +1501,16 @@ void blkcg_deactivate_policy(struct request_queue *q, __clear_bit(pol->plid, q->blkcg_pols); list_for_each_entry(blkg, &q->blkg_list, q_node) { + struct blkcg *blkcg = blkg->blkcg; + + spin_lock(&blkcg->lock); if (blkg->pd[pol->plid]) { if (pol->pd_offline_fn) pol->pd_offline_fn(blkg->pd[pol->plid]); pol->pd_free_fn(blkg->pd[pol->plid]); blkg->pd[pol->plid] = NULL; } + spin_unlock(&blkcg->lock); } spin_unlock_irq(&q->queue_lock); From 2397ea2db22bed402fdc4c341dc4be3b49178991 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 14 Sep 2021 20:52:24 -0700 Subject: [PATCH 55/69] compiler.h: Introduce absolute_pointer macro [ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ] absolute_pointer() disassociates a pointer from its originating symbol type and context. Use it to prevent compiler warnings/errors such as drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Such warnings may be reported by gcc 11.x for string and memory operations on fixed addresses. Suggested-by: Linus Torvalds Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- include/linux/compiler.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 9446e8fbe55c..bce983406aaf 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -233,6 +233,8 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, (typeof(ptr)) (__ptr + (off)); }) #endif +#define absolute_pointer(val) RELOC_HIDE((void *)(val), 0) + #ifndef OPTIMIZER_HIDE_VAR /* Make the optimizer believe the variable can be manipulated arbitrarily. */ #define OPTIMIZER_HIDE_VAR(var) \ From 113a8edfb9c9fbdc16d967f2a0b539266e999f94 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 14 Sep 2021 20:52:25 -0700 Subject: [PATCH 56/69] net: i825xx: Use absolute_pointer for memcpy from fixed memory location [ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ] gcc 11.x reports the following compiler warning/error. drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Use absolute_pointer() to work around the problem. Cc: Geert Uytterhoeven Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- drivers/net/ethernet/i825xx/82596.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c index 92929750f832..54d5b402b0e8 100644 --- a/drivers/net/ethernet/i825xx/82596.c +++ b/drivers/net/ethernet/i825xx/82596.c @@ -1155,7 +1155,7 @@ struct net_device * __init i82596_probe(int unit) err = -ENODEV; goto out; } - memcpy(eth_addr, (void *) 0xfffc1f2c, ETH_ALEN); /* YUCK! Get addr from NOVRAM */ + memcpy(eth_addr, absolute_pointer(0xfffc1f2c), ETH_ALEN); /* YUCK! Get addr from NOVRAM */ dev->base_addr = MVME_I596_BASE; dev->irq = (unsigned) MVME16x_IRQ_I596; goto found; From 1214ace6140268d609e7c5b1dd6aeed70e6df73f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 6 Sep 2021 16:06:04 -0700 Subject: [PATCH 57/69] sparc: avoid stringop-overread errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ] The sparc mdesc code does pointer games with 'struct mdesc_hdr', but didn't describe to the compiler how that header is then followed by the data that the header describes. As a result, gcc is now unhappy since it does stricter pointer range tracking, and doesn't understand about how these things work. This results in various errors like: arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’: arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread] 647 | if (!strcmp(names + ep[ret].name_offset, name)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ which are easily avoided by just describing 'struct mdesc_hdr' better, and making the node_block() helper function look into that unsized data[] that follows the header. This makes the sparc64 build happy again at least for my cross-compiler version (gcc version 11.2.1). Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/ Cc: Guenter Roeck Cc: David S. Miller Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- arch/sparc/kernel/mdesc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c index 8e645ddac58e..30f171b7b00c 100644 --- a/arch/sparc/kernel/mdesc.c +++ b/arch/sparc/kernel/mdesc.c @@ -39,6 +39,7 @@ struct mdesc_hdr { u32 node_sz; /* node block size */ u32 name_sz; /* name block size */ u32 data_sz; /* data block size */ + char data[]; } __attribute__((aligned(16))); struct mdesc_elem { @@ -612,7 +613,7 @@ EXPORT_SYMBOL(mdesc_get_node_info); static struct mdesc_elem *node_block(struct mdesc_hdr *mdesc) { - return (struct mdesc_elem *) (mdesc + 1); + return (struct mdesc_elem *) mdesc->data; } static void *name_block(struct mdesc_hdr *mdesc) From 8cd34eb616d97add9a707e1fca19b5deeb7dc46f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 15 Sep 2021 13:56:37 -0700 Subject: [PATCH 58/69] qnx4: avoid stringop-overread errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ] The qnx4 directory entries are 64-byte blocks that have different contents depending on the a status byte that is in the last byte of the block. In particular, a directory entry can be either a "link info" entry with a 48-byte name and pointers to the real inode information, or an "inode entry" with a smaller 16-byte name and the full inode information. But the code was written to always just treat the directory name as if it was part of that "inode entry", and just extend the name to the longer case if the status byte said it was a link entry. That work just fine and gives the right results, but now that gcc is tracking data structure accesses much more, the code can trigger a compiler error about using up to 48 bytes (the long name) in a structure that only has that shorter name in it: fs/qnx4/dir.c: In function ‘qnx4_readdir’: fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread] 51 | size = strnlen(de->di_fname, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from fs/qnx4/qnx4.h:3, from fs/qnx4/dir.c:16: include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here 45 | char di_fname[QNX4_SHORT_NAME_MAX]; | ^~~~~~~~ which is because the source code doesn't really make this whole "one of two different types" explicit. Fix this by introducing a very explicit union of the two types, and basically explaining to the compiler what is really going on. Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- fs/qnx4/dir.c | 51 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 34 insertions(+), 17 deletions(-) diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c index a6ee23aadd28..2a66844b7ff8 100644 --- a/fs/qnx4/dir.c +++ b/fs/qnx4/dir.c @@ -15,13 +15,27 @@ #include #include "qnx4.h" +/* + * A qnx4 directory entry is an inode entry or link info + * depending on the status field in the last byte. The + * first byte is where the name start either way, and a + * zero means it's empty. + */ +union qnx4_directory_entry { + struct { + char de_name; + char de_pad[62]; + char de_status; + }; + struct qnx4_inode_entry inode; + struct qnx4_link_info link; +}; + static int qnx4_readdir(struct file *file, struct dir_context *ctx) { struct inode *inode = file_inode(file); unsigned int offset; struct buffer_head *bh; - struct qnx4_inode_entry *de; - struct qnx4_link_info *le; unsigned long blknum; int ix, ino; int size; @@ -38,27 +52,30 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx) } ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK; for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) { + union qnx4_directory_entry *de; + const char *name; + offset = ix * QNX4_DIR_ENTRY_SIZE; - de = (struct qnx4_inode_entry *) (bh->b_data + offset); - if (!de->di_fname[0]) + de = (union qnx4_directory_entry *) (bh->b_data + offset); + + if (!de->de_name) continue; - if (!(de->di_status & (QNX4_FILE_USED|QNX4_FILE_LINK))) + if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK))) continue; - if (!(de->di_status & QNX4_FILE_LINK)) - size = QNX4_SHORT_NAME_MAX; - else - size = QNX4_NAME_MAX; - size = strnlen(de->di_fname, size); - QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, de->di_fname)); - if (!(de->di_status & QNX4_FILE_LINK)) + if (!(de->de_status & QNX4_FILE_LINK)) { + size = sizeof(de->inode.di_fname); + name = de->inode.di_fname; ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1; - else { - le = (struct qnx4_link_info*)de; - ino = ( le32_to_cpu(le->dl_inode_blk) - 1 ) * + } else { + size = sizeof(de->link.dl_fname); + name = de->link.dl_fname; + ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) * QNX4_INODES_PER_BLOCK + - le->dl_inode_ndx; + de->link.dl_inode_ndx; } - if (!dir_emit(ctx, de->di_fname, size, ino, DT_UNKNOWN)) { + size = strnlen(name, size); + QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name)); + if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) { brelse(bh); return 0; } From aeb19da46c7dc0f46ce73bb7a4e7cdc549178b13 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 Sep 2021 08:35:42 +0200 Subject: [PATCH 59/69] parisc: Use absolute_pointer() to define PAGE0 [ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ] Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning: arch/parisc/kernel/setup.c: In function 'start_parisc': error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0 Signed-off-by: Helge Deller Co-Developed-by: Guenter Roeck Suggested-by: Linus Torvalds Signed-off-by: Sasha Levin --- arch/parisc/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h index 93caf17ac5e2..9ebf3b0413d5 100644 --- a/arch/parisc/include/asm/page.h +++ b/arch/parisc/include/asm/page.h @@ -181,7 +181,7 @@ extern int npmem_ranges; #include #include -#define PAGE0 ((struct zeropage *)__PAGE_OFFSET) +#define PAGE0 ((struct zeropage *)absolute_pointer(__PAGE_OFFSET)) /* DEFINITION OF THE ZERO-PAGE (PAG0) */ /* based on work by Jason Eckhardt (jason@equator.com) */ From af4a142ab798415b40d46d2956e091b4c3d156de Mon Sep 17 00:00:00 2001 From: Dan Li Date: Tue, 14 Sep 2021 17:44:02 +0800 Subject: [PATCH 60/69] arm64: Mark __stack_chk_guard as __ro_after_init [ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ] __stack_chk_guard is setup once while init stage and never changed after that. Although the modification of this variable at runtime will usually cause the kernel to crash (so does the attacker), it should be marked as __ro_after_init, and it should not affect performance if it is placed in the ro_after_init section. Signed-off-by: Dan Li Acked-by: Mark Rutland Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin --- arch/arm64/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 7d7cfa128b71..f61ef46ebff7 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -56,7 +56,7 @@ #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK) #include -unsigned long __stack_chk_guard __read_mostly; +unsigned long __stack_chk_guard __ro_after_init; EXPORT_SYMBOL(__stack_chk_guard); #endif From fa56f2c987c752e365324c26cc7fc0255a370d7f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 8 Sep 2021 22:00:33 -0700 Subject: [PATCH 61/69] alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile [ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ] Some drivers pass a pointer to volatile data to virt_to_bus() and virt_to_phys(), and that works fine. One exception is alpha. This results in a number of compile errors such as drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset': drivers/net/wan/lmc/lmc_main.c:1782:50: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type drivers/atm/ambassador.c: In function 'do_loader_command': drivers/atm/ambassador.c:1747:58: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type Declare the parameter of virt_to_phys and virt_to_bus as pointer to volatile to fix the problem. Signed-off-by: Guenter Roeck Acked-by: Arnd Bergmann Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- arch/alpha/include/asm/io.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h index 103270d5a9fc..66a384a4ddba 100644 --- a/arch/alpha/include/asm/io.h +++ b/arch/alpha/include/asm/io.h @@ -61,7 +61,7 @@ extern inline void set_hae(unsigned long new_hae) * Change virtual addresses to physical addresses and vv. */ #ifdef USE_48_BIT_KSEG -static inline unsigned long virt_to_phys(void *address) +static inline unsigned long virt_to_phys(volatile void *address) { return (unsigned long)address - IDENT_ADDR; } @@ -71,7 +71,7 @@ static inline void * phys_to_virt(unsigned long address) return (void *) (address + IDENT_ADDR); } #else -static inline unsigned long virt_to_phys(void *address) +static inline unsigned long virt_to_phys(volatile void *address) { unsigned long phys = (unsigned long)address; @@ -107,7 +107,7 @@ static inline void * phys_to_virt(unsigned long address) extern unsigned long __direct_map_base; extern unsigned long __direct_map_size; -static inline unsigned long __deprecated virt_to_bus(void *address) +static inline unsigned long __deprecated virt_to_bus(volatile void *address) { unsigned long phys = virt_to_phys(address); unsigned long bus = phys + __direct_map_base; From d193f7dbf4ec520e1ca8f11667fe929ec4c0becc Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 8 Sep 2021 20:57:43 -0700 Subject: [PATCH 62/69] net: 6pack: Fix tx timeout and slot time [ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ] tx timeout and slot time are currently specified in units of HZ. On Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this results in the following error message. drivers/net/hamradio/6pack.c: In function 'sixpack_open': drivers/net/hamradio/6pack.c:71:41: error: unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' In the 6PACK protocol, tx timeout is specified in units of 10 ms and transmitted over the wire: https://www.linux-ax25.org/wiki/6PACK Defining a value dependent on HZ doesn't really make sense, and presumably comes from the (very historical) situation where HZ was originally 100. Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); and the SIXP_TXDELAY walue is sent as a byte over the wire. Signed-off-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- drivers/net/hamradio/6pack.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index da13683d52d1..bd0beb16d68a 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -68,9 +68,9 @@ #define SIXP_DAMA_OFF 0 /* default level 2 parameters */ -#define SIXP_TXDELAY (HZ/4) /* in 1 s */ +#define SIXP_TXDELAY 25 /* 250 ms */ #define SIXP_PERSIST 50 /* in 256ths */ -#define SIXP_SLOTTIME (HZ/10) /* in 1 s */ +#define SIXP_SLOTTIME 10 /* 100 ms */ #define SIXP_INIT_RESYNC_TIMEOUT (3*HZ/2) /* in 1 s */ #define SIXP_RESYNC_TIMEOUT 5*HZ /* in 1 s */ From 8ede848bc99e8bf34082b37306216df3b5cf4543 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 18 Sep 2021 10:05:06 -0700 Subject: [PATCH 63/69] spi: Fix tegra20 build with CONFIG_PM=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ] Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being empty, and the only use of tegra_slink_runtime_{resume,suspend} goes away, resulting in drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function] 1200 | static int tegra_slink_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function] 1188 | static int tegra_slink_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mark the functions __maybe_unused to make the build happy. This hits the alpha allmodconfig build (and others). Reported-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- drivers/spi/spi-tegra20-slink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 2a1905c43a0b..9b59539c8735 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1205,7 +1205,7 @@ static int tegra_slink_resume(struct device *dev) } #endif -static int tegra_slink_runtime_suspend(struct device *dev) +static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct tegra_slink_data *tspi = spi_master_get_devdata(master); @@ -1217,7 +1217,7 @@ static int tegra_slink_runtime_suspend(struct device *dev) return 0; } -static int tegra_slink_runtime_resume(struct device *dev) +static int __maybe_unused tegra_slink_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct tegra_slink_data *tspi = spi_master_get_devdata(master); From de1c3506806d07c284138389d7cb54f797e37ffa Mon Sep 17 00:00:00 2001 From: Sai Krishna Potthuri Date: Wed, 18 Aug 2021 12:53:14 +0530 Subject: [PATCH 64/69] EDAC/synopsys: Fix wrong value type assignment for edac_mode commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream. dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman --- drivers/edac/synopsys_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index 880ffd833718..6becf3363ad5 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c @@ -782,7 +782,7 @@ static void init_csrows(struct mem_ctl_info *mci) for (j = 0; j < csi->nr_channels; j++) { dimm = csi->channels[j]->dimm; - dimm->edac_mode = EDAC_FLAG_SECDED; + dimm->edac_mode = EDAC_SECDED; dimm->mtype = p_data->get_mtype(priv->baseaddr); dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; dimm->grain = SYNPS_EDAC_ERR_GRAIN; From 04783de9c0f3c69741b5e7a5e957f26d6914130c Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 9 Sep 2021 10:56:12 +0200 Subject: [PATCH 65/69] thermal/drivers/int340x: Do not set a wrong tcc offset on resume commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream. After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de6692e, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de6692e, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: stable@vger.kernel.org Cc: Srinivas Pandruvada Signed-off-by: Antoine Tenart Signed-off-by: Daniel Lezcano Reviewed-by: Srinivas Pandruvada Tested-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org Signed-off-by: Greg Kroah-Hartman --- .../thermal/intel/int340x_thermal/processor_thermal_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c index 576523d0326c..a902e2a053ee 100644 --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c @@ -179,7 +179,7 @@ static int tcc_offset_update(unsigned int tcc) return 0; } -static unsigned int tcc_offset_save; +static int tcc_offset_save = -1; static ssize_t tcc_offset_degree_celsius_store(struct device *dev, struct device_attribute *attr, const char *buf, @@ -703,7 +703,8 @@ static int proc_thermal_resume(struct device *dev) proc_dev = dev_get_drvdata(dev); proc_thermal_read_ppcc(proc_dev); - tcc_offset_update(tcc_offset_save); + if (tcc_offset_save >= 0) + tcc_offset_update(tcc_offset_save); return 0; } From f80b6793811d79f5761d8c1315c09238e2ac295e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Thu, 24 Jun 2021 23:55:46 +0200 Subject: [PATCH 66/69] arm64: dts: marvell: armada-37xx: Extend PCIe MEM space MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a upstream. Current PCIe MEM space of size 16 MB is not enough for some combination of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted Firmware for Armada 3700 platform already assigns 128 MB for PCIe window, so extend PCIe MEM space to the end of 128 MB PCIe window which allows to allocate more PCIe BARs for more PCIe cards. Without this change some combination of PCIe cards cannot be used and kernel show error messages in dmesg during initialization: pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref] pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000] pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000] pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000] pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000] pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit] pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit] Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot crashes during loading of kernel DTB file. This bug is present only in U-Boot code for Turris Mox and therefore other Armada 3700 devices are not affected by this bug. Bug is fixed in U-Boot version 2021.07. To not break booting new kernels on existing versions of U-Boot on Turris Mox, use first 16 MB range for IO and second range with rest of PCIe window for MEM. Signed-off-by: Pali Rohár Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman --- .../boot/dts/marvell/armada-3720-turris-mox.dts | 17 +++++++++++++++++ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +++++++++-- 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 025e02d23da9..de0eabff2935 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -138,6 +138,23 @@ max-link-speed = <2>; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; phys = <&comphy1 0>; + /* + * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property + * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and + * 2 size cells and also expects that the second range starts at 16 MB offset. If these + * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address + * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window + * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. + * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in + * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): + * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 + * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf + * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 + */ + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ + 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ /* enabled by U-Boot if PCIe module is present */ status = "disabled"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 52767037e049..c28611c1c251 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -487,8 +487,15 @@ #interrupt-cells = <1>; msi-parent = <&pcie0>; msi-controller; - ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ - 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + /* + * The 128 MiB address range [0xe8000000-0xf0000000] is + * dedicated for PCIe and can be assigned to 8 windows + * with size a power of two. Use one 64 KiB window for + * IO at the end and the remaining seven windows + * (totaling 127 MiB) for MEM. + */ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0xefff0000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, From 3a0f951e37259309ad851e3d7491061d21657108 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 20 Sep 2021 12:03:45 +0200 Subject: [PATCH 67/69] xen/balloon: fix balloon kthread freezing commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream. Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") switched the Xen balloon driver to use a kernel thread. Unfortunately the patch omitted to call try_to_freeze() or to use wait_event_freezable_timeout(), causing a system suspend to fail. Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman --- drivers/xen/balloon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2762d246991b..be31c296eed4 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -539,8 +539,8 @@ static int balloon_thread(void *unused) timeout = 3600 * HZ; credit = current_credit(); - wait_event_interruptible_timeout(balloon_thread_wq, - balloon_thread_cond(state, credit), timeout); + wait_event_freezable_timeout(balloon_thread_wq, + balloon_thread_cond(state, credit), timeout); if (kthread_should_stop()) return 0; From 27f8c4402c4af24a261bf509338e98857002b14d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Sep 2021 10:26:21 -0700 Subject: [PATCH 68/69] qnx4: work around gcc false positive warning bug commit d5f6545934c47e97c0b48a645418e877b452a992 upstream. In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried to teach gcc about how the directory entry structure can be two different things depending on a status flag. It made the code clearer, and it seemed to make gcc happy. However, Arnd points to a gcc bug, where despite using two different members of a union, gcc then gets confused, and uses the size of one of the members to decide if a string overrun happens. And not necessarily the rigth one. End result: with some configurations, gcc-11 will still complain about the source buffer size being overread: fs/qnx4/dir.c: In function 'qnx4_readdir': fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread] 76 | size = strnlen(name, size); | ^~~~~~~~~~~~~~~~~~~ fs/qnx4/dir.c:26:22: note: source object declared here 26 | char de_name; | ^~~~~~~ because gcc will get confused about which union member entry is actually getting accessed, even when the source code is very clear about it. Gcc internally will have combined two "redundant" pointers (pointing to different union elements that are at the same offset), and takes the size checking from one or the other - not necessarily the right one. This is clearly a gcc bug, but we can work around it fairly easily. The biggest thing here is the big honking comment about why we do what we do. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 Reported-and-tested-by: Arnd Bergmann Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/qnx4/dir.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c index 2a66844b7ff8..66645a5a35f3 100644 --- a/fs/qnx4/dir.c +++ b/fs/qnx4/dir.c @@ -20,12 +20,33 @@ * depending on the status field in the last byte. The * first byte is where the name start either way, and a * zero means it's empty. + * + * Also, due to a bug in gcc, we don't want to use the + * real (differently sized) name arrays in the inode and + * link entries, but always the 'de_name[]' one in the + * fake struct entry. + * + * See + * + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 + * + * for details, but basically gcc will take the size of the + * 'name' array from one of the used union entries randomly. + * + * This use of 'de_name[]' (48 bytes) avoids the false positive + * warnings that would happen if gcc decides to use 'inode.di_name' + * (16 bytes) even when the pointer and size were to come from + * 'link.dl_name' (48 bytes). + * + * In all cases the actual name pointer itself is the same, it's + * only the gcc internal 'what is the size of this field' logic + * that can get confused. */ union qnx4_directory_entry { struct { - char de_name; - char de_pad[62]; - char de_status; + const char de_name[48]; + u8 de_pad[15]; + u8 de_status; }; struct qnx4_inode_entry inode; struct qnx4_link_info link; @@ -53,29 +74,26 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx) ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK; for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) { union qnx4_directory_entry *de; - const char *name; offset = ix * QNX4_DIR_ENTRY_SIZE; de = (union qnx4_directory_entry *) (bh->b_data + offset); - if (!de->de_name) + if (!de->de_name[0]) continue; if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK))) continue; if (!(de->de_status & QNX4_FILE_LINK)) { size = sizeof(de->inode.di_fname); - name = de->inode.di_fname; ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1; } else { size = sizeof(de->link.dl_fname); - name = de->link.dl_fname; ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) * QNX4_INODES_PER_BLOCK + de->link.dl_inode_ndx; } - size = strnlen(name, size); + size = strnlen(de->de_name, size); QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name)); - if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) { + if (!dir_emit(ctx, de->de_name, size, ino, DT_UNKNOWN)) { brelse(bh); return 0; } From 3a7dc5b4cfbdfd8da37cb0e54f439d84cf5a5123 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 30 Sep 2021 10:09:26 +0200 Subject: [PATCH 69/69] Linux 5.4.150 Link: https://lore.kernel.org/r/20210927170219.901812470@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Hulk Robot Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 1834f47fbaf6..c6b3a3d62f6c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 149 +SUBLEVEL = 150 EXTRAVERSION = NAME = Kleptomaniac Octopus