From f0a396fdb70bcabe3fff2e30900f6d35d3e2b4c5 Mon Sep 17 00:00:00 2001
From: Om Parkash <oparkash@qti.qualcomm.com>
Date: Wed, 26 May 2021 19:21:25 +0530
Subject: [PATCH] ARM: dts: msm: Add pin controls for camera GPIOs

Add pin controls for camera and camera sensor GPIOs.

Change-Id: If5eeed86b16735a227159553a78bda867f775295
---
 qcom/monaco-pinctrl.dtsi | 170 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 170 insertions(+)

diff --git a/qcom/monaco-pinctrl.dtsi b/qcom/monaco-pinctrl.dtsi
index a5ad5c9e3b73..3df0cea442f1 100644
--- a/qcom/monaco-pinctrl.dtsi
+++ b/qcom/monaco-pinctrl.dtsi
@@ -778,6 +778,176 @@
 			};
 		};
 
+		cci0_suspend: cci0_suspend {
+			mux {
+				/* CLK, DATA*/
+				pins = "gpio38", "gpio37";
+				function = "cci_i2c";
+			};
+
+			config {
+				pins = "gpio38", "gpio37";
+				bias-pull-down; /* PULL DOWN */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cci0_active: cci0_active {
+			mux {
+				/* CLK, DATA*/
+				pins = "gpio38", "gpio37";
+				function = "cci_i2c";
+			};
+
+			config {
+				pins = "gpio38", "gpio37";
+				bias-pull-up; /* PULL UP*/
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cci1_suspend: cci1_suspend {
+			mux {
+				/* CLK, DATA*/
+				pins = "gpio40", "gpio39";
+				function = "cci_i2c";
+			};
+
+			config {
+				pins = "gpio40", "gpio39";
+				bias-pull-down; /* PULL DOWN */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cci1_active: cci1_active {
+			mux {
+				/* CLK, DATA*/
+				pins = "gpio40", "gpio39";
+				function = "cci_i2c";
+			};
+
+			config {
+				pins = "gpio40", "gpio39";
+				bias-pull-up; /* PULL UP*/
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+			/* MCLK 0*/
+			mux {
+				pins = "gpio32";
+				function = "cam_mclk";
+			};
+
+			config {
+				pins = "gpio32";
+				bias-disable; /* No PULL */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+			/* MCLK 0*/
+			mux {
+				pins = "gpio32";
+				function = "cam_mclk";
+			};
+
+			config {
+				pins = "gpio32";
+				bias-pull-down; /* PULL DOWN */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+			/* MCLK 1*/
+			mux {
+				pins = "gpio33";
+				function = "cam_mclk";
+			};
+
+			config {
+				pins = "gpio33";
+				bias-disable; /* No PULL */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+			/* MCLK 1*/
+			mux {
+				pins = "gpio33";
+				function = "cam_mclk";
+			};
+
+			config {
+				pins = "gpio33";
+				bias-pull-down; /* PULL DOWN */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_rear0_reset_active: cam_sensor_rear0_reset_active {
+			/* RESET0 */
+			mux {
+				pins = "gpio35";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio35";
+				bias-disable; /* No PULL */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_rear0_reset_suspend: cam_sensor_rear0_reset_suspend {
+			/* RESET0 */
+			mux {
+				pins = "gpio35";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio35";
+				bias-pull-down; /* PULL DOWN */
+				drive-strength = <2>; /* 2 MA */
+				output-low;
+			};
+		};
+
+		cam_sensor_front0_reset_active: cam_sensor_front0_reset_active {
+			/* RESET0 */
+			mux {
+				pins = "gpio36";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio36";
+				bias-disable; /* No PULL */
+				drive-strength = <2>; /* 2 MA */
+			};
+		};
+
+		cam_sensor_front0_reset_suspend: cam_sensor_front0_reset_suspend {
+			/* RESET0 */
+			mux {
+				pins = "gpio36";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio36";
+				bias-pull-down; /* PULL DOWN */
+				drive-strength = <2>; /* 2 MA */
+				output-low;
+			};
+		};
+
 		/* SDC pin type */
 		sdc1_on: sdc1_on {
 			clk {