arm64/dt: config nfc dts node for cypfq and cypfr

Cyprus 5G 4350 pro and 6375 use i2c 7 bus for nfc
Nfc controller is st21nfcj

Change-Id: I28b814f7e8b1ab3047c16a5c253aaf7f3d995733
Signed-off-by: wuwl10 <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/2000093
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This commit is contained in:
wuwl10 2021-07-02 10:18:24 +08:00 • committed by panyq6
commit f25e87bc6e
2 changed files with 26 additions and 26 deletions

View file

@ -183,26 +183,26 @@
};
};
&qupv3_se0_i2c {
&qupv3_se7_i2c {
status = "ok"
#address-cells = <1>;
#size-cells = <0>;
nq@28 {
compatible = "qcom,sn-nci";
reg = <0x28>;
qcom,sn-irq = <&tlmm 9 0x00>;
qcom,sn-ven = <&tlmm 6 0x00>;
qcom,sn-firm = <&tlmm 8 0x00>;
qcom,sn-clkreq = <&tlmm 7 0x00>;
qcom,sn-vdd-1p8-supply = <&L9A>;
qcom,sn-vdd-1p8-voltage = <1800000 1800000>;
qcom,sn-vdd-1p8-current = <157000>;
st21nfc@8 {
compatible = "st,st21nfc";
mmi,status = "/chosen", "mmi,nfc", "st"
status = "ok"
reg = <0x08>;
st,irq_gpio = <&tlmm 9 0x00>;
st,reset_gpio = <&tlmm 48 0x00>;
st,clkreq_gpio = <&tlmm 7 0x00>;
interrupt-parent = <&tlmm>;
interrupts = <9 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
pinctrl-0 = <&nfc_int_active &nfc_enable_active
&nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
&nfc_clk_req_suspend>;
};
};

View file

@ -181,26 +181,26 @@
};
};
&qupv3_se0_i2c {
&qupv3_se7_i2c {
status = "ok"
#address-cells = <1>;
#size-cells = <0>;
nq@28 {
compatible = "qcom,sn-nci";
reg = <0x28>;
qcom,sn-irq = <&tlmm 9 0x00>;
qcom,sn-ven = <&tlmm 6 0x00>;
qcom,sn-firm = <&tlmm 8 0x00>;
qcom,sn-clkreq = <&tlmm 7 0x00>;
qcom,sn-vdd-1p8-supply = <&L9A>;
qcom,sn-vdd-1p8-voltage = <1800000 1800000>;
qcom,sn-vdd-1p8-current = <157000>;
st21nfc@8 {
compatible = "st,st21nfc";
mmi,status = "/chosen", "mmi,nfc", "st"
status = "ok"
reg = <0x08>;
st,irq_gpio = <&tlmm 9 0x00>;
st,reset_gpio = <&tlmm 48 0x00>;
st,clkreq_gpio = <&tlmm 7 0x00>;
interrupt-parent = <&tlmm>;
interrupts = <9 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
pinctrl-0 = <&nfc_int_active &nfc_enable_active
&nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
&nfc_clk_req_suspend>;
};
};