qcacld-3.0: replace mhz of struct wma_txrx_node with chan_freq

chan_freq and mhz variable represent the same thing so use chan_freq
instead of mhz.

Change-Id: I4162504562c30ece71f5ebc465b1af3a048b01b2
CRs-Fixed: 2696795
This commit is contained in:
Utkarsh Bhatnagar 2020-05-28 12:56:11 +05:30 • committed by nshrivas
commit f31d749e83
6 changed files with 12 additions and 15 deletions

View file

@ -665,7 +665,6 @@ struct wma_invalid_peer_params {
* @llbCoexist: 11b coexist
* @shortSlotTimeSupported: is short slot time supported or not
* @dtimPeriod: DTIM period
* @mhz: channel frequency in KHz
* @chan_width: channel bandwidth
* @vdev_up: is vdev up or not
* @tsfadjust: TSF adjust
@ -714,7 +713,6 @@ struct wma_txrx_node {
uint8_t llbCoexist;
uint8_t shortSlotTimeSupported;
uint8_t dtimPeriod;
A_UINT32 mhz;
enum phy_ch_width chan_width;
bool vdev_active;
uint64_t tsfadjust;

View file

@ -1279,7 +1279,7 @@ QDF_STATUS wma_process_rate_update_indicate(tp_wma_handle wma,
__func__, pRateUpdateParams->bssid.bytes,
intr[vdev_id].config.shortgi, rate_flag);
ret = wma_encode_mc_rate(short_gi, intr[vdev_id].config.chwidth,
intr[vdev_id].mhz, mbpsx10_rate,
intr[vdev_id].ch_freq, mbpsx10_rate,
pRateUpdateParams->nss, &rate);
if (ret != QDF_STATUS_SUCCESS) {
WMA_LOGE("%s: Error, Invalid input rate value", __func__);
@ -2586,9 +2586,9 @@ QDF_STATUS wma_tx_packet(void *wma_context, void *tx_frame, uint16_t frmLen,
use_6mbps = 1;
if (pFc->subType == SIR_MAC_MGMT_PROBE_RSP) {
if ((wma_is_vdev_in_ap_mode(wma_handle, vdev_id)) &&
(0 != wma_handle->interfaces[vdev_id].mhz))
chanfreq = wma_handle->interfaces[vdev_id].mhz;
if (wma_is_vdev_in_ap_mode(wma_handle, vdev_id) &&
wma_handle->interfaces[vdev_id].ch_freq)
chanfreq = wma_handle->interfaces[vdev_id].ch_freq;
else
chanfreq = channel_freq;
WMA_LOGD("%s: Probe response frame on channel %d vdev:%d",
@ -2663,7 +2663,7 @@ QDF_STATUS wma_tx_packet(void *wma_context, void *tx_frame, uint16_t frmLen,
PKT_CAPTURE_MODE_MGMT_ONLY) {
ucfg_pkt_capture_mgmt_tx(wma_handle->pdev,
tx_frame,
wma_handle->interfaces[vdev_id].mhz,
wma_handle->interfaces[vdev_id].ch_freq,
mgmt_param.tx_param.preamble_type);
}

View file

@ -850,9 +850,9 @@ static void wma_find_mcc_ap(tp_wma_handle wma, uint8_t vdev_id, bool add)
ap_vdev_ids[i] = i;
}
if (wma->interfaces[i].mhz != prev_ch_freq) {
if (wma->interfaces[i].ch_freq != prev_ch_freq) {
num_ch++;
prev_ch_freq = wma->interfaces[i].mhz;
prev_ch_freq = wma->interfaces[i].ch_freq;
}
}
}
@ -2764,7 +2764,6 @@ QDF_STATUS wma_vdev_pre_start(uint8_t vdev_id, bool restart)
CFG_TGT_DEFAULT_GTX_TPC_MIN;
intr[vdev_id].config.gtx_info.gtxBWMask =
CFG_TGT_DEFAULT_GTX_BW_MASK;
intr[vdev_id].mhz = des_chan->ch_freq;
intr[vdev_id].chan_width = des_chan->ch_width;
intr[vdev_id].ch_freq = des_chan->ch_freq;
intr[vdev_id].ch_flagext = des_chan->ch_flagext;

View file

@ -1214,7 +1214,7 @@ int wma_csa_offload_handler(void *handle, uint8_t *event, uint32_t len)
csa_offload_event->new_ch_freq_seg2,
csa_offload_event->new_op_class);
cur_chan = cds_freq_to_chan(intr[vdev_id].mhz);
cur_chan = cds_freq_to_chan(intr[vdev_id].ch_freq);
/*
* basic sanity check: requested channel should not be 0
* and equal to home channel

View file

@ -2792,7 +2792,7 @@ static void wma_update_phymode_on_roam(tp_wma_handle wma, uint8_t *bssid,
struct vdev_mlme_obj *vdev_mlme;
uint8_t channel;
channel = wlan_freq_to_chan(iface->mhz);
channel = wlan_freq_to_chan(iface->ch_freq);
if (chan)
bss_phymode =
wma_fw_to_host_phymode(WMI_GET_CHANNEL_MODE(chan));
@ -3024,7 +3024,7 @@ int wma_mlme_roam_synch_event_handler_cb(void *handle, uint8_t *event,
wma_process_roam_synch_complete(wma, synch_event->vdev_id);
/* update freq and channel width */
wma->interfaces[synch_event->vdev_id].mhz =
wma->interfaces[synch_event->vdev_id].ch_freq =
roam_synch_ind_ptr->chan_freq;
if (roam_synch_ind_ptr->join_rsp)
wma->interfaces[synch_event->vdev_id].chan_width =

View file

@ -3572,7 +3572,7 @@ QDF_STATUS wma_get_connection_info(uint8_t vdev_id,
}
conn_table_entry->chan_width = wma_conn_table_entry->chan_width;
conn_table_entry->mac_id = wma_conn_table_entry->mac_id;
conn_table_entry->mhz = wma_conn_table_entry->mhz;
conn_table_entry->mhz = wma_conn_table_entry->ch_freq;
conn_table_entry->sub_type = wma_conn_table_entry->sub_type;
conn_table_entry->type = wma_conn_table_entry->type;
conn_table_entry->ch_flagext = wma_conn_table_entry->ch_flagext;
@ -3603,7 +3603,7 @@ QDF_STATUS wma_ndi_update_connection_info(uint8_t vdev_id,
}
wma_iface_entry->chan_width = ndp_chan_info->ch_width;
wma_iface_entry->mhz = ndp_chan_info->freq;
wma_iface_entry->ch_freq = ndp_chan_info->freq;
wma_iface_entry->nss = ndp_chan_info->nss;
wma_iface_entry->mac_id = ndp_chan_info->mac_id;