ARM: SoC driver updates

Some of the larger changes this merge window:
  - Removal of drivers for Exynos5440, a Samsung SoC that never saw
    widespread use.
  - Uniphier support for USB3 and SPI reset handling
  - Syste control and SRAM drivers and bindings for Allwinner platforms
  - Qualcomm AOSS (Always-on subsystem) reset controller drivers
  - Raspberry Pi hwmon driver for voltage
  - Mediatek pwrap (pmic) support for MT6797 SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+MMkPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3pB4QAIj7iVxSKEQFz65iXLTfMJKFZ9TSvRgWSDyE
 CHF+WOQGTnxkvySEHSw/SNqDM+Bas8ijR8b4vWzsXJFB+3HA0ZTGLU379/af1zCE
 9k8QjyIWtRWKX9fo7qCHVXlMfxGbOdbCOsh4jnmHqEIDxCHXpIiJRfvUbKIXGpfn
 tw6QpM70vm6Q6AdKwzmDbMCYnQAMWxBK/G/Q7BfRG+IYWYjFGbiWIc9BV9Ki8+nE
 3235ISaTHvAHodoec8tpLxv34GsOP4RCqscGYEuCf22RYfWva4S9e4yoWT8qPoIl
 IHWNsE3YWjksqpt9rj9Pie/PycthO4E4BUPMtqjMbC2OyKFgVsAcHrmToSdd+7ob
 t3VNM6RVl8xyWSRlm5ioev15CCOeWRi1nUT7m3UEBWpQ6ihJVpbjf1vVxZRW/E0t
 cgC+XzjSg26sWx1bSH9lGPFytOblAcZ04GG/Kpz02MmTgMiTdODFZ67AsqtdeQS7
 a9wpaQ+DgTqU0VcQx8Kdq8uy9MOztkhXn5yO8fEWjpm0lPcxjhJS4EpN+Ru2T7/Z
 AMuy5lRJfQzAPU9kY7TE0yZ07pgpZgh7LlWOoKtGD7UklzXVVZrVlpn7bApRN5vg
 ZLze5OiEiIF5gIiRC8sIyQ9TZdvg4NqwebCqspINixqs7iIpB7TG93WQcy82osSE
 TXhtx4Sy
 =ZjwY
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Some of the larger changes this merge window:

   - Removal of drivers for Exynos5440, a Samsung SoC that never saw
     widespread use.

   - Uniphier support for USB3 and SPI reset handling

   - Syste control and SRAM drivers and bindings for Allwinner platforms

   - Qualcomm AOSS (Always-on subsystem) reset controller drivers

   - Raspberry Pi hwmon driver for voltage

   - Mediatek pwrap (pmic) support for MT6797 SoC"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
  drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple
  usb: host: exynos: Remove support for Exynos5440
  clk: samsung: Remove support for Exynos5440
  soc: sunxi: Add the A13, A23 and H3 system control compatibles
  reset: uniphier: add reset control support for SPI
  cpufreq: exynos: Remove support for Exynos5440
  ata: ahci-platform: Remove support for Exynos5440
  soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
  soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
  soc: mediatek: pwrap: fix cipher init setting error
  dt-bindings: pwrap: mediatek: add pwrap support for MT6797
  reset: uniphier: add USB3 core reset control
  dt-bindings: reset: uniphier: add USB3 core reset support
  ...

drivers/reset/Kconfig

@@ -82,6 +82,15 @@ config RESET_PISTACHIO
 	help
 	  This enables the reset driver for ImgTec Pistachio SoCs.
 
+config RESET_QCOM_AOSS
+	bool "Qcom AOSS Reset Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  This enables the AOSS (always on subsystem) reset driver
+	  for Qualcomm SDM845 SoCs. Say Y if you want to control
+	  reset signals provided by AOSS for Modem, Venus, ADSP,
+	  GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
+
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
 	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
@@ -138,6 +147,16 @@ config RESET_UNIPHIER
 	  Say Y if you want to control reset signals provided by System Control
 	  block, Media I/O block, Peripheral Block.
 
+config RESET_UNIPHIER_USB3
+	tristate "USB3 reset driver for UniPhier SoCs"
+	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+	default ARCH_UNIPHIER
+	select RESET_SIMPLE
+	help
+	  Support for the USB3 core reset on UniPhier SoCs.
+	  Say Y if you want to control reset signals provided by
+	  USB3 glue layer.
+
 config RESET_ZYNQ
 	bool "ZYNQ Reset Driver" if COMPILE_TEST
 	default ARCH_ZYNQ

drivers/reset/Makefile

@@ -14,11 +14,13 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
 obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
+obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
 

drivers/reset/reset-qcom-aoss.c

@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+
+struct qcom_aoss_reset_map {
+	unsigned int reg;
+};
+
+struct qcom_aoss_desc {
+	const struct qcom_aoss_reset_map *resets;
+	size_t num_resets;
+};
+
+struct qcom_aoss_reset_data {
+	struct reset_controller_dev rcdev;
+	void __iomem *base;
+	const struct qcom_aoss_desc *desc;
+};
+
+static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = {
+	[AOSS_CC_MSS_RESTART] = {0x10000},
+	[AOSS_CC_CAMSS_RESTART] = {0x11000},
+	[AOSS_CC_VENUS_RESTART] = {0x12000},
+	[AOSS_CC_GPU_RESTART] = {0x13000},
+	[AOSS_CC_DISPSS_RESTART] = {0x14000},
+	[AOSS_CC_WCSS_RESTART] = {0x20000},
+	[AOSS_CC_LPASS_RESTART] = {0x30000},
+};
+
+static const struct qcom_aoss_desc sdm845_aoss_desc = {
+	.resets = sdm845_aoss_resets,
+	.num_resets = ARRAY_SIZE(sdm845_aoss_resets),
+};
+
+static inline struct qcom_aoss_reset_data *to_qcom_aoss_reset_data(
+				struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct qcom_aoss_reset_data, rcdev);
+}
+
+static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev,
+				    unsigned long idx)
+{
+	struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
+	const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
+
+	writel(1, data->base + map->reg);
+	/* Wait 6 32kHz sleep cycles for reset */
+	usleep_range(200, 300);
+	return 0;
+}
+
+static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev,
+				      unsigned long idx)
+{
+	struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
+	const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
+
+	writel(0, data->base + map->reg);
+	/* Wait 6 32kHz sleep cycles for reset */
+	usleep_range(200, 300);
+	return 0;
+}
+
+static int qcom_aoss_control_reset(struct reset_controller_dev *rcdev,
+					unsigned long idx)
+{
+	qcom_aoss_control_assert(rcdev, idx);
+
+	return qcom_aoss_control_deassert(rcdev, idx);
+}
+
+static const struct reset_control_ops qcom_aoss_reset_ops = {
+	.reset = qcom_aoss_control_reset,
+	.assert = qcom_aoss_control_assert,
+	.deassert = qcom_aoss_control_deassert,
+};
+
+static int qcom_aoss_reset_probe(struct platform_device *pdev)
+{
+	struct qcom_aoss_reset_data *data;
+	struct device *dev = &pdev->dev;
+	const struct qcom_aoss_desc *desc;
+	struct resource *res;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->desc = desc;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.ops = &qcom_aoss_reset_ops;
+	data->rcdev.nr_resets = desc->num_resets;
+	data->rcdev.of_node = dev->of_node;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id qcom_aoss_reset_of_match[] = {
+	{ .compatible = "qcom,sdm845-aoss-cc", .data = &sdm845_aoss_desc },
+	{}
+};
+
+static struct platform_driver qcom_aoss_reset_driver = {
+	.probe = qcom_aoss_reset_probe,
+	.driver  = {
+		.name = "qcom_aoss_reset",
+		.of_match_table = qcom_aoss_reset_of_match,
+	},
+};
+
+builtin_platform_driver(qcom_aoss_reset_driver);
+
+MODULE_DESCRIPTION("Qualcomm AOSS Reset Driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/reset-simple.c

@@ -87,6 +87,7 @@ const struct reset_control_ops reset_simple_ops = {
 	.deassert	= reset_simple_deassert,
 	.status		= reset_simple_status,
 };
+EXPORT_SYMBOL_GPL(reset_simple_ops);
 
 /**
  * struct reset_simple_devdata - simple reset controller properties

drivers/reset/reset-uniphier-usb3.c

@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// reset-uniphier-usb3.c - USB3 reset driver for UniPhier
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <[email protected]>
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "reset-simple.h"
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_usb3_reset_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+};
+
+struct uniphier_usb3_reset_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	struct reset_simple_data rdata;
+	const struct uniphier_usb3_reset_soc_data *data;
+};
+
+static int uniphier_usb3_reset_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_usb3_reset_priv *priv;
+	struct resource *res;
+	resource_size_t size;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data || priv->data->nclks > MAX_CLKS ||
+		    priv->data->nrsts > MAX_RSTS))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	size = resource_size(res);
+	priv->rdata.membase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->rdata.membase))
+		return PTR_ERR(priv->rdata.membase);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	spin_lock_init(&priv->rdata.lock);
+	priv->rdata.rcdev.owner = THIS_MODULE;
+	priv->rdata.rcdev.nr_resets = size * BITS_PER_BYTE;
+	priv->rdata.rcdev.ops = &reset_simple_ops;
+	priv->rdata.rcdev.of_node = dev->of_node;
+	priv->rdata.active_low = true;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = devm_reset_controller_register(dev, &priv->rdata.rcdev);
+	if (ret)
+		goto out_rst_assert;
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_usb3_reset_remove(struct platform_device *pdev)
+{
+	struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+};
+
+static const struct of_device_id uniphier_usb3_reset_match[] = {
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-reset",
+		.data = &uniphier_pro4_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-reset",
+		.data = &uniphier_pxs2_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-reset",
+		.data = &uniphier_pxs2_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-reset",
+		.data = &uniphier_pxs2_data,
+	},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match);
+
+static struct platform_driver uniphier_usb3_reset_driver = {
+	.probe = uniphier_usb3_reset_probe,
+	.remove = uniphier_usb3_reset_remove,
+	.driver = {
+		.name = "uniphier-usb3-reset",
+		.of_match_table = uniphier_usb3_reset_match,
+	},
+};
+module_platform_driver(uniphier_usb3_reset_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <[email protected]>");
+MODULE_DESCRIPTION("UniPhier USB3 Reset Driver");
+MODULE_LICENSE("GPL");

drivers/reset/reset-uniphier.c

@@ -202,6 +202,12 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
 #define UNIPHIER_PERI_RESET_FI2C(id, ch)		\
 	UNIPHIER_RESETX((id), 0x114, 24 + (ch))
 
+#define UNIPHIER_PERI_RESET_SCSSI(id)			\
+	UNIPHIER_RESETX((id), 0x110, 17)
+
+#define UNIPHIER_PERI_RESET_MCSSI(id)			\
+	UNIPHIER_RESETX((id), 0x114, 14)
+
 static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_UART(0, 0),
 	UNIPHIER_PERI_RESET_UART(1, 1),
@@ -212,6 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_I2C(6, 2),
 	UNIPHIER_PERI_RESET_I2C(7, 3),
 	UNIPHIER_PERI_RESET_I2C(8, 4),
+	UNIPHIER_PERI_RESET_SCSSI(11),
 	UNIPHIER_RESET_END,
 };
 
@@ -227,6 +234,8 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_FI2C(8, 4),
 	UNIPHIER_PERI_RESET_FI2C(9, 5),
 	UNIPHIER_PERI_RESET_FI2C(10, 6),
+	UNIPHIER_PERI_RESET_SCSSI(11),
+	UNIPHIER_PERI_RESET_MCSSI(12),
 	UNIPHIER_RESET_END,
 };