mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-29 03:01:39 -04:00
leds: leds-ns2: move LED modes mapping outside of the driver
On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO values to LED mode) is different from the one used on other boards supported by the leds-ns2 driver. With this patch the hardcoded mapping is removed from leds-ns2. Now, it must be defined either in the platform data (if an old-fashion board setup file is used) or in the DT node. In order to allow the later, this patch also introduces a modes-map property for the leds-ns2 DT binding. Signed-off-by: Vincent Donnefort <[email protected]> Signed-off-by: Jacek Anaszewski <[email protected]>
This commit is contained in:
parent
de88e71a91
commit
f7fafd083c
4 changed files with 85 additions and 48 deletions
|
|
@ -33,46 +33,20 @@
|
|||
#include <linux/of_gpio.h>
|
||||
|
||||
/*
|
||||
* The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
|
||||
* relation with the SATA activity. This capability is exposed through the
|
||||
* "sata" sysfs attribute.
|
||||
*
|
||||
* The following array detail the different LED registers and the combination
|
||||
* of their possible values:
|
||||
*
|
||||
* cmd_led | slow_led | /SATA active | LED state
|
||||
* | | |
|
||||
* 1 | 0 | x | off
|
||||
* - | 1 | x | on
|
||||
* 0 | 0 | 1 | on
|
||||
* 0 | 0 | 0 | blink (rate 300ms)
|
||||
* The Network Space v2 dual-GPIO LED is wired to a CPLD. Three different LED
|
||||
* modes are available: off, on and SATA activity blinking. The LED modes are
|
||||
* controlled through two GPIOs (command and slow): each combination of values
|
||||
* for the command/slow GPIOs corresponds to a LED mode.
|
||||
*/
|
||||
|
||||
enum ns2_led_modes {
|
||||
NS_V2_LED_OFF,
|
||||
NS_V2_LED_ON,
|
||||
NS_V2_LED_SATA,
|
||||
};
|
||||
|
||||
struct ns2_led_mode_value {
|
||||
enum ns2_led_modes mode;
|
||||
int cmd_level;
|
||||
int slow_level;
|
||||
};
|
||||
|
||||
static struct ns2_led_mode_value ns2_led_modval[] = {
|
||||
{ NS_V2_LED_OFF , 1, 0 },
|
||||
{ NS_V2_LED_ON , 0, 1 },
|
||||
{ NS_V2_LED_ON , 1, 1 },
|
||||
{ NS_V2_LED_SATA, 0, 0 },
|
||||
};
|
||||
|
||||
struct ns2_led_data {
|
||||
struct led_classdev cdev;
|
||||
unsigned cmd;
|
||||
unsigned slow;
|
||||
unsigned char sata; /* True when SATA mode active. */
|
||||
rwlock_t rw_lock; /* Lock GPIOs. */
|
||||
int num_modes;
|
||||
struct ns2_led_modval *modval;
|
||||
};
|
||||
|
||||
static int ns2_led_get_mode(struct ns2_led_data *led_dat,
|
||||
|
|
@ -88,10 +62,10 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
|
|||
cmd_level = gpio_get_value(led_dat->cmd);
|
||||
slow_level = gpio_get_value(led_dat->slow);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
|
||||
if (cmd_level == ns2_led_modval[i].cmd_level &&
|
||||
slow_level == ns2_led_modval[i].slow_level) {
|
||||
*mode = ns2_led_modval[i].mode;
|
||||
for (i = 0; i < led_dat->num_modes; i++) {
|
||||
if (cmd_level == led_dat->modval[i].cmd_level &&
|
||||
slow_level == led_dat->modval[i].slow_level) {
|
||||
*mode = led_dat->modval[i].mode;
|
||||
ret = 0;
|
||||
break;
|
||||
}
|
||||
|
|
@ -110,12 +84,12 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
|
|||
|
||||
write_lock_irqsave(&led_dat->rw_lock, flags);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
|
||||
if (mode == ns2_led_modval[i].mode) {
|
||||
for (i = 0; i < led_dat->num_modes; i++) {
|
||||
if (mode == led_dat->modval[i].mode) {
|
||||
gpio_set_value(led_dat->cmd,
|
||||
ns2_led_modval[i].cmd_level);
|
||||
led_dat->modval[i].cmd_level);
|
||||
gpio_set_value(led_dat->slow,
|
||||
ns2_led_modval[i].slow_level);
|
||||
led_dat->modval[i].slow_level);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -228,6 +202,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
|
|||
led_dat->cdev.groups = ns2_led_groups;
|
||||
led_dat->cmd = template->cmd;
|
||||
led_dat->slow = template->slow;
|
||||
led_dat->modval = template->modval;
|
||||
led_dat->num_modes = template->num_modes;
|
||||
|
||||
ret = ns2_led_get_mode(led_dat, &mode);
|
||||
if (ret < 0)
|
||||
|
|
@ -259,9 +235,8 @@ ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
|
|||
{
|
||||
struct device_node *np = dev->of_node;
|
||||
struct device_node *child;
|
||||
struct ns2_led *leds;
|
||||
struct ns2_led *led, *leds;
|
||||
int num_leds = 0;
|
||||
int i = 0;
|
||||
|
||||
num_leds = of_get_child_count(np);
|
||||
if (!num_leds)
|
||||
|
|
@ -272,26 +247,57 @@ ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
|
|||
if (!leds)
|
||||
return -ENOMEM;
|
||||
|
||||
led = leds;
|
||||
for_each_child_of_node(np, child) {
|
||||
const char *string;
|
||||
int ret;
|
||||
int ret, i, num_modes;
|
||||
struct ns2_led_modval *modval;
|
||||
|
||||
ret = of_get_named_gpio(child, "cmd-gpio", 0);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
leds[i].cmd = ret;
|
||||
led->cmd = ret;
|
||||
ret = of_get_named_gpio(child, "slow-gpio", 0);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
leds[i].slow = ret;
|
||||
led->slow = ret;
|
||||
ret = of_property_read_string(child, "label", &string);
|
||||
leds[i].name = (ret == 0) ? string : child->name;
|
||||
led->name = (ret == 0) ? string : child->name;
|
||||
ret = of_property_read_string(child, "linux,default-trigger",
|
||||
&string);
|
||||
if (ret == 0)
|
||||
leds[i].default_trigger = string;
|
||||
led->default_trigger = string;
|
||||
|
||||
i++;
|
||||
ret = of_property_count_u32_elems(child, "modes-map");
|
||||
if (ret < 0 || ret % 3) {
|
||||
dev_err(dev,
|
||||
"Missing or malformed modes-map property\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
num_modes = ret / 3;
|
||||
modval = devm_kzalloc(dev,
|
||||
num_modes * sizeof(struct ns2_led_modval),
|
||||
GFP_KERNEL);
|
||||
if (!modval)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < num_modes; i++) {
|
||||
of_property_read_u32_index(child,
|
||||
"modes-map", 3 * i,
|
||||
(u32 *) &modval[i].mode);
|
||||
of_property_read_u32_index(child,
|
||||
"modes-map", 3 * i + 1,
|
||||
(u32 *) &modval[i].cmd_level);
|
||||
of_property_read_u32_index(child,
|
||||
"modes-map", 3 * i + 2,
|
||||
(u32 *) &modval[i].slow_level);
|
||||
}
|
||||
|
||||
led->num_modes = num_modes;
|
||||
led->modval = modval;
|
||||
|
||||
led++;
|
||||
}
|
||||
|
||||
pdata->leds = leds;
|
||||
|
|
|
|||
Loading…
Reference in a new issue