diff --git a/qcom/sa8155-adp-common.dtsi b/qcom/sa8155-adp-common.dtsi index b7e203419cc2..431edd4ef15f 100644 --- a/qcom/sa8155-adp-common.dtsi +++ b/qcom/sa8155-adp-common.dtsi @@ -3,6 +3,10 @@ #include "sa8155-pmic-overlay.dtsi" +&qupv3_3 { + status = "ok"; +}; + &ufsphy_mem { compatible = "qcom,ufs-phy-qmp-v4"; @@ -27,3 +31,29 @@ status = "ok"; }; + +&pcie1 { + qcom,boot-option = <0x0>; +}; + +&sdhc_2 { + vdd-supply = <&pm8150_1_l17>; + qcom,vdd-voltage-level = <2950000 2960000>; + qcom,vdd-current-level = <200 800000>; + + vdd-io-supply = <&pm8150_2_l13>; + qcom,vdd-io-voltage-level = <1808000 2960000>; + qcom,vdd-io-current-level = <200 22000>; + + pinctrl-names = "default", "sleep"; + + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + cd-gpios = <&pm8150_1_gpios 4 GPIO_ACTIVE_LOW>; + + status = "ok"; +}; + +&qupv3_se12_2uart { + status = "ok"; +}; diff --git a/qcom/sa8155-v2.dtsi b/qcom/sa8155-v2.dtsi index f995a319af99..8862fd543d7f 100644 --- a/qcom/sa8155-v2.dtsi +++ b/qcom/sa8155-v2.dtsi @@ -7,6 +7,254 @@ qcom,msm-id = <362 0x20000>; }; +&pcie0 { + qcom,pcie-phy-ver = <2114>; + + qcom,phy-sequence = <0x0840 0x03 0x0 + 0x0094 0x08 0x0 + 0x0154 0x34 0x0 + 0x016c 0x08 0x0 + 0x0058 0x0f 0x0 + 0x00a4 0x42 0x0 + 0x0110 0x24 0x0 + 0x011c 0x03 0x0 + 0x0118 0xb4 0x0 + 0x010c 0x02 0x0 + 0x01bc 0x11 0x0 + 0x00bc 0x82 0x0 + 0x00d4 0x03 0x0 + 0x00d0 0x55 0x0 + 0x00cc 0x55 0x0 + 0x00b0 0x1a 0x0 + 0x00ac 0x0a 0x0 + 0x00c4 0x68 0x0 + 0x00e0 0x02 0x0 + 0x00dc 0xaa 0x0 + 0x00d8 0xab 0x0 + 0x00b8 0x34 0x0 + 0x00b4 0x14 0x0 + 0x0158 0x01 0x0 + 0x0074 0x06 0x0 + 0x007c 0x16 0x0 + 0x0084 0x36 0x0 + 0x0078 0x06 0x0 + 0x0080 0x16 0x0 + 0x0088 0x36 0x0 + 0x01b0 0x1e 0x0 + 0x01ac 0xb9 0x0 + 0x01b8 0x18 0x0 + 0x01b4 0x94 0x0 + 0x0050 0x07 0x0 + 0x0010 0x00 0x0 + 0x001c 0x31 0x0 + 0x0020 0x01 0x0 + 0x0024 0xde 0x0 + 0x0028 0x07 0x0 + 0x0030 0x4c 0x0 + 0x0034 0x06 0x0 + 0x029c 0x12 0x0 + 0x0284 0x35 0x0 + 0x0288 0x82 0x0 + 0x023c 0x11 0x0 + 0x051c 0x03 0x0 + 0x0518 0x1c 0x0 + 0x0524 0x1e 0x0 + 0x04e8 0x00 0x0 + 0x04ec 0x0e 0x0 + 0x04f0 0x4a 0x0 + 0x04f4 0x0f 0x0 + 0x05b4 0x04 0x0 + 0x0434 0x7f 0x0 + 0x0444 0x70 0x0 + 0x0510 0x17 0x0 + 0x04d4 0x04 0x0 + 0x04d8 0x07 0x0 + 0x0598 0xd4 0x0 + 0x059c 0x54 0x0 + 0x05a0 0xdb 0x0 + 0x05a4 0x3b 0x0 + 0x05a8 0x31 0x0 + 0x0584 0x24 0x0 + 0x0588 0xe4 0x0 + 0x058c 0xec 0x0 + 0x0590 0x3b 0x0 + 0x0594 0x36 0x0 + 0x0570 0xff 0x0 + 0x0574 0xff 0x0 + 0x0578 0xff 0x0 + 0x057c 0x7f 0x0 + 0x0580 0x66 0x0 + 0x04fc 0x00 0x0 + 0x04f8 0xc0 0x0 + 0x0460 0x30 0x0 + 0x0464 0x00 0x0 + 0x05bc 0x0c 0x0 + 0x04dc 0x0d 0x0 + 0x0408 0x0c 0x0 + 0x0414 0x03 0x0 + 0x09a4 0x01 0x0 + 0x0c90 0x00 0x0 + 0x0c40 0x01 0x0 + 0x0c48 0x01 0x0 + 0x0c50 0x00 0x0 + 0x0cb4 0x33 0x0 + 0x0cbc 0x00 0x0 + 0x0ce0 0x58 0x0 + 0x0ca4 0x0f 0x0 + 0x0048 0x90 0x0 + 0x0c1c 0xc1 0x0 + 0x0988 0x88 0x0 + 0x0998 0x0b 0x0 + 0x08dc 0x0d 0x0 + 0x09ec 0x12 0x0 + 0x0800 0x00 0x0 + 0x0844 0x03 0x0>; +}; + +&pcie1 { + qcom,pcie-phy-ver = <2111>; + + qcom,phy-sequence = <0x0a40 0x03 0x0 + 0x0010 0x00 0x0 + 0x001c 0x31 0x0 + 0x0020 0x01 0x0 + 0x0024 0xde 0x0 + 0x0028 0x07 0x0 + 0x0030 0x4c 0x0 + 0x0034 0x06 0x0 + 0x0048 0x90 0x0 + 0x0058 0x0f 0x0 + 0x0074 0x06 0x0 + 0x0078 0x06 0x0 + 0x007c 0x16 0x0 + 0x0080 0x16 0x0 + 0x0084 0x36 0x0 + 0x0088 0x36 0x0 + 0x0094 0x08 0x0 + 0x00a4 0x42 0x0 + 0x00ac 0x0a 0x0 + 0x00b0 0x1a 0x0 + 0x00b4 0x14 0x0 + 0x00b8 0x34 0x0 + 0x00bc 0x82 0x0 + 0x00c4 0x68 0x0 + 0x00cc 0x55 0x0 + 0x00d0 0x55 0x0 + 0x00d4 0x03 0x0 + 0x00d8 0xab 0x0 + 0x00dc 0xaa 0x0 + 0x00e0 0x02 0x0 + 0x010c 0x02 0x0 + 0x0110 0x24 0x0 + 0x0118 0xb4 0x0 + 0x011c 0x03 0x0 + 0x0154 0x34 0x0 + 0x0158 0x01 0x0 + 0x016c 0x08 0x0 + 0x01ac 0xb9 0x0 + 0x01b0 0x1e 0x0 + 0x01b4 0x94 0x0 + 0x01b8 0x18 0x0 + 0x01bc 0x11 0x0 + 0x023c 0x11 0x0 + 0x0284 0x35 0x0 + 0x0288 0x82 0x0 + 0x029c 0x12 0x0 + 0x0304 0x02 0x0 + 0x0408 0x0c 0x0 + 0x0414 0x03 0x0 + 0x0434 0x7f 0x0 + 0x0444 0x70 0x0 + 0x0460 0x30 0x0 + 0x0464 0x00 0x0 + 0x04d4 0x04 0x0 + 0x04d8 0x07 0x0 + 0x04dc 0x0d 0x0 + 0x04e8 0x00 0x0 + 0x04ec 0x0e 0x0 + 0x04f0 0x4a 0x0 + 0x04f4 0x0f 0x0 + 0x04f8 0xc0 0x0 + 0x04fc 0x00 0x0 + 0x0510 0x17 0x0 + 0x0518 0x1c 0x0 + 0x051c 0x03 0x0 + 0x0524 0x1e 0x0 + 0x0570 0xff 0x0 + 0x0574 0xff 0x0 + 0x0578 0xff 0x0 + 0x057c 0x7f 0x0 + 0x0580 0x66 0x0 + 0x0584 0x24 0x0 + 0x0588 0xe4 0x0 + 0x058c 0xec 0x0 + 0x0590 0x3b 0x0 + 0x0594 0x36 0x0 + 0x0598 0xd4 0x0 + 0x059c 0x54 0x0 + 0x05a0 0xdb 0x0 + 0x05a4 0x3b 0x0 + 0x05a8 0x31 0x0 + 0x05bc 0x0c 0x0 + 0x063c 0x11 0x0 + 0x0684 0x35 0x0 + 0x0688 0x82 0x0 + 0x069c 0x12 0x0 + 0x0704 0x20 0x0 + 0x0808 0x0c 0x0 + 0x0814 0x03 0x0 + 0x0834 0x7f 0x0 + 0x0844 0x70 0x0 + 0x0860 0x30 0x0 + 0x0864 0x00 0x0 + 0x08d4 0x04 0x0 + 0x08d8 0x07 0x0 + 0x08dc 0x0d 0x0 + 0x08e8 0x00 0x0 + 0x08ec 0x0e 0x0 + 0x08f0 0x4a 0x0 + 0x08f4 0x0f 0x0 + 0x08f8 0xc0 0x0 + 0x08fc 0x00 0x0 + 0x0910 0x17 0x0 + 0x0918 0x1c 0x0 + 0x091c 0x03 0x0 + 0x0924 0x1e 0x0 + 0x0970 0xff 0x0 + 0x0974 0xff 0x0 + 0x0978 0xff 0x0 + 0x097c 0x7f 0x0 + 0x0980 0x66 0x0 + 0x0984 0x24 0x0 + 0x0988 0xe4 0x0 + 0x098c 0xec 0x0 + 0x0990 0x3b 0x0 + 0x0994 0x36 0x0 + 0x0998 0xd4 0x0 + 0x099c 0x54 0x0 + 0x09a0 0xdb 0x0 + 0x09a4 0x3b 0x0 + 0x09a8 0x31 0x0 + 0x09bc 0x0c 0x0 + 0x0adc 0x05 0x0 + 0x0b88 0x88 0x0 + 0x0b98 0x0b 0x0 + 0x0ba4 0x01 0x0 + 0x0bec 0x12 0x0 + 0x0e0c 0x0d 0x0 + 0x0e14 0x07 0x0 + 0x0e1c 0xc1 0x0 + 0x0e40 0x01 0x0 + 0x0e48 0x01 0x0 + 0x0e90 0x00 0x0 + 0x0eb4 0x33 0x0 + 0x0ebc 0x00 0x0 + 0x0ee0 0x58 0x0 + 0x0ea4 0x0f 0x0 + 0x0a00 0x00 0x0 + 0x0a44 0x03 0x0>; +}; + &scc { compatible = "qcom,sa8155-scc-v2", "syscon"; }; diff --git a/qcom/sa8155.dtsi b/qcom/sa8155.dtsi index 8f7a349e5ad9..bfc7cfe41273 100644 --- a/qcom/sa8155.dtsi +++ b/qcom/sa8155.dtsi @@ -53,9 +53,41 @@ status = "ok"; }; +&usb2_phy0 { + vdd-supply = <&pm8150_1_l5>; + vdda18-supply = <&pm8150_1_l12>; + vdda33-supply = <&pm8150_1_l2>; +}; + +&usb2_phy1 { + vdd-supply = <&pm8150_1_l5>; + vdda18-supply = <&pm8150_1_l12>; + vdda33-supply = <&pm8150_1_l2>; +}; + +&usb_qmp_phy { + vdd-supply = <&pm8150_1_l5>; + core-supply = <&pm8150_2_l8>; +}; + /* Add regulator nodes specific to SA8155 */ #include "sa8155-regulator.dtsi" +&pcie0 { + vreg-1p8-supply = <&pm8150_2_l8>; + vreg-0p9-supply = <&pm8150_2_l18>; + qcom,no-l1-supported; + qcom,no-l1ss-supported; + qcom,no-aux-clk-sync; + qcom,core-preset = <0x77777777>; +}; + +&pcie1 { + vreg-1p8-supply = <&pm8150_2_l8>; + vreg-0p9-supply = <&pm8150_2_l18>; + qcom,core-preset = <0x77777777>; +}; + &gpucc { compatible = "qcom,sa8155-gpucc", "syscon"; }; diff --git a/qcom/sm8150-pcie.dtsi b/qcom/sm8150-pcie.dtsi new file mode 100644 index 000000000000..7547335577bb --- /dev/null +++ b/qcom/sm8150-pcie.dtsi @@ -0,0 +1,593 @@ +#include + +&soc { + pcie0: qcom,pcie@1c00000 { + compatible = "qcom,pci-msm"; + cell-index = <0>; + + reg = <0x1c00000 0x4000>, + <0x1c04000 0x1000>, + <0x60000000 0xf1d>, + <0x60000f20 0xa8>, + <0x60001000 0x1000>, + <0x60100000 0x100000>, + <0x60200000 0x100000>, + <0x60300000 0x3d00000>; + + reg-names = "parf", "phy", "dm_core", "elbi", + "iatu", "conf", "io", "bars"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x60200000 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x60300000 0x0 0x3d00000>; + interrupt-parent = <&pcie0>; + interrupts = <0 1 2 3 4>; + interrupt-names = "int_global_int", "int_a", "int_b", "int_c", + "int_d"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0xffffffff>; + interrupt-map = < 0 0 0 0 &intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH + 0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + qcom,phy-sequence = <0x0840 0x03 0x0 + 0x0094 0x08 0x0 + 0x0154 0x34 0x0 + 0x016c 0x08 0x0 + 0x0058 0x0f 0x0 + 0x00a4 0x42 0x0 + 0x0110 0x24 0x0 + 0x011c 0x03 0x0 + 0x0118 0xb4 0x0 + 0x010c 0x02 0x0 + 0x01bc 0x11 0x0 + 0x00bc 0x82 0x0 + 0x00d4 0x03 0x0 + 0x00d0 0x55 0x0 + 0x00cc 0x55 0x0 + 0x00b0 0x1a 0x0 + 0x00ac 0x0a 0x0 + 0x00c4 0x68 0x0 + 0x00e0 0x02 0x0 + 0x00dc 0xaa 0x0 + 0x00d8 0xab 0x0 + 0x00b8 0x34 0x0 + 0x00b4 0x14 0x0 + 0x0158 0x01 0x0 + 0x0074 0x06 0x0 + 0x007c 0x16 0x0 + 0x0084 0x36 0x0 + 0x0078 0x06 0x0 + 0x0080 0x16 0x0 + 0x0088 0x36 0x0 + 0x01b0 0x1e 0x0 + 0x01ac 0xb9 0x0 + 0x01b8 0x18 0x0 + 0x01b4 0x94 0x0 + 0x0050 0x07 0x0 + 0x0010 0x00 0x0 + 0x001c 0x31 0x0 + 0x0020 0x01 0x0 + 0x0024 0xde 0x0 + 0x0028 0x07 0x0 + 0x0030 0x4c 0x0 + 0x0034 0x06 0x0 + 0x029c 0x12 0x0 + 0x0284 0x05 0x0 + 0x0c38 0x03 0x0 + 0x0518 0x1c 0x0 + 0x0524 0x14 0x0 + 0x04e8 0x00 0x0 + 0x04ec 0x0e 0x0 + 0x04f0 0x4a 0x0 + 0x04f4 0x0f 0x0 + 0x05b4 0x04 0x0 + 0x0434 0x7f 0x0 + 0x0444 0x70 0x0 + 0x0510 0x17 0x0 + 0x0598 0xd4 0x0 + 0x059c 0x54 0x0 + 0x05a0 0xdb 0x0 + 0x05a4 0x39 0x0 + 0x05a8 0x31 0x0 + 0x0584 0x24 0x0 + 0x0588 0xe4 0x0 + 0x058c 0xec 0x0 + 0x0590 0x39 0x0 + 0x0594 0x37 0x0 + 0x0570 0x7f 0x0 + 0x0574 0xff 0x0 + 0x0578 0xff 0x0 + 0x057c 0xdb 0x0 + 0x0580 0x75 0x0 + 0x04fc 0x00 0x0 + 0x04f8 0xc0 0x0 + 0x0414 0x04 0x0 + 0x09a4 0x01 0x0 + 0x0c90 0x00 0x0 + 0x0c40 0x01 0x0 + 0x0c48 0x01 0x0 + 0x0c50 0x00 0x0 + 0x0048 0x90 0x0 + 0x0c1c 0xc1 0x0 + 0x0988 0x66 0x0 + 0x0998 0x08 0x0 + 0x08dc 0x0d 0x0 + 0x09ec 0x01 0x0 + 0x04b4 0x02 0x0 + 0x04b8 0x02 0x0 + 0x04bc 0xaa 0x0 + 0x04c0 0x00 0x0 + 0x04d4 0x54 0x0 + 0x04d8 0x07 0x0 + 0x0460 0xa0 0x0 + 0x05c4 0x0c 0x0 + 0x0464 0x00 0x0 + 0x05c0 0x10 0x0 + 0x04dc 0x05 0x0 + 0x0408 0x0c 0x0 + 0x0414 0x03 0x0 + 0x0800 0x00 0x0 + 0x0844 0x03 0x0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_clkreq_default + &pcie0_perst_default + &pcie0_wake_default>; + + perst-gpio = <&tlmm 35 0>; + wake-gpio = <&tlmm 37 0>; + + gdsc-vdd-supply = <&pcie_0_gdsc>; + vreg-1p8-supply = <&pm8150l_l3>; + vreg-0p9-supply = <&pm8150_l5>; + vreg-cx-supply = <&VDD_CX_LEVEL>; + + qcom,vreg-1p8-voltage-level = <1200000 1200000 24000>; + qcom,vreg-0p9-voltage-level = <880000 880000 24000>; + qcom,vreg-cx-voltage-level = ; + qcom,bw-scale = ; + + interconnect-names = "icc_path"; + interconnects = <&aggre2_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>; + + msi-parent = <&pcie0_msi>; + + qcom,no-l0s-supported; + + qcom,ep-latency = <10>; + + qcom,slv-addr-space-size = <0x4000000>; + + qcom,phy-status-offset = <0x814>; + qcom,phy-status-bit = <6>; + qcom,phy-power-down-offset = <0x840>; + + qcom,boot-option = <0x1>; + + linux,pci-domain = <0>; + + qcom,pcie-phy-ver = <0x40>; + qcom,use-19p2mhz-aux-clk; + + qcom,smmu-sid-base = <0x1d80>; + + dma-coherent; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>, + <0x200 &apps_smmu 0x1d82 0x1>, + <0x300 &apps_smmu 0x1d83 0x1>, + <0x400 &apps_smmu 0x1d84 0x1>, + <0x500 &apps_smmu 0x1d85 0x1>, + <0x600 &apps_smmu 0x1d86 0x1>, + <0x700 &apps_smmu 0x1d87 0x1>, + <0x800 &apps_smmu 0x1d88 0x1>, + <0x900 &apps_smmu 0x1d89 0x1>, + <0xa00 &apps_smmu 0x1d8a 0x1>, + <0xb00 &apps_smmu 0x1d8b 0x1>, + <0xc00 &apps_smmu 0x1d8c 0x1>, + <0xd00 &apps_smmu 0x1d8d 0x1>, + <0xe00 &apps_smmu 0x1d8e 0x1>, + <0xf00 &apps_smmu 0x1d8f 0x1>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_PHY_AUX_CLK>; + + clock-names = "pcie_0_pipe_clk", "pcie_0_ref_clk_src", + "pcie_0_aux_clk", "pcie_0_cfg_ahb_clk", + "pcie_0_mstr_axi_clk", "pcie_0_slv_axi_clk", + "pcie_0_ldo", "pcie_0_slv_q2a_axi_clk", + "pcie_tbu_clk", "pcie_phy_refgen_clk", + "pcie_phy_aux_clk"; + + max-clock-frequency-hz = <0>, <0>, <19200000>, <0>, <0>, <0>, + <0>, <0>, <0>, <0>, <100000000>, <0>; + + resets = <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_PHY_BCR>; + + reset-names = "pcie_0_core_reset", + "pcie_0_phy_reset"; + + pcie_rc0: pcie_rc0 { + #address-cells = <5>; + #size-cells = <0>; + reg = <0 0 0 0 0>; + pci-ids = "17cb:0108"; + }; + }; + + pcie0_msi: qcom,pcie0_msi@17a00040 { + compatible = "qcom,pci-msi"; + msi-controller; + reg = <0x17a00040 0x0>; + interrupt-parent = <&intc>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pcie1: qcom,pcie@1c08000 { + compatible = "qcom,pci-msm"; + cell-index = <1>; + + reg = <0x1c08000 0x4000>, + <0x1c0c000 0x2000>, + <0x40000000 0xf1d>, + <0x40000f20 0xa8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>, + <0x40200000 0x100000>, + <0x40300000 0x1fd00000>; + + reg-names = "parf", "phy", "dm_core", "elbi", + "iatu", "conf", "io", "bars"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x40200000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x1fd00000>; + interrupt-parent = <&pcie1>; + interrupts = <0 1 2 3 4>; + interrupt-names = "int_global_int", "int_a", "int_b", "int_c", + "int_d"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0xffffffff>; + interrupt-map = <0 0 0 0 &intc GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH + 0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + qcom,phy-sequence = <0x0a40 0x03 0x0 + 0x0010 0x00 0x0 + 0x001c 0x31 0x0 + 0x0020 0x01 0x0 + 0x0024 0xde 0x0 + 0x0028 0x07 0x0 + 0x0030 0x4c 0x0 + 0x0034 0x06 0x0 + 0x0048 0x90 0x0 + 0x0050 0x07 0x0 + 0x0058 0x0f 0x0 + 0x0074 0x06 0x0 + 0x0078 0x06 0x0 + 0x007c 0x16 0x0 + 0x0080 0x16 0x0 + 0x0084 0x36 0x0 + 0x0088 0x36 0x0 + 0x0094 0x08 0x0 + 0x00a4 0x42 0x0 + 0x00ac 0x0a 0x0 + 0x00b0 0x1a 0x0 + 0x00b4 0x14 0x0 + 0x00b8 0x34 0x0 + 0x00bc 0x82 0x0 + 0x00c4 0x68 0x0 + 0x00cc 0x55 0x0 + 0x00d0 0x55 0x0 + 0x00d4 0x03 0x0 + 0x00d8 0xab 0x0 + 0x00dc 0xaa 0x0 + 0x00e0 0x02 0x0 + 0x010c 0x02 0x0 + 0x0110 0x24 0x0 + 0x0118 0xb4 0x0 + 0x011c 0x03 0x0 + 0x0154 0x32 0x0 + 0x0158 0x01 0x0 + 0x016c 0x08 0x0 + 0x01ac 0xb9 0x0 + 0x01b0 0x1e 0x0 + 0x01b4 0x94 0x0 + 0x01b8 0x18 0x0 + 0x01bc 0x01 0x0 + 0x0284 0x05 0x0 + 0x029c 0x12 0x0 + 0x0408 0x0c 0x0 + 0x0414 0x03 0x0 + 0x0434 0x7f 0x0 + 0x0444 0x70 0x0 + 0x04d8 0x01 0x0 + 0x04e8 0x00 0x0 + 0x04ec 0x0e 0x0 + 0x04f0 0x4a 0x0 + 0x04f4 0x0f 0x0 + 0x04f8 0xc0 0x0 + 0x04fc 0x00 0x0 + 0x0510 0x17 0x0 + 0x0518 0x1c 0x0 + 0x051c 0x03 0x0 + 0x0524 0x14 0x0 + 0x0570 0x7f 0x0 + 0x0574 0xff 0x0 + 0x0578 0xff 0x0 + 0x057c 0xdb 0x0 + 0x0580 0x75 0x0 + 0x0584 0x24 0x0 + 0x0588 0xe4 0x0 + 0x058c 0xec 0x0 + 0x0590 0x39 0x0 + 0x0594 0x36 0x0 + 0x0598 0xd4 0x0 + 0x059c 0x54 0x0 + 0x05a0 0xdb 0x0 + 0x05a4 0x39 0x0 + 0x05a8 0x31 0x0 + 0x05b4 0x04 0x0 + 0x04b4 0x02 0x0 + 0x04b8 0x02 0x0 + 0x04bc 0xaa 0x0 + 0x04c0 0x00 0x0 + 0x04d4 0x54 0x0 + 0x04d8 0x07 0x0 + 0x0460 0xa0 0x0 + 0x05c4 0x0c 0x0 + 0x0464 0x00 0x0 + 0x05c0 0x10 0x0 + 0x04dc 0x05 0x0 + 0x0684 0x05 0x0 + 0x069c 0x12 0x0 + 0x0808 0x0c 0x0 + 0x0814 0x03 0x0 + 0x0834 0x7f 0x0 + 0x0844 0x70 0x0 + 0x08d8 0x01 0x0 + 0x08e8 0x00 0x0 + 0x08ec 0x0e 0x0 + 0x08f0 0x4a 0x0 + 0x08f4 0x0f 0x0 + 0x08f8 0xc0 0x0 + 0x08fc 0x00 0x0 + 0x0910 0x17 0x0 + 0x0918 0x1c 0x0 + 0x091c 0x03 0x0 + 0x0924 0x14 0x0 + 0x0970 0x7f 0x0 + 0x0974 0xff 0x0 + 0x0978 0xff 0x0 + 0x097c 0xdb 0x0 + 0x0980 0x75 0x0 + 0x0984 0x24 0x0 + 0x0988 0xe4 0x0 + 0x098c 0xec 0x0 + 0x0990 0x3a 0x0 + 0x0994 0x36 0x0 + 0x0998 0xd4 0x0 + 0x099c 0x54 0x0 + 0x09a0 0xdb 0x0 + 0x09a4 0x39 0x0 + 0x09a8 0x31 0x0 + 0x09b4 0x04 0x0 + 0x08b4 0x02 0x0 + 0x08b8 0x02 0x0 + 0x08bc 0xaa 0x0 + 0x08c0 0x00 0x0 + 0x08d4 0x54 0x0 + 0x08d8 0x07 0x0 + 0x0860 0xa0 0x0 + 0x09c4 0x0c 0x0 + 0x0864 0x00 0x0 + 0x09c0 0x10 0x0 + 0x08dc 0x05 0x0 + 0x0a98 0x01 0x0 + 0x0abc 0x56 0x0 + 0x0adc 0x0d 0x0 + 0x0b88 0x66 0x0 + 0x0ba4 0x01 0x0 + 0x0b98 0x08 0x0 + 0x0e14 0x07 0x0 + 0x0e1c 0xc1 0x0 + 0x0e40 0x01 0x0 + 0x0e48 0x01 0x0 + 0x0e78 0x50 0x0 + 0x0e90 0x00 0x0 + 0x0ea0 0x11 0x0 + 0x0e38 0x03 0x0 + 0x0e50 0x00 0x0 + 0x0e20 0x01 0x0 + 0x0a00 0x00 0x0 + 0x0a44 0x03 0x0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_default + &pcie1_perst_default + &pcie1_wake_default>; + + perst-gpio = <&tlmm 102 0>; + wake-gpio = <&tlmm 104 0>; + + gdsc-vdd-supply = <&pcie_1_gdsc>; + vreg-1p8-supply = <&pm8150l_l3>; + vreg-0p9-supply = <&pm8150_l5>; + vreg-cx-supply = <&VDD_CX_LEVEL>; + + qcom,vreg-1p8-voltage-level = <1200000 1200000 24000>; + qcom,vreg-0p9-voltage-level = <880000 880000 24000>; + qcom,vreg-cx-voltage-level = ; + qcom,bw-scale = ; + + interconnect-names = "icc_path"; + interconnects = <&aggre2_noc MASTER_PCIE_1 &mc_virt SLAVE_EBI1>; + + msi-parent = <&pcie1_msi>; + + qcom,no-l0s-supported; + + qcom,ep-latency = <10>; + + qcom,slv-addr-space-size = <0x20000000>; + + qcom,phy-status-offset = <0xa14>; + qcom,phy-status-bit = <6>; + qcom,phy-power-down-offset = <0xa40>; + + qcom,boot-option = <0x1>; + + linux,pci-domain = <1>; + + qcom,pcie-phy-ver = <0x40>; + qcom,use-19p2mhz-aux-clk; + + qcom,smmu-sid-base = <0x1e00>; + + dma-coherent; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>, + <0x200 &apps_smmu 0x1e02 0x1>, + <0x300 &apps_smmu 0x1e03 0x1>, + <0x400 &apps_smmu 0x1e04 0x1>, + <0x500 &apps_smmu 0x1e05 0x1>, + <0x600 &apps_smmu 0x1e06 0x1>, + <0x700 &apps_smmu 0x1e07 0x1>, + <0x800 &apps_smmu 0x1e08 0x1>, + <0x900 &apps_smmu 0x1e09 0x1>, + <0xa00 &apps_smmu 0x1e0a 0x1>, + <0xb00 &apps_smmu 0x1e0b 0x1>, + <0xc00 &apps_smmu 0x1e0c 0x1>, + <0xd00 &apps_smmu 0x1e0d 0x1>, + <0xe00 &apps_smmu 0x1e0e 0x1>, + <0xf00 &apps_smmu 0x1e0f 0x1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_PHY_AUX_CLK>; + + clock-names = "pcie_1_pipe_clk", "pcie_1_ref_clk_src", + "pcie_1_aux_clk", "pcie_1_cfg_ahb_clk", + "pcie_1_mstr_axi_clk", "pcie_1_slv_axi_clk", + "pcie_1_ldo", "pcie_1_slv_q2a_axi_clk", + "pcie_tbu_clk", "pcie_phy_refgen_clk", + "pcie_phy_aux_clk"; + + max-clock-frequency-hz = <0>, <0>, <19200000>, <0>, <0>, <0>, + <0>, <0>, <0>, <0>, <100000000>, <0>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_PHY_BCR>; + + reset-names = "pcie_1_core_reset", + "pcie_1_phy_reset"; + + pcie_rc1: pcie_rc1 { + #address-cells = <5>; + #size-cells = <0>; + reg = <0 0 0 0 0>; + pci-ids = "17cb:0108"; + }; + }; + + pcie1_msi: qcom,pcie1_msi@17a00040 { + compatible = "qcom,pci-msi"; + msi-controller; + reg = <0x17a00040 0x0>; + interrupt-parent = <&intc>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; +}; diff --git a/qcom/sm8150-pinctrl.dtsi b/qcom/sm8150-pinctrl.dtsi index d1db3b16af65..e5391f4ffef5 100644 --- a/qcom/sm8150-pinctrl.dtsi +++ b/qcom/sm8150-pinctrl.dtsi @@ -68,160 +68,55 @@ }; }; - storage_cd: storage_cd { - mux { - pins = "gpio96"; - function = "gpio"; + sdc2_on: sdc2_on { + clk { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <16>; /* 16 MA */ }; - config { + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd { pins = "gpio96"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; }; - sdc2_clk_on: sdc2_clk_on { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { + sdc2_off: sdc2_off { + clk { pins = "sdc2_clk"; bias-disable; /* NO pull */ drive-strength = <2>; /* 2 MA */ }; - }; - sdc2_clk_ds_400KHz: sdc2_clk_ds_400KHz { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_clk_ds_50MHz: sdc2_clk_ds_50MHz { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_clk_ds_100MHz: sdc2_clk_ds_100MHz { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_clk_ds_200MHz: sdc2_clk_ds_200MHz { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cmd_on: sdc2_cmd_on { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { + cmd { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - }; - sdc2_cmd_ds_400KHz: sdc2_cmd_ds_400KHz { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cmd_ds_50MHz: sdc2_cmd_ds_50MHz { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cmd_ds_100MHz: sdc2_cmd_ds_100MHz { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cmd_ds_200MHz: sdc2_cmd_ds_200MHz { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_data_on: sdc2_data_on { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_data_off: sdc2_data_off { - config { + data { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - }; - sdc2_data_ds_400KHz: sdc2_data_ds_400KHz { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_data_ds_50MHz: sdc2_data_ds_50MHz { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_data_ds_100MHz: sdc2_data_ds_100MHz { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_data_ds_200MHz: sdc2_data_ds_200MHz { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ + sd-cd { + pins = "gpio96"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ }; }; diff --git a/qcom/sm8150-qupv3.dtsi b/qcom/sm8150-qupv3.dtsi new file mode 100644 index 000000000000..1dbbcbf1bde8 --- /dev/null +++ b/qcom/sm8150-qupv3.dtsi @@ -0,0 +1,829 @@ +#include +#include + +&soc { + /* QUPv3 South Instances + * South 0 : SE 0 + * South 1 : SE 1 + * South 2 : SE 2 + * South 3 : SE 3 + * South 4 : SE 4 + * South 5 : SE 5 + * South 6 : SE 6 + * South 7 : SE 7 + * + * QUPv3 North & East Instances + * North 0 : SE 8 + * North 1 : SE 9 + * North 2 : SE 10 + * North 3 : SE 11 + * North 4 : SE 12 + * North 5 : SE 16 + * East 0 : SE 17 + * East 1 : SE 18 + * East 2 : SE 19 + * East 3 : SE 13 + * East 4 : SE 14 + * East 5 : SE 15 + */ + qupv3_0: qcom,qupv3_0_geni_se@8c0000 { + compatible = "qcom,qupv3-geni-se"; + reg = <0x8c0000 0x6000>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-bus-ids = + ; + iommus = <&apps_smmu 0xc3 0x0>; + qcom,iommu-dma = "fastmap"; + status = "ok"; + }; + + /* I2C */ + qupv3_se0_i2c: i2c@880000 { + compatible = "qcom,i2c-geni"; + reg = <0x880000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se0_i2c_active>; + pinctrl-1 = <&qupv3_se0_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se1_i2c: i2c@884000 { + compatible = "qcom,i2c-geni"; + reg = <0x884000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se1_i2c_active>; + pinctrl-1 = <&qupv3_se1_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se2_i2c: i2c@888000 { + compatible = "qcom,i2c-geni"; + reg = <0x888000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se2_i2c_active>; + pinctrl-1 = <&qupv3_se2_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se3_i2c: i2c@88c000 { + compatible = "qcom,i2c-geni"; + reg = <0x88c000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se3_i2c_active>; + pinctrl-1 = <&qupv3_se3_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se4_i2c: i2c@890000 { + compatible = "qcom,i2c-geni"; + reg = <0x890000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se4_i2c_active>; + pinctrl-1 = <&qupv3_se4_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se5_i2c: i2c@894000 { + compatible = "qcom,i2c-geni"; + reg = <0x894000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se5_i2c_active>; + pinctrl-1 = <&qupv3_se5_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se6_i2c: i2c@898000 { + compatible = "qcom,i2c-geni"; + reg = <0x898000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se6_i2c_active>; + pinctrl-1 = <&qupv3_se6_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se7_i2c: i2c@89c000 { + compatible = "qcom,i2c-geni"; + reg = <0x89c000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se7_i2c_active>; + pinctrl-1 = <&qupv3_se7_i2c_sleep>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + /* SPI */ + qupv3_se0_spi: spi@880000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x880000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se0_spi_active>; + pinctrl-1 = <&qupv3_se0_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se1_spi: spi@884000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x884000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se1_spi_active>; + pinctrl-1 = <&qupv3_se1_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se2_spi: spi@888000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x888000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se2_spi_active>; + pinctrl-1 = <&qupv3_se2_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se3_spi: spi@88c000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x88c000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se3_spi_active>; + pinctrl-1 = <&qupv3_se3_spi_sleep &qupv3_se3_spi_miso_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se4_spi: spi@890000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x890000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se4_spi_active>; + pinctrl-1 = <&qupv3_se4_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se5_spi: spi@894000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x894000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se5_spi_active>; + pinctrl-1 = <&qupv3_se5_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se6_spi: spi@898000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x898000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se6_spi_active>; + pinctrl-1 = <&qupv3_se6_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_se7_spi: spi@89c000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x89c000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>, + <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se7_spi_active>; + pinctrl-1 = <&qupv3_se7_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_0>; + status = "disabled"; + }; + + qupv3_1: qcom,qupv3_1_geni_se@ac0000 { + compatible = "qcom,qupv3-geni-se"; + reg = <0xac0000 0x6000>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-bus-ids = + ; + iommus = <&apps_smmu 0x603 0x0>; + qcom,iommu-dma = "fastmap"; + status = "ok"; + }; + + /* Debug UART Instance for CDP/MTP platform */ + qupv3_se12_2uart: qcom,qup_uart@0xa90000 { + compatible = "qcom,msm-geni-console"; + reg = <0xa90000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se12_2uart_active>; + pinctrl-1 = <&qupv3_se12_2uart_sleep>; + interrupts = ; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + /* 4-wire UART */ + qupv3_se13_4uart: qcom,qup_uart@0xc8c000 { + compatible = "qcom,msm-geni-serial-hs"; + reg = <0xc8c000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "active", "sleep"; + pinctrl-0 = <&qupv3_se13_default_ctsrtsrx>, + <&qupv3_se13_default_tx>; + pinctrl-1 = <&qupv3_se13_ctsrx>, <&qupv3_se13_rts>, + <&qupv3_se13_tx>; + pinctrl-2 = <&qupv3_se13_ctsrx>, <&qupv3_se13_rts>, + <&qupv3_se13_tx>; + interrupts-extended = <&intc GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 46 0>; + qcom,wrapper-core = <&qupv3_2>; + qcom,wakeup-byte = <0xFD>; + status = "disabled"; + }; + + /* I2C */ + qupv3_se8_i2c: i2c@a80000 { + compatible = "qcom,i2c-geni"; + reg = <0xa80000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se8_i2c_active>; + pinctrl-1 = <&qupv3_se8_i2c_sleep>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se9_i2c: i2c@a84000 { + compatible = "qcom,i2c-geni"; + reg = <0xa84000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se9_i2c_active>; + pinctrl-1 = <&qupv3_se9_i2c_sleep>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se10_i2c: i2c@a88000 { + compatible = "qcom,i2c-geni"; + reg = <0xa88000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se10_i2c_active>; + pinctrl-1 = <&qupv3_se10_i2c_sleep>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se11_i2c: i2c@a8c000 { + compatible = "qcom,i2c-geni"; + reg = <0xa8c000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se11_i2c_active>; + pinctrl-1 = <&qupv3_se11_i2c_sleep>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se12_i2c: i2c@a90000 { + compatible = "qcom,i2c-geni"; + reg = <0xa90000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se12_i2c_active>; + pinctrl-1 = <&qupv3_se12_i2c_sleep>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + /* SPI */ + qupv3_se8_spi: spi@a80000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa80000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se8_spi_active>; + pinctrl-1 = <&qupv3_se8_spi_active>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se9_spi: spi@a84000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa84000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se9_spi_active>; + pinctrl-1 = <&qupv3_se9_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se10_spi: spi@a88000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa88000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se10_spi_active>; + pinctrl-1 = <&qupv3_se10_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se11_spi: spi@a8c000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa8c000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se11_spi_active>; + pinctrl-1 = <&qupv3_se11_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se12_spi: spi@a90000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa90000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se12_spi_active>; + pinctrl-1 = <&qupv3_se12_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + /* QUPv3 East Instances */ + qupv3_2: qcom,qupv3_2_geni_se@cc0000 { + compatible = "qcom,qupv3-geni-se"; + reg = <0xcc0000 0x6000>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-bus-ids = + ; + iommus = <&apps_smmu 0x7a3 0x0>; + qcom,iommu-dma = "fastmap"; + status = "ok"; + }; + + /* I2C */ + qupv3_se13_i2c: i2c@c8c000 { + compatible = "qcom,i2c-geni"; + reg = <0xc8c000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se13_i2c_active>; + pinctrl-1 = <&qupv3_se13_i2c_sleep>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se14_i2c: i2c@0xc90000 { + compatible = "qcom,i2c-geni"; + reg = <0xc90000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se14_i2c_active>; + pinctrl-1 = <&qupv3_se14_i2c_sleep>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se15_i2c: i2c@0xc94000 { + compatible = "qcom,i2c-geni"; + reg = <0xc94000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se15_i2c_active>; + pinctrl-1 = <&qupv3_se15_i2c_sleep>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se16_i2c: i2c@0xa94000 { + compatible = "qcom,i2c-geni"; + reg = <0xa94000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se16_i2c_active>; + pinctrl-1 = <&qupv3_se16_i2c_sleep>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se17_i2c: i2c@0xc80000 { + compatible = "qcom,i2c-geni"; + reg = <0xc80000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se17_i2c_active>; + pinctrl-1 = <&qupv3_se17_i2c_sleep>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se18_i2c: i2c@0xc84000 { + compatible = "qcom,i2c-geni"; + reg = <0xc84000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se18_i2c_active>; + pinctrl-1 = <&qupv3_se18_i2c_sleep>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se19_i2c: i2c@0xc88000 { + compatible = "qcom,i2c-geni"; + reg = <0xc88000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se19_i2c_active>; + pinctrl-1 = <&qupv3_se19_i2c_sleep>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + /* SPI */ + qupv3_se13_spi: spi@c8c000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc8c000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se13_spi_active>; + pinctrl-1 = <&qupv3_se13_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se14_spi: spi@c90000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc90000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se14_spi_active>; + pinctrl-1 = <&qupv3_se14_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se15_spi: spi@c94000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc94000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se15_spi_active>; + pinctrl-1 = <&qupv3_se15_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se16_spi: spi@a94000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa94000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se16_spi_active>; + pinctrl-1 = <&qupv3_se16_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_1>; + status = "disabled"; + }; + + qupv3_se17_spi: spi@c80000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc80000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se17_spi_active>; + pinctrl-1 = <&qupv3_se17_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se18_spi: spi@c84000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc84000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se18_spi_active>; + pinctrl-1 = <&qupv3_se18_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + + qupv3_se19_spi: spi@c88000 { + compatible = "qcom,spi-geni"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc88000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>, + <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se19_spi_active>; + pinctrl-1 = <&qupv3_se19_spi_sleep>; + interrupts = ; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_2>; + status = "disabled"; + }; + +}; diff --git a/qcom/sm8150-ssc-qupv3.dtsi b/qcom/sm8150-ssc-qupv3.dtsi new file mode 100644 index 000000000000..33183503124e --- /dev/null +++ b/qcom/sm8150-ssc-qupv3.dtsi @@ -0,0 +1,109 @@ +#include +#include + +&soc { + /* QUPv3 SSC Instance */ + qupv3_3: qcom,qupv3_3_geni_se@26c0000 { + compatible = "qcom,qupv3-geni-se"; + reg = <0x26c0000 0x6000>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-bus-ids = + ; + iommus = <&apps_smmu 0x4e3 0x0>; + qcom,iommu-dma = "fastmap"; + status = "disabled"; + }; + + /* I2C*/ + qupv3_se20_i2c: i2c@2680000 { + compatible = "qcom,i2c-geni"; + reg = <0x2680000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&scc SCC_QUPV3_SE0_CLK>, + <&scc SCC_QUPV3_M_HCLK_CLK>, + <&scc SCC_QUPV3_S_HCLK_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se20_i2c_active>; + pinctrl-1 = <&qupv3_se20_i2c_sleep>; + qcom,wrapper-core = <&qupv3_3>; + status = "disabled"; + }; + + qupv3_se21_i2c: i2c@2684000 { + compatible = "qcom,i2c-geni"; + reg = <0x2684000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&scc SCC_QUPV3_SE1_CLK>, + <&scc SCC_QUPV3_M_HCLK_CLK>, + <&scc SCC_QUPV3_S_HCLK_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se21_i2c_active>; + pinctrl-1 = <&qupv3_se21_i2c_sleep>; + qcom,wrapper-core = <&qupv3_3>; + status = "disabled"; + }; + + qupv3_se22_i2c: i2c@2688000 { + compatible = "qcom,i2c-geni"; + reg = <0x2688000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&scc SCC_QUPV3_SE2_CLK>, + <&scc SCC_QUPV3_M_HCLK_CLK>, + <&scc SCC_QUPV3_S_HCLK_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se22_i2c_active>; + pinctrl-1 = <&qupv3_se22_i2c_sleep>; + qcom,wrapper-core = <&qupv3_3>; + status = "disabled"; + }; + + /* SPI */ + qupv3_se21_spi: spi@2684000 { + compatible = "qcom,spi-geni"; + reg = <0x2684000 0x4000>; + reg-names = "se_phys"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&scc SCC_QUPV3_SE1_CLK>, + <&scc SCC_QUPV3_M_HCLK_CLK>, + <&scc SCC_QUPV3_S_HCLK_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se21_spi_active>; + pinctrl-1 = <&qupv3_se21_spi_sleep>; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_3>; + qcom,disable-dma; + status = "disabled"; + }; + + qupv3_se22_spi: spi@2688000 { + compatible = "qcom,spi-geni"; + reg = <0x2688000 0x4000>; + reg-names = "se_phys"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&scc SCC_QUPV3_SE2_CLK>, + <&scc SCC_QUPV3_M_HCLK_CLK>, + <&scc SCC_QUPV3_S_HCLK_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qupv3_se22_spi_active>; + pinctrl-1 = <&qupv3_se22_spi_sleep>; + spi-max-frequency = <50000000>; + qcom,wrapper-core = <&qupv3_3>; + qcom,disable-dma; + status = "disabled"; + }; +}; diff --git a/qcom/sm8150-usb.dtsi b/qcom/sm8150-usb.dtsi new file mode 100644 index 000000000000..81c724f22e49 --- /dev/null +++ b/qcom/sm8150-usb.dtsi @@ -0,0 +1,349 @@ +#include +#include + +&soc { + /* Primary USB port related controller */ + usb0: ssusb@a600000 { + compatible = "qcom,dwc-usb3-msm"; + reg = <0x0a600000 0x100000>; + reg-names = "core_base"; + + iommus = <&apps_smmu 0x140 0x0>; + qcom,iommu-dma = "atomic"; + qcom,iommu-dma-addr-pool = <0x90000000 0x60000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dma-ranges; + + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "dp_hs_phy_irq", "pwr_event_irq", + "ss_phy_irq", "dm_hs_phy_irq"; + qcom,use-pdc-interrupts; + + USB3_GDSC-supply = <&usb30_prim_gdsc>; + clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + /* + * GCC_USB3_SEC_CLKREF_CLK provides ref_clk for both + * USB instances. Hence GCC_USB3_PRIM_CLKREF_CLK is not + * used here. + */ + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "core_clk", "iface_clk", "bus_aggr_clk", + "utmi_clk", "sleep_clk", "xo"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + reset-names = "core_reset"; + + qcom,core-clk-rate = <200000000>; + qcom,core-clk-rate-hs = <66666667>; + qcom,dwc-usb3-msm-tx-fifo-size = <27696>; + qcom,ignore-wakeup-src-in-hostmode; + + interconnect-names = "usb-ddr", "ddr-usb"; + interconnects = <&aggre1_noc MASTER_USB3_0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>; + + dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = ; + usb-phy = <&usb2_phy0>, <&usb_nop_phy>; + linux,sysdev_is_parent; + snps,disable-clk-gating; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,is-utmi-l1-suspend; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + + qcom,usbbam@a704000 { + compatible = "qcom,usb-bam-msm"; + reg = <0xa704000 0x17000>; + interrupts = ; + + qcom,usb-bam-fifo-baseaddr = <0x146bb000>; + qcom,usb-bam-num-pipes = <4>; + qcom,disable-clk-gating; + qcom,usb-bam-override-threshold = <0x4001>; + qcom,usb-bam-max-mbps-highspeed = <400>; + qcom,usb-bam-max-mbps-superspeed = <3600>; + qcom,reset-bam-on-connect; + + qcom,pipe0 { + label = "ssusb-qdss-in-0"; + qcom,usb-bam-mem-type = <2>; + qcom,dir = <1>; + qcom,pipe-num = <0>; + qcom,peer-bam = <0>; + qcom,peer-bam-physical-address = <0x6064000>; + qcom,src-bam-pipe-index = <0>; + qcom,dst-bam-pipe-index = <0>; + qcom,data-fifo-offset = <0x0>; + qcom,data-fifo-size = <0x1800>; + qcom,descriptor-fifo-offset = <0x1800>; + qcom,descriptor-fifo-size = <0x800>; + }; + }; + }; + + /* Primary USB port related High Speed PHY */ + usb2_phy0: hsphy@88e2000 { + compatible = "qcom,usb-hsphy-snps-femto"; + reg = <0x88e2000 0x110>, + <0x007801f8 0x4>; + reg-names = "hsusb_phy_base", + "phy_rcal_reg"; + + vdd-supply = <&pm8150_l5>; + vdda18-supply = <&pm8150_l12>; + vdda33-supply = <&pm8150_l2>; + qcom,vdd-voltage-level = <0 880000 880000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref_clk_src"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + reset-names = "phy_reset"; + qcom,param-override-seq = <0x43 0x70 + 0x01 0xb0>; + qcom,rcal-mask = <0x1e00000>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; + }; + + usb_nop_phy: usb_nop_phy { + compatible = "usb-nop-xceiv"; + }; + + /* Secondary USB port related controller */ + usb1: ssusb@a800000 { + compatible = "qcom,dwc-usb3-msm"; + reg = <0x0a800000 0x100000>; + reg-names = "core_base"; + + iommus = <&apps_smmu 0x160 0x0>; + qcom,iommu-dma = "atomic"; + qcom,iommu-dma-addr-pool = <0x90000000 0x60000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dma-ranges; + + interrupts-extended = <&pdc 11 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "dp_hs_phy_irq", "pwr_event_irq", + "ss_phy_irq", "dm_hs_phy_irq"; + qcom,use-pdc-interrupts; + qcom,default-mode-host; + qcom,ignore-wakeup-src-in-hostmode; + + USB3_GDSC-supply = <&usb30_sec_gdsc>; + clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "core_clk", "iface_clk", "bus_aggr_clk", + "utmi_clk", "sleep_clk", "xo"; + + resets = <&gcc GCC_USB30_SEC_BCR>; + reset-names = "core_reset"; + + qcom,core-clk-rate = <200000000>; + qcom,core-clk-rate-hs = <66666667>; + qcom,dwc-usb3-msm-tx-fifo-size = <27696>; + + interconnect-names = "usb-ddr", "ddr-usb"; + interconnects = <&aggre1_noc MASTER_USB3_1 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>; + + dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xcd00>; + interrupts = ; + usb-phy = <&usb2_phy1>, <&usb_qmp_phy>; + linux,sysdev_is_parent; + snps,disable-clk-gating; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,ssp-u3-u0-quirk; + snps,is-utmi-l1-suspend; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + tx-fifo-resize; + maximum-speed = "super-speed-plus"; + dr_mode = "otg"; + }; + }; + + /* Secondary USB port related High Speed PHY */ + usb2_phy1: hsphy@88e3000 { + compatible = "qcom,usb-hsphy-snps-femto"; + reg = <0x88e3000 0x110>, + <0x007801f8 0x4>; + reg-names = "hsusb_phy_base", + "phy_rcal_reg"; + + vdd-supply = <&pm8150_l5>; + vdda18-supply = <&pm8150_l12>; + vdda33-supply = <&pm8150_l2>; + qcom,vdd-voltage-level = <0 880000 880000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref_clk_src"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + reset-names = "phy_reset"; + qcom,param-override-seq = <0x43 0x70 + 0x01 0xb0>; + qcom,rcal-mask = <0x1e00000>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; + }; + + /* Secondary USB port related QMP PHY */ + usb_qmp_phy: ssphy@88eb000 { + compatible = "qcom,usb-ssphy-qmp-v2"; + reg = <0x88eb000 0x1000>, + <0x088eb88c 0x4>; + reg-names = "qmp_phy_base", + "pcs_clamp_enable_reg"; + + vdd-supply = <&pm8150_l5>; + qcom,vdd-voltage-level = <0 880000 880000>; + qcom,vdd-max-load-uA = <47000>; + core-supply = <&pm8150l_l3>; + qcom,qmp-phy-init-seq = + /* */ + ; + + qcom,qmp-phy-reg-offset = + ; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux_clk", "pipe_clk", "ref_clk_src", + "ref_clk", "com_aux_clk"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy_reset", "phy_phy_reset"; + }; +}; diff --git a/qcom/sm8150-v2.dtsi b/qcom/sm8150-v2.dtsi index a6f26d35f304..c2d7cb5fb7f2 100644 --- a/qcom/sm8150-v2.dtsi +++ b/qcom/sm8150-v2.dtsi @@ -35,3 +35,264 @@ }; #include "msm-arm-smmu-sm8150-v2.dtsi" + +&pcie0 { + reg = <0x1c00000 0x4000>, + <0x1c06000 0x1000>, + <0x60000000 0xf1d>, + <0x60000f20 0xa8>, + <0x60001000 0x1000>, + <0x60100000 0x100000>, + <0x60200000 0x100000>, + <0x60300000 0x3d00000>; + + qcom,pcie-phy-ver = <2110>; + + qcom,phy-sequence = <0x0840 0x03 0x0 + 0x0094 0x08 0x0 + 0x0154 0x34 0x0 + 0x016c 0x08 0x0 + 0x0058 0x0f 0x0 + 0x00a4 0x42 0x0 + 0x0110 0x24 0x0 + 0x011c 0x03 0x0 + 0x0118 0xb4 0x0 + 0x010c 0x02 0x0 + 0x01bc 0x11 0x0 + 0x00bc 0x82 0x0 + 0x00d4 0x03 0x0 + 0x00d0 0x55 0x0 + 0x00cc 0x55 0x0 + 0x00b0 0x1a 0x0 + 0x00ac 0x0a 0x0 + 0x00c4 0x68 0x0 + 0x00e0 0x02 0x0 + 0x00dc 0xaa 0x0 + 0x00d8 0xab 0x0 + 0x00b8 0x34 0x0 + 0x00b4 0x14 0x0 + 0x0158 0x01 0x0 + 0x0074 0x06 0x0 + 0x007c 0x16 0x0 + 0x0084 0x36 0x0 + 0x0078 0x06 0x0 + 0x0080 0x16 0x0 + 0x0088 0x36 0x0 + 0x01b0 0x1e 0x0 + 0x01ac 0xb9 0x0 + 0x01b8 0x18 0x0 + 0x01b4 0x94 0x0 + 0x0050 0x07 0x0 + 0x0010 0x00 0x0 + 0x001c 0x31 0x0 + 0x0020 0x01 0x0 + 0x0024 0xde 0x0 + 0x0028 0x07 0x0 + 0x0030 0x4c 0x0 + 0x0034 0x06 0x0 + 0x029c 0x12 0x0 + 0x0284 0x35 0x0 + 0x023c 0x11 0x0 + 0x051c 0x03 0x0 + 0x0518 0x1c 0x0 + 0x0524 0x1e 0x0 + 0x04e8 0x00 0x0 + 0x04ec 0x0e 0x0 + 0x04f0 0x4a 0x0 + 0x04f4 0x0f 0x0 + 0x05b4 0x04 0x0 + 0x0434 0x7f 0x0 + 0x0444 0x70 0x0 + 0x0510 0x17 0x0 + 0x04d4 0x54 0x0 + 0x04d8 0x07 0x0 + 0x0598 0xd4 0x0 + 0x059c 0x54 0x0 + 0x05a0 0xdb 0x0 + 0x05a4 0x3b 0x0 + 0x05a8 0x31 0x0 + 0x0584 0x24 0x0 + 0x0588 0xe4 0x0 + 0x058c 0xec 0x0 + 0x0590 0x3b 0x0 + 0x0594 0x36 0x0 + 0x0570 0xff 0x0 + 0x0574 0xff 0x0 + 0x0578 0xff 0x0 + 0x057c 0x7f 0x0 + 0x0580 0x66 0x0 + 0x04fc 0x00 0x0 + 0x04f8 0xc0 0x0 + 0x0460 0x30 0x0 + 0x0464 0xc0 0x0 + 0x05bc 0x0c 0x0 + 0x04dc 0x0d 0x0 + 0x0408 0x0c 0x0 + 0x0414 0x03 0x0 + 0x09a4 0x01 0x0 + 0x0c90 0x00 0x0 + 0x0c40 0x01 0x0 + 0x0c48 0x01 0x0 + 0x0c50 0x00 0x0 + 0x0cbc 0x00 0x0 + 0x0ce0 0x58 0x0 + 0x0048 0x90 0x0 + 0x0c1c 0xc1 0x0 + 0x0988 0x88 0x0 + 0x0998 0x0b 0x0 + 0x08dc 0x0d 0x0 + 0x09ec 0x01 0x0 + 0x0800 0x00 0x0 + 0x0844 0x03 0x0>; +}; + +&pcie1 { + reg = <0x1c08000 0x4000>, + <0x1c0e000 0x2000>, + <0x40000000 0xf1d>, + <0x40000f20 0xa8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>, + <0x40200000 0x100000>, + <0x40300000 0x1fd00000>; + + qcom,pcie-phy-ver = <2109>; + + qcom,phy-sequence = <0x0a40 0x03 0x0 + 0x0010 0x00 0x0 + 0x001c 0x31 0x0 + 0x0020 0x01 0x0 + 0x0024 0xde 0x0 + 0x0028 0x07 0x0 + 0x0030 0x4c 0x0 + 0x0034 0x06 0x0 + 0x0048 0x90 0x0 + 0x0058 0x0f 0x0 + 0x0074 0x06 0x0 + 0x0078 0x06 0x0 + 0x007c 0x16 0x0 + 0x0080 0x16 0x0 + 0x0084 0x36 0x0 + 0x0088 0x36 0x0 + 0x0094 0x08 0x0 + 0x00a4 0x42 0x0 + 0x00ac 0x0a 0x0 + 0x00b0 0x1a 0x0 + 0x00b4 0x14 0x0 + 0x00b8 0x34 0x0 + 0x00bc 0x82 0x0 + 0x00c4 0x68 0x0 + 0x00cc 0x55 0x0 + 0x00d0 0x55 0x0 + 0x00d4 0x03 0x0 + 0x00d8 0xab 0x0 + 0x00dc 0xaa 0x0 + 0x00e0 0x02 0x0 + 0x010c 0x02 0x0 + 0x0110 0x24 0x0 + 0x0118 0xb4 0x0 + 0x011c 0x03 0x0 + 0x0154 0x34 0x0 + 0x0158 0x01 0x0 + 0x016c 0x08 0x0 + 0x01ac 0xb9 0x0 + 0x01b0 0x1e 0x0 + 0x01b4 0x94 0x0 + 0x01b8 0x18 0x0 + 0x01bc 0x11 0x0 + 0x023c 0x11 0x0 + 0x0284 0x35 0x0 + 0x029c 0x12 0x0 + 0x0304 0x02 0x0 + 0x0408 0x0c 0x0 + 0x0414 0x03 0x0 + 0x0434 0x7f 0x0 + 0x0444 0x70 0x0 + 0x0460 0x30 0x0 + 0x0464 0x00 0x0 + 0x04d4 0x04 0x0 + 0x04d8 0x07 0x0 + 0x04dc 0x0d 0x0 + 0x04e8 0x00 0x0 + 0x04ec 0x0e 0x0 + 0x04f0 0x4a 0x0 + 0x04f4 0x0f 0x0 + 0x04f8 0xc0 0x0 + 0x04fc 0x00 0x0 + 0x0510 0x17 0x0 + 0x0518 0x1c 0x0 + 0x051c 0x03 0x0 + 0x0524 0x1e 0x0 + 0x0570 0xff 0x0 + 0x0574 0xff 0x0 + 0x0578 0xff 0x0 + 0x057c 0x7f 0x0 + 0x0580 0x66 0x0 + 0x0584 0x24 0x0 + 0x0588 0xe4 0x0 + 0x058c 0xec 0x0 + 0x0590 0x3b 0x0 + 0x0594 0x36 0x0 + 0x0598 0xd4 0x0 + 0x059c 0x54 0x0 + 0x05a0 0xdb 0x0 + 0x05a4 0x3b 0x0 + 0x05a8 0x31 0x0 + 0x05bc 0x0c 0x0 + 0x063c 0x11 0x0 + 0x0684 0x35 0x0 + 0x069c 0x12 0x0 + 0x0704 0x20 0x0 + 0x0808 0x0c 0x0 + 0x0814 0x03 0x0 + 0x0834 0x7f 0x0 + 0x0844 0x70 0x0 + 0x0860 0x30 0x0 + 0x0864 0x00 0x0 + 0x08d4 0x04 0x0 + 0x08d8 0x07 0x0 + 0x08dc 0x0d 0x0 + 0x08e8 0x00 0x0 + 0x08ec 0x0e 0x0 + 0x08f0 0x4a 0x0 + 0x08f4 0x0f 0x0 + 0x08f8 0xc0 0x0 + 0x08fc 0x00 0x0 + 0x0910 0x17 0x0 + 0x0918 0x1c 0x0 + 0x091c 0x03 0x0 + 0x0924 0x1e 0x0 + 0x0970 0xff 0x0 + 0x0974 0xff 0x0 + 0x0978 0xff 0x0 + 0x097c 0x7f 0x0 + 0x0980 0x66 0x0 + 0x0984 0x24 0x0 + 0x0988 0xe4 0x0 + 0x098c 0xec 0x0 + 0x0990 0x3b 0x0 + 0x0994 0x36 0x0 + 0x0998 0xd4 0x0 + 0x099c 0x54 0x0 + 0x09a0 0xdb 0x0 + 0x09a4 0x3b 0x0 + 0x09a8 0x31 0x0 + 0x09bc 0x0c 0x0 + 0x0adc 0x05 0x0 + 0x0b88 0x88 0x0 + 0x0b98 0x0b 0x0 + 0x0ba4 0x01 0x0 + 0x0bec 0x12 0x0 + 0x0e0c 0x0d 0x0 + 0x0e14 0x07 0x0 + 0x0e1c 0xc1 0x0 + 0x0e40 0x01 0x0 + 0x0e48 0x01 0x0 + 0x0e90 0x00 0x0 + 0x0eb4 0x33 0x0 + 0x0ebc 0x00 0x0 + 0x0ee0 0x58 0x0 + 0x0ea4 0x0f 0x0 + 0x0a00 0x00 0x0 + 0x0a44 0x03 0x0>; +}; diff --git a/qcom/sm8150.dtsi b/qcom/sm8150.dtsi index b8e9208d6ec6..b267c74748e4 100644 --- a/qcom/sm8150.dtsi +++ b/qcom/sm8150.dtsi @@ -29,7 +29,11 @@ aliases { ufshc1 = &ufshc_mem; /* Embedded UFS slot */ - serial0 = &uart2; + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + pci-domain0 = &pcie0; /* PCIe0 domain */ + pci-domain1 = &pcie1; /* PCIe1 domain */ + serial0 = &qupv3_se12_2uart; + hsuart0 = &qupv3_se13_4uart; }; cpus { @@ -1574,6 +1578,63 @@ interrupts = <0 0>; interrupt-names = "smp2p-sleepstate-in"; }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x8804000 0x1000>; + reg-names = "hc_mem"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>; + clock-names = "iface", "core"; + + bus-width = <4>; + qcom,restore-after-cx-collapse; + + interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + + qcom,msm-bus,name = "sdhc2"; + qcom,msm-bus,num-cases = <6>; + qcom,msm-bus,num-paths = <2>; + qcom,msm-bus,vectors-KBps = + /* No vote */ + <0 0>, <0 0>, + /* 25 MB/s */ + <65360 100000>,<100000 100000>, + /* 50 MB/s */ + <130718 200000>,<133320 133320>, + /* 100 MB/s */ + <261438 200000>,<150000 150000>, + /* 200 MB/s */ + <261438 400000>,<300000 300000>, + /* Max. bandwidth */ + <1338562 4096000>,<1338562 4096000>; + qcom,bus-bw-vectors-bps = <0 25000000 50000000 100750000 + 200000000 4294967295>; + + /* DLL HSR settings. Refer go/hsr - DLL settings */ + qcom,dll-hsr-list = <0x0007642c 0x0 0x10 0x2C010800 0x80040868>; + + qcom,devfreq,freq-table = <50000000 201500000>; + + status = "disabled"; + + qos0 { + mask = <0x3f>; + vote = <44>; + }; + + qos1 { + mask = <0xc0>; + vote = <44>; + }; + }; }; &firmware { @@ -1586,7 +1647,9 @@ #include "sm8150-pinctrl.dtsi" #include "sm8150-regulator.dtsi" #include "sm8150-pm.dtsi" +#include "sm8150-qupv3.dtsi" #include "sm8150-slpi-pinctrl.dtsi" +#include "sm8150-ssc-qupv3.dtsi" #include "sm8150-smp2p.dtsi" #include "sm8150-gdsc.dtsi" #include "msm-arm-smmu-sm8150.dtsi" @@ -1745,3 +1808,5 @@ clocks = <&gcc GCC_NPU_CFG_AHB_CLK>; status = "ok"; }; +#include "sm8150-pcie.dtsi" +#include "sm8150-usb.dtsi"