diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index a1035f602bcb..51c9a2109fe6 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -6763,19 +6763,54 @@ enum qca_wlan_vendor_acs_select_reason {
 
 /**
  * enum qca_wlan_gpio_attr - Parameters for GPIO configuration
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND: Required (u32)
+ * value to specify the gpio command, please refer to enum qca_gpio_cmd_type
+ * to get the available value that this item can use.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM: Required (u32)
+ * value to specify the gpio number.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG or %.QCA_WLAN_VENDOR_GPIO_OUTPUT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE: Required (u32)
+ * value to specify the gpio output level, please refer to enum qca_gpio_value
+ * to get the available value that this item can use.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_OUTPUT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Required (u32)
+ * value to specify the gpio pull type, please refer to enum qca_gpio_pull_type
+ * to get the available value that this item can use.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Required (u32)
+ * value to specify the gpio interrupt mode, please refer to enum
+ * qca_gpio_interrupt_mode to get the available value that this item can use.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Required (u32)
+ * value to specify the gpio direction, please refer to enum qca_gpio_direction
+ * to get the available value that this item can use.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG.
  */
 enum qca_wlan_gpio_attr {
 	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
 	/* Unsigned 32-bit attribute for GPIO command */
-	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND,
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND = 1,
 	/* Unsigned 32-bit attribute for GPIO PIN number to configure */
-	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM,
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM = 2,
 	/* Unsigned 32-bit attribute for GPIO value to configure */
-	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE,
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE = 3,
 	/* Unsigned 32-bit attribute for GPIO pull type */
-	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE,
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE = 4,
 	/* Unsigned 32-bit attribute for GPIO interrupt mode */
-	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE,
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE = 5,
+	/* Unsigned 32-bit attribute for GPIO direction to configure */
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR = 6,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
@@ -6783,6 +6818,73 @@ enum qca_wlan_gpio_attr {
 		QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1,
 };
 
+/**
+ * enum gpio_cmd_type - GPIO configuration command type
+ * @QCA_WLAN_VENDOR_GPIO_CONFIG: set gpio configuration info
+ * @QCA_WLAN_VENDOR_GPIO_OUTPUT: set gpio output level
+ */
+enum qca_gpio_cmd_type {
+	QCA_WLAN_VENDOR_GPIO_CONFIG = 0,
+	QCA_WLAN_VENDOR_GPIO_OUTPUT = 1,
+};
+
+/**
+ * enum qca_gpio_pull_type - GPIO pull type
+ * @QCA_WLAN_GPIO_PULL_NONE: set gpio pull type to none
+ * @QCA_WLAN_GPIO_PULL_UP: set gpio pull up
+ * @QCA_WLAN_GPIO_PULL_DOWN: set gpio pull down
+ */
+enum qca_gpio_pull_type {
+	QCA_WLAN_GPIO_PULL_NONE = 0,
+	QCA_WLAN_GPIO_PULL_UP = 1,
+	QCA_WLAN_GPIO_PULL_DOWN = 2,
+	QCA_WLAN_GPIO_PULL_MAX,
+};
+
+/**
+ * enum qca_gpio_direction - GPIO direction
+ * @QCA_WLAN_GPIO_INPUT: set gpio as input mode
+ * @QCA_WLAN_GPIO_OUTPUT: set gpio as output mode
+ * @QCA_WLAN_GPIO_VALUE_MAX: invalid value
+ */
+enum qca_gpio_direction {
+	QCA_WLAN_GPIO_INPUT = 0,
+	QCA_WLAN_GPIO_OUTPUT = 1,
+	QCA_WLAN_GPIO_DIR_MAX,
+};
+
+/**
+ * enum qca_gpio_value - GPIO Value
+ * @QCA_WLAN_GPIO_LEVEL_LOW: set gpio output level to low
+ * @QCA_WLAN_GPIO_LEVEL_HIGH: set gpio output level to high
+ * @QCA_WLAN_GPIO_LEVEL_MAX: invalid value
+ */
+enum qca_gpio_value {
+	QCA_WLAN_GPIO_LEVEL_LOW = 0,
+	QCA_WLAN_GPIO_LEVEL_HIGH = 1,
+	QCA_WLAN_GPIO_LEVEL_MAX,
+};
+
+/**
+ * enum gpio_interrupt_mode - GPIO interrupt mode
+ * @QCA_WLAN_GPIO_INTMODE_DISABLE: disable interrupt trigger
+ * @QCA_WLAN_GPIO_INTMODE_RISING_EDGE: interrupt with gpio rising edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_FALLING_EDGE: interrupt with gpio falling edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_BOTH_EDGE: interrupt with gpio both edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_LEVEL_LOW: interrupt with gpio level low trigger
+ * @QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH: interrupt with gpio level high trigger
+ * @QCA_WLAN_GPIO_INTMODE_MAX: invalid value
+ */
+enum qca_gpio_interrupt_mode {
+	QCA_WLAN_GPIO_INTMODE_DISABLE = 0,
+	QCA_WLAN_GPIO_INTMODE_RISING_EDGE = 1,
+	QCA_WLAN_GPIO_INTMODE_FALLING_EDGE = 2,
+	QCA_WLAN_GPIO_INTMODE_BOTH_EDGE = 3,
+	QCA_WLAN_GPIO_INTMODE_LEVEL_LOW = 4,
+	QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH = 5,
+	QCA_WLAN_GPIO_INTMODE_MAX,
+};
+
 /**
  * qca_wlan_set_qdepth_thresh_attr - Parameters for setting
  * MSDUQ depth threshold per peer per tid in the target
diff --git a/umac/cmn_services/inc/wlan_cmn.h b/umac/cmn_services/inc/wlan_cmn.h
index 89bd70382bc1..dbb837dd5208 100644
--- a/umac/cmn_services/inc/wlan_cmn.h
+++ b/umac/cmn_services/inc/wlan_cmn.h
@@ -280,6 +280,7 @@
  * @WLAN_UMAC_COMP_DCS:           DCS
  * @WLAN_IOT_SIM_COMP:            IOT Simulation component
  * @WLAN_UMAC_COMP_IF_MGR:        Interface manager component
+ * @WLAN_UMAC_COMP_GPIO:          GPIO Configuration
  * @WLAN_UMAC_COMP_ID_MAX:        Maximum components in UMAC
  *
  * This id is static.
@@ -325,6 +326,7 @@ enum wlan_umac_comp_id {
 	WLAN_UMAC_COMP_DCS                = 36,
 	WLAN_IOT_SIM_COMP                 = 37,
 	WLAN_UMAC_COMP_IF_MGR             = 38,
+	WLAN_UMAC_COMP_GPIO               = 39,
 	WLAN_UMAC_COMP_ID_MAX,
 };