From 6d000e1c16250f0dd60d88fa91e4b30aae193c98 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 13 Sep 2021 15:57:43 +0200 Subject: [PATCH 01/18] Revert "x86/kvm: fix vcpu-id indexed array sizes" commit 1e254d0d86a0f2efd4190a89d5204b37c18c6381 upstream. This reverts commit 76b4f357d0e7d8f6f0013c733e6cba1773c266d3. The commit has the wrong reasoning, as KVM_MAX_VCPU_ID is not defining the maximum allowed vcpu-id as its name suggests, but the number of vcpu-ids. So revert this patch again. Suggested-by: Eduardo Habkost Signed-off-by: Juergen Gross Signed-off-by: Paolo Bonzini Message-Id: <20210913135745.13944-2-jgross@suse.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- arch/x86/kvm/ioapic.c | 2 +- arch/x86/kvm/ioapic.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c index 642031b896f6..24a6905d60ee 100644 --- a/arch/x86/kvm/ioapic.c +++ b/arch/x86/kvm/ioapic.c @@ -91,7 +91,7 @@ static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic, static void rtc_irq_eoi_tracking_reset(struct kvm_ioapic *ioapic) { ioapic->rtc_status.pending_eoi = 0; - bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID + 1); + bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID); } static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic); diff --git a/arch/x86/kvm/ioapic.h b/arch/x86/kvm/ioapic.h index 283f1f489bca..ea1a4e0297da 100644 --- a/arch/x86/kvm/ioapic.h +++ b/arch/x86/kvm/ioapic.h @@ -43,13 +43,13 @@ struct kvm_vcpu; struct dest_map { /* vcpu bitmap where IRQ has been sent */ - DECLARE_BITMAP(map, KVM_MAX_VCPU_ID + 1); + DECLARE_BITMAP(map, KVM_MAX_VCPU_ID); /* * Vector sent to a given vcpu, only valid when * the vcpu's bit in map is set */ - u8 vectors[KVM_MAX_VCPU_ID + 1]; + u8 vectors[KVM_MAX_VCPU_ID]; }; From d6013265a779d685a6e88b3f2af065e8855c2877 Mon Sep 17 00:00:00 2001 From: Neal Liu Date: Fri, 10 Sep 2021 15:36:19 +0800 Subject: [PATCH 02/18] usb: ehci: handshake CMD_RUN instead of STS_HALT commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream. For Aspeed, HCHalted status depends on not only Run/Stop but also ASS/PSS status. Handshake CMD_RUN on startup instead. Tested-by: Tao Ren Reviewed-by: Tao Ren Acked-by: Alan Stern Signed-off-by: Neal Liu Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com Cc: Joel Stanley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 11 ++++++++++- drivers/usb/host/ehci-platform.c | 6 ++++++ drivers/usb/host/ehci.h | 1 + 3 files changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5c6ce1ef3f4b..c0e344c3a848 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -634,7 +634,16 @@ static int ehci_run (struct usb_hcd *hcd) /* Wait until HC become operational */ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); - rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000); + + /* For Aspeed, STS_HALT also depends on ASS/PSS status. + * Check CMD_RUN instead. + */ + if (ehci->is_aspeed) + rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN, + 1, 100 * 1000); + else + rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, + 0, 100 * 1000); up_write(&ehci_cf_port_reset_rwsem); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index e4fc3f66d43b..accbcc989c50 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -286,6 +286,12 @@ static int ehci_platform_probe(struct platform_device *dev) "has-transaction-translator")) hcd->has_tt = 1; + if (of_device_is_compatible(dev->dev.of_node, + "aspeed,ast2500-ehci") || + of_device_is_compatible(dev->dev.of_node, + "aspeed,ast2600-ehci")) + ehci->is_aspeed = 1; + if (soc_device_match(quirk_poll_match)) priv->quirk_poll = true; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index ac5e967907d1..356738462ce4 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -218,6 +218,7 @@ struct ehci_hcd { /* one per controller */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ unsigned need_oc_pp_cycle:1; /* MPC834X port power */ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned is_aspeed:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) From 161571745de126d2dc6685aee3d6d83fbe7928bb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 27 Oct 2021 10:08:49 +0200 Subject: [PATCH 03/18] usb: gadget: Mark USB_FSL_QE broken on 64-bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a0548b26901f082684ad1fb3ba397d2de3a1406a upstream. On 64-bit: drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep0_rx’: drivers/usb/gadget/udc/fsl_qe_udc.c:842:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 842 | vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); | ^ In file included from drivers/usb/gadget/udc/fsl_qe_udc.c:41: drivers/usb/gadget/udc/fsl_qe_udc.c:843:28: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 843 | frame_set_data(pframe, (u8 *)vaddr); | ^ The driver assumes physical and virtual addresses are 32-bit, hence it cannot work on 64-bit platforms. Acked-by: Li Yang Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20211027080849.3276289-1-geert@linux-m68k.org Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index d354036ff6c8..f985bb4a42db 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -330,6 +330,7 @@ config USB_AMD5536UDC config USB_FSL_QE tristate "Freescale QE/CPM USB Device Controller" depends on FSL_SOC && (QUICC_ENGINE || CPM) + depends on !64BIT || BROKEN help Some of Freescale PowerPC processors have a Full Speed QE/CPM2 USB controller, which support device mode with 4 From 5c3eba29047918e5174f309ca2051ff6b585f9cf Mon Sep 17 00:00:00 2001 From: Viraj Shah Date: Thu, 21 Oct 2021 11:36:44 +0200 Subject: [PATCH 04/18] usb: musb: Balance list entry in musb_gadget_queue commit 21b5fcdccb32ff09b6b63d4a83c037150665a83f upstream. musb_gadget_queue() adds the passed request to musb_ep::req_list. If the endpoint is idle and it is the first request then it invokes musb_queue_resume_work(). If the function returns an error then the error is passed to the caller without any clean-up and the request remains enqueued on the list. If the caller enqueues the request again then the list corrupts. Remove the request from the list on error. Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Cc: stable Signed-off-by: Viraj Shah Link: https://lore.kernel.org/r/20211021093644.4734-1-viraj.shah@linutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ffe462a657b1..4622400ba4dd 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1248,9 +1248,11 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, status = musb_queue_resume_work(musb, musb_ep_restart_resume_work, request); - if (status < 0) + if (status < 0) { dev_err(musb->controller, "%s resume work: %i\n", __func__, status); + list_del(&request->list); + } } unlock: From b60e89b63eb9ff02881905952d15f77bdb3971bd Mon Sep 17 00:00:00 2001 From: James Buren Date: Wed, 13 Oct 2021 20:55:04 -0500 Subject: [PATCH 05/18] usb-storage: Add compatibility quirk flags for iODD 2531/2541 commit 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 upstream. These drive enclosures have firmware bugs that make it impossible to mount a new virtual ISO image after Linux ejects the old one if the device is locked by Linux. Windows bypasses this problem by the fact that they do not lock the device. Add a quirk to disable device locking for these drive enclosures. Acked-by: Alan Stern Signed-off-by: James Buren Cc: stable Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 7442793fe050..3ba4e060fd05 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -406,6 +406,16 @@ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, "785EPX Storage", USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN), +/* + * Reported by James Buren + * Virtual ISOs cannot be remounted if ejected while the device is locked + * Disable locking to mimic Windows behavior that bypasses the issue + */ +UNUSUAL_DEV( 0x04c5, 0x2028, 0x0001, 0x0001, + "iODD", + "2531/2541", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE), + /* * Not sure who reported this originally but * Pavel Machek reported that the extra US_FL_SINGLE_LUN From 589ac131b3abb3beba51782d62ace557b8a314ee Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Fri, 15 Oct 2021 16:38:11 -0700 Subject: [PATCH 06/18] binder: don't detect sender/target during buffer cleanup commit 32e9f56a96d8d0f23cb2aeb2a3cd18d40393e787 upstream. When freeing txn buffers, binder_transaction_buffer_release() attempts to detect whether the current context is the target by comparing current->group_leader to proc->tsk. This is an unreliable test. Instead explicitly pass an 'is_failure' boolean. Detecting the sender was being used as a way to tell if the transaction failed to be sent. When cleaning up after failing to send a transaction, there is no need to close the fds associated with a BINDER_TYPE_FDA object. Now 'is_failure' can be used to accurately detect this case. Fixes: 44d8047f1d87 ("binder: use standard functions to allocate fds") Cc: stable Acked-by: Christian Brauner Signed-off-by: Todd Kjos Link: https://lore.kernel.org/r/20211015233811.3532235-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 4eaef780844e..2be6687c0148 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2257,7 +2257,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc, binder_dec_node(buffer->target_node, 1, 0); off_start_offset = ALIGN(buffer->data_size, sizeof(void *)); - off_end_offset = is_failure ? failed_at : + off_end_offset = is_failure && failed_at ? failed_at : off_start_offset + buffer->offsets_size; for (buffer_offset = off_start_offset; buffer_offset < off_end_offset; buffer_offset += sizeof(binder_size_t)) { @@ -2343,9 +2343,8 @@ static void binder_transaction_buffer_release(struct binder_proc *proc, binder_size_t fd_buf_size; binder_size_t num_valid; - if (proc->tsk != current->group_leader) { + if (is_failure) { /* - * Nothing to do if running in sender context * The fd fixups have not been applied so no * fds need to be closed. */ @@ -3548,6 +3547,7 @@ err_invalid_target_handle: * binder_free_buf() - free the specified buffer * @proc: binder proc that owns buffer * @buffer: buffer to be freed + * @is_failure: failed to send transaction * * If buffer for an async transaction, enqueue the next async * transaction from the node. @@ -3557,7 +3557,7 @@ err_invalid_target_handle: static void binder_free_buf(struct binder_proc *proc, struct binder_thread *thread, - struct binder_buffer *buffer) + struct binder_buffer *buffer, bool is_failure) { binder_inner_proc_lock(proc); if (buffer->transaction) { @@ -3585,7 +3585,7 @@ binder_free_buf(struct binder_proc *proc, binder_node_inner_unlock(buf_node); } trace_binder_transaction_buffer_release(buffer); - binder_transaction_buffer_release(proc, thread, buffer, 0, false); + binder_transaction_buffer_release(proc, thread, buffer, 0, is_failure); binder_alloc_free_buf(&proc->alloc, buffer); } @@ -3786,7 +3786,7 @@ static int binder_thread_write(struct binder_proc *proc, proc->pid, thread->pid, (u64)data_ptr, buffer->debug_id, buffer->transaction ? "active" : "finished"); - binder_free_buf(proc, thread, buffer); + binder_free_buf(proc, thread, buffer, false); break; } @@ -4474,7 +4474,7 @@ retry: buffer->transaction = NULL; binder_cleanup_transaction(t, "fd fixups failed", BR_FAILED_REPLY); - binder_free_buf(proc, thread, buffer); + binder_free_buf(proc, thread, buffer, true); binder_debug(BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n", proc->pid, thread->pid, From adc56dbfc4aa2e46aa256a36b3d44f10de1bdc37 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Wed, 11 Nov 2020 14:54:50 +0100 Subject: [PATCH 07/18] printk/console: Allow to disable console output by using console="" or console=null commit 3cffa06aeef7ece30f6b5ac0ea51f264e8fea4d0 upstream. The commit 48021f98130880dd74 ("printk: handle blank console arguments passed in.") prevented crash caused by empty console= parameter value. Unfortunately, this value is widely used on Chromebooks to disable the console output. The above commit caused performance regression because the messages were pushed on slow console even though nobody was watching it. Use ttynull driver explicitly for console="" and console=null parameters. It has been created for exactly this purpose. It causes that preferred_console is set. As a result, ttySX and ttyX are not used as a fallback. And only ttynull console gets registered by default. It still allows to register other consoles either by additional console= parameters or SPCR. It prevents regression because it worked this way even before. Also it is a sane semantic. Preventing output on all consoles should be done another way, for example, by introducing mute_console parameter. Link: https://lore.kernel.org/r/20201006025935.GA597@jagdpanzerIV.localdomain Suggested-by: Sergey Senozhatsky Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Acked-by: Sergey Senozhatsky Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20201111135450.11214-3-pmladek@suse.com Cc: Yi Fan Signed-off-by: Greg Kroah-Hartman --- kernel/printk/printk.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 5569ef6bc183..23e26a203a9e 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2193,8 +2193,15 @@ static int __init console_setup(char *str) char *s, *options, *brl_options = NULL; int idx; - if (str[0] == 0) + /* + * console="" or console=null have been suggested as a way to + * disable console output. Use ttynull that has been created + * for exacly this purpose. + */ + if (str[0] == 0 || strcmp(str, "null") == 0) { + __add_preferred_console("ttynull", 0, NULL, NULL); return 1; + } if (_braille_console_setup(&str, &brl_options)) return 1; From 6e80e9314f8bb52d9eabe1907698718ff01120f5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 18 Oct 2021 12:37:41 +0200 Subject: [PATCH 08/18] isofs: Fix out of bound access for corrupted isofs image commit e96a1866b40570b5950cda8602c2819189c62a48 upstream. When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it. Reported-and-tested-by: syzbot+6fc7fb214625d82af7d1@syzkaller.appspotmail.com CC: stable@vger.kernel.org Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman --- fs/isofs/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c index bf30f6ce8dd1..74e487d63c62 100644 --- a/fs/isofs/inode.c +++ b/fs/isofs/inode.c @@ -1328,6 +1328,8 @@ static int isofs_read_inode(struct inode *inode, int relocated) de = (struct iso_directory_record *) (bh->b_data + offset); de_len = *(unsigned char *) de; + if (de_len < sizeof(struct iso_directory_record)) + goto fail; if (offset + de_len > bufsize) { int frag1 = bufsize - offset; From 3efb7af8ac437085b6c776e5b54830b149d86efe Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 27 Oct 2021 11:35:29 +0200 Subject: [PATCH 09/18] comedi: dt9812: fix DMA buffers on stack commit 536de747bc48262225889a533db6650731ab25d3 upstream. USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is. Fixes: 63274cd7d38a ("Staging: comedi: add usb dt9812 driver") Cc: stable@vger.kernel.org # 2.6.29 Reviewed-by: Ian Abbott Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt9812.c | 115 ++++++++++++++++++------ 1 file changed, 86 insertions(+), 29 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index 634f57730c1e..704b04d2980d 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include "../comedi_usb.h" @@ -237,22 +238,42 @@ static int dt9812_read_info(struct comedi_device *dev, { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; + size_t tbuf_size; int count, ret; + void *tbuf; - cmd.cmd = cpu_to_le32(DT9812_R_FLASH_DATA); - cmd.u.flash_data_info.address = + tbuf_size = max(sizeof(*cmd), buf_size); + + tbuf = kzalloc(tbuf_size, GFP_KERNEL); + if (!tbuf) + return -ENOMEM; + + cmd = tbuf; + + cmd->cmd = cpu_to_le32(DT9812_R_FLASH_DATA); + cmd->u.flash_data_info.address = cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset); - cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size); + cmd->u.flash_data_info.numbytes = cpu_to_le16(buf_size); /* DT9812 only responds to 32 byte writes!! */ ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); if (ret) - return ret; + goto out; - return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), - buf, buf_size, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), + tbuf, buf_size, &count, DT9812_USB_TIMEOUT); + if (!ret) { + if (count == buf_size) + memcpy(buf, tbuf, buf_size); + else + ret = -EREMOTEIO; + } +out: + kfree(tbuf); + + return ret; } static int dt9812_read_multiple_registers(struct comedi_device *dev, @@ -261,22 +282,42 @@ static int dt9812_read_multiple_registers(struct comedi_device *dev, { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; int i, count, ret; + size_t buf_size; + void *buf; - cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG); - cmd.u.read_multi_info.count = reg_count; + buf_size = max_t(size_t, sizeof(*cmd), reg_count); + + buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + cmd = buf; + + cmd->cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG); + cmd->u.read_multi_info.count = reg_count; for (i = 0; i < reg_count; i++) - cmd.u.read_multi_info.address[i] = address[i]; + cmd->u.read_multi_info.address[i] = address[i]; /* DT9812 only responds to 32 byte writes!! */ ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); if (ret) - return ret; + goto out; - return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), - value, reg_count, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), + buf, reg_count, &count, DT9812_USB_TIMEOUT); + if (!ret) { + if (count == reg_count) + memcpy(value, buf, reg_count); + else + ret = -EREMOTEIO; + } +out: + kfree(buf); + + return ret; } static int dt9812_write_multiple_registers(struct comedi_device *dev, @@ -285,19 +326,27 @@ static int dt9812_write_multiple_registers(struct comedi_device *dev, { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; int i, count; + int ret; - cmd.cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG); - cmd.u.read_multi_info.count = reg_count; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG); + cmd->u.read_multi_info.count = reg_count; for (i = 0; i < reg_count; i++) { - cmd.u.write_multi_info.write[i].address = address[i]; - cmd.u.write_multi_info.write[i].value = value[i]; + cmd->u.write_multi_info.write[i].address = address[i]; + cmd->u.write_multi_info.write[i].value = value[i]; } /* DT9812 only responds to 32 byte writes!! */ - return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); + kfree(cmd); + + return ret; } static int dt9812_rmw_multiple_registers(struct comedi_device *dev, @@ -306,17 +355,25 @@ static int dt9812_rmw_multiple_registers(struct comedi_device *dev, { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; int i, count; + int ret; - cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG); - cmd.u.rmw_multi_info.count = reg_count; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG); + cmd->u.rmw_multi_info.count = reg_count; for (i = 0; i < reg_count; i++) - cmd.u.rmw_multi_info.rmw[i] = rmw[i]; + cmd->u.rmw_multi_info.rmw[i] = rmw[i]; /* DT9812 only responds to 32 byte writes!! */ - return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); + kfree(cmd); + + return ret; } static int dt9812_digital_in(struct comedi_device *dev, u8 *bits) From b0156b7c9649d8f55a2ce3d3258509f1b2a181c3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 27 Oct 2021 11:35:28 +0200 Subject: [PATCH 10/18] comedi: ni_usb6501: fix NULL-deref in command paths commit 907767da8f3a925b060c740e0b5c92ea7dbec440 upstream. The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing). Add the missing sanity checks to probe(). Fixes: a03bb00e50ab ("staging: comedi: add NI USB-6501 support") Cc: stable@vger.kernel.org # 3.18 Cc: Luca Ellero Reviewed-by: Ian Abbott Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211027093529.30896-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_usb6501.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/staging/comedi/drivers/ni_usb6501.c b/drivers/staging/comedi/drivers/ni_usb6501.c index 360e86a19fe3..311632004f08 100644 --- a/drivers/staging/comedi/drivers/ni_usb6501.c +++ b/drivers/staging/comedi/drivers/ni_usb6501.c @@ -144,6 +144,10 @@ static const u8 READ_COUNTER_RESPONSE[] = {0x00, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00}; +/* Largest supported packets */ +static const size_t TX_MAX_SIZE = sizeof(SET_PORT_DIR_REQUEST); +static const size_t RX_MAX_SIZE = sizeof(READ_PORT_RESPONSE); + enum commands { READ_PORT, WRITE_PORT, @@ -501,6 +505,12 @@ static int ni6501_find_endpoints(struct comedi_device *dev) if (!devpriv->ep_rx || !devpriv->ep_tx) return -ENODEV; + if (usb_endpoint_maxp(devpriv->ep_rx) < RX_MAX_SIZE) + return -ENODEV; + + if (usb_endpoint_maxp(devpriv->ep_tx) < TX_MAX_SIZE) + return -ENODEV; + return 0; } From 199acd8c110e3ae62833c24f632b0bb1c9f012a9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Oct 2021 13:45:30 +0200 Subject: [PATCH 11/18] comedi: vmk80xx: fix transfer-buffer overflows commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream. The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes. Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize. Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing. The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize. Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold Reviewed-by: Ian Abbott Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/vmk80xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 7956abcbae22..2787757cf75f 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -90,6 +90,8 @@ enum { #define IC3_VERSION BIT(0) #define IC6_VERSION BIT(1) +#define MIN_BUF_SIZE 64 + enum vmk80xx_model { VMK8055_MODEL, VMK8061_MODEL @@ -678,12 +680,12 @@ static int vmk80xx_alloc_usb_buffers(struct comedi_device *dev) struct vmk80xx_private *devpriv = dev->private; size_t size; - size = usb_endpoint_maxp(devpriv->ep_rx); + size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE); devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL); if (!devpriv->usb_rx_buf) return -ENOMEM; - size = usb_endpoint_maxp(devpriv->ep_tx); + size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE); devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL); if (!devpriv->usb_tx_buf) return -ENOMEM; From 1ae4715121a57bc6fa29fd992127b01907f2f993 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Oct 2021 13:45:31 +0200 Subject: [PATCH 12/18] comedi: vmk80xx: fix bulk-buffer overflow commit 78cdfd62bd54af615fba9e3ca1ba35de39d3871d upstream. The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers. Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold Reviewed-by: Ian Abbott Link: https://lore.kernel.org/r/20211025114532.4599-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/vmk80xx.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 2787757cf75f..78c0383b8088 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -159,22 +159,20 @@ static void vmk80xx_do_bulk_msg(struct comedi_device *dev) __u8 rx_addr; unsigned int tx_pipe; unsigned int rx_pipe; - size_t size; + size_t tx_size; + size_t rx_size; tx_addr = devpriv->ep_tx->bEndpointAddress; rx_addr = devpriv->ep_rx->bEndpointAddress; tx_pipe = usb_sndbulkpipe(usb, tx_addr); rx_pipe = usb_rcvbulkpipe(usb, rx_addr); - - /* - * The max packet size attributes of the K8061 - * input/output endpoints are identical - */ - size = usb_endpoint_maxp(devpriv->ep_tx); + tx_size = usb_endpoint_maxp(devpriv->ep_tx); + rx_size = usb_endpoint_maxp(devpriv->ep_rx); usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, - size, NULL, devpriv->ep_tx->bInterval); - usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, size, NULL, HZ * 10); + tx_size, NULL, devpriv->ep_tx->bInterval); + + usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10); } static int vmk80xx_read_packet(struct comedi_device *dev) From 88a252ff782ce9683ef8657d52c8fd913b2e1488 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Oct 2021 13:45:32 +0200 Subject: [PATCH 13/18] comedi: vmk80xx: fix bulk and interrupt message timeouts commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream. USB bulk and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Note that the bulk-out transfer timeout was set to the endpoint bInterval value, which should be ignored for bulk endpoints and is typically set to zero. This meant that a failing bulk-out transfer would never time out. Assume that the 10 second timeout used for all other transfers is more than enough also for the bulk-out endpoint. Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold Reviewed-by: Ian Abbott Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/vmk80xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 78c0383b8088..7769eadfaf61 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -91,6 +91,7 @@ enum { #define IC6_VERSION BIT(1) #define MIN_BUF_SIZE 64 +#define PACKET_TIMEOUT 10000 /* ms */ enum vmk80xx_model { VMK8055_MODEL, @@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct comedi_device *dev) tx_size = usb_endpoint_maxp(devpriv->ep_tx); rx_size = usb_endpoint_maxp(devpriv->ep_rx); - usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, - tx_size, NULL, devpriv->ep_tx->bInterval); + usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL, + PACKET_TIMEOUT); - usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10); + usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, + PACKET_TIMEOUT); } static int vmk80xx_read_packet(struct comedi_device *dev) @@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct comedi_device *dev) pipe = usb_rcvintpipe(usb, ep->bEndpointAddress); return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf, usb_endpoint_maxp(ep), NULL, - HZ * 10); + PACKET_TIMEOUT); } static int vmk80xx_write_packet(struct comedi_device *dev, int cmd) @@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct comedi_device *dev, int cmd) pipe = usb_sndintpipe(usb, ep->bEndpointAddress); return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf, usb_endpoint_maxp(ep), NULL, - HZ * 10); + PACKET_TIMEOUT); } static int vmk80xx_reset_device(struct comedi_device *dev) From f66258cb60e4abbc71211adb46996838a768f690 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Oct 2021 14:09:10 +0200 Subject: [PATCH 14/18] staging: r8712u: fix control-message timeout commit ce4940525f36ffdcf4fa623bcedab9c2a6db893a upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable@vger.kernel.org # 2.6.37 Acked-by: Larry Finger Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211025120910.6339-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_ops_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8712/usb_ops_linux.c b/drivers/staging/rtl8712/usb_ops_linux.c index 9d290bc2fdb7..2202a0caa252 100644 --- a/drivers/staging/rtl8712/usb_ops_linux.c +++ b/drivers/staging/rtl8712/usb_ops_linux.c @@ -493,7 +493,7 @@ int r8712_usbctrl_vendorreq(struct intf_priv *pintfpriv, u8 request, u16 value, memcpy(pIo_buf, pdata, len); } status = usb_control_msg(udev, pipe, request, reqtype, value, index, - pIo_buf, len, HZ / 2); + pIo_buf, len, 500); if (status > 0) { /* Success this control transfer. */ if (requesttype == 0x01) { /* For Control read transfer, we have to copy the read From 6c382b63658ed8feb7d092c7a45199c665ffc018 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Oct 2021 14:09:09 +0200 Subject: [PATCH 15/18] staging: rtl8192u: fix control-message timeouts commit 4cfa36d312d6789448b59a7aae770ac8425017a3 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Cc: stable@vger.kernel.org # 2.6.33 Acked-by: Larry Finger Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211025120910.6339-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r8192U_core.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index e739d1979c87..6f65a9c9d6cf 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -236,7 +236,7 @@ int write_nic_byte_E(struct net_device *dev, int indx, u8 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, - indx | 0xfe00, 0, usbdata, 1, HZ / 2); + indx | 0xfe00, 0, usbdata, 1, 500); kfree(usbdata); if (status < 0) { @@ -258,7 +258,7 @@ int read_nic_byte_E(struct net_device *dev, int indx, u8 *data) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - indx | 0xfe00, 0, usbdata, 1, HZ / 2); + indx | 0xfe00, 0, usbdata, 1, 500); *data = *usbdata; kfree(usbdata); @@ -286,7 +286,7 @@ int write_nic_byte(struct net_device *dev, int indx, u8 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 1, HZ / 2); + usbdata, 1, 500); kfree(usbdata); if (status < 0) { @@ -313,7 +313,7 @@ int write_nic_word(struct net_device *dev, int indx, u16 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 2, HZ / 2); + usbdata, 2, 500); kfree(usbdata); if (status < 0) { @@ -340,7 +340,7 @@ int write_nic_dword(struct net_device *dev, int indx, u32 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 4, HZ / 2); + usbdata, 4, 500); kfree(usbdata); @@ -367,7 +367,7 @@ int read_nic_byte(struct net_device *dev, int indx, u8 *data) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 1, HZ / 2); + usbdata, 1, 500); *data = *usbdata; kfree(usbdata); @@ -394,7 +394,7 @@ int read_nic_word(struct net_device *dev, int indx, u16 *data) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 2, HZ / 2); + usbdata, 2, 500); *data = *usbdata; kfree(usbdata); @@ -418,7 +418,7 @@ static int read_nic_word_E(struct net_device *dev, int indx, u16 *data) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - indx | 0xfe00, 0, usbdata, 2, HZ / 2); + indx | 0xfe00, 0, usbdata, 2, 500); *data = *usbdata; kfree(usbdata); @@ -444,7 +444,7 @@ int read_nic_dword(struct net_device *dev, int indx, u32 *data) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 4, HZ / 2); + usbdata, 4, 500); *data = *usbdata; kfree(usbdata); From 64e6632ab4c11dde13083f9529d4fa9a9e919ae4 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 10 Aug 2021 19:09:55 +0200 Subject: [PATCH 16/18] media: staging/intel-ipu3: css: Fix wrong size comparison imgu_css_fw_init commit a44f9d6f9dc1fb314a3f1ed2dcd4fbbcc3d9f892 upstream. There is a wrong comparison of the total size of the loaded firmware css->fw->size with the size of a pointer to struct imgu_fw_header. Turn binary_header into a flexible-array member[1][2], use the struct_size() helper and fix the wrong size comparison. Notice that the loaded firmware needs to contain at least one 'struct imgu_fw_info' item in the binary_header[] array. It's also worth mentioning that "css->fw->size < struct_size(css->fwp, binary_header, 1)" with binary_header declared as a flexible-array member is equivalent to "css->fw->size < sizeof(struct imgu_fw_header)" with binary_header declared as a one-element array (as in the original code). The replacement of the one-element array with a flexible-array member also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Fixes: 09d290f0ba21 ("media: staging/intel-ipu3: css: Add support for firmware management") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/ipu3/ipu3-css-fw.c | 7 +++---- drivers/staging/media/ipu3/ipu3-css-fw.h | 2 +- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/staging/media/ipu3/ipu3-css-fw.c b/drivers/staging/media/ipu3/ipu3-css-fw.c index 45aff76198e2..981693eed815 100644 --- a/drivers/staging/media/ipu3/ipu3-css-fw.c +++ b/drivers/staging/media/ipu3/ipu3-css-fw.c @@ -124,12 +124,11 @@ int imgu_css_fw_init(struct imgu_css *css) /* Check and display fw header info */ css->fwp = (struct imgu_fw_header *)css->fw->data; - if (css->fw->size < sizeof(struct imgu_fw_header *) || + if (css->fw->size < struct_size(css->fwp, binary_header, 1) || css->fwp->file_header.h_size != sizeof(struct imgu_fw_bi_file_h)) goto bad_fw; - if (sizeof(struct imgu_fw_bi_file_h) + - css->fwp->file_header.binary_nr * sizeof(struct imgu_fw_info) > - css->fw->size) + if (struct_size(css->fwp, binary_header, + css->fwp->file_header.binary_nr) > css->fw->size) goto bad_fw; dev_info(dev, "loaded firmware version %.64s, %u binaries, %zu bytes\n", diff --git a/drivers/staging/media/ipu3/ipu3-css-fw.h b/drivers/staging/media/ipu3/ipu3-css-fw.h index 79ffa7045139..650fd25fc79e 100644 --- a/drivers/staging/media/ipu3/ipu3-css-fw.h +++ b/drivers/staging/media/ipu3/ipu3-css-fw.h @@ -170,7 +170,7 @@ struct imgu_fw_bi_file_h { struct imgu_fw_header { struct imgu_fw_bi_file_h file_header; - struct imgu_fw_info binary_header[1]; /* binary_nr items */ + struct imgu_fw_info binary_header[]; /* binary_nr items */ }; /******************* Firmware functions *******************/ From abc49cc45d0ada0b9d147f2873ef439ba5c7e2b7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Oct 2021 14:05:22 +0200 Subject: [PATCH 17/18] rsi: fix control-message timeout commit 541fd20c3ce5b0bc39f0c6a52414b6b92416831c upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Johan Hovold Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211025120522.6045-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/rsi/rsi_91x_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index e8aa3d4bda88..1e5a2a0cc670 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -61,7 +61,7 @@ static int rsi_usb_card_write(struct rsi_hw *adapter, (void *)seg, (int)len, &transfer, - HZ * 5); + USB_CTRL_SET_TIMEOUT); if (status < 0) { rsi_dbg(ERR_ZONE, From 5915b0ea674673d13d2755f7e7f843fe286d85ec Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 12 Nov 2021 14:43:05 +0100 Subject: [PATCH 18/18] Linux 5.4.159 Link: https://lore.kernel.org/r/20211110182002.206203228@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Shuah Khan Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index cef1d2704c41..602b5167dacd 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 158 +SUBLEVEL = 159 EXTRAVERSION = NAME = Kleptomaniac Octopus