i.MX drivers change for 5.2:

- A series from Aisheng to generalize the SCU powerdomain driver
    for easier adding new SCU based platforms like imx8qm.
  - Add a generic i.MX8 SoC driver for reporting SoC and platform
    information.
  - Replace explicit polling loop with a call to regmap_read_poll_timeout()
    for gpcv2 driver to avoid code repetition.
  - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
    code a bit.
  - Add general IRQ support for imx-scu driver, so that interrupt of
    device like RTC, thermal and watchdog can be handled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcvWKIAAoJEFBXWFqHsHzOeCQH/j/lgujJU9RnyY2CFTelMyad
 uTKEUgk2vvbswBdFMaS7xAvbni24GOxUdKUYJul0oz5jBnK4wKmf6VY7TYMQ8Qht
 hsdp0dsHHgI1qysOiOSxidhIN/2aXFl/hSoF8FT/9m0qXqnmvoHGFQT0YoMGwznS
 +7tHuUt5cjUG/r5DMM6GOzI/w6K1of6RGGsLWvYeuy7OeoDhI2Gl5gtK+qxik98J
 qC9UM64jO93rmXebJuG+9ZNJ0FFATrBMboMB3a7rA3t9RvkAFKEuVRp3USPuj1ek
 TxNusTtkQwCeujy9QZu/eB/oUrScEbzJuw+sp0l69C9T2D44ucZLFbHixnwbigM=
 =1wlN
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers change for 5.2:
 - A series from Aisheng to generalize the SCU powerdomain driver
   for easier adding new SCU based platforms like imx8qm.
 - Add a generic i.MX8 SoC driver for reporting SoC and platform
   information.
 - Replace explicit polling loop with a call to regmap_read_poll_timeout()
   for gpcv2 driver to avoid code repetition.
 - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
   code a bit.
 - Add general IRQ support for imx-scu driver, so that interrupt of
   device like RTC, thermal and watchdog can be handled.

* tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: Add generic i.MX8 SoC driver
  firmware: imx: enable imx scu general irq function
  soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code
  soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code
  firmware: imx: scu-pd: decouple the SS information from domain names
  firmware: imx: scu-pd: add specifying the base of domain name index support
  firmware: imx: scu-pd: use bool to set postfix
  soc: imx: gpcv2: Make use of regmap_read_poll_timeout()

Signed-off-by: Olof Johansson <[email protected]>

drivers/soc/imx/Makefile

@@ -1,2 +1,3 @@
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
+obj-$(CONFIG_ARCH_MXC) += soc-imx8.o

drivers/soc/imx/gpc.c

@@ -406,7 +406,6 @@ static int imx_gpc_probe(struct platform_device *pdev)
 	const struct imx_gpc_dt_data *of_id_data = of_id->data;
 	struct device_node *pgc_node;
 	struct regmap *regmap;
-	struct resource *res;
 	void __iomem *base;
 	int ret;
 
@@ -417,8 +416,7 @@ static int imx_gpc_probe(struct platform_device *pdev)
 	    !pgc_node)
 		return 0;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 

drivers/soc/imx/gpcv2.c

@@ -136,8 +136,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
 		GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
 	const bool enable_power_control = !on;
 	const bool has_regulator = !IS_ERR(domain->regulator);
-	unsigned long deadline;
 	int i, ret = 0;
+	u32 pxx_req;
 
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, domain->bits.map);
@@ -169,30 +169,19 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
 	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
 	 * for PUP_REQ/PDN_REQ bit to be cleared
 	 */
-	deadline = jiffies + msecs_to_jiffies(1);
-	while (true) {
-		u32 pxx_req;
-
-		regmap_read(domain->regmap, offset, &pxx_req);
-
-		if (!(pxx_req & domain->bits.pxx))
-			break;
-
-		if (time_after(jiffies, deadline)) {
-			dev_err(domain->dev, "falied to command PGC\n");
-			ret = -ETIMEDOUT;
-			/*
-			 * If we were in a process of enabling a
-			 * domain and failed we might as well disable
-			 * the regulator we just enabled. And if it
-			 * was the opposite situation and we failed to
-			 * power down -- keep the regulator on
-			 */
-			on = !on;
-			break;
-		}
-
-		cpu_relax();
+	ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
+				       !(pxx_req & domain->bits.pxx),
+				       0, USEC_PER_MSEC);
+	if (ret) {
+		dev_err(domain->dev, "failed to command PGC\n");
+		/*
+		 * If we were in a process of enabling a
+		 * domain and failed we might as well disable
+		 * the regulator we just enabled. And if it
+		 * was the opposite situation and we failed to
+		 * power down -- keep the regulator on
+		 */
+		on = !on;
 	}
 
 	if (enable_power_control)
@@ -574,7 +563,6 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *pgc_np, *np;
 	struct regmap *regmap;
-	struct resource *res;
 	void __iomem *base;
 	int ret;
 
@@ -584,8 +572,7 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	res  = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 

drivers/soc/imx/soc-imx8.c

@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#define REV_B1				0x21
+
+#define IMX8MQ_SW_INFO_B1		0x40
+#define IMX8MQ_SW_MAGIC_B1		0xff0055aa
+
+struct imx8_soc_data {
+	char *name;
+	u32 (*soc_revision)(void);
+};
+
+static u32 __init imx8mq_soc_revision(void)
+{
+	struct device_node *np;
+	void __iomem *ocotp_base;
+	u32 magic;
+	u32 rev = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp");
+	if (!np)
+		goto out;
+
+	ocotp_base = of_iomap(np, 0);
+	WARN_ON(!ocotp_base);
+
+	magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1);
+	if (magic == IMX8MQ_SW_MAGIC_B1)
+		rev = REV_B1;
+
+	iounmap(ocotp_base);
+
+out:
+	of_node_put(np);
+	return rev;
+}
+
+static const struct imx8_soc_data imx8mq_soc_data = {
+	.name = "i.MX8MQ",
+	.soc_revision = imx8mq_soc_revision,
+};
+
+static const struct of_device_id imx8_soc_match[] = {
+	{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
+	{ }
+};
+
+#define imx8_revision(soc_rev) \
+	soc_rev ? \
+	kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf,  soc_rev & 0xf) : \
+	"unknown"
+
+static int __init imx8_soc_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *root;
+	const struct of_device_id *id;
+	u32 soc_rev = 0;
+	const struct imx8_soc_data *data;
+	int ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENODEV;
+
+	soc_dev_attr->family = "Freescale i.MX";
+
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+	if (ret)
+		goto free_soc;
+
+	id = of_match_node(imx8_soc_match, root);
+	if (!id)
+		goto free_soc;
+
+	of_node_put(root);
+
+	data = id->data;
+	if (data) {
+		soc_dev_attr->soc_id = data->name;
+		if (data->soc_revision)
+			soc_rev = data->soc_revision();
+	}
+
+	soc_dev_attr->revision = imx8_revision(soc_rev);
+	if (!soc_dev_attr->revision)
+		goto free_soc;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		goto free_rev;
+
+	return 0;
+
+free_rev:
+	kfree(soc_dev_attr->revision);
+free_soc:
+	kfree(soc_dev_attr);
+	of_node_put(root);
+	return -ENODEV;
+}
+device_initcall(imx8_soc_init);