fw-api: CL 24140579 - update fw common interface files

Change-Id: Iab6d61dd4d9db60128a9cd32ab883693d9b7d01a
WMI: add radar_flags TLV in PDEV_DFS_RADAR_DETECTION_EVENT msg
CRs-Fixed: 2262693
This commit is contained in:
spuligil 2023-08-10 06:02:15 -07:00 • committed by Rahul Choudhary
commit f9d60b0c6b
4 changed files with 43 additions and 3 deletions

View file

@ -640,6 +640,7 @@ typedef enum {
WMI_SERVICE_DISABLE_WDS_PEER_MAP_UNMAP_EVENT_SUPPORT = 387, /* Indicate FW support to disable wds peer map/unmap events */
WMI_SERVICE_PDEV_WSI_STATS_INFO_SUPPORT = 388, /* Support for WSI Stats Info. */
WMI_SERVICE_MULTIPLE_RF_PATH_SOC_SUPPORT = 389, /* Indicates FW supports Multiple RF Path on SOC Level */
WMI_SERVICE_RADAR_FLAGS_SUPPORT = 390, /* Indicates FW supports radar flags, such as full bandwidth need put to NOL */
WMI_MAX_EXT2_SERVICE

View file

@ -1398,6 +1398,7 @@ typedef enum {
WMITLV_TAG_STRUC_wmi_pdev_wsi_stats_info_cmd_fixed_param,
WMITLV_TAG_STRUC_wmi_enhanced_aoa_caps_param,
WMITLV_TAG_STRUC_wmi_enhanced_aoa_per_band_caps_param,
WMITLV_TAG_STRUC_WMI_RADAR_FLAGS,
} WMITLV_TAG_ID;
/*
* IMPORTANT: Please add _ALL_ WMI Commands Here.
@ -6255,7 +6256,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PEER_OPER_MODE_CHANGE_EVENTID);
WMITLV_CREATE_PARAM_STRUC(WMI_DFS_RADAR_EVENTID);
#define WMITLV_TABLE_WMI_PDEV_DFS_RADAR_DETECTION_EVENTID(id,op,buf,len) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_dfs_radar_detection_event_fixed_param, wmi_pdev_dfs_radar_detection_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_dfs_radar_detection_event_fixed_param, wmi_pdev_dfs_radar_detection_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_RADAR_FLAGS, radar_flags, WMITLV_SIZE_VAR)
WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_DFS_RADAR_DETECTION_EVENTID);
#define WMITLV_TABLE_WMI_VDEV_ADFS_OCAC_COMPLETE_EVENTID(id,op,buf,len) \

View file

@ -4591,7 +4591,15 @@ typedef struct {
* Refer to the below definitions of the
* WMI_RSRC_CFG_HOST_SERVICE_FLAG_BANG_RADAR_320M_SUPPORT_GET
* and _SET macros.
* Bits 31:14 - Reserved
* Bit 14
* This bit will be set when host wants to enable/disable
* full BW NOL feature.
* When set to 1: Enable full BW NOL feature.
* When set to 0: Disable the full BW NOL feature.
* Refer to the below definitions of the
* WMI_RSRC_CFG_HOST_SERVICE_FLAG_RADAR_FLAGS_FULL_BW_NOL_GET
* and _SET macros.
* Bits 31:15 - Reserved
*/
A_UINT32 host_service_flags;
@ -5034,6 +5042,11 @@ typedef struct {
#define WMI_RSRC_CFG_HOST_SERVICE_FLAG_BANG_RADAR_320M_SUPPORT_SET(host_service_flags, val) \
WMI_SET_BITS(host_service_flags, 13, 1, val)
#define WMI_RSRC_CFG_HOST_SERVICE_FLAG_RADAR_FLAGS_FULL_BW_NOL_GET(host_service_flags) \
WMI_GET_BITS(host_service_flags, 14, 1)
#define WMI_RSRC_CFG_HOST_SERVICE_FLAG_RADAR_FLAGS_FULL_BW_NOL_SET(host_service_flags, val) \
WMI_SET_BITS(host_service_flags, 14, 1, val)
#define WMI_RSRC_CFG_CARRIER_CFG_CHARTER_ENABLE_GET(carrier_config) \
WMI_GET_BITS(carrier_config, 0, 1)
@ -25558,6 +25571,30 @@ typedef struct {
A_INT32 sidx; /* segment index (where was the radar within the channel) */
} wmi_pdev_dfs_radar_detection_event_fixed_param;
typedef struct {
A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_RADAR_FLAGS */
/*
* Bit 0:
* 0 - need check sub channel marking
* 1 - full bandwidth need put to NOL
* Refer to WMI_RADAR_FLAGS_FULL_BW_NOL_GET and _SET macros
* [1:31] reserved
*/
A_UINT32 flags;
} WMI_RADAR_FLAGS;
#define WMI_RADAR_FLAGS_FULL_BW_NOL_BITPOS 0
#define WMI_RADAR_FLAGS_FULL_BW_NOL_NUM_BITS 1
#define WMI_RADAR_FLAGS_FULL_BW_NOL_GET(flag) \
WMI_GET_BITS(flag, \
WMI_RADAR_FLAGS_FULL_BW_NOL_BITPOS, \
WMI_RADAR_FLAGS_FULL_BW_NOL_NUM_BITS)
#define WMI_RADAR_FLAGS_FULL_BW_NOL_SET(flag, val) \
WMI_GET_BITS(flag, \
WMI_RADAR_FLAGS_FULL_BW_NOL_BITPOS, \
WMI_RADAR_FLAGS_FULL_BW_NOL_NUM_BITS, val)
typedef enum {
OCAC_COMPLETE = 0,
OCAC_ABORT,

View file

@ -37,7 +37,7 @@
#define __WMI_VER_MINOR_ 0
/** WMI revision number has to be incremented when there is a
* change that may or may not break compatibility. */
#define __WMI_REVISION_ 1378
#define __WMI_REVISION_ 1379
/** The Version Namespace should not be normally changed. Only
* host and firmware of the same WMI namespace will work