ARM: SoC driver updates for 4.16

A number of new drivers get added this time, along with many low-priority
 bugfixes. The most interesting changes by subsystem are:
 
 bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC types
   - The TI OMAP sysc driver now supports updated DT bindings
 
 memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there
 
 SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP
 
 reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes
 
 tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with
     the TEE is added
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/
 b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8
 xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy
 /PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I//
 68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa
 5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum
 aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd
 +ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl
 EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h
 zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco
 0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis
 IDVC/QWkb3u85wK20Vc1
 =yz0k
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...

Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt

@@ -17,21 +17,23 @@ Further, syscon nodes that map platform-specific registers used for general
 system control is required:
 
     - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
-    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-cpu-biu-ctrl",
+		  "brcm,brcmstb-cpu-biu-ctrl",
+		  "syscon"
     - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
 
-hif-cpubiuctrl node
+cpu-biu-ctrl node
 -------------------
-SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
-(BIU) block which controls and interfaces the CPU complex to the different
-Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
-offers a feature called Write Pairing which consists in collapsing two adjacent
-cache lines into a single (bursted) write transaction towards the memory
-controller (MEMC) to maximize write bandwidth.
+SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a
+specific Bus Interface Unit (BIU) block which controls and interfaces the CPU
+complex to the different Memory Controller Ports (MCP), one per memory
+controller (MEMC). This BIU block offers a feature called Write Pairing which
+consists in collapsing two adjacent cache lines into a single (bursted) write
+transaction towards the memory controller (MEMC) to maximize write bandwidth.
 
 Required properties:
 
-    - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
+    - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"
 
 Optional properties:
 
@@ -52,7 +54,7 @@ example:
         };
 
         hif_cpubiuctrl: syscon@3e2400 {
-            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+            compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon";
             reg = <0x3e2400 0x5b4>;
             brcm,write-pairing;
         };

Documentation/devicetree/bindings/arm/cpus.txt

@@ -169,6 +169,7 @@ described below.
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
 			    "brcm,brahma-b15"
+			    "brcm,brahma-b53"
 			    "brcm,vulcan"
 			    "cavium,thunder"
 			    "cavium,thunder2"

Documentation/devicetree/bindings/bus/ti-sysc.txt

@@ -19,6 +19,7 @@ Required standard properties:
 
 - compatible	shall be one of the following generic types:
 
+		"ti,sysc"
 		"ti,sysc-omap2"
 		"ti,sysc-omap4"
 		"ti,sysc-omap4-simple"

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -23,6 +23,13 @@ Required properties:
   the value shall be "emif<n>" where <n> is the number of the EMIF
   instance with base 1.
 
+Required only for "ti,emif-am3352" and "ti,emif-am4372":
+- sram			: Phandles for generic sram driver nodes,
+  first should be type 'protect-exec' for the driver to use to copy
+  and run PM functions, second should be regular pool to be used for
+  data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+  for more details.
+
 Optional properties:
 - cs1-used		: Have this property if CS1 of this EMIF
   instance has a memory part attached to it. If there is a memory
@@ -44,7 +51,7 @@ Optional properties:
 - hw-caps-temp-alert	: Have this property if the controller
   has capability for generating SDRAM temperature alerts
 
-Example:
+-Examples:
 
 emif1: emif@4c000000 {
 	compatible	= "ti,emif-4d";
@@ -56,3 +63,11 @@ emif1: emif@4c000000 {
 	hw-caps-ll-interface;
 	hw-caps-temp-alert;
 };
+
+/* From am33xx.dtsi */
+emif: emif@4c000000 {
+        compatible = "ti,emif-am3352";
+        reg =   <0x4C000000 0x1000>;
+        sram = <&pm_sram_code
+                &pm_sram_data>;
+};

Documentation/devicetree/bindings/power/fsl,imx-gpc.txt

@@ -9,6 +9,7 @@ Required properties:
   - fsl,imx6q-gpc
   - fsl,imx6qp-gpc
   - fsl,imx6sl-gpc
+  - fsl,imx6sx-gpc
 - reg: should be register base and length as documented in the
   datasheet
 - interrupts: Should contain one interrupt specifier for the GPC interrupt
@@ -29,6 +30,8 @@ Required properties:
   PU_DOMAIN      1
   The following additional DOMAIN_INDEX value is valid for i.MX6SL:
   DISPLAY_DOMAIN 2
+  The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+  PCI_DOMAIN     3
 
 - #power-domain-cells: Should be 0
 

Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt

@@ -5,7 +5,8 @@ Please also refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset"
+- compatible: Should be "amlogic,meson8b-reset", "amlogic,meson-gxbb-reset" or
+	"amlogic,meson-axg-reset".
 - reg: should contain the register address base
 - #reset-cells: 1, see below
 

Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt

@@ -17,9 +17,15 @@ processor ID) and a string identifier.
 	Value type: <prop-encoded-array>
 	Definition: one entry specifying the smp2p notification interrupt
 
-- qcom,ipc:
+- mboxes:
 	Usage: required
 	Value type: <prop-encoded-array>
+	Definition: reference to the associated doorbell in APCS, as described
+		    in mailbox/mailbox.txt
+
+- qcom,ipc:
+	Usage: required, unless mboxes is specified
+	Value type: <prop-encoded-array>
 	Definition: three entries specifying the outgoing ipc bit used for
 		    signaling the remote end of the smp2p edge:
 		    - phandle to a syscon node representing the apcs registers

Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt

@@ -0,0 +1,31 @@
+LogicoreIP designed compatible with Xilinx ZYNQ family.
+-------------------------------------------------------
+
+General concept
+---------------
+
+LogicoreIP design to provide the isolation between processing system
+and programmable logic. Also provides the list of register set to configure
+the frequency.
+
+Required properties:
+- compatible: shall be one of:
+	"xlnx,vcu"
+	"xlnx,vcu-logicoreip-1.0"
+- reg, reg-names: There are two sets of registers need to provide.
+	1. vcu slcr
+	2. Logicore
+	reg-names should contain name for the each register sequence.
+- clocks: phandle for aclk and pll_ref clocksource
+- clock-names: The identification string, "aclk", is always required for
+   the axi clock. "pll_ref" is required for pll.
+Example:
+
+	xlnx_vcu: vcu@a0040000 {
+		compatible = "xlnx,vcu-logicoreip-1.0";
+		reg = <0x0 0xa0040000 0x0 0x1000>,
+			 <0x0 0xa0041000 0x0 0x1000>;
+		reg-names = "vcu_slcr", "logicore";
+		clocks = <&si570_1>, <&clkc 71>;
+		clock-names = "pll_ref", "aclk";
+	};