It doesn't record current scan request and won't cleanup being
process scan request. In some Rome platform, host driver just load one
time, scan request status mismatch to cfg80211 if didn't cleanup scan
request, and then cause crash.
Change-Id: I000db80bdf5175775f2415130ee3a2974aefa4ea
CRs-Fixed: 2111330
As part of configure default filters over suspend code
changes wlan module loading broken.
Fix the loading issue by adding the newly added files
to Kbuild.
CRs-Fixed: 2017259
Change-Id: Ib33efa8f7f5e2ca8d9734181df94f70557e9f9cd
In suspend mode multicast, broadcast packets wakes up host,
this leads to higher power consumption.
Add support to configure the IPv6/IPv4 multicast, IPv4 broadcast, XID,
STP, DTP/LLC/CDP packet filters based on ini bit map param, before the
device goes to suspend mode and clear the same filters in resume.
CRs-Fixed: 2011442
Change-Id: Ib355459132086902ba008f2abd17415a8f569b41
In Rome platform, it use invalid radio id in FW event
WMI_RADIO_LINK_STATS_EVENTID and cause crash. So check
radio id when handling this event.
Change-Id: Iadf61fbde53f80f1081da9a386cf13f0cce69e3c
CRs-Fixed: 2123782
when unloading driver, there is possible that the driver_status
has been DRIVER_MODULES_CLOSED, then NETDEV_GOING_DOWN is received,
which will cause assert in qdf_mutex_acquire as lock has been
destoryed.
Change-Id: Ic7e26dc1eb9a40a2462b041b0f3b84452e448cfd
CRs-Fixed: 2126832
Number of profile data from firmware cannot be trusted. Check for
number of entries against the metadata in TLV header.
Change-Id: I0d8078f623a97e33ee1689398c291be75fe9a62a
CRs-Fixed: 2119391
Pending_event memory is dynamically allocated after driver loaded
but freed up only when driver unloading.
Fix to free pending_event memory when driver stop.
Change-Id: Ia748e311fc77fc99e193230910fccd7bc9b4f5a9
CRs-Fixed: 2126695
If SAP has no channel left to move then it will issue stop bss. In this
scenario, SAP is not cleaning up its entry from policy manager table
which causes stale entry left over in table.
Fix this situation by stopping the bss successfully and deleting entry
from policy manager table.
Change-Id: I7c7d305936fe16b0deebb9b7a67f7753cbf243e6
CRs-Fixed: 2112932
Release the NSS update request from the serialization active
command list in case the request fails.
Change-Id: Id6bfee6f510132bacdc69773c8aba90be43aa813
CRs-Fixed: 2112932
SoftAP start fails during station connection is in progress and the flag
update_beacon is not set. Also allow beacon/probe resp update in the middle
of p2p connection.
Change-Id: I13d89b6b8b51f999ff317d1f55dc3fcf48bdd422
CRs-Fixed: 2108186
This reverts Change-Id: I1887aab39d2fa13cc8a900164d2aa6d489464e42
Driver is no more acquiring qdf_conc_list_lock before calling
cds_get_pcl(). SME active queue will serialize connection request and
bss start commands.
Change-Id: I98066b8f1e756ae930ea97be6f8c6e6de244662d
CRs-Fixed: 2108186
For data stall continuous HDD tx timeout count of five
post HOST TX time out data stall event to handle it in
data detection module.
Change-Id: Ic6cf5e62f711cef5919a4a5e85e4232c622c04bb
CRs-Fixed: 2094393
Add sanity check for vdev id in wma_vdev_start_resp_handler() to prevent
out of bound memory access.
Change-Id: Ia4e18e8e322142928c41dfa88b874ff017727266
CRs-Fixed: 2120424
There is a possibility of double start of inactivity timer if iff_up
(hdd_open) happens while probe/remove/reinit is still going on.
To mitigate this issue, on iff_up, start inactivity after acquiring
hdd_init_deinit_lock, which make sure probe/remove/reinit are
completed, and thereby inactivity timer is stopped.
Change-Id: I2417215380e318a8410a2d25eabf82f353a26c4f
CRs-Fixed: 2125494
There can be deadlock on iff_up on anyone of mutex's like
init_deinit_lock, iface_change_lock. To catch what caused the
deadlock start the inactivity timer to root-cause the issue
CRs-Fixed: 2120569
Change-Id: I830cc4127a9c0691ee44a5e2c56c871471d638db
qcacld-2.0 to qcacld-3.0 Propagation.
Wifi OFF/ON is needed to update the gEnableModuleDTIM ini param.
Add private ioctl to configure modulated DTIM at runtime.
CRs-Fixed: 2002662
Change-Id: I28be432da775a9aa026cd702c63dee5666260d33
Fine tune the scan rest time configuration parameters,
gRoamRestTimeMin and gNeighborScanTimerPeriod to 50ms and
100ms respectively for better power efficiency.
Change-Id: Ia6edb87dbb0abf4771613a028d711f4f7a4e0f41
CRs-Fixed: 2120683
Some data path code change didn't consider SDIO code path, so
introducing some build error for SDIO driver. Fix them in one
submission to enable ACI
Change-Id: I3d1b81c57a8ae854f18db3eccb546b7b552899b7
CRs-Fixed: 2033757
