Do following cleanup on fastpath code changes:
1) Do not reap off Tx HIF buffers in Rx handling, instead handle
reaping in Tx fastpath itself.
2) In ce_per_engine_service_fast check for more Rx packets after
packet processing.
3) Make stub functions as static inline for non-fastpath enabled case.
Change-Id: If07c4344a424ce13b94128bf28931a24255b661a
CRs-Fixed: 987182
With dedicated CE for Rx and Tx completion HTT messages, skip processing
in Host Target Communication layer.
Do special handling in HIF-CE and HTT layer, this optimization results
in 3-4% CPU utilization gain.
Change-Id: I400148a0e24ac62dd09e2a95d5f35d94d83fe2df
CRs-Fixed: 987182
Make changes so that LRO and FastPath can check whether a
given CE is a datapath RX CE. This is done through new
flags in CE_state which indicate whether or not a given
CE is a htt_[tr]rx CE.
Also add support to enable multi-queue NAPI.
Note that the paths are not yet parallel-execution protected,
but this should be OK as all NAPI instances are processing
the same interrupt now and as such as serialized.
Acked-by: Orhan K AKYILDIZ <oka@qca.qualcomm.com>
Change-Id: I57125b3e1fbad0345b6e1f4ed25e71babaf4f520
CRs-Fixed: 982728
Bypass QMI for 8998 RUMI bring up as it doesn't support
QMI for now.
Increase regulatory timeout for slow RUMI setup.
Change-Id: Ie4d790a79aaa166731c876bdecf0f4f6970caae4
CRs-Fixed: 978953
qcacld-2.0 to qcacld-3.0 propagation
add a wmi command to enable/disable channel
avoidance report event from firmware
Change-Id: Ic84728b315b4729470238098a91ef6bb629b3f7b
CRs-Fixed: 865207
At present and going forward ESE and ESE_UPLOAD will be the
de-facto approach supporting ESE. Hence there is no need of two compile macros
FEATURE_WLAN_ESE and FEATURE_WLAN_ESE_UPLOAD.
Instead Remove FEATURE_WLAN_ESE_UPLOAD and Keep only FEATURE_WLAN_ESE.
Change-Id: If1a04e95211a0d639db7b60a57a6d5f215d26f4e
CRs-Fixed: 950762
Instead of using two different enums for setting adapter mode,
combined them to make only one set of enum.
Change-Id: Ie41244becec39fe1f5f24a721f5b24e137e7fd26
CRs-Fixed: 985273
Send channel switch request instead of performing SAP restart when
doing a MCC to SCC switch. This is controlled using the existing INI
item 'gWlanMccToSccSwitchMode'. The new value of '3' will perform
this channel change by sending (E)/CSA whereas the old value of '2'
can still be used to do a channel change by doing SAP restart.
Change-Id: I79e7317219503de0a9957940f3cf7a4e91c7a521
CRs-Fixed: 986202
qcacld-3.0 to qcacmn propagation
Enhanced mcast filtering for incoming packets that have
multicast IP but unicast mac
Change-Id: Id50d9130f050ec9a948fdba9931c88b9111bb6ad
CRs-Fixed: 865207
If HT SMPS is enabled and if the session supported NSS > 1
then include SMPS IE in the HT capabilities of the association
and the reassociation management frame.Enabling SMPS with an AP
whose capability is only 1x1 will result in association/reassociation
request being rejected or an unexpected behavior. Send SMPS force mode
to FW to trigger SMPS action frame only if SMPS is enabled in the
INI. For dynamic antenna switch, the chain mask manager will send
the SMPS action frames.
CRs-Fixed: 931250
Change-Id: Ifff2ef2c8790994a68e676b8bba2fb03c21370d4
qcacmn: Incremental Release 5.1.0.5GG
Matches with driver version 5.1.0.5GG
Equivalent to SU165 on qcacld-3.0
Change-Id: I70bd31342e1b97ab102ea5f06b29f8d306cb948a
CRs-Fixed: 688141
hif_disable_power_management is only defiend for PCI devices which is
causing compilation error for SNOC devices. Define empty definition of
hif_disable_power_management for SNOC devices.
Change-Id: I4da5e2346119626fd6478d3eb835bcb1ba9dd663
CRs-Fixed: 978810
hif_enable_power_management is only defiend for PCI devices which is
causing compilation error for SNOC devices. Define empty definition of
hif_enable_power_management for SNOC devices
Change-Id: If6a4de93d18e8c5ca2a67f43a0eae69e781efa68
CRs-Fixed: 978802
qcacld-2.0 to qcacmn propagation
In High dense environment roaming should be triggered early
at dense RSSI threshold which provide better throughput result.
Add support for dense roaming parameters to read from ini file
and send to FW with other roaming parameters
CRs-Fixed: 953579
Change-Id: Ia63bfdd1248b4507d988b019f07164a7c75566af
Add gtk offload enable/disable macros and use them
while copy keys and replay counter.
Change-Id: Ifdd776bc0c567d6c815ab5cb3eb212a43889b5a5
CRs-Fixed: 987362
Replace Linux return type with QDF_STATUS to have uniformity
across common wmi layer.
Change-Id: I74730602c6b20fb240182afd7c6e5ec6b3fcfd55
CRs-Fixed: 987362
Initial check-in of the data path converged APIs that
are currently only implemented by WIN.
Change-Id: I68bc403dc652b514bfcc27f1eac1e9c5ca27c8d8
CRs-Fixed: 993414
Remove the header files which are not in common project so that HTC
layer can be converged.
Change-Id: Iaf5869e1d739cc80dcc5b89a446f499527350e38
CRs-fixed: 982024
Clean up CDS related functions so that HTC layer can be converged.
Also add compilation flag for runtime PM APIs.
Change-Id: I4c4a06b4387c8cc3f9b41d0191f46d7fa1b0a0b4
CRs-fixed: 982024
There are two ways to enable/disable HTC credit flow control. One is
in HTC itself with a static variable. The other is from the modules
who want to establish HTC service (e.g. WMI or HTT) by sending the
request. Make sure credit flow control enable/disable can be safely
done by other modules so that HTC layer can be converged.
Change-Id: I169c1ac7b410a7c9e7203c174bf1f1ec8a07ca06
CRs-fixed: 982024
qcacld-2.0 to qcacld-3.0 propagation
Add prevent method to reset the Runtime PM state before driver
unload to ensure Runtime PM is recovered by driver load.
Change-Id: I5fccc345e5217d1a26c3c4f0cda1dca5ee71004c
CRs-Fixed: 899522
Bus power management requirements are different for different busses.
Add them to the bus opps table.
Change-Id: Ia5a2500dc2f1db3be2ddbbaea6a5969420ec0c51
CRs-Fixed: 978810 978802
In data path per packet logging is overwriting previous useful
logs. Use HDD data module ID for WMM per packet logging with
debug log level such that by defualt per packet WMM debug log
messages are not logged.
Change-Id: I64053a6d5048a14277e01f35fcb6e0bbf6ac42b9
CRs-Fixed: 969712
Non datapath modules use these APIs when they work with datapath
module data structures.
Change-Id: Ic257c6fc621820199b1691b8e62f7f7109237b01
CRs-Fixed: 993414
Add below changes:
1) Add peer handling functions.
2) Bring in the APIs under else(#else) part of compile time flags
QCA_SUPPORT_TXRX_LOCAL_PEER_ID, QCA_COMPUTE_TX_DELAY and
QCA_SUPPORT_TX_THROTTLE.
Change-Id: I08b101702a7d0d870e9fab9b8a3cc7cc19d3464f
CRs-Fixed: 993414
Initial check-in of the data path converged APIs that
are currently only implemented by MCL.
Change-Id: I8132aeef4631a8e2fb5e132126a0fc5292c96d12
CRs-Fixed: 993414
Fix compilation error since qdf_event is used without including
the appropriate header file.
Change-Id: Iecc2f4080f8cb699ada4892dd431d68df4a080ca
CRs-Fixed: 994652
Clean-up the data path folder to create an empty canvas which
should contain only the converged data path APIs.
Change-Id: I90002dc48ef1a2f8d11ab7064ec900fcd82c0fe9
CRs-Fixed: 993414
Rename hif_callbacks structure to hif_driver_state_callbacks and remove
get_monotonic callback and use qdf API to get monotonic time.
Remove following unwanted header files in the hif source files.
osdep.h, athdefs.h, a_types.h, osapi_linux.h.
Change-Id: Ib7a03cab1b056a33b39247989fa3dfca41c85f77
CRs-Fixed: 967765
Move tlv formation of wmi setup key installation commands from umac to
common wmi layer.
Change-Id: I51250a9b1b6bb5aed06657b9f88f4659430f4c74
CRs-Fixed: 987362
