This patch fixes unbalanced locking in ieee80211_get_buffered_bc
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
e039fa4a41 ("mac80211: move TX info into
skb->cb") misplaced code for setting hardware WEP keys. Move it back.
This fixes kernel panic in b43 if WEP is used and hardware encryption
is enabled.
Signed-off-by: Pavel Roskin <[email protected]>
Acked-by: Johannes Berg <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
In commit 2e92e6f2c5 ("mac80211: use rate
index in TX control") I forgot to initialise a few new variables to -1 which
means that the rate control algorithm is never triggered and 0 is used as
the only rate index, effectively fixing the transmit bitrate at the lowest
supported.
This patch adds the missing initialisation.
Signed-off-by: Johannes Berg <[email protected]>
Bisected-by: Sitsofe Wheeler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
When I moved the TX info into skb->cb apparently I forgot to change a
few places to put the p54-internal data into info->driver_data rather
than skb->cb. This should fix it.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
As the driver has the standard way to handle PSK, deprecate the old
interface.
Signed-off-by: Masakazu Mokuno <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
With the new WEXT flags, the PS3 wireless driver can tell the user space that
it would do handle 4-way handshake by itself and needs the PSK without private
ioctls.
Signed-off-by: Masakazu Mokuno <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This defines the flags for setting the PMK to the driver and the
capability flag for this so that the user space program can figure out
whether the target driver wants to do 4-way hand shake by itself and
pass the PMK which is needed before 4-way handshake to the driver.
Signed-off-by: Masakazu Mokuno <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
As the bounce buffer is allocaetd dynamically, kill the static bounce buffer.
Signed-off-by: Masakazu Mokuno <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Allocate the bouce buffer for the wireless command dynamically.
Signed-off-by: Masakazu Mokuno <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch saves memory by reducing the size of the entry in the txq. It
was 640 because of the calibration commands. Calibration commands are now
sent as HUGE commands (using the extra 1024 bytes at the end of the command
txq), hence, there is no need for 640 in every entry any more.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch solves a bug in debugfs unregistration. iwlwifi registers its
debugfs files under cfg80211's dir, but removed its files only after having
unregistered mac80211 that removes cfg80211 debugfs dir. This garbaged
debugfs and didn't allow to rmmod and insmod iwlwifi several times in a
row.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch fixes a memory leak that the scan buffer isn't released
on exit.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch disables FAT channel when it is not permitted according to
the EEPROM.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch allows to disable FAT channel in specific configurations.
For example the configuration (8, +1), (primary channel 8, extension
channel 12) isn't permitted in U.S., but (8, -1), (primary channel 8,
extension channel 4) is. When FAT channel configuration is not
permitted, FAT channel should be reported as not supported in the
capabilities of the HT IE in association request. And sssociation is
performed on 20Mhz channel.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch moves Rx handlers from iwl 4965 only use to common use along
with iwl 5000, thus enables Rx path to iwl 5000.
Signed-off-by: Ron Rindjunsky <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch adds frame count limit to link quality host command.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch moves aggregation action code to iwl-tx.c in iwlcore.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch moves iwl_sta_modify_enable_tid_tx into iwl-sta.c.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This is required to overcome a bug in 5000 HW byte count table.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch
1. moves TX reclaim flow into iwl-tx
2. separates command queue and tx queue reclaim flow
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch fixes cases that the code raised or didn't decrease
the rate although the success ratio was not good.
Signed-off-by: Guy Cohen <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This pach moves common tx response handlers to the header files
and iwl-tx.c.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Ron Rindjunsky <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch makes driver state timeout checks on ucode alive response
only if run time ucode have been loaded.
Signed-off-by: Ron Rindjunsky <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch moves iwl_rx_missed_beacon_notif rx handler to iwl-rx.c.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch adds remove station functionality, which is required for
5000 and AP mode.
There are still some gaps in managment that need to be closed but it
provides sufficient functionality for 5000 HW.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch moves txq_ctx_stop into iwl-tx.c iwlcore module.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch refactors stop master function for 4965 and 5000.
Currently it duplicates the function.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch adds apm stop function for 4965 and 5000.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch implements apm reset flow for 4965 and 5000.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch removes 4965 from alive_resp and init_alivie_resp.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch cleans up alive_start routine. It removes 4965 from the common
code and moves the run time calibration reset into a common code.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch removes notif_missed_beacons from priv since it was never
used. Missed beacons notification will have only meaning if roaming
will be implemented in mac80211.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch removes unused variable from __iwl4965_down.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch creates driver's debugfs tree under wiphy->debugfsdir.
This patch fixes collision in debugfs if two or more NICs are plugged.
Signed-off-by: Zhu Yi <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch increases iwl_cmd payload maximum size from 360 to 640
to fit some of iwl5000 commands as well.
Signed-off-by: Ron Rindjunsky <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch updates the usage of the pointers to error and log tables
received in alive response w.r.t. the current uCode image.
Signed-off-by: Gregory Greenman <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch fills the valid_rtc_data_addr handler in iwl5000.
Signed-off-by: Ron Rindjunsky <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch moves the function iwl_dump_nic_error_log to iwlcore.
Remove sysfs entry it cannot be really triggered.
Signed-off-by: Ester Kummer <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
