Simple cleanup to use the new APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
There are two reasons for reporting wakeup event when dedicated wakeup
IRQ is triggered:
- wakeup events accounting, so proper statistical data will be
displayed in sysfs and debugfs;
- there are small window when System is entering suspend during which
dedicated wakeup IRQ can be lost:
dpm_suspend_noirq()
|- device_wakeup_arm_wake_irqs()
|- dev_pm_arm_wake_irq(X)
|- IRQ is enabled and marked as wakeup source
[1]...
|- suspend_device_irqs()
|- suspend_device_irq(X)
|- irqd_set(X, IRQD_WAKEUP_ARMED);
|- wakup IRQ armed
The wakeup IRQ can be lost if it's triggered at point [1]
and not armed yet.
Hence, fix above cases by adding simple pm_wakeup_event() call in
handle_threaded_wake_irq().
Fixes: 4990d4fe32 (PM / Wakeirq: Add automated device wake IRQ handling)
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
[ tony@atomide.com: added missing return to avoid warnings ]
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dedicated wakeirq is a one time event to wake-up the system from
low-power state and then call pm_runtime_resume() on the device wired
with the dedicated wakeirq.
Sometimes dedicated wakeirqs can get deferred if they trigger after we
call disable_irq_nosync() in dev_pm_disable_wake_irq(). This can happen
if pm_runtime_get() is called around the same time a wakeirq fires.
If an interrupt fires after disable_irq_nosync(), by default it will get
tagged with IRQS_PENDING and will run later on when the interrupt is
enabled again.
Deferred wakeirqs usually just produce pointless wake-up events. But they
can also cause suspend to fail if the deferred wakeirq fires during
dpm_suspend_noirq() for example. So we really don't want to see the
deferred wakeirqs triggering after the device has resumed.
Let's fix the issue by setting IRQ_DISABLE_UNLAZY flag for the dedicated
wakeirqs. The other option would be to implement irq_disable() in the
dedicated wakeirq controller, but that's not a generic solution.
For reference below is what happens with a IRQ_TYPE_EDGE_BOTH IRQ
type wakeirq:
- resume by dedicated IRQ (EDGE_FALLING)
- suspend_enter()
....
- arch_suspend_enable_irqs()
|- dedicated IRQ armed and fired
|- irq_pm_check_wakeup()
|- disarm, disable IRQ and mark as IRQS_PENDING
....
- dpm_resume_noirq()
|- resume_device_irqs()
|- __enable_irq()
|- check_irq_resend()
|- handle_threaded_wake_irq()
|- dedicated IRQ processed
|- device_wakeup_disarm_wake_irqs()
|- disable_irq_wake()
....
!-> dedicated IRQ (EDGE_RISING)
-| handle_edge_irq()
|- IRQ disabled: mask_ack_irq and mark as IRQS_PENDING
....
- subsequent suspend
....
|- dpm_suspend_noirq()
|- device_wakeup_arm_wake_irqs()
|- __enable_irq()
|- check_irq_resend()
(a) |- handle_threaded_wake_irq()
|- pm_wakeup_event() --> abort suspend
....
|- suspend_device_irqs()
|- suspend_device_irq()
|- dedicated IRQ armed
....
(b) |- resend_irqs
|- irq_pm_check_wakeup()
|- IRQ armed -> abort suspend
because of pending IRQ System suspend can be aborted at points
(a)-not armed or (b)-armed.
Fixes: 4990d4fe32 (PM / Wakeirq: Add automated device wake IRQ handling)
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[ tony@atomide.com: added a comment, updated the description ]
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We currently rely on runtime PM to enable dedicated wakeirq for suspend.
This assumption fails in the following two cases:
1. If the consumer driver does not have runtime PM implemented, the
dedicated wakeirq never gets enabled for suspend
2. If the consumer driver has runtime PM implemented, but does not idle
in suspend
Let's fix the issue by always enabling the dedicated wakeirq during
suspend.
Depends-on: bed570307e (PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend)
Fixes: 4990d4fe32 (PM / Wakeirq: Add automated device wake IRQ handling)
Reported-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[ tony@atomide.com: updated based on bed570307e, added description ]
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Before loading a new ELF, clean previous kernel version, license and
processed sections.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170208202744.16274-3-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a missing check for the map fixup loop.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170208202744.16274-2-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include unistd.h to define __NR_getuid and __NR_getsid.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170208202744.16274-4-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it will always evaluate to 'true', as reported by clang:
util/map.c:390:36: error: address of array 'map->dso->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (map && map->dso && (map->dso->name || map->dso->long_name)) {
~~~~~~~~~~^~~~ ~~
util/map.c:393:22: error: address of array 'map->dso->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
else if (map->dso->name)
~~ ~~~~~~~~~~^~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-x8cu007cly40kfp8xnpi9kya@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will always evaluate to 'true', as clang warns:
CC /tmp/build/perf/tests/perf-record.o
CC /tmp/build/perf/tests/evsel-roundtrip-name.o
tests/perf-record.c:69:24: error: comparison of array 'argv' equal to a null pointer is always false [-Werror,-Wtautological-pointer-compare]
if (evlist == NULL || argv == NULL) {
^~~~ ~~~~
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o4977g6p9b3peak9ct6ef48q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is an array, so will always evaluate to 'true', as reported by
clang:
builtin-sched.c:2070:19: error: address of array 'sym->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (sym && sym->name) {
~~ ~~~~~^~~~
1 warning generated.
So just ditch all those useless checks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ydpm927col06paixb775jjx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a tool can't open counters due to the kernel.perf_event_paranoit
sysctl setting, we inform how to tweak it to allow the operation to
succeed, in addition to that, suggest setting /etc/sysctl.conf to
make the setting permanent.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4gwe99k4a6p12d4u8bbyttj2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Detected with clang:
CC /tmp/build/perf/plugin_function.o
plugin_function.c:145:6: warning: variable 'index' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (parent && ftrace_indent->set)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
plugin_function.c:148:29: note: uninitialized use occurs here
trace_seq_printf(s, "%*s", index*3, "");
^~~~~
plugin_function.c:145:2: note: remove the 'if' if its condition is always true
if (parent && ftrace_indent->set)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
plugin_function.c:145:6: warning: variable 'index' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
if (parent && ftrace_indent->set)
^~~~~~
plugin_function.c:148:29: note: uninitialized use occurs here
trace_seq_printf(s, "%*s", index*3, "");
^~~~~
plugin_function.c:145:6: note: remove the '&&' if its condition is always true
if (parent && ftrace_indent->set)
^~~~~~~~~
plugin_function.c:133:11: note: initialize the variable 'index' to silence this warning
int index;
^
= 0
2 warnings generated.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b5wyjocel55gorl2jq2cbxrr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A undefined value was being used for the OLD_RING_BUFFER_TYPE_TIME_STAMP
case entry, as the 'length' variable was not being initialized, fix it.
Caught by the reporter when building tools/perf/ using clang, which emmitted
this warning:
kbuffer-parse.c:312:7: warning: variable 'length' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized]
case OLD_RINGBUF_TYPE_TIME_EXTEND:
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kbuffer-parse.c:339:29: note: uninitialized use occurs here
kbuf->next = kbuf->index + length;
^~~~~~
kbuffer-parse.c:297:21: note: initialize the variable 'length' to silence this warning
unsigned int length;
^
= 0
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170213121418.47f279e8@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix below compile error:
CC util/scripting-engines/trace-event-perl.o
In file included from /usr/lib/perl5/5.22.2/i686-linux/CORE/perl.h:5673:0,
from util/scripting-engines/trace-event-perl.c:31:
/usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h: In function 'S__is_utf8_char_slow':
/usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h:270:5: error: nested extern declaration of 'Perl___notused' [-Werror=nested-externs]
dTHX; /* The function called below requires thread context */
^
cc1: all warnings being treated as errors
After digging perl5 repository, I find out that we will meet this
compile error with perl from v5.21.1 to v5.25.4
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170212024655.GA15997@udknight
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the IRQ stack changes integrated, the XRX200 devices started
emitting a constant stream of kernel messages like this:
[ 565.415310] Spurious IRQ: CAUSE=0x1100c300
This is caused by IP0 getting handled by plat_irq_dispatch() rather than
its vectored interrupt handler, which is fixed by commit de856416e714
("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch").
Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly
by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ
for all MIPS CPU interrupts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15077/
[james.hogan@imgtec.com: tweaked commit message]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Since commit 4bcc595ccd ("printk: reinstate KERN_CONT for printing
continuation lines") the output of counter synchornisation has been
split across lines:
[ 0.665181] Synchronize counters for CPU 1:
[ 0.678578] done.
Fix this by using pr_cont, and replace printk with pr_info.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15195/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Commit dda45f701c ("MIPS: Switch to the irq_stack in interrupts")
changed both the normal and vectored interrupt handlers. Unfortunately
the vectored version, "except_vec_vi_handler", was incorrectly modified
to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to
the vectored handler that has been set up. This is ok for many platforms
which set the vectored handler to plat_irq_dispatch anyway, but will
cause problems with platforms that use other handlers.
Fixes: dda45f701c ("MIPS: Switch to the irq_stack in interrupts")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15110/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
The postlink Makefile must include include/config/auto.conf to get the
kernel configuration variables. But in a clean kernel directory this
file does not exist, causing make to bail with the error:
arch/mips/Makefile.postlink:10: include/config/auto.conf: No such file or directory
make[1]: *** No rule to make target 'include/config/auto.conf'. Stop.
Makefile:1290: recipe for target 'vmlinuxclean' failed
Fix this by using "-include" to not cause a Make error when the file
does not exist.
Fixes: 44079d3509 ("MIPS: Use Makefile.postlink to insert relocations into vmlinux")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15136/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
The recently added MIPS cacheinfo support used a macro populate_cache()
to populate the cacheinfo structures depending on which caches are
present. However the macro contains multiple statements without
enclosing them in a do {} while (0) loop, so the L2 and L3 cache
conditionals in populate_cache_leaves() only conditionalised the first
statement in the macro.
This overflows the buffer allocated by detect_cache_attributes(),
resulting in boot failures under QEMU where neither the L2 or L2 caches
are present.
Enclose the macro statements in a do {} while (0) block to keep the
whole macro inside the conditionals.
Fixes: ef462f3b64 ("MIPS: Add cacheinfo support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Justin Chen <justin.chen@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/15276/
When building for microMIPS we need to ensure that the assembler always
knows that there is code at the target of a branch or jump. Commit
7170bdc777 ("MIPS: Add return errors to protected cache ops")
introduced a fixup path to protected_cache(e)_op() which does not meet
this requirement. The fixup path jumps to the "2" label but the .section
pseudo-op immediately following it causes the label to be marked as
data. Linking then fails with:
mips-img-linux-gnu-ld: arch/mips/mm/c-r4k.o: .fixup+0x0: Unsupported
jump between ISA modes; consider recompiling with interlinking
enabled.
Fix this by declaring that "2" labels code using the .insn directive.
Fixes: 7170bdc777 ("MIPS: Add return errors to protected cache ops")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/15274/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
MIPS dependencies for KVM
Miscellaneous MIPS architecture changes depended on by the MIPS KVM
changes in the KVM tree.
- Move pgd_alloc() out of header.
- Exports so KVM can access page table management and TLBEX functions.
- Add return errors to protected cache ops.
The code sets the default return code to -ENOSYS but then overrides this
to -EINVAL in the switch() statement's default case, which is clearly
silly.
This patch removes the override and sets the default return code to
-ENOTTY, which is the conventional return for an unimplemented ioctl.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Commit a92e7c3d82 ("spi: s3c64xx: consider the case when the CS
line is not connected") introduced an inconsistency between the
binding, where the disconnected CS line was marked as
'no-cs-readback', and the driver.
The driver is erroneously checking for that attribute with
property name of 'broken-cs'.
Check for 'no-cs-readback' in the driver as well.
Fixes: a92e7c3d82 ("spi: s3c64xx: consider the case when the CS line is not connected")
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The tree used for staging pstore changes has moved to my repo. The -next
tree already pulls from here, so update MAINTAINERS to reflect reality.
While at it, add some more pstore-related files to track.
Signed-off-by: Kees Cook <keescook@chromium.org>
Instead of needing additional checks in callers for unallocated przs,
perform the check in the walker, which gives us a more universal way to
handle the situation.
Signed-off-by: Kees Cook <keescook@chromium.org>
GCC complains about unused variable 'vma' in mark_screen_rdonly() if THP is
disabled:
arch/x86/kernel/vm86_32.c: In function ‘mark_screen_rdonly’:
arch/x86/kernel/vm86_32.c:180:26: warning: unused variable ‘vma’
[-Wunused-variable]
struct vm_area_struct *vma = find_vma(mm, 0xA0000);
That's silly. pmd_trans_huge() resolves to 0 when THP is disabled, so the
whole block should be eliminated.
Moving the variable declaration outside the if() block shuts GCC up.
Reported-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Carlos O'Donell <carlos@redhat.com>
Link: http://lkml.kernel.org/r/20170213125228.63645-1-kirill.shutemov@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.
Fixes: d2a2e729a6 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.
Fixes: d2a2e729a6 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The "delta-abs" compute method will show most changed entries on top.
So users can easily see how much effect between the data. Note that it
also changes the default of -o option to 1 in order to apply the compute
method. To see original-style (sorted by baseline) use -o 0 option.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170210161856.18422-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The diff.compute config variable is to set the default compute method of
perf diff command (-c option). Possible values 'delta' (default),
'delta-abs', 'ratio' and 'wdiff'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170210073614.24584-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In many cases, I need to look at differences between two data so I often
used the -o option to sort the result base on the difference first.
It'd be nice to have a config option to set it by default.
The diff.order config option is to set the default value of -o/--order
option.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the kernel headers structure, setting up things that are
specific to gcc or to some specific version of gcc.
It gets included by linux/compiler.h when gcc is the compiler being
used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fabcqfq4asodq9t158hcs8t3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using new link mode indices instead deprecated SUPPORTED_/ADVERTISED_
macro.
Added indication for 2500 and 5000mbit link modes (AQtion adapter already
supports these speeds).
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ghostprotocols.net domain is not working, remove it from CREDITS and
MAINTAINERS, and change the status to "Odd fixes", and since I haven't
been maintaining those, remove my address from there.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Poll messages that are used to allocate a logical address should
use the same initiator as the destination. Instead, it expected that
the initiator was 0xf which is not according to the standard.
This also had consequences for the message checks in cec_transmit_msg_fh
that incorrectly rejected poll messages with the same initiator and
destination.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This reverts 'commit 7e0739cd9c ("[media] videodev2.h: fix
sYCC/AdobeYCC default quantization range").
The problem is that many drivers can convert R'G'B' content (often
from sensors) to Y'CbCr, but they all produce limited range Y'CbCr.
To stay backwards compatible the default quantization range for
sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full
range, even though the corresponding standards specify full range.
Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and
also update the documentation.
Fixes: 7e0739cd9c ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range")
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.9 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The UEVENT user mode helper is enabled before the initcalls are executed
and is available when the root filesystem has been mounted.
The user mode helper is triggered by device init calls and the executable
might use the futex syscall.
futex_init() is marked __initcall which maps to device_initcall, but there
is no guarantee that futex_init() is invoked _before_ the first device init
call which triggers the UEVENT user mode helper.
If the user mode helper uses the futex syscall before futex_init() then the
syscall crashes with a NULL pointer dereference because the futex subsystem
has not been initialized yet.
Move futex_init() to core_initcall so futexes are initialized before the
root filesystem is mounted and the usermode helper becomes available.
[ tglx: Rewrote changelog ]
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: jiang.biao2@zte.com.cn
Cc: jiang.zhengxiong@zte.com.cn
Cc: zhong.weidong@zte.com.cn
Cc: deng.huali@zte.com.cn
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). Fix by using devm_ioremap_resource instead of devm_ioremap.
Fixes: 8b1bd11c1f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to unlock before returning -EINVAL on this error path.
Fixes: 04cc058f0c ("pinctrl: intel: Add support for 1k additional pull-down")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Andrew Lunn says:
====================
mv88e6xxx Watchdog support
The Marvell switches have an in built watchdog over some of the
internal state machine. The watchdog can be configured to raise an
interrupt on error. The problem the watchdog found is then logged to
the kernel log.
The older switches can automagically perform a software reset when the
watchdog triggers. This just resets the internal state machine, but
leaves the switch configuration unchanged.
The 6390 family of switches cannot both raise an interrupt and
automagically perform a software reset. So the interrupt handler has
to perform the switch reset, and then re-enable the watchdog
interrupts.
This has been tested using hacked together debugfs code which allows
the "force" bit to be set, so cause a watchdog interrupt.
v2: Remove g2_prefix
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the ops needed to support the watchdog for the MV88E6390
family.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch contains a watchdog looking for issues with the internal
gubbins of the switch. Hook the interrupt the watchdog triggers and
log the value of the control register indicating why the watchdog
fired. The watchdog can only be cleared with a switch reset, which
will destroy the current configuration. Rather than doing this, just
disable the interrupt.
The mv88e6390 family has different watchdog registers. So use an ops
structure, so support for the mv88e6390 family can be added later.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The adaptor on Analog Devices EVAL-ADXL362Z development board is used
to flash and debug firmware of on-board Renesas RL78/G13 MCU.
Also added support of the 153600 baud rate, since the stock firmware
uses it.
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
None of the Kconfigs for any of these drivers are tristate,
meaning that they currently are not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: "Antoine Ténart" <antoine.tenart@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Hongzhou Yang <hongzhou.yang@mediatek.com>
Cc: Thomas Hebb <tommyhebb@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
