commit 833c70e212fc40d3e98da941796f4c7bcaecdf58 upstream.
Firmware supports multiple sg_cnt for request and response for CT
commands, so remove the redundant check. A check is there where sg_cnt
for request and response should be same. This is not required as driver
and FW have code to handle multiple and different sg_cnt on request and
response.
Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4e268f898c8a08f0a1188677e15eadbc06e98f6 upstream.
The fc_function_template for vports was missing the
.show_host_supported_speeds. The base port had the same.
Add .show_host_supported_speeds to the vport template as well.
Cc: stable@vger.kernel.org
Fixes: 2c3dfe3f6a ("[SCSI] qla2xxx: add support for NPIV")
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4812b7796c144f63a1094f79a5eb8fbdad8d7ebc upstream.
NVMe controller fails to send connect command due to failure to locate
hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The
cause of the issue is NPIV host did not initialize the vha->irq_offset
field. This field is given to blk-mq (blk_mq_pci_map_queues) to help
locate the beginning of IO Queues which in turn help locate NVMe queue
0.
Initialize this field to allow NVMe to work properly with NPIV host.
kernel: nvme nvme5: Connect command failed, errno: -18
kernel: nvme nvme5: qid 0: secure concatenation is not supported
kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401
kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401)
kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds
Cc: stable@vger.kernel.org
Fixes: f0783d43dd ("scsi: qla2xxx: Use correct number of vectors for online CPUs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 914eec5e980171bc128e7e24f7a22aa1d803570e upstream.
The following INFO level message was seen:
seq_file: buggy .next function ocfs2_dlm_seq_next [ocfs2] did not
update position index
Fix:
Update *pos (so m->index) to make seq_read_iter happy though the index its
self makes no sense to ocfs2_dlm_seq_next.
Link: https://lkml.kernel.org/r/20241119174500.9198-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e63fbd5f6810ed756bbb8a1549c7d4132968baa9 upstream.
The cmp_entries_dup() function used as the comparator for sort()
violated the symmetry and transitivity properties required by the
sorting algorithm. Specifically, it returned 1 whenever memcmp() was
non-zero, which broke the following expectations:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
These violations could lead to incorrect sorting and failure to
correctly identify duplicate elements.
Fix the issue by directly returning the result of memcmp(), which
adheres to the required comparison properties.
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa0 ("tracing: Add lock-free tracing_map")
Link: https://lore.kernel.org/20241203202228.1274403-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27abc7b3fa2e09bbe41e2924d328121546865eda ]
trie_get_next_key() uses node->prefixlen == key->prefixlen to identify
an exact match, However, it is incorrect because when the target key
doesn't fully match the found node (e.g., node->prefixlen != matchlen),
these two nodes may also have the same prefixlen. It will return
expected result when the passed key exist in the trie. However when a
recently-deleted key or nonexistent key is passed to
trie_get_next_key(), it may skip keys and return incorrect result.
Fix it by using node->prefixlen == matchlen to identify exact matches.
When the condition is true after the search, it also implies
node->prefixlen equals key->prefixlen, otherwise, the search would
return NULL instead.
Fixes: b471f2f1de ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eae6a075e9537dd69891cf77ca5a88fa8a28b4a1 ]
Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST
flags. These flags can be specified by users and are relevant since LPM
trie supports exact matches during update.
Fixes: b95a5c4db0 ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 984836621aad98802d92c4a3047114cf518074c8 ]
If we remove the module which will call mpc52xx_spi_remove
it will free 'ms' through spi_unregister_controller.
while the work ms->work will be used. The sequence of operations
that may lead to a UAF bug.
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in mpc52xx_spi_remove.
Fixes: ca632f5566 ("spi: reorganize drivers")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/1f16f8ae0e50ca9adb1dc849bf2ac65a40c9ceb9.1732783000.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca70b8baf2bd125b2a4d96e76db79375c07d7ff2 ]
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging
tosend bytes, which is either msg->sg.size or a smaller value apply_bytes.
Potential problems with this strategy are as follows:
- If the actual sent bytes are smaller than tosend, we need to charge some
bytes back, as in line 487, which is okay but seems not clean.
- When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may
miss uncharging (msg->sg.size - apply_bytes) bytes.
[...]
415 tosend = msg->sg.size;
416 if (psock->apply_bytes && psock->apply_bytes < tosend)
417 tosend = psock->apply_bytes;
[...]
443 sk_msg_return(sk, msg, tosend);
444 release_sock(sk);
446 origsize = msg->sg.size;
447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
448 msg, tosend, flags);
449 sent = origsize - msg->sg.size;
[...]
454 lock_sock(sk);
455 if (unlikely(ret < 0)) {
456 int free = sk_msg_free_nocharge(sk, msg);
458 if (!cork)
459 *copied -= free;
460 }
[...]
487 if (eval == __SK_REDIRECT)
488 sk_mem_charge(sk, tosend - sent);
[...]
When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply,
the following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0
Modules linked in:
CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events sk_psock_destroy
RIP: 0010:inet_sock_destruct+0x190/0x1a0
RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206
RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800
RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900
RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0
R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400
R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100
FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x89/0x130
? inet_sock_destruct+0x190/0x1a0
? report_bug+0xfc/0x1e0
? handle_bug+0x5c/0xa0
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? inet_sock_destruct+0x190/0x1a0
__sk_destruct+0x25/0x220
sk_psock_destroy+0x2b2/0x310
process_scheduled_works+0xa3/0x3e0
worker_thread+0x117/0x240
? __pfx_worker_thread+0x10/0x10
kthread+0xcf/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
In __SK_REDIRECT, a more concise way is delaying the uncharging after sent
bytes are finalized, and uncharge this value. When (ret < 0), we shall
invoke sk_msg_free.
Same thing happens in case __SK_DROP, when tosend is set to apply_bytes,
we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same
warning will be reported in selftest.
[...]
468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta);
473 return -EACCES;
[...]
So instead of sk_msg_free_partial we can do sk_msg_free here.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Fixes: 8ec95b94716a ("bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241016234838.3167769-3-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 050b23d081da0f29474de043e9538c1f7a351b3b ]
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in grgpio_probe is not checked.
Add NULL check in grgpio_probe, to handle kernel NULL
pointer dereference error.
Cc: stable@vger.kernel.org
Fixes: 7eb6ce2f27 ("gpio: Convert to using %pOF instead of full_name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20241114091822.78199-1-hanchunchao@inspur.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d036ae41cebdfae92666024163c109b8fef516fa ]
Instead of dereferencing the platform device pointer repeatedly, just
store its address in a helper variable.
Link: https://lore.kernel.org/r/20241015131832.44678-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 050b23d081da ("gpio: grgpio: Add NULL check in grgpio_probe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b2f2d22fb424e9bebda4dbf6676cbfc7f9f62cd ]
Fix the AEGIS assembly code to access 'unsigned int' arguments as 32-bit
values instead of 64-bit, since the upper bits of the corresponding
64-bit registers are not guaranteed to be zero.
Note: there haven't been any reports of this bug actually causing
incorrect behavior. Neither gcc nor clang guarantee zero-extension to
64 bits, but zero-extension is likely to happen in practice because most
instructions that operate on 32-bit registers zero-extend to 64 bits.
Fixes: 1d373d4e8e ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a8770b746bd05ef68217989cd723b2c24d2208d ]
Moving early_recursion_flag (4 bytes) after early_level4_pgt (4k) and
early_dynamic_pgts (256k) saves 4k which are used for alignment of
early_level4_pgt after early_recursion_flag.
The real improvement is merely on the source code side. Previously it
was:
* __INITDATA + .balign
* early_recursion_flag variable
* a ton of CPP MACROS
* __INITDATA (again)
* early_top_pgt and early_recursion_flag variables
* .data
Now, it is a bit simpler:
* a ton of CPP MACROS
* __INITDATA + .balign
* early_top_pgt and early_recursion_flag variables
* early_recursion_flag variable
* .data
On the binary level the change looks like this:
Before:
(sections)
12 .init.data 00042000 0000000000000000 0000000000000000 00008000 2**12
(symbols)
000000 4 OBJECT GLOBAL DEFAULT 22 early_recursion_flag
001000 4096 OBJECT GLOBAL DEFAULT 22 early_top_pgt
002000 0x40000 OBJECT GLOBAL DEFAULT 22 early_dynamic_pgts
After:
(sections)
12 .init.data 00041004 0000000000000000 0000000000000000 00008000 2**12
(symbols)
000000 4096 OBJECT GLOBAL DEFAULT 22 early_top_pgt
001000 0x40000 OBJECT GLOBAL DEFAULT 22 early_dynamic_pgts
041000 4 OBJECT GLOBAL DEFAULT 22 early_recursion_flag
So the resulting vmlinux is smaller by 4k with my toolchain as many
other variables can be placed after early_recursion_flag to fill the
rest of the page. Note that this is only .init data, so it is freed
right after being booted anyway. Savings on-disk are none -- compression
of zeros is easy, so the size of bzImage is the same pre and post the
change.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191003095238.29831-1-jslaby@suse.cz
Stable-dep-of: 3b2f2d22fb42 ("crypto: x86/aegis128 - access 32-bit arguments as 32-bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afc545da381ba0c651b2658966ac737032676f01 ]
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: 4bac07c993 ("xen: add the Xenbus sysfs and virtual device hotplug driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f69a110e7bba3ec6bc089a2f736ca0941d887ed ]
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with
lock") introduced a bug by holding a lock while calling a function
which might schedule.
Fix that by using a semaphore instead.
Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock")
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200305100323.16736-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Stable-dep-of: afc545da381b ("xen: Fix the issue of resource not being properly released in xenbus_dev_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060eabe8fbe726aca341b518366da4d79e338100 ]
A driver's 'reclaim_memory' callback can race with 'probe' or 'remove'
because it will be called whenever memory pressure is detected. To
avoid such race, this commit embeds a spinlock in each 'xenbus_device'
and make 'xenbus' to hold the lock while the corresponded callbacks are
running.
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Stable-dep-of: afc545da381b ("xen: Fix the issue of resource not being properly released in xenbus_dev_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a105678fb3ec4763352db84745968bf2cb4aa65 ]
Granting pages consumes backend system memory. In systems configured
with insufficient spare memory for those pages, it can cause a memory
pressure situation. However, finding the optimal amount of the spare
memory is challenging for large systems having dynamic resource
utilization patterns. Also, such a static configuration might lack
flexibility.
To mitigate such problems, this commit adds a memory reclaim callback to
'xenbus_driver'. If a memory pressure is detected, 'xenbus' requests
every backend driver to volunarily release its memory.
Note that it would be able to improve the callback facility for more
sophisticated handlings of general pressures. For example, it would be
possible to monitor the memory consumption of each device and issue the
release requests to only devices which causing the pressure. Also, the
callback could be extended to handle not only memory, but general
resources. Nevertheless, this version of the implementation defers such
sophisticated goals as a future work.
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Stable-dep-of: afc545da381b ("xen: Fix the issue of resource not being properly released in xenbus_dev_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 196748a276b4dee01177e6b7abcda27cd759de83 ]
To prevent a PV driver module being removed whilst attached to its other
end, and hence xenbus calling into potentially invalid text, take a
reference on the module before calling the probe() method (dropping it if
unsuccessful) and drop the reference after returning from the remove()
method.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: afc545da381b ("xen: Fix the issue of resource not being properly released in xenbus_dev_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ffc7481153bbabf3332c6a19b289730c7e1edf5 ]
rhashtable does not provide stable walk, duplicated elements are
possible in case of resizing. I considered that checking for errors when
calling rhashtable_walk_next() was sufficient to detect the resizing.
However, rhashtable_walk_next() returns -EAGAIN only at the end of the
iteration, which is too late, because a gc work containing duplicated
elements could have been already scheduled for removal to the worker.
Add a u32 gc worker sequence number per set, bump it on every workqueue
run. Annotate gc worker sequence number on the expired element. Use it
to skip those already seen in this gc workqueue run.
Note that this new field is never reset in case gc transaction fails, so
next gc worker run on the expired element overrides it. Wraparound of gc
worker sequence number should not be an issue with stale gc worker
sequence number in the element, that would just postpone the element
removal in one gc run.
Note that it is not possible to use flags to annotate that element is
pending gc run to detect duplicates, given that gc transaction can be
invalidated in case of update from the control plane, therefore, not
allowing to clear such flag.
On x86_64, pahole reports no changes in the size of nft_rhash_elem.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Tested-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 456f010bfaefde84d3390c755eedb1b0a5857c3c ]
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a6 ("netfilter: ipset: IP set core support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0566f83d206c7a864abcd741fe39d6e0ae5eef29 ]
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access.
Fixes: bbd98fe48a ("igb: Fix DCA errors and do not use context index for 82576")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a0ea70da56ee8c2716d0b79e9959d3c47efab62 ]
Commit 43645ce03e ("qed: Populate nvm image attribute shadow.")
added support for populating flash image attributes, notably
"num_images". However, some cards were not able to return this
information. In such cases, the driver would return EINVAL, causing the
driver to exit.
Add check to return EOPNOTSUPP instead of EINVAL when the card is not
able to return these information. The caller function already handles
EOPNOTSUPP without error.
Fixes: 43645ce03e ("qed: Populate nvm image attribute shadow.")
Co-developed-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Louis Leseur <louis.leseur@gmail.com>
Link: https://patch.msgid.link/20241128083633.26431-1-louis.leseur@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 134bdac397661a5841d9f27f508190c68b26232b ]
The new structure 'tipc_aead_key' is added to the 'tipc.h' for user to
be able to transfer a key to TIPC in kernel. Netlink will be used for
this purpose in the later commits.
Acked-by: Ying Xue <ying.xue@windreiver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6a2fa13312e5 ("tipc: Fix use-after-free of kernel socket in cleanup_bearer().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbf8ac2fe5a0846508fe02b95a5de1a90fa73f4 ]
When user sets RX key for a peer not existing on the own node, a new
node entry is needed to which the RX key will be attached. However,
since the peer node address (& capabilities) is unknown at that moment,
only the node-ID is provided, this commit allows the creation of a node
with only the data that we call as “preliminary”.
A preliminary node is not the object of the “tipc_node_find()” but the
“tipc_node_find_by_id()”. Once the first message i.e. LINK_CONFIG comes
from that peer, and is successfully decrypted by the own node, the
actual peer node data will be properly updated and the node will
function as usual.
In addition, the node timer always starts when a node object is created
so if a preliminary node is not used, it will be cleaned up.
The later encryption functions will also use the node timer and be able
to create a preliminary node automatically when needed.
Acked-by: Ying Xue <ying.xue@windreiver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6a2fa13312e5 ("tipc: Fix use-after-free of kernel socket in cleanup_bearer().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a7ee696f7b000a970dcce0cb06fdcd0a9e6ee76 ]
As a need to support the crypto asynchronous operations in the later
commits, apart from the current RCU mechanism for bearer pointer, we
add a 'refcnt' to the bearer object as well.
So, a bearer can be hold via 'tipc_bearer_hold()' without being freed
even though the bearer or interface can be disabled in the meanwhile.
If that happens, the bearer will be released then when the crypto
operation is completed and 'tipc_bearer_put()' is called.
Acked-by: Ying Xue <ying.xue@windreiver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6a2fa13312e5 ("tipc: Fix use-after-free of kernel socket in cleanup_bearer().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3301ab7d5aeb0fe270f73a3d4810c9d1b6a9f045 ]
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was
92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in
54c1a859ef ("ipv6: Don't drop cache route entry unless timer actually
expired.") where the expired cached route is deleted and the sk_dst_cache
member of the socket is set to NULL by calling dst_negative_advice() but
the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the
sk_dst_cache of the socket while decrementing the refcount of the
exception dst.
Fixes: 92f1655aa2b22 ("net: fix __dst_negative_advice() race")
Fixes: 54c1a859ef ("ipv6: Don't drop cache route entry unless timer actually expired.")
Link: https://lore.kernel.org/netdev/20241113105611.GA6723@incl/T/#u
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241128085950.GA4505@incl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c695005bfe6569acd73d777ca298ddddd66105 ]
Since j1939_session_skb_queue() does an extra skb_get() for each new
skb, do the same for the initial one in j1939_session_new() to avoid
refcount underflow.
Reported-by: syzbot+d4e8dc385d9258220c31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d4e8dc385d9258220c31
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241105094823.2403806-1-dmantipov@yandex.ru
[mkl: clean up commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1596a135e3180c92e42dd1fbcad321f4fb3e3b17 ]
When the length of a GSO packet in the tbf qdisc is larger than the burst
size configured the packet will be segmented by the tbf_segment function.
Whenever this function is used to enqueue SKBs, the backlog statistic of
the tbf is not increased correctly. This can lead to underflows of the
'backlog' byte-statistic value when these packets are dequeued from tbf.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configured the tbf on
the outgoing interface of the machine as follows (burstsize = 1 MTU):
$ tc qdisc add dev <oif> root handle 1: tbf rate 50Mbit burst 1514 latency 50ms
Send bulk TCP traffic out via this interface, e.g., by running an iPerf3
client on this machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>
The 'backlog' byte-statistic has incorrect values while traffic is
transferred, e.g., high values due to u32 underflows. When the transfer
is stopped, the value is != 0, which should never happen.
This patch fixes this bug by updating the statistics correctly, even if
single SKBs of a GSO SKB cannot be enqueued.
Fixes: e43ac79a4b ("sch_tbf: segment too big GSO packets")
Signed-off-by: Martin Ottens <martin.ottens@fau.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241125174608.1484356-1-martin.ottens@fau.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ]
Under certain kernel configurations when building with Clang/LLVM, the
compiler does not generate a return or jump as the terminator
instruction for ip_vs_protocol_init(), triggering the following objtool
warning during build time:
vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6()
At runtime, this either causes an oops when trying to load the ipvs
module or a boot-time panic if ipvs is built-in. This same issue has
been reported by the Intel kernel test robot previously.
Digging deeper into both LLVM and the kernel code reveals this to be a
undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer
of 64 chars to store the registered protocol names and leaves it
uninitialized after definition. The function calls strnlen() when
concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE
strnlen() performs an extra step to check whether the last byte of the
input char buffer is a null character (commit 3009f891bb9f ("fortify:
Allow strlen() and strnlen() to pass compile-time known lengths")).
This, together with possibly other configurations, cause the following
IR to be generated:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 {
%1 = alloca [64 x i8], align 16
...
14: ; preds = %11
%15 = getelementptr inbounds i8, ptr %1, i64 63
%16 = load i8, ptr %15, align 1
%17 = tail call i1 @llvm.is.constant.i8(i8 %16)
%18 = icmp eq i8 %16, 0
%19 = select i1 %17, i1 %18, i1 false
br i1 %19, label %20, label %23
20: ; preds = %14
%21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23
...
23: ; preds = %14, %11, %20
%24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24
...
}
The above code calculates the address of the last char in the buffer
(value %15) and then loads from it (value %16). Because the buffer is
never initialized, the LLVM GVN pass marks value %16 as undefined:
%13 = getelementptr inbounds i8, ptr %1, i64 63
br i1 undef, label %14, label %17
This gives later passes (SCCP, in particular) more DCE opportunities by
propagating the undef value further, and eventually removes everything
after the load on the uninitialized stack location:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 {
%1 = alloca [64 x i8], align 16
...
12: ; preds = %11
%13 = getelementptr inbounds i8, ptr %1, i64 63
unreachable
}
In this way, the generated native code will just fall through to the
next function, as LLVM does not generate any code for the unreachable IR
instruction and leaves the function without a terminator.
Zero the on-stack buffer to avoid this possible UB.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402100205.PWXIz1ZK-lkp@intel.com/
Co-developed-by: Ruowen Qin <ruqin@redhat.com>
Signed-off-by: Ruowen Qin <ruqin@redhat.com>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 595a81988a6fe06eb5849e972c8b9cb21c4e0d54 ]
The sun4i_can_err() function only incremented the receive error counter
and never the transmit error counter, even if the STA_ERR_DIR flag
reported that an error had occurred during transmission.
Increment the receive/transmit error counter based on the value of the
STA_ERR_DIR flag.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-11-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee6bf3677ae03569d833795064e17f605c2163c7 ]
Call the function can_change_state() if the allocation of the skb
fails, as it handles the cf parameter when it is null.
Additionally, this ensures that the statistics related to state error
counters (i. e. warning, passive, and bus-off) are updated.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1495a21e0b8aad92132dfcf9c6fffc1bde9d5b2 ]
Clear the IRQ enable bit of WDT_MODE before asserting software reset
in order to make TOPRGU issue a system reset signal instead of an IRQ.
Fixes: a44a45536f ("watchdog: Add driver for Mediatek watchdog")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241106104738.195968-2-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa814d784ac034c62ab3fb0ef83daeafef527e2 ]
Commit da23b6faa8 ("watchdog: iTCO: Add support for Cannon Lake
PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's
value comparison for update_no_reboot_bit() call causing following
failure:
...
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
...
and this can lead to unexpected NMIs later during regular
crashkernel's workflow because of watchdog probe call failures.
This change masks NMI_NOW bit for TCO1_CNT register values to
avoid unexpected NMI_NOW bit inversions.
Fixes: da23b6faa8 ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240913191403.2560805-1-oocheret@cisco.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f8dbadef085ab447a01a8d4806a3f629fea05ed upstream.
The shader L1 cache is a writeback cache for shader loads/stores
and thus must be flushed before any BOs backing the shader buffers
are potentially freed.
Cc: stable@vger.kernel.org
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98100e88dd8865999dc6379a3356cd799795fe7b upstream.
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1ae/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Disabling lock debugging due to kernel taint
Object 0xff11000110e2ac38 @offset=3128
Allocated in nfsd_file_do_acquire+0x20f/0xa30 [nfsd] age=1635 cpu=3
pid=800
nfsd_file_do_acquire+0x20f/0xa30 [nfsd]
nfsd_file_acquire_opened+0x5f/0x90 [nfsd]
nfs4_get_vfs_file+0x4c9/0x570 [nfsd]
nfsd4_process_open2+0x713/0x1070 [nfsd]
nfsd4_open+0x74b/0x8b0 [nfsd]
nfsd4_proc_compound+0x70b/0xc20 [nfsd]
nfsd_dispatch+0x1b4/0x3a0 [nfsd]
svc_process_common+0x5b8/0xc50 [sunrpc]
svc_process+0x2ab/0x3b0 [sunrpc]
svc_handle_xprt+0x681/0xa20 [sunrpc]
nfsd+0x183/0x220 [nfsd]
kthread+0x199/0x1e0
ret_from_fork+0x31/0x60
ret_from_fork_asm+0x1a/0x30
Add nfs4_openowner_unhashed to help found unhashed nfs4_openowner, and
break nfsd4_open process to fix this problem.
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be8f982c369c965faffa198b46060f8853e0f1f0 upstream.
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
...
Call Trace:
<TASK>
e_show+0x20b/0x230 [nfsd]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: bf18f163e8 ("NFSD: Using exp_get for export getting")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc73b4186736341ab5cd2c199da82db6e1134e13 upstream.
A bug was found in the find_closest() (find_closest_descending() is also
affected after some testing), where for certain values with small
progressions, the rounding (done by averaging 2 values) causes an
incorrect index to be returned. The rounding issues occur for
progressions of 1, 2 and 3. It goes away when the progression/interval
between two values is 4 or larger.
It's particularly bad for progressions of 1. For example if there's an
array of 'a = { 1, 2, 3 }', using 'find_closest(2, a ...)' would return 0
(the index of '1'), rather than returning 1 (the index of '2'). This
means that for exact values (with a progression of 1), find_closest() will
misbehave and return the index of the value smaller than the one we're
searching for.
For progressions of 2 and 3, the exact values are obtained correctly; but
values aren't approximated correctly (as one would expect). Starting with
progressions of 4, all seems to be good (one gets what one would expect).
While one could argue that 'find_closest()' should not be used for arrays
with progressions of 1 (i.e. '{1, 2, 3, ...}', the macro should still
behave correctly.
The bug was found while testing the 'drivers/iio/adc/ad7606.c',
specifically the oversampling feature.
For reference, the oversampling values are listed as:
static const unsigned int ad7606_oversampling_avail[7] = {
1, 2, 4, 8, 16, 32, 64,
};
When doing:
1. $ echo 1 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is fine
2. $ echo 2 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is wrong; 2 should be returned here
3. $ echo 3 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
2 # this is fine
4. $ echo 4 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
4 # this is fine
And from here-on, the values are as correct (one gets what one would
expect.)
While writing a kunit test for this bug, a peculiar issue was found for the
array in the 'drivers/hwmon/ina2xx.c' & 'drivers/iio/adc/ina2xx-adc.c'
drivers. While running the kunit test (for 'ina226_avg_tab' from these
drivers):
* idx = find_closest([-1 to 2], ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, so value.
* idx = find_closest(3, ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, value 1; and now one could argue whether 3 is
closer to 4 or to 1. This quirk only appears for value '3' in this
array, but it seems to be a another rounding issue.
* And from 4 onwards the 'find_closest'() works fine (one gets what one
would expect).
This change reworks the find_closest() macros to also check the difference
between the left and right elements when 'x'. If the distance to the right
is smaller (than the distance to the left), the index is incremented by 1.
This also makes redundant the need for using the DIV_ROUND_CLOSEST() macro.
In order to accommodate for any mix of negative + positive values, the
internal variables '__fc_x', '__fc_mid_x', '__fc_left' & '__fc_right' are
forced to 'long' type. This also addresses any potential bugs/issues with
'x' being of an unsigned type. In those situations any comparison between
signed & unsigned would be promoted to a comparison between 2 unsigned
numbers; this is especially annoying when '__fc_left' & '__fc_right'
underflow.
The find_closest_descending() macro was also reworked and duplicated from
the find_closest(), and it is being iterated in reverse. The main reason
for this is to get the same indices as 'find_closest()' (but in reverse).
The comparison for '__fc_right < __fc_left' favors going the array in
ascending order.
For example for array '{ 1024, 512, 256, 128, 64, 16, 4, 1 }' and x = 3, we
get:
__fc_mid_x = 2
__fc_left = -1
__fc_right = -2
Then '__fc_right < __fc_left' evaluates to true and '__fc_i++' becomes 7
which is not quite incorrect, but 3 is closer to 4 than to 1.
This change has been validated with the kunit from the next patch.
Link: https://lkml.kernel.org/r/20241105145406.554365-1-aardelean@baylibre.com
Fixes: 95d119528b ("util_macros.h: add find_closest() macro")
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c174b53e95adf2eece2afc56cd9798374919f99a upstream.
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero.
Fixes: 9085daa4ab ("staging: iio: ad7780: add gain & filter gpio support")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241028142027.1032332-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45af52e7d3b8560f21d139b3759735eead8b1653 upstream.
When executing the following command:
# echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
The current mod command causes a null pointer dereference. While commit
0f17976568 ("ftrace: Fix regression with module command in stack_trace_filter")
has addressed part of the issue, it left a corner case unhandled, which still
results in a kernel crash.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241120052750.275463-1-guoweikang.kernel@gmail.com
Fixes: 04ec7bb642 ("tracing: Have the trace_array hold the list of registered func probes");
Signed-off-by: guoweikang <guoweikang.kernel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f514068fbc5d4d189c817adc7c4e32cffdc2e47 upstream.
The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.
To mitigate this, free the buffer when allegro_alloc_buffer fails.
Fixes: f20387dfd0 ("media: allegro: add Allegro DVT video IP core driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
