[ Upstream commit 099bffc7cadff40bfab1517c3461c53a7a38a0d7 ]
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e372baeb3d336b20fd9463784c577fd8824497cd ]
Some customer platforms do not enable mmconfig for various reasons,
such as bios bug, and therefore cannot access the GPU extend configuration
space through mmio.
When the system enters the d3cold state and resumes, the amdgpu driver
fails to resume because the extend configuration space registers of
GPU can't be restored. At this point, Usually we only see some failure
dmesg log printed by amdgpu driver, it is difficult to find the root
cause.
Therefor print a warnning message if the system can't access the
extended configuration space register when using large bar.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 099bffc7cadf ("drm/amdgpu: disable BAR resize on Dell G5 SE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7221f2b4655bb9a95ed6f86658713c8dd543d41 ]
No need to do it again.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 099bffc7cadf ("drm/amdgpu: disable BAR resize on Dell G5 SE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56d5f3eba3f5de0efdd556de4ef381e109b973a9 ]
In [1] it was reported that the acct(2) system call can be used to
trigger NULL deref in cases where it is set to write to a file that
triggers an internal lookup. This can e.g., happen when pointing acc(2)
to /sys/power/resume. At the point the where the write to this file
happens the calling task has already exited and called exit_fs(). A
lookup will thus trigger a NULL-deref when accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
This api should stop to exist though.
Link: https://lore.kernel.org/r/20250127091811.3183623-1-quzicheng@huawei.com [1]
Link: https://lore.kernel.org/r/20250211-work-acct-v1-1-1c16aecab8b3@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zicheng Qu <quzicheng@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c91dda97eea704ac257ddb138d1154adab8db62 ]
Use rlimit() helper instead of manually writing whole chain from
task to rlimit value. See patch "posix-cpu-timers: Use dedicated
helper to access rlimit values".
Link: https://lkml.kernel.org/r/20210728030822.524789-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: sh_def@163.com <sh_def@163.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 56d5f3eba3f5 ("acct: perform last write from workqueue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 647cef20e649c576dff271e018d5d15d998b629d upstream.
Expected behaviour:
In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a
packet in scheduler's queue and decrease scheduler's qlen by one.
Then, pfifo_tail_enqueue() enqueue new packet and increase
scheduler's qlen by one. Finally, pfifo_tail_enqueue() return
`NET_XMIT_CN` status code.
Weird behaviour:
In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a
scheduler that has no packet, the 'drop a packet' step will do nothing.
This means the scheduler's qlen still has value equal 0.
Then, we continue to enqueue new packet and increase scheduler's qlen by
one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by
one and return `NET_XMIT_CN` status code.
The problem is:
Let's say we have two qdiscs: Qdisc_A and Qdisc_B.
- Qdisc_A's type must have '->graft()' function to create parent/child relationship.
Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`.
- Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`.
- Qdisc_B is configured to have `sch->limit == 0`.
- Qdisc_A is configured to route the enqueued's packet to Qdisc_B.
Enqueue packet through Qdisc_A will lead to:
- hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B)
- Qdisc_B->q.qlen += 1
- pfifo_tail_enqueue() return `NET_XMIT_CN`
- hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A.
The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1.
Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem.
This violate the design where parent's qlen should equal to the sum of its childrens'qlen.
Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable.
Fixes: 57dbb2d83d ("sched: add head drop fifo queue")
Reported-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82c387ef7568c0d96a918a5a78d9cad6256cfa15 upstream.
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2158c953c973adb49383ddea2504faf08d375b7 upstream.
In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks
PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not
inverted when applied to the register values. Fix it.
Cc: stable@vger.kernel.org
Fixes: 59025887fb ("phy: Add new Exynos5 USB 3.0 PHY driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream.
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
Fixes: bbf711682c ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d39844150546fa1415127c5fbae26db64070dd3 upstream.
A low attr::freq value cannot be set via IOC_PERIOD on some platforms.
The perf_event_check_period() introduced in:
81ec3f3c4c ("perf/x86: Add check_period PMU callback")
was intended to check the period, rather than the frequency.
A low frequency may be mistakenly rejected by limit_period().
Fix it.
Fixes: 81ec3f3c4c ("perf/x86: Add check_period PMU callback")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-2-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1a7eb89ca0b89dc1c326eeee2596f263291aca3 upstream.
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
Cc: stable@vger.kernel.org
Cc: Wen Yang <wenyang@linux.alibaba.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250206090156.1561783-1-kniv@yandex-team.ru
Fixes: e31f7939c1c27 ("ftrace: Avoid potential division by zero in function profiler")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bebe35bb738b573c32a5033499cd59f20293f2a3 ]
I still have some Soekris net4826 in a Community Wireless Network I
volunteer with. These devices use an AMD SC1100 SoC. I am running
OpenWrt on them, which uses a patched kernel, that naturally has
evolved over time. I haven't updated the ones in the field in a
number of years (circa 2017), but have one in a test bed, where I have
intermittently tried out test builds.
A few years ago, I noticed some trouble, particularly when "warm
booting", that is, doing a reboot without removing power, and noticed
the device was hanging after the kernel message:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
If I removed power and then restarted, it would boot fine, continuing
through the message above, thusly:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
[ 0.090076] Enable Memory-Write-back mode on Cyrix/NSC processor.
[ 0.100000] Enable Memory access reorder on Cyrix/NSC processor.
[ 0.100070] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.110058] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.120037] CPU: NSC Geode(TM) Integrated Processor by National Semi (family: 0x5, model: 0x9, stepping: 0x1)
[...]
In order to continue using modern tools, like ssh, to interact with
the software on these old devices, I need modern builds of the OpenWrt
firmware on the devices. I confirmed that the warm boot hang was still
an issue in modern OpenWrt builds (currently using a patched linux
v6.6.65).
Last night, I decided it was time to get to the bottom of the warm
boot hang, and began bisecting. From preserved builds, I narrowed down
the bisection window from late February to late May 2019. During this
period, the OpenWrt builds were using 4.14.x. I was able to build
using period-correct Ubuntu 18.04.6. After a number of bisection
iterations, I identified a kernel bump from 4.14.112 to 4.14.113 as
the commit that introduced the warm boot hang.
07aaa7e3d6
Looking at the upstream changes in the stable kernel between 4.14.112
and 4.14.113 (tig v4.14.112..v4.14.113), I spotted a likely suspect:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=20afb90f730982882e65b01fb8bdfe83914339c5
So, I tried reverting just that kernel change on top of the breaking
OpenWrt commit, and my warm boot hang went away.
Presumably, the warm boot hang is due to some register not getting
cleared in the same way that a loss of power does. That is
approximately as much as I understand about the problem.
More poking/prodding and coaching from Jonas Gorski, it looks
like this test patch fixes the problem on my board: Tested against
v6.6.67 and v4.14.113.
Fixes: 18fb053f9b ("x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors")
Debugged-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/CAHP3WfOgs3Ms4Z+L9i0-iBOE21sdMk5erAiJurPjnrL9LSsgRA@mail.gmail.com
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d253726ff7106b39a44483b6864398bba8a2f74 ]
Non IP flow, with vlan tag not working as expected while
running below command for vlan-priority. fixed that.
ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0
Fixes: 1274daede3 ("net: mvpp2: cls: Add steering based on vlan Id and priority.")
Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de2c211868b9424f9aa9b3432c4430825bafb41b ]
We found an issue when using bpf_redirect with ipvs NAT mode after
commit ff70202b2d1a ("dev_forward_skb: do not scrub skb mark within
the same name space"). Particularly, we use bpf_redirect to return
the skb directly back to the netif it comes from, i.e., xnet is
false in skb_scrub_packet(), and then ipvs_property is preserved
and SNAT is skipped in the rx path.
ipvs_property has been already cleared when netns is changed in
commit 2b5ec1a5f9 ("netfilter/ipvs: clear ipvs_property flag when
SKB net namespace changed"). This patch just clears it in spite of
netns.
Fixes: 2b5ec1a5f9 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b0c02f9b8acf2a791e531bbc09acae2d51f4f9b ]
The ES8328 codec driver, which is also used for the ES8388 chip that
appears to have an identical register map, claims that the output can
either take the route from DAC->Mixer->Output or through DAC->Output
directly. To the best of what I could find, this is not true, and
creates problems.
Without DACCONTROL17 bit index 7 set for the left channel, as well as
DACCONTROL20 bit index 7 set for the right channel, I cannot get any
analog audio out on Left Out 2 and Right Out 2 respectively, despite the
DAPM routes claiming that this should be possible. Furthermore, the same
is the case for Left Out 1 and Right Out 1, showing that those two don't
have a direct route from DAC to output bypassing the mixer either.
Those control bits toggle whether the DACs are fed (stale bread?) into
their respective mixers. If one "unmutes" the mixer controls in
alsamixer, then sure, the audio output works, but if it doesn't work
without the mixer being fed the DAC input then evidently it's not a
direct output from the DAC.
ES8328/ES8388 are seemingly not alone in this. ES8323, which uses a
separate driver for what appears to be a very similar register map,
simply flips those two bits on in its probe function, and then pretends
there is no power management whatsoever for the individual controls.
Fair enough.
My theory as to why nobody has noticed this up to this point is that
everyone just assumes it's their fault when they had to unmute an
additional control in ALSA.
Fix this in the es8328 driver by removing the erroneous direct route,
then get rid of the playback switch controls and have those bits tied to
the mixer's widget instead, which until now had no register to play
with.
Fixes: 567e4f9892 ("ASoC: add es8328 codec driver")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250222-es8328-route-bludgeoning-v1-1-99bfb7fb22d9@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa52f15c745ce55261b92873676f64f7348cfe82 ]
Stats calculations involve a RMW to add the stat update to the existing
value. This is currently not protected by any synchronization mechanism,
so data races are possible. Add a spinlock to protect the update. The
reader side could be protected using u64_stats, but we would still need
a spinlock for the update side anyway. And we always do an update
immediately before reading the stats anyway.
Fixes: 89e5785fc8 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e4427f8f587c4b603475468bb3aee9418574893 ]
After commit 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev")
IPv4 neighbors can be constructed on the blackhole net device, but they
are constructed with an output function (neigh_direct_output()) that
simply calls dev_queue_xmit(). The latter will transmit packets via
'skb->dev' which might not be the blackhole net device if dst_dev_put()
switched 'dst->dev' to the blackhole net device while another CPU was
using the dst entry in ip_output(), but after it already initialized
'skb->dev' from 'dst->dev'.
Specifically, the following can happen:
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb() [...]
ip_output()
skb->dev = skb_dst(skb)->dev
dst_dev_put()
dst->dev = blackhole_netdev
ip_finish_output2()
resolves neigh on dst->dev
neigh_output()
neigh_direct_output()
dev_queue_xmit()
This will result in IPv4 packets being sent without an Ethernet header
via a valid net device:
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on enp9s0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
22:07:02.329668 20:00:40:11:18:fb > 45:00:00:44:f4:94, ethertype Unknown
(0x58c6), length 68:
0x0000: 8dda 74ca f1ae ca6c ca6c 0098 969c 0400 ..t....l.l......
0x0010: 0000 4730 3f18 6800 0000 0000 0000 9971 ..G0?.h........q
0x0020: c4c9 9055 a157 0a70 9ead bf83 38ca ab38 ...U.W.p....8..8
0x0030: 8add ab96 e052 .....R
Fix by making sure that neighbors are constructed on top of the
blackhole net device with an output function that simply consumes the
packets, in a similar fashion to dst_discard_out() and
blackhole_netdev_xmit().
Fixes: 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Fixes: 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev")
Reported-by: Florian Meister <fmei@sfs.com>
Closes: https://lore.kernel.org/netdev/20250210084931.23a5c2e4@hermes.local/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250220072559.782296-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7a4f98c11fbeb18ed21f3b3a497e90a50ad2e0 ]
There is a warning about unused variables when building with W=1 and no procfs:
net/sunrpc/cache.c:1660:30: error: 'cache_flush_proc_ops' defined but not used [-Werror=unused-const-variable=]
1660 | static const struct proc_ops cache_flush_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~~
net/sunrpc/cache.c:1622:30: error: 'content_proc_ops' defined but not used [-Werror=unused-const-variable=]
1622 | static const struct proc_ops content_proc_ops = {
| ^~~~~~~~~~~~~~~~
net/sunrpc/cache.c:1598:30: error: 'cache_channel_proc_ops' defined but not used [-Werror=unused-const-variable=]
1598 | static const struct proc_ops cache_channel_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~~~~
These are used inside of an #ifdef, so replacing that with an
IS_ENABLED() check lets the compiler see how they are used while
still dropping them during dead code elimination.
Fixes: dbf847ecb6 ("knfsd: allow cache_register to return error on failure")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c8ecc98f5c65947b0070a24bac11e12e47cc65d upstream.
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held)
Cc: stable@vger.kernel.org
Fixes: c833484e5f ("batman-adv: ELP - compute the metric based on the estimated throughput")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7e34ffc976aaae4f465b7898303241b81ceefc3 upstream.
If a temporary error happened in the evaluation of the neighbor throughput
information, then the invalid throughput result should not be stored in the
throughtput EWMA.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d1f86610f23b0bc334d6506a186f21a98f51392 upstream.
Allows the LED on the dedicated mute button on the HP ProBook 450 G4
laptop to change colour correctly.
Signed-off-by: John Veness <john-linux@pelago.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/2fb55d48-6991-4a42-b591-4c78f2fad8d7@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 878e7b11736e062514e58f3b445ff343e6705537 upstream.
Add check for the return value of nfp_app_ctrl_msg_alloc() in
nfp_bpf_cmsg_alloc() to prevent null pointer dereference.
Fixes: ff3d43f756 ("nfp: bpf: implement helpers for FW map ops")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250218030409.2425798-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b0d6b0a199c5a3ee6c72f5e61681ed6f759612 upstream.
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
Fixes: 4fb0a5eb36 ("tee: add OP-TEE driver")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3fb3cb4350befc4f901c54e0cb4a2a47b1302e08 ]
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd91 ("power: Add support for DA9150 Fuel-Gauge")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69ab34f705fbfabcace64b5d53bb7a4450fac875 ]
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb6c ("flow_dissector: Fix to use new variables for port ranges in bpf hook")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5796862c692ea608d96f0a1437f9290f44953a ]
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d85bb069152b790caad905fa53e6d50cd3734d ]
So it can be used for port range filter offloading.
Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 3e5796862c69 ("flow_dissector: Fix handling of mixed port and port-range keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62fab6eef61f245dc8797e3a6a5b890ef40e8628 ]
As explained in the previous patch, iterating for_each_netdev() and
gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink()
twice for the same device.
If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption
splat in the 2nd call of geneve_dellink().
Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate
that part to default_device_exit_batch().
Fixes: 9593172d93b9 ("geneve: Fix use-after-free in geneve_find_dev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250217203705.40342-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d262a192d38e527faa5984629aabda2e0d1c4f54 ]
Erhard reported the following KASAN hit while booting his PowerMac G4
with a KASAN-enabled kernel 6.13-rc6:
BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8
Write of size 8 at addr f1000000 by task chronyd/1293
CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2
Tainted: [W]=WARN
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable)
[c24375b0] [c0504998] print_report+0xdc/0x504
[c2437610] [c050475c] kasan_report+0xf8/0x108
[c2437690] [c0505a3c] kasan_check_range+0x24/0x18c
[c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8
[c24376c0] [c004c014] patch_instructions+0x15c/0x16c
[c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c
[c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac
[c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec
[c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478
[c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14
[c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4
[c24379d0] [c027111c] do_seccomp+0x3dc/0x1890
[c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420
[c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c
--- interrupt: c00 at 0x5a1274
NIP: 005a1274 LR: 006a3b3c CTR: 005296c8
REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4)
MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000
GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932
GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57
GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002
GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001
NIP [005a1274] 0x5a1274
LR [006a3b3c] 0x6a3b3c
--- interrupt: c00
The buggy address belongs to the virtual mapping at
[f1000000, f1002000) created by:
text_area_cpu_up+0x20/0x190
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30
flags: 0x80000000(zone=2)
raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f08816b ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250112135832.57c92322@yea/
Fixes: 37bc3e5fd7 ("powerpc/lib/code-patching: Use alternate map for patch_instruction()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/06621423da339b374f48c0886e3a5db18e896be8.1739342693.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61bcc752d1b81fde3cae454ff20c1d3c359df500 ]
Rewrite __real_pte() and __rpte_to_hidx() as static inline in order to
avoid following warnings/errors when building with 4k page size:
CC arch/powerpc/mm/book3s64/hash_tlb.o
arch/powerpc/mm/book3s64/hash_tlb.c: In function 'hpte_need_flush':
arch/powerpc/mm/book3s64/hash_tlb.c:49:16: error: variable 'offset' set but not used [-Werror=unused-but-set-variable]
49 | int i, offset;
| ^~~~~~
CC arch/powerpc/mm/book3s64/hash_native.o
arch/powerpc/mm/book3s64/hash_native.c: In function 'native_flush_hash_range':
arch/powerpc/mm/book3s64/hash_native.c:782:29: error: variable 'index' set but not used [-Werror=unused-but-set-variable]
782 | unsigned long hash, index, hidx, shift, slot;
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501081741.AYFwybsq-lkp@intel.com/
Fixes: ff31e10546 ("powerpc/mm/hash64: Store the slot information at the right offset for hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e0d340a5b7bd478ecbf245d826e6ab2778b74e06.1736706263.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae4f16f7d7b59cca55aeca6db7c9636ffe7fbaa ]
The stub versions of __real_pte() etc are only used with HPT & 4K pages,
so move them into the hash-4k.h header.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240821080729.872034-1-mpe@ellerman.id.au
Stable-dep-of: 61bcc752d1b8 ("powerpc/64s: Rewrite __real_pte() and __rpte_to_hidx() as static inline")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ab37fcb42832cdd3e9d5e50653285ca84d6686f ]
When using USB MIDI, a lock is attempted to be acquired twice through a
re-entrant call to f_midi_transmit, causing a deadlock.
Fix it by using queue_work() to schedule the inner f_midi_transmit() via
a high priority work queue from the completion handler.
Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/
Fixes: d5daf49b58 ("USB: gadget: midi: add midi function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Jill Donahue <jilliandonahue58@gmail.com>
Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8653d71ce3763aedcf3d2331f59beda3fecd79e4 ]
Currently a tasklet is used to transmit input substream buffer
data. However, tasklets have long been deprecated as being too
heavy on the system by running in irq context - and this is not
a performance critical path. If a higher priority process wants
to run, it must wait for the tasklet to finish before doing so.
Deferring work to a workqueue and executing in process context
should be fine considering the callback already does
f_midi_do_transmit() under the transmit_lock and thus changes in
semantics are ok regarding concurrency - tasklets being serialized
against itself.
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210111042855.73289-1-dave@stgolabs.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4ab37fcb4283 ("USB: gadget: f_midi: f_midi_complete to call queue_work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6148c10f6b62a6df782d26522921f70cc8bf1d7f ]
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200817090209.26351-5-allen.cryptic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4ab37fcb4283 ("USB: gadget: f_midi: f_midi_complete to call queue_work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 ]
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 461ee467507cb98a348fa91ff8460908bb0ea423 ]
Since EP0 transactions need to be completed before the controller halt
sequence is finished, this may take some time depending on the host and the
enabled functions. Increase the controller halt timeout, so that we give
the controller sufficient time to handle EP0 transfers.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-4-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: d3a8c28426fc ("usb: dwc3: Fix timeout issue during controller enter/exit from halt state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ade81479c7dda1ce3eedb215c78bc615bbd04f06 ]
A soft lockup issue was found in the product with about 56,000 tasks were
in the OOM cgroup, it was traversing them when the soft lockup was
triggered.
watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066]
CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G
Hardware name: Huawei Cloud OpenStack Nova, BIOS
RIP: 0010:console_unlock+0x343/0x540
RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247
RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040
R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0
R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
vprintk_emit+0x193/0x280
printk+0x52/0x6e
dump_task+0x114/0x130
mem_cgroup_scan_tasks+0x76/0x100
dump_header+0x1fe/0x210
oom_kill_process+0xd1/0x100
out_of_memory+0x125/0x570
mem_cgroup_out_of_memory+0xb5/0xd0
try_charge+0x720/0x770
mem_cgroup_try_charge+0x86/0x180
mem_cgroup_try_charge_delay+0x1c/0x40
do_anonymous_page+0xb5/0x390
handle_mm_fault+0xc4/0x1f0
This is because thousands of processes are in the OOM cgroup, it takes a
long time to traverse all of them. As a result, this lead to soft lockup
in the OOM process.
To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks'
function per 1000 iterations. For global OOM, call
'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.
Link: https://lkml.kernel.org/r/20241224025238.3768787-1-chenridong@huaweicloud.com
Fixes: 9cbb78bb31 ("mm, memcg: introduce own oom handler to iterate only over its own threads")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ba14deb40a9e9668ec5e66a341ed657e5215c2 ]
The current implementation of the mark_victim tracepoint provides only the
process ID (pid) of the victim process. This limitation poses challenges
for userspace tools requiring real-time OOM analysis and intervention.
Although this information is available from the kernel logs, it’s not
the appropriate format to provide OOM notifications. In Android, BPF
programs are used with the mark_victim trace events to notify userspace of
an OOM kill. For consistency, update the trace event to include the same
information about the OOMed victim as the kernel logs.
- UID
In Android each installed application has a unique UID. Including
the `uid` assists in correlating OOM events with specific apps.
- Process Name (comm)
Enables identification of the affected process.
- OOM Score
Will allow userspace to get additional insight of the relative kill
priority of the OOM victim. In Android, the oom_score_adj is used to
categorize app state (foreground, background, etc.), which aids in
analyzing user-perceptible impacts of OOM events [1].
- Total VM, RSS Stats, and pgtables
Amount of memory used by the victim that will, potentially, be freed up
by killing it.
[1] https://cs.android.com/android/platform/superproject/main/+/246dc8fc95b6d93afcba5c6d6c133307abb3ac2e:frameworks/base/services/core/java/com/android/server/am/ProcessList.java;l=188-283
Signed-off-by: Carlos Galo <carlosgalo@google.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d2bb9a74b2877f100637d6ab5685bcd33c69d44 ]
Two more fixes:
* some test vectors in commit 79e6e2f3f3ff ("crypto: testmgr - populate
RSA CRT parameters in RSA test vectors") had misplaced commas, which
break the test and trigger KASAN warnings at least on x86-64
* pkcs1pad test vector did not have its CRT parameters
Fixes: 79e6e2f3f3ff ("crypto: testmgr - populate RSA CRT parameters in RSA test vectors")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79e6e2f3f3ff345947075341781e900e4f70db81 ]
Changes from v1:
* replace some accidental spaces with tabs
In commit f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem
for faster private key operations") we have started to use the additional
primes and coefficients for RSA private key operations. However, these
additional parameters are not present (defined as 0 integers) in the RSA
test vectors.
Some parameters were borrowed from OpenSSL, so I was able to find the
source. I could not find the public source for 1 vector though, so had to
recover the parameters by implementing Appendix C from [1].
[1]: https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Br1.pdf
Fixes: f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem for faster private key operations")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb8f125253843c445b70fc6ef4fb21aa7b25625 ]
According to PKCS#1 standard, the 'otherPrimeInfos' field contains
the information for the additional primes r_3, ..., r_u, in order.
It shall be omitted if the version is 0 and shall contain at least
one instance of OtherPrimeInfo if the version is 1, see:
https://www.rfc-editor.org/rfc/rfc3447#page-44
Replace the version number '1' with 0, otherwise, some drivers may
not pass the run-time tests.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9887010ed2da3fddaff83ceec80e2b71be8a966 ]
According to the BER encoding rules, integer value should be encoded
as two's complement, and if the highest bit of a positive integer
is 1, should add a leading zero-octet.
The kernel's built-in RSA algorithm cannot recognize negative numbers
when parsing keys, so it can pass this test case.
Export the key to file and run the following command to verify the
fix result:
openssl asn1parse -inform DER -in /path/to/key/file
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
