This adds support for manipulating the L2 forwarding database (dump,
add, delete) for the second generation of NXP SJA1105 switches.
At the moment only FDB entries installed statically through 'bridge fdb'
are visible in the dump callback - the dynamically learned ones are
still under investigation.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Management routes are one-shot FDB rules installed on the CPU port for
sending link-local traffic. They are a prerequisite for STP, PTP etc to
work.
Also make a note that removing a management route was not supported on
the previous generation of switches.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conceptually, if an entry is not found in the requested hardware table,
it is not an invalid request - so change the error returned
appropriately.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are needed in order to implement the switchdev FDB callbacks.
Compared to the E/T generation, not only the ABI (bit offsets) is
different, but also the introduction of the HOSTCMD field which permits
O(1) TCAM search for an FDB entry. Make use of the newly introduce
OP_SEARCH to permit that. It will be used while adding and deleting an
FDB entry (to see whether it exists or not).
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA callbacks were written with the E/T (first generation) in mind,
which is quite different.
For P/Q/R/S completely new implementations need to be provided, which
are held as function pointers in the priv->info structure. We are
taking a slightly roundabout way for this (a function from
sja1105_main.c reads a structure defined in sja1105_spi.c that
points to a function defined in sja1105_main.c), but it is what it is.
The FDB dump callback works for both families, hence no function pointer
for that.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only a single dynamic configuration table of the SJA1105 P/Q/R/S
supports this operation: the FDB.
To keep the existing structure in place (sja1105_dynamic_config_read and
sja1105_dynamic_config_write) and not introduce any new function, a
convention is made for sja1105_dynamic_config_read that a negative index
argument denotes a search for the entry provided as argument.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This appends to the L2 Forwarding and L2 Forwarding Parameters tables
(originally added for first-generation switches) the bits that are new
in the second generation.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was inadvertently copied from the SJA1105 E/T structure and not
tested. Cross-checking with the P/Q/R/S documentation (UM11040) makes
it immediately obvious what the correct bit offsets for this field are.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This structure is merely an implementation detail and should be hidden
from the sja1105_dynamic_config.h header, which provides to the rest of
the driver an abstract access to the dynamic configuration interface of
the switch.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid reducing the support mask as a result of the interface type
selected for SFP modules, or when setting the link settings through
ethtool - this should only change when the supported link modes of
the hardware combination change.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following error occurs for the `make ARCH=arm64 checkstack` case:
aarch64-linux-gnu-objdump -d vmlinux $(find . -name '*.ko') | \
perl ./scripts/checkstack.pl arm64
wrong or unknown architecture "arm64"
As suggested by Masahiro Yamada, fix the above error using regular
expressions in the same way it was fixed for the `ARCH=x86` case via
commit fda9f9903b ("scripts/checkstack.pl: automatically handle
32-bit and 64-bit mode for ARCH=x86").
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The buildtar script might want to invoke a make, so tell the parent
make to pass the jobserver token pipe to the subcommand by prefixing
the command with a +.
This addresses the issue seen here:
/bin/sh ../scripts/package/buildtar tar-pkg
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
See https://www.gnu.org/software/make/manual/html_node/Job-Slots.html
for more information.
Signed-off-by: Trevor Bourget <tgb.kernel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Adding SPDX license identifier is pretty safe; however, here is one
exception.
Since commit ec8f24b7fa ("treewide: Add SPDX license identifier -
Makefile/Kconfig"), "make testconfig" would not pass.
When Kconfig detects a circular file inclusion, it displays error
messages with a file name and a line number prefixed to each line.
The unit test checks if Kconfig emits the error messages correctly
(this also checks the line number correctness).
Now that the test input has the SPDX license identifier at the very top,
the line numbers in the expected stderr should be incremented by 1.
Fixes: ec8f24b7fa ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Current implementation of kselftest-merge only finds config files that
are one level deep using `$(srctree)/tools/testing/selftests/*/config`.
Often, config files are added in nested directories, and do not get
picked up by kselftest-merge.
Use `find` to catch all config files under
`$(srctree)/tools/testing/selftests` instead.
Signed-off-by: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The WRITE ZEROES command has no data transfer so that we need to
initialize the struct (nvmet_req *req)->data_len to 0x0. While
(nvmet_req *req)->transfer_len is initialized in nvmet_req_init(),
data_len will be initialized by nowhere which might cause the failure
with status code NVME_SC_SGL_INVALID_DATA | NVME_SC_DNR randomly. It's
because nvmet_req_execute() checks like:
if (unlikely(req->data_len != req->transfer_len)) {
req->error_loc = offsetof(struct nvme_common_command, dptr);
nvmet_req_complete(req, NVME_SC_SGL_INVALID_DATA | NVME_SC_DNR);
} else
req->execute(req);
This patch fixes req->data_len not to be a randomly assigned by
initializing it to 0x0 when preparing the command in
nvmet_bdev_parse_io_cmd().
nvmet_file_parse_io_cmd() which is for file-backed I/O has already
initialized the data_len field to 0x0, though.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Since I do no longer have access to any STEC SSDs, hand over
maintainership of the skd driver to Damien who still has access to
STEC SSDs.
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whilst testing the capture functionality of the i2s on the newer
SoCs it was noticed that the recording was somewhat distorted.
This was due to the offset not being set correctly on the receiver
side.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Although not causing any noticeable issues, the mask for the
channel offset is covering too many bits.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix gcc build error while CONFIG_I2C is not set
sound/soc/codecs/da7219.c:2640:1: warning: data definition has no type or storage class
module_i2c_driver(da7219_i2c_driver);
^~~~~~~~~~~~~~~~~
sound/soc/codecs/da7219.c:2640:1: error: type defaults to int in declaration of module_i2c_driver [-Werror=implicit-int]
sound/soc/codecs/da7219.c:2640:1: warning: parameter names (without types) in function declaration
sound/soc/codecs/da7219.c:2629:26: warning: da7219_i2c_driver defined but not used [-Wunused-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 6d817c0e9f ("ASoC: codecs: Add da7219 codec driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
while building without PCI:
sound/soc/sof/intel/hda.o: In function `hda_dsp_probe':
hda.c:(.text+0x79c): undefined reference to `pci_ioremap_bar'
hda.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar'
hda.c:(.text+0x7c4): undefined reference to `pci_ioremap_bar'
hda.c:(.text+0x7c4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e13ef82a9a ("ASoC: SOF: add COMPILE_TEST for PCI options")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz
resolution in order to avoid the tiny System Control Processor spending
aeons trying to calculate exact PLL coefficients. This means that modes
like my oddball 1600x1200 with 130.89MHz clock get rejected since the
rate cannot be matched exactly. In practice, though, this mode works
quite happily with the clock at 131MHz, so let's relax the check to
allow a little bit of slop.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Rather than allowing any old mode through, then subsequently refusing
unmatchable clock rates in atomic_check when it's too late to back out
and pick a different mode, let's do that validation up-front where it
will cause unsupported modes to be correctly pruned in the first place.
This also eliminates an issue whereby a perceived clock rate of 0 would
cause atomic disable to fail and prevent the module from being unloaded.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This patch trying to fix monitor freeze issue caused by drm error
'flip_done timed out' on LS1028A platform. this set try is make a loop
around the second setting CVAL and try like 5 times before giveing up.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Fixing the DMA mapping sg segment warning, which shows "DMA-API: mapping
sg segment longer than device claims to support [len=921600] [max=65536]".
Fixed by setting the max segment size at Komeda driver.
This patch depends on:
- https://patchwork.freedesktop.org/series/54448/
- https://patchwork.freedesktop.org/series/54449/
- https://patchwork.freedesktop.org/series/54450/
- https://patchwork.freedesktop.org/series/58976/
Changes since v1:
- Adds member description
- Adds patch denpendency in the comment
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The trace buffer address is 40 bits wide.
The end of the buffer is set in the RWP register (lower 32 bits), and in
the RWPHI register (upper 8 bits).
Currently only the lower 32 bits are read, and this patch fixes it and
concatenates the upper 8 bits to the output address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In the case of a normal sync update, the preparation of framebuffers (be
it calling drm_atomic_helper_prepare_planes() or doing setups with
drm_framebuffer_get()) are performed in the new_state and the respective
cleanups are performed in the old_state.
In the case of async updates, the preparation is also done in the
new_state but the cleanups are done in the new_state (because updates
are performed in place, i.e. in the current state).
The current code blocks async udpates when the fb is changed, turning
async updates into sync updates, slowing down cursor updates and
introducing regressions in igt tests with errors of type:
"CRITICAL: completed 97 cursor updated in a period of 30 flips, we
expect to complete approximately 15360 updates, with the threshold set
at 7680"
Fb changes in async updates were prevented to avoid the following scenario:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong)
Where we have a single call to prepare fb2 but double cleanup call to fb2.
To solve the above problems, instead of blocking async fb changes, we
place the old framebuffer in the new_state object, so when the code
performs cleanups in the new_state it will cleanup the old_fb and we
will have the following scenario instead:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2
Where calls to prepare/cleanup are balanced.
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 25dc194b34 ("drm: Block fb changes for async plane updates")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-6-helen.koike@collabora.com
Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.
Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new
fb and put the old fb) is not required, as it's taken care by
drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane().
Cc: <stable@vger.kernel.org> # v4.19+
Fixes: 539c320bfa ("drm/vc4: update cursors asynchronously through atomic")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com
Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 224a4c9709 ("drm/msm: update cursors asynchronously through atomic")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-4-helen.koike@collabora.com
Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.
Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new
fb and put the old fb) is not required, as it's taken care by
drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane().
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 674e78acae ("drm/amd/display: Add fast path for cursor plane updates")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-3-helen.koike@collabora.com
In the case of async update, modifications are done in place, i.e. in the
current plane state, so the new_state is prepared and the new_state is
cleaned up (instead of the old_state, unlike what happens in a
normal sync update).
To cleanup the old_fb properly, it needs to be placed in the new_state
in the end of async_update, so cleanup call will unreference the old_fb
correctly.
Also, the previous code had a:
plane_state = plane->funcs->atomic_duplicate_state(plane);
...
swap(plane_state, plane->state);
if (plane->state->fb && plane->state->fb != new_state->fb) {
...
}
Which was wrong, as the fb were just assigned to be equal, so this if
statement nevers evaluates to true.
Another details is that the function drm_crtc_vblank_get() can only be
called when vop->is_enabled is true, otherwise it has no effect and
trows a WARN_ON().
Calling drm_atomic_set_fb_for_plane() (which get a referent of the new
fb and pus the old fb) is not required, as it is taken care by
drm_mode_cursor_universal() when calling
drm_atomic_helper_update_plane().
Fixes: 15609559a8 ("drm/rockchip: update cursors asynchronously through atomic.")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-2-helen.koike@collabora.com
There's no reason to request physically contiguous memory for those
allocations.
[boris: added CC to stable]
Cc: stable@vger.kernel.org
Reported-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.
In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:
1. mtk_dsi_encoder_disable()
--> mtk_output_dsi_disable()
--> mtk_dsi_stop(); /* sometimes make vblank timeout in
atomic_disable */
--> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
--> drm_crtc_wait_one_vblank();
...
--> mtk_dsi_ddp_stop()
--> mtk_dsi_poweroff();
mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.
Fixes: 0707632b5b ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
num_pipes is used for mutex created in mtk_drm_crtc_create(). If we
don't clear num_pipes count, when rebinding driver, the count will
be accumulated. From mtk_disp_mutex_get(), there can only be at most
10 mutex id. Clear this number so it starts from 0 in every rebind.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
shutdown all CRTC when unbinding drm driver.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Unbinding components (i.e. mtk_dsi and mtk_disp_ovl/rdma/color) will
trigger master(mtk_drm)'s .unbind(), and currently mtk_drm's unbind
won't actually unbind components. During the next bind,
mtk_drm_kms_init() is called, and the components are added back.
.unbind() should call mtk_drm_kms_deinit() to unbind components.
And since component_master_del() in .remove() will trigger .unbind(),
which will also unregister device, it's fine to remove original functions
called here.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.
Fixes: 2e54c14e31 ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Heiner Kallweit says:
====================
r8169: make firmware handling code ready to be factored out
This series contains the final steps to make firmware handling code
ready to be factored out into a separate source code file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rtl_fw_request_firmware and rtl_fw_release_firmware which will be
part of the API when factoring out the firmware handling code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of factoring out the firmware handling code avoid any
usage of struct rtl8169_private internals. As part of it we can inline
rtl_check_firmware.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to rtl_fw_data_ok() we can simplify the code by moving
incrementing the index to the for loop initialization.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the firmware opcode defines with a proper enum. The BUG()
in rtl_fw_write_firmware() can be removed because the call to
rtl_fw_data_ok() ensures all opcodes are valid.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
code optimizations & bugfixes for HNS3 driver
This patch-set includes code optimizations and bugfixes for the HNS3
ethernet controller driver.
[patch 1/10] removes the redundant core reset type
[patch 2/10 - 3/10] fixes two VLAN related issues
[patch 4/10] fixes a TM issue
[patch 5/10 - 10/10] includes some patches related to RAS & MSI-X error
Change log:
V1->V2: removes two patches which needs to change HNS's infiniband
driver as well, they will be upstreamed later with the
infiniband's one.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All RAS and MSI-X should be enabled just in the final stage of HNS3
initialization. It means that they should be enabled in
hclge_init_xxx_client_instance instead of hclge_ae_dev(). Especially
MSI-X, if it is enabled before opening vector0 IRQ, there are some
chances that a MSI-X error will cause failure on initialization of
NIC client instane. So this patch delays enabling of HW errors.
Otherwise, we also separate enabling of ROCE RAS from NIC, because
it's not reasonable to enable ROCE RAS if we even don't have a ROCE
driver.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are four commands being used to query and clear RAS and MSI-X
interrupts status. They should be contained in array of special opcodes
because these commands have several descriptors, and we need to judge
return value in the first descriptor rather than the last one as other
opcodes. In addition, we shouldn't set the NEXT_FLAG of first descriptor.
This patch fixes above issues.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We shouldn't set HNAE3_NONE_RESET bit of the variable that represents a
reset request during handling of MSI-X errors, or may cause issue when
trigger reset.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LINK_UP and LINK_DOWN are two bits of MAC tunnel interrupts, but previous
HNS3 driver didn't handle them. If they were enabled, value of these two
bits will change during link down and link up, which will cause HNS3
driver keep receiving IRQ but can't handle them.
This patch adds handling of these two bits of interrupts, we will record
and clear them as what we do to other MAC tunnel interrupts.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hclge/hclgevf and hns3 module can be unloaded independently,
when hclge/hclgevf unloaded firstly, the ops of ae_dev should
be set to NULL, otherwise it will cause an use-after-free problem.
Fixes: 38caee9d3e ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we add a VF without loading hclgevf.ko and then there is a RAS error
occurs, PCIe AER will call error_detected and slot_reset of all functions,
and will get a NULL pointer when we check ad_dev->ops->handle_hw_ras_error.
This will cause a call trace and failures on handling of follow-up RAS
errors.
This patch check ae_dev and ad_dev->ops at first to solve above issues.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets the port shaper according to the MAC speed as
suggested by hardware user manual.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
