Commit 323ebb61e3 ("net: use listified RX for handling GRO_NORMAL
skbs") made use of listified skb processing for the users of
napi_gro_frags().
The same technique can be used in a way more common napi_gro_receive()
to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers
including gro_cells and mac80211 users.
This slightly changes the return value in cases where skb is being
dropped by the core stack, but it seems to have no impact on related
drivers' functionality.
gro_normal_batch is left untouched as it's very individual for every
single system configuration and might be tuned in manual order to
achieve an optimal performance.
Signed-off-by: Alexander Lobakin <[email protected]>
Acked-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Bug: 167477898
Change-Id: Ie9e079cf9a5799ca2c4924848ca6b3caeef056d7
(cherry picked from commit 6570bc79c0dfff0f228b7afd2de720fb4e84d61d)
[hyunsoon: fix conflicts in net/core/dev.c]
Signed-off-by: Hyunsoon Kim <[email protected]>
This change is for general scheduler improvement.
Change-Id: Id1692f724f2efd22ada3365cebd154f1999930b5
Signed-off-by: Pavankumar Kondeti <[email protected]>
Make the iommu clocks list dynamic so that we
can add new clocks to the list whenever needed.
Change-Id: I7a742c709d0bdc59d4f578329f7019959d4edb46
Signed-off-by: Nitheesh Muthuraj <[email protected]>
To help with power savings, disable haptics module when the device
enters suspend and enable it when it exits suspend.
Change-Id: I8956be849b876a2b514c1de49f8ff447267d28a1
Signed-off-by: Subbaraman Narayanamurthy <[email protected]>
Signed-off-by: Fenglin Wu <[email protected]>
During clock gating, after clocks are disabled, put hba into LPM to save
more power.
Change-Id: I1d8d76f3b72a2346c9ab6268555b0b416cb3b16f
Signed-off-by: Can Guo <[email protected]>
Add a function md_get_region which returns md_region
when we pass minidump entry name to it.
Change-Id: Ibbd84737041c5b1c25cc46b9c740d415978de7e6
Signed-off-by: Vijayanand Jitta <[email protected]>
Enable CONFIG_QCOM_INITIAL_LOGBUF for lahaina. This enables
copying of dmesg logs into separate buffer at 100 sec from
bootup.
Change-Id: I3ae2e1d5eca1a1eab42aa2161f9c0a7696497998
Signed-off-by: Prateek Sood <[email protected]>
Enable L3 interconnect driver so that consumers are
able to obtain their path handles properly.
Change-Id: I92b407621e6c65563e5e88b63cf6b776329657cb
Signed-off-by: Odelu Kukatla <[email protected]>
Configure proper sleep state and touch works correctly
when device resume.
Change-Id: I06fc1dfd281cfa297fb8698a5b350aa062d603b2
Signed-off-by: Fei Mao <[email protected]>
Add support for dumping active modules information,
in minidump registered region.
Change-Id: Id8e81ea7beae425a1a0f68f91a8cf9aa093b8011
Signed-off-by: Neeraj Upadhyay <[email protected]>
Add minidump entry and dump memory around addresses
contained in registers in panic.
Change-Id: Id4857e3b08838838d8aa3a51cb9d6961be37b579
Signed-off-by: Neeraj Upadhyay <[email protected]>
Add minidump collection for cpu runqueues, on panic.
Change-Id: Ib9d313c25cb53547fff075587b3fdd9297a74756
Signed-off-by: Neeraj Upadhyay <[email protected]>
Register and dump ftrace buffer on kernel panic, to minidump
table. The dumps are collected in parsed format.
Change-Id: I10605467d2b566425cc2cb4fd67dbc59fcd592e7
Signed-off-by: Neeraj Upadhyay <[email protected]>
Both eMMC and UFS share the regulators (vdd & vdd-io).
On UFS based devices this regulator can be turned off after the eMMC
probe fails.
Override vdd-io-always-on flag as false.
Change-Id: I2e2abb14512d5e3f8fc0cb67d1aa734c78674cfa
Signed-off-by: Sarthak Garg <[email protected]>
PIL secures pages are using direct scm call, mark these pages using a magic
flag so that it can be easily identified.
add one check for removing carve out pages, that's already excluded.
Change-Id: If75ab6b4537323e7202c1dd52e2e6677cb61e437
Signed-off-by: Zhenhua Huang <[email protected]>
The codec interface node is allocated during the codec
addition during dp connect. These changes will free the
node after the dp disconnect.
Change-Id: I6f1fc5639f1a5fa61ef04557b888b3389800dce1
Signed-off-by: Sankeerth Billakanti <[email protected]>
Apply the configuration to force HFRC off when WLED module
is disabled.
Change-Id: Iff1df47fd26a620664087eb4c9140cc4e45251bc
Signed-off-by: Kiran Gunda <[email protected]>
The change limits the low_latency flag selection to binder
transactions of the foreground high priority tasks.
Change-Id: Id191e63ba2ccf5537cb45711c20bc22831129a18
Signed-off-by: Kishore Sri venkata Ganesh Bolisetty <[email protected]>
Enable QoS for the master ports on Shima with predefined
values for priority and urgency.
Change-Id: I587306831ef3dea0855230d4316a68060f9f223b
Signed-off-by: Odelu Kukatla <[email protected]>
Correct scaling function for SMB1398 to ensure
temperature is calculated accurately.
Change-Id: I7ec497ef9d1171da7a08a97730912727c583830a
Signed-off-by: Jishnu Prakash <[email protected]>
During SPSS firmware update by fota, SPSS SSR causes cryptographic erase
of Secure Processor user data. To mitigate this, instead of related
SSR, platform reboot requested during fota update. In the end of fota
update, SPSS SSR re-enabled.
This change adds ioctl() to update internal driver configuration
(functionally disable or enable SSR).
Change-Id: I1d8362b4691e1a335f7f1f29bc2358d3f9b1cb21
Signed-off-by: Konstantin Dorfman <[email protected]>
Signed-off-by: Nurit Lichtenstein <[email protected]>
commit fce2ff728f95b8894db14f51c9274dc56c37616f upstream.
In nl80211_set_station(), we check NL80211_ATTR_HE_6GHZ_CAPABILITY
and then use NL80211_ATTR_HE_CAPABILITY, which is clearly wrong.
Fix this to use NL80211_ATTR_HE_6GHZ_CAPABILITY as well.
Cc: [email protected]
Fixes: 43e64bf301fd ("cfg80211: handle 6 GHz capability of new station")
Link: https://lore.kernel.org/r/20200805153516.310cef625955.I0abc04dc8abb2c7c005c88ef8fa2d0e3c9fb95c4@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit fce2ff728f95b8894db14f51c9274dc56c37616f)
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Change-Id: Ib3951a485537514e26a9ac70ad9773580ecc4f53
Enable cpufreq hw debug support for HOLI and SHIMA.
Change-Id: I62b3404b918a738addeada83a1069712c55ebc21
Signed-off-by: Jagadeesh Kona <[email protected]>
