[ Upstream commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ]
After commit 71130f29979c ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533 ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ]
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes: ba8d39871a ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6659785dfb3f8d75f1fe637e4222ff8178f5280 ]
For a given byte clock, if VCO recalc value is exactly same as
vco set rate value, vco_set_rate does not get called assuming
VCO is already set to required value. But Due to GDSC toggle,
VCO values are erased in the HW. To make sure VCO is programmed
correctly, we forcefully call set_rate from vco_prepare.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ]
Save pll state before dsi host is powered off. Without this change
some register values gets resetted.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e99b2c625da181aebf1a3d13493e3f7a5057a9c ]
Add a flag to DMA memory allocation to silence a warning.
This driver allocates DMA memory for IO frames. This allocation may exceed
MAX_ORDER pages for few megaraid_sas controllers (controllers with very
high queue depth). Consequently, the driver has logic to keep reducing the
controller queue depth until the DMA memory allocation succeeds.
On impacted megaraid_sas controllers there would be multiple DMA allocation
failures until driver settled on an allocation that fit. These failed DMA
allocation requests caused stack traces in system logs. These were not
harmful and this patch silences those warnings/stack traces.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200204152413.7107-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c320b6ce7510653bce68cecf80cf5b2d67e907f ]
At the moment, only DRM_MODE_ROTATE_180 is allowed when we try to apply
the rotation from the video mode parameters. It is also useful to allow
DRM_MODE_ROTATE_0 in case there is only a reflect option in the video mode
parameter (e.g. video=540x960,reflect_x).
DRM_MODE_ROTATE_0 means "no rotation" and should therefore not require
any special handling, so we can just add it to the if condition.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117153429.54700-3-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6980a727154b793adb218fbc7b4d6af52a7e364 ]
A rotation value should have exactly one rotation angle.
At the moment there is no validation for this when parsing video=
parameters from the command line. This causes problems later on
when we try to combine the command line rotation with the panel
orientation.
To make sure that we generate a valid rotation value:
- Set DRM_MODE_ROTATE_0 by default (if no rotate= option is set)
- Validate that there is exactly one rotation angle set
(i.e. specifying the rotate= option multiple times is invalid)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117153429.54700-2-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ]
I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.
This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).
Thanks as always to Sami for his help narrowing this down.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef8c9809acb0805c991bba8bdd4749fc46d44a98 ]
Add rate limiting of the 'pp done time out' warnings since these
warnings can quickly fill the dmesg buffer.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf01514c5c6efa2d521d35e68dff2e0674d08e91 ]
During device memory memset, the driver allocates and use a CB (command
buffer). To reuse existing code, it keeps a pointer to the CB in two
variables, user_cb and patched_cb. Therefore, there is no need to "put"
both the user_cb and patched_cb, as it will cause an underflow of the
refcnt of the CB.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a37e47192dfa98f79a0cd5ab991c224b5980c982 ]
During hard reset we must not write to the device.
Hence avoid halting CoreSight during user context close if it is done
during hard reset.
In addition, we must not re-enable clock gating afterwards as it was
deliberately disabled in the beginning of the hard reset flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 908087ffbe896c100ed73d5f0ce11a5b7264af4a ]
The driver must halt the engines before doing hard-reset, otherwise the
device can go into undefined state. There is a place where the driver
didn't do that and this patch fixes it.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4bfded56cf39b8d02733c1e6ef546b97961e18a ]
Symptom: application opens /dev/ttyGS0 and starts sending (writing) to
it while either USB cable is not connected, or nobody listens on the
other side of the cable. If driver circular buffer overflows before
connection is established, no data will be written to the USB layer
until/unless /dev/ttyGS0 is closed and re-opened again by the
application (the latter besides having no means of being notified about
the event of establishing of the connection.)
Fix: on open and/or connect, kick Tx to flush circular buffer data to
USB layer.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43d565727a3a6fd24e37c7c2116475106af71806 ]
ffs_aio_cancel() can be called from both interrupt and thread context. Make
sure that the current IRQ state is saved and restored by using
spin_{un,}lock_irq{save,restore}().
Otherwise undefined behavior might occur.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2035411fa1d1206cea7d5dfe833e78481844a76 ]
USB 3.x SuperSpeed peripherals can draw up to 900mA of VBUS power
when in configured state. However, if a configuration wanting to
take advantage of this is added with MaxPower greater than 500
(currently possible if using a ConfigFS gadget) the composite
driver fails to accommodate this for a couple reasons:
- usb_gadget_vbus_draw() when called from set_config() and
composite_resume() will be passed the MaxPower value without
regard for the current connection speed, resulting in a
violation for USB 2.0 since the max is 500mA.
- the bMaxPower of the configuration descriptor would be
incorrectly encoded, again if the connection speed is only
at USB 2.0 or below, likely wrapping around U8_MAX since
the 2mA multiplier corresponds to a maximum of 510mA.
Fix these by adding checks against the current gadget->speed
when the c->MaxPower value is used (set_config() and
composite_resume()) and appropriately limit based on whether
it is currently at a low-/full-/high- or super-speed connection.
Because 900 is not divisible by 8, with the round-up division
currently used in encode_bMaxPower() a MaxPower of 900mA will
result in an encoded value of 0x71. When a host stack (including
Linux and Windows) enumerates this on a single port root hub, it
reads this value back and decodes (multiplies by 8) to get 904mA
which is strictly greater than 900mA that is typically budgeted
for that port, causing it to reject the configuration. Instead,
we should be using the round-down behavior of normal integral
division so that 900 / 8 -> 0x70 or 896mA to stay within range.
And we might as well change it for the high/full/low case as well
for consistency.
N.B. USB 3.2 Gen N x 2 allows for up to 1500mA but there doesn't
seem to be any any peripheral controller supported by Linux that
does two lane operation, so for now keeping the clamp at 900
should be fine.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c363eb48ada5cf732b3f489fab799fc881097842 ]
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87c5cbf71ecbb9e289d60a2df22eb686c70bf196 ]
On AR934x this UART is usually not initialized by the bootloader
as it is only used as a secondary serial port while the primary
UART is a newly introduced NS16550-compatible.
In order to make use of the ar933x-uart on AR934x without RTS/CTS
hardware flow control, one needs to set the
UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
UART is used as primary/console, the bootloader on AR934x typically
doesn't set those bits.
Setting them explicitely on AR933x should not do any harm, so just
set them unconditionally.
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20200207095335.GA179836@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43bcb1c0507858cdc95e425017dcc33f8105df39 ]
snd_hdac_ext_bus_link_get() does not work correctly in case
there are multiple codecs on the bus. It unconditionally
resets the bus->codec_mask value. As per documentation in
hdaudio.h and existing use in client code, this field should
be used to store bit flag of detected codecs on the bus.
By overwriting value of the codec_mask, information on all
detected codecs is lost. No current user of hdac is impacted,
but use of bus->codec_mask is planned in future patches
for SOF.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 153031a301bb07194e9c37466cfce8eacb977621 ]
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4add247789e4ba5e08ad8256183ce2e211877d4 ]
optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe
is on the optimizing_list or unoptimizing_list already. However, since
the following commit:
f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't
work as expected anymore.
The optimized_kprobe could be in the following states:
- [optimizing]: Before inserting jump instruction
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is not empty.
- [optimized]: jump inserted
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is empty.
- [unoptimizing]: Before removing jump instruction (including unused
optprobe)
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is not empty.
- [unoptimized]: jump removed
op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and
op->list is empty.
Current code mis-expects [unoptimizing] state doesn't have
KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results.
To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing]
and [unoptimizing] states and fixes the logic in optimize_kprobe() and
unoptimize_kprobe().
[ mingo: Cleaned up the changelog and the code a bit. ]
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ca501d6aaf21de31541deac35128bbea8427aa6 ]
Clang warns:
../drivers/infiniband/core/security.c:351:41: warning: converting the
enum constant to a boolean [-Wint-in-bool-context]
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX || IB_QP_PORT)) && qp_pps) {
^
1 warning generated.
A bitwise OR should have been used instead.
Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/20200217204318.13609-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/889
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3918e0667bbac99400b44fa5aef3f8be2eeada4a ]
[ 3934.173244] ======================================================
[ 3934.179572] WARNING: possible circular locking dependency detected
[ 3934.185884] 5.4.21-xfstests #1 Not tainted
[ 3934.190151] ------------------------------------------------------
[ 3934.196673] dmsetup/8897 is trying to acquire lock:
[ 3934.201688] ffffffffbce82b18 (shrinker_rwsem){++++}, at: unregister_shrinker+0x22/0x80
[ 3934.210268]
but task is already holding lock:
[ 3934.216489] ffff92a10cc5e1d0 (&pmd->root_lock){++++}, at: dm_pool_metadata_close+0xba/0x120
[ 3934.225083]
which lock already depends on the new lock.
[ 3934.564165] Chain exists of:
shrinker_rwsem --> &journal->j_checkpoint_mutex --> &pmd->root_lock
For a more detailed lockdep report, please see:
https://lore.kernel.org/r/20200220234519.GA620489@mit.edu
We shouldn't need to hold the lock while are just tearing down and
freeing the whole metadata pool structure.
Fixes: 44d8ebf436399a4 ("dm thin metadata: use pool locking at end of dm_pool_metadata_close")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 474a31e13a4e9749fb3ee55794d69d0f17ee0998 ]
We cannot register the same netdev notifier multiple times when probing
stmmac devices. Register the notifier only once in module init, and also
make debugfs creation/deletion safe against simultaneous notifier call.
Fixes: 481a7d154cbb ("stmmac: debugfs entry name is not be changed when udev rename device name.")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98c5f7d44fef309e692c24c6d71131ee0f0871fb ]
We are still experiencing some packet loss with the existing advanced
congestion buffering (ACB) settings with the IMP port configured for
2Gb/sec, so revert to conservative link speeds that do not produce
packet loss until this is resolved.
Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37c0ab029569a75fd180edb03d411e7a28a936f ]
Need to chain the THINKPAD_ACPI, otherwise the mute led will not
work.
Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200219052306.24935-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c59e3a9a5a0b180dd015755d6d18ca31e55935 ]
BFQ maintains an ordered list, implemented with an RB tree, of
head-request positions of non-empty bfq_queues. This position tree,
inherited from CFQ, is used to find bfq_queues that contain I/O close
to each other. BFQ merges these bfq_queues into a single shared queue,
if this boosts throughput on the device at hand.
There is however a special-purpose bfq_queue that does not participate
in queue merging, the oom bfq_queue. Yet, also this bfq_queue could be
wrongly added to the position tree. So bfqq_find_close() could return
the oom bfq_queue, which is a source of further troubles in an
out-of-memory situation. This commit prevents the oom bfq_queue from
being inserted into the position tree.
Tested-by: Patrick Dung <patdung100@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecedd3d7e19911ab8fe42f17b77c0a30fe7f4db3 ]
In bfq_bfqq_move(), the bfq_queue, say Q, to be moved to a new group
may happen to be deactivated in the scheduling data structures of the
source group (and then activated in the destination group). If Q is
referred only by the data structures in the source group when the
deactivation happens, then Q is freed upon the deactivation.
This commit addresses this issue by getting an extra reference before
the possible deactivation, and releasing this extra reference after Q
has been moved.
Tested-by: Chris Evich <cevich@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
kallsyms_lookup_name() and kallsyms_on_each_symbol() are exported to
modules despite having no in-tree users and being wide open to abuse by
out-of-tree modules that can use them as a method to invoke arbitrary
non-exported kernel functions.
Unexport kallsyms_lookup_name() and kallsyms_on_each_symbol().
Bug: 149978696
Change-Id: I8f3c1b5222939c46901f4d149d4c7bb63916ff04
Link: http://lkml.kernel.org/r/20200221114404.14641-4-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Quentin Perret <qperret@google.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit ab3e66797c7fddbf80fbba31c5bf4574ad52f320
https://github.com/hnaz/linux-mm.git master)
Signed-off-by: Quentin Perret <qperret@google.com>
The 'data_breakpoint' test code is the only modular user of
kallsyms_lookup_name(), which was exported as part of fixing the test in
f60d24d2ad ("hw-breakpoints: Fix broken hw-breakpoint sample module").
In preparation for un-exporting this symbol, switch the test over to using
__symbol_get(), which can be used to place breakpoints on exported
symbols.
Bug: 149978696
Change-Id: I589142af97a34484f9fa551b934148f445b33243
Link: http://lkml.kernel.org/r/20200221114404.14641-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit e108898157d888c827a7176e02648cc3bd87025b
https://github.com/hnaz/linux-mm.git master)
Signed-off-by: Quentin Perret <qperret@google.com>
Patch series "Unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()".
Despite having just a single modular in-tree user that I could spot,
kallsyms_lookup_name() is exported to modules and provides a mechanism
for out-of-tree modules to access and invoke arbitrary, non-exported
kernel symbols when kallsyms is enabled.
This patch series fixes up that one user and unexports the symbol along
with kallsyms_on_each_symbol(), since that could also be abused in a
similar manner.
I would like to avoid out-of-tree modules being easily able to call
functions that are not exported. kallsyms_lookup_name() makes this
trivial to the point that there is very little incentive to rework these
modules to either use upstream interfaces correctly or propose
functionality which may be otherwise missing upstream. Both of these
latter solutions would be pre-requisites to upstreaming these modules, and
the current state of things actively discourages that approach.
The background here is that we are aiming for Android devices to be able
to use a generic binary kernel image closely following upstream, with any
vendor extensions coming in as kernel modules. In this case, we (Google)
end up maintaining the binary module ABI within the scope of a single LTS
kernel. Monitoring and managing the ABI surface is not feasible if it
effectively includes all data and functions via kallsyms_lookup_name().
Of course, we could just carry this patch in the Android kernel tree, but
we're aiming to carry as little as possible (ideally nothing) and I think
it's a sensible change in its own right. I'm surprised you object to it,
in all honesty.
Now, you could turn around and say "that's not upstream's problem", but it
still seems highly undesirable to me to have an upstream bypass for
exported symbols that isn't even used by upstream modules. It's ripe for
abuse and encourages people to work outside of the upstream tree. The
usual rule is that we don't export symbols without a user in the tree and
that seems especially relevant in this case.
Joe Lawrence said:
: FWIW, kallsyms was historically used by the out-of-tree kpatch support
: module to resolve external symbols as well as call set_memory_r{w,o}()
: API. All of that support code has been merged upstream, so modern kpatch
: modules* no longer leverage kallsyms by default.
:
: That said, there are still some users who still use the deprecated support
: module with newer kernels, but that is not officially supported by the
: project.
This patch (of 3):
Given the name of a kernel symbol, the 'data_breakpoint' test claims to
"report any write operations on the kernel symbol". However, it creates
the breakpoint using both HW_BREAKPOINT_W and HW_BREAKPOINT_R, which menas
it also fires for read access.
Drop HW_BREAKPOINT_R from the breakpoint attributes.
Bug: 149978696
Change-Id: I12f793136a7187c844841e7dd65b90645d5519f6
Link: http://lkml.kernel.org/r/20200221114404.14641-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 0c1b9251116b972cafa3cf16bd02cb2354535b38
https://github.com/hnaz/linux-mm.git master)
Signed-off-by: Quentin Perret <qperret@google.com>
After FS_IOC_REMOVE_ENCRYPTION_KEY removes a key, it syncs the
filesystem and tries to get and put all inodes that were unlocked by the
key so that unused inodes get evicted via fscrypt_drop_inode().
Normally, the inodes are all clean due to the sync.
However, after the filesystem is sync'ed, userspace can modify and close
one of the files. (Userspace is *supposed* to close the files before
removing the key. But it doesn't always happen, and the kernel can't
assume it.) This causes the inode to be dirtied and have i_count == 0.
Then, fscrypt_drop_inode() failed to consider this case and indicated
that the inode can be dropped, causing the write to be lost.
On f2fs, other problems such as a filesystem freeze could occur due to
the inode being freed while still on f2fs's dirty inode list.
Fix this bug by making fscrypt_drop_inode() only drop clean inodes.
I've written an xfstest which detects this bug on ext4, f2fs, and ubifs.
Fixes: b1c0ec3599 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200305084138.653498-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
(cherry picked from commit 2b4eae95c7361e0a147b838715c8baa1380a428f)
Bug: 150589360
Test: kvm-xfstests -c ext4,f2fs -g encrypt
Change-Id: Ia32db980c2fffb68caeaf9f38e5cfbe781b45011
Signed-off-by: Eric Biggers <ebiggers@google.com>
This was "default y" but disabled manually because we set
CONFIG_EXPERT=y. Disabling it does not seem to be a big win and we have
had requests to enable it.
Bug: 150871026
Change-Id: I4a7f8da1e8480dc46f168def89016a5152e421ea
Signed-off-by: Alistair Delva <adelva@google.com>
Disable CONFIG_DEBUG_DEVRES to fix ABI differences caused by changes to
devres_alloc_node function when this debug option is enabled.
Bug: 151110905
Test: build
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I27ba172843c80ffd1dfbcc6cc4d706c5b18eb5d3
Seems no one has done this in a while :(
Leaf changes summary: 5 artifacts changed
Changed leaf types summary: 1 leaf type changed
Removed/Changed/Added functions summary: 4 Removed, 0 Changed, 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable
4 Removed functions:
[D] 'function void __this_cpu_preempt_check(const char*)'
[D] 'function unsigned int debug_smp_processor_id()'
[D] 'function void preempt_count_add(int)'
[D] 'function void preempt_count_sub(int)'
'struct task_struct at sched.h:624:1' changed:
type size changed from 29184 to 28672 (in bits)
1 data member deletion:
'unsigned long int task_struct::preempt_disable_ip', at offset 18816 (in bits) at sched.h:1070:1
there are data member changes:
'tlbflush_unmap_batch task_struct::tlb_ubc' offset changed from 18880 to 18816 (in bits) (by -64 bits)
offset changed from 18880 to 18816 (in bits) (by -64 bits)
'pipe_inode_info* task_struct::splice_pipe' offset changed from 19008 to 18944 (in bits) (by -64 bits)
'page_frag task_struct::task_frag' offset changed from 19072 to 19008 (in bits) (by -64 bits)
'int task_struct::nr_dirtied' offset changed from 19200 to 19136 (in bits) (by -64 bits)
'int task_struct::nr_dirtied_pause' offset changed from 19232 to 19168 (in bits) (by -64 bits)
'unsigned long int task_struct::dirty_paused_when' offset changed from 19264 to 19200 (in bits) (by -64 bits)
'u64 task_struct::timer_slack_ns' offset changed from 19328 to 19264 (in bits) (by -64 bits)
'u64 task_struct::default_timer_slack_ns' offset changed from 19392 to 19328 (in bits) (by -64 bits)
'unsigned long int task_struct::trace' offset changed from 19456 to 19392 (in bits) (by -64 bits)
'unsigned long int task_struct::trace_recursion' offset changed from 19520 to 19456 (in bits) (by -64 bits)
'mem_cgroup* task_struct::memcg_in_oom' offset changed from 19584 to 19520 (in bits) (by -64 bits)
'gfp_t task_struct::memcg_oom_gfp_mask' offset changed from 19648 to 19584 (in bits) (by -64 bits)
'int task_struct::memcg_oom_order' offset changed from 19680 to 19616 (in bits) (by -64 bits)
'unsigned int task_struct::memcg_nr_pages_over_high' offset changed from 19712 to 19648 (in bits) (by -64 bits)
'mem_cgroup* task_struct::active_memcg' offset changed from 19776 to 19712 (in bits) (by -64 bits)
'request_queue* task_struct::throttle_queue' offset changed from 19840 to 19776 (in bits) (by -64 bits)
'uprobe_task* task_struct::utask' offset changed from 19904 to 19840 (in bits) (by -64 bits)
'int task_struct::pagefault_disabled' offset changed from 19968 to 19904 (in bits) (by -64 bits)
'task_struct* task_struct::oom_reaper_list' offset changed from 20032 to 19968 (in bits) (by -64 bits)
'vm_struct* task_struct::stack_vm_area' offset changed from 20096 to 20032 (in bits) (by -64 bits)
'refcount_t task_struct::stack_refcount' offset changed from 20160 to 20096 (in bits) (by -64 bits)
'void* task_struct::security' offset changed from 20224 to 20160 (in bits) (by -64 bits)
'thread_struct task_struct::thread' offset changed from 20352 to 20224 (in bits) (by -128 bits)
1372 impacted interfaces:
Change-Id: Ie38f13364e737ee552eb7985e11d6af273c5b12a
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Since cpu_hwcaps and cpu_hwcap_keys are exported symbols, reserve
space in them for any future cpu capabilities or erratas.
Bug: 151154716
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I35930dd52d98817831d812f35560a2605804a553
Allow charger manager can be built as a module like other charger
drivers.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/lkml/5e098be25c70e07c37e743f84a901f6f756090e0
.1583461755.git.baolin.wang7@gmail.com/
(cherry picked from commit 241eaabc3c315cdfea505725a43de848f498527f
https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next)
Bug: 148055746
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Change-Id: I2dbe3d09a4779c64ca2508417e819428638a3629
We don't need this. So disable to improve the ABI diff with vendors.
Signed-off-by: Will McVicker <willmcvicker@google.com>
Bug: 148870985
Test: compile test
Change-Id: I70690c8be2c3ffcc77f7c8c1d472be0ffffd0587
Looks like there was a merge issue when pulling the following upstream
change:
https://lore.kernel.org/lkml/7239ddd532e94a4371289f3be23c66a3@codeaurora.org/
Fix so that it correctly calls __alloc_and_insert_iova_best_fit when
best_fit is set.
Bug: 149544392
Change-Id: I6b9992dedf4991dee088e77767e0dc077758b581
Signed-off-by: Liam Mark <lmark@codeaurora.org>
WATCHDOG was enabled, but we forgot about the watchdog core code, so
turn it on as well so that all vendors do not have to enable it in their
configs.
Reported-by: Orson Zhai <orsonzhai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iac14e304b15f774d52fb07aa65df86f3dd71797f
The UNUSED_KSYMS_WHITELIST feature as been merged in ACK as FROMLIST v5,
but the v6 got recently queued with minor changes.
Align the Android code with what will be merged upstream.
Bug: 148277666
Fixes: c5a5b70cff ("FROMLIST: kbuild: allow symbol whitelisting with
TRIM_UNUSED_KSYMS")
Signed-off-by: Quentin Perret <qperret@google.com>
Change-Id: I41726e3fba6e299bb541f93ae9ac31add0c08b60
This fixes the incorrect failure when enabling project quota on
casefold-enabled file.
Cc: Daniel Rosenberg <drosen@google.com>
Cc: kernel-team@android.com
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/linux-f2fs-devel/20200307002440.GA7944@google.com/
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Change-Id: Ib2f8db5e20aabf5a4e6e9ebbc071166e8bd3220f
This is a common config across many devices that we'd like to stablize.
Signed-off-by: Will McVicker <willmcvicker@google.com>
Bug: 150877929
Change-Id: Id56250664324ecbac2c1497ab5eb49c3306ee535
Some delays may be required either after gating or before ungating
reference clock for device according to vendor requirements.
Note that in UFS 3.0, the delay time after gating reference
clock can be defined by attribute bRefClkGatingWaitTime. Use the
formal value instead if it can be queried from device.
Bug: 151050916
(cherry picked from commit b3222c326c965f94b2e8e8ac73dc395ca82cd088)
Link: https://lore.kernel.org/r/20200220134848.8807-2-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change-Id: I4e5deff2d358ed62bd8a884eb0d186e5651582eb
Many vendors would like to disable host TX LCC during initialization
flow. Introduce a common function for all users to make drivers easier to
read and maintained. This patch does not change any functionality.
Bug: 151050916
(cherry picked from commit 984eaac133e3d6d993ffd4de9e4bdc2c94de742b)
Link: https://lore.kernel.org/r/20200207070357.17169-3-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change-Id: Ib40f9228475e74377178b41f0ffa6f46470c52e3
MediaTek UFS host requires TX LCC to be disabled on both host and device
sides. This can be done by disabling host's local TX LCC before link
startup. Correct TX LCC disabling timing in MediaTek UFS driver.
Bug: 151050916
(cherry picked from commit 618b4d07a4420ca9f01837f183ce7b1ac0b31307)
Link: https://lore.kernel.org/r/20200207070357.17169-2-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change-Id: Ic37378698fee798462142461a8a9276e8dd3d726
