Pull x86 cleanups from Ingo Molnar:
"Two cleanups in the LDT handling code, by Dan Carpenter and Thomas
Gleixner"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Make all size computations unsigned
x86/ldt: Make a size argument unsigned
hw_stats is a pointer to i40_iw_dev_stats struct in i40iw_get_hw_stats().
Use hw_stats and not &hw_stats in the memcpy to copy the i40iw device stats
data into rdma_hw_stats counters.
Fixes: b40f4757da ("IB/core: Make device counter infrastructure dynamic")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull x86 build updates from Ingo Molnar:
"The main changes in this cycle were:
- Makefile improvements (Paul Bolle)
- KConfig cleanups to better separate 32-bit only, 64-bit only and
generic feature enablement sections (Ingo Molnar)"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Remove three unneeded genhdr-y entries
x86/build: Don't use $(LINUXINCLUDE) twice
x86/kconfig: Sort the 'config X86' selects alphabetically
x86/kconfig: Clean up 32-bit compat options
x86/kconfig: Clean up IA32_EMULATION select
x86/kconfig, x86/pkeys: Move pkeys selects to X86_INTEL_MEMORY_PROTECTION_KEYS
x86/kconfig: Move 64-bit only arch Kconfig selects to 'config X86_64'
x86/kconfig: Move 32-bit only arch Kconfig selects to 'config X86_32'
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups/simplifications by Borislav Petkov, Paul Bolle and Wei
Yang"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Optimize fixmap page fixup
x86/boot: Simplify the GDTR calculation assembly code a bit
x86/boot/build: Remove always empty $(USERINCLUDE)
The macros I40IW_STAG_KEY_FROM_STAG and I40IW_STAG_INDEX_FROM_STAG are
apparently bad - they are using the logical "&&" operation which
does not make sense here. It should have been a bitwise "&" instead.
Since the macros seem to be completely unused, let's simply remove
them so that nobody accidentially uses them in the future. And while
we're at it, also remove the unused macro I40IW_CREATE_STAG.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
->get_authorizer(), ->verify_authorizer_reply(), ->sign_message() and
->check_message_signature() shouldn't be doing anything with or on the
connection (like closing it or sending messages).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
The length of the reply is protocol-dependent - for cephx it's
ceph_x_authorize_reply. Nothing sensible can be passed from the
messenger layer anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b),
the client gets back a ceph_x_authorize_reply, which it is supposed to
verify to ensure the authenticity and protect against replay attacks.
The code for doing this is there (ceph_x_verify_authorizer_reply(),
ceph_auth_verify_authorizer_reply() + plumbing), but it is never
invoked by the the messenger.
AFAICT this goes back to 2009, when ceph authentication protocols
support was added to the kernel client in 4e7a5dcd1b ("ceph:
negotiate authentication protocol; implement AUTH_NONE protocol").
The second param of ceph_connection_operations::verify_authorizer_reply
is unused all the way down. Pass 0 to facilitate backporting, and kill
it in the next commit.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
It's called during inital setup, when everything should be allocated
with GFP_KERNEL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
- replace an ad-hoc array with a struct
- rename to calc_signature() for consistency
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
It's going to be used as a temporary buffer for in-place en/decryption
with ceph_crypt() instead of on-stack buffers, so rename to enc_buf.
Ensure alignment to avoid GFP_ATOMIC allocations in the crypto stack.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Starting with 4.9, kernel stacks may be vmalloced and therefore not
guaranteed to be physically contiguous; the new CONFIG_VMAP_STACK
option is enabled by default on x86. This makes it invalid to use
on-stack buffers with the crypto scatterlist API, as sg_set_buf()
expects a logical address and won't work with vmalloced addresses.
There isn't a different (e.g. kvec-based) crypto API we could switch
net/ceph/crypto.c to and the current scatterlist.h API isn't getting
updated to accommodate this use case. Allocating a new header and
padding for each operation is a non-starter, so do the en/decryption
in-place on a single pre-assembled (header + data + padding) heap
buffer. This is explicitly supported by the crypto API:
"... the caller may provide the same scatter/gather list for the
plaintext and cipher text. After the completion of the cipher
operation, the plaintext data is replaced with the ciphertext data
in case of an encryption and vice versa for a decryption."
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Since commit 0a990e7093 ("ceph: clean up service ticket decoding"),
th->session_key isn't assigned until everything is decoded.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Pass what's going to be encrypted - that's msg_b, not ticket_blob.
ceph_x_encrypt_buflen() returns the upper bound, so this doesn't change
the maxlen calculation, but makes it a bit clearer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Starting with version 5 the following properties change:
- UBIFS_FLG_DOUBLE_HASH is mandatory
- UBIFS_FLG_ENCRYPTION is optional but depdens on UBIFS_FLG_DOUBLE_HASH
- Filesystems with unknown super block flags will be rejected, this
allows us in future to add new features without raising the UBIFS
write version.
Signed-off-by: Richard Weinberger <richard@nod.at>
This feature flag indicates that all directory entry nodes have a 32bit
cookie set and therefore UBIFS is allowed to perform lookups by hash.
Signed-off-by: Richard Weinberger <richard@nod.at>
UBIFS stores a 32bit hash of every file, for traditional lookups by name
this scheme is fine since UBIFS can first try to find the file by the
hash of the filename and upon collisions it can walk through all entries
with the same hash and do a string compare.
When filesnames are encrypted fscrypto will ask the filesystem for a
unique cookie, based on this cookie the filesystem has to be able to
locate the target file again. With 32bit hashes this is impossible
because the chance for collisions is very high. Do deal with that we
store a 32bit cookie directly in the UBIFS directory entry node such
that we get a 64bit cookie (32bit from filename hash and the dent
cookie). For a lookup by hash UBIFS finds the entry by the first 32bit
and then compares the dent cookie. If it does not match, it has to do a
linear search of the whole directory and compares all dent cookies until
the correct entry is found.
Signed-off-by: Richard Weinberger <richard@nod.at>
As of now all filenames known by UBIFS are strings with a NUL
terminator. With encrypted filenames a filename can be any binary
string and the r5 function cannot search for the NUL terminator.
UBIFS always knows how long a filename is, therefore we can change
the hash function to iterate over the filename length to work
correctly with binary strings.
Signed-off-by: Richard Weinberger <richard@nod.at>
When data of a data node is compressed and encrypted
we need to store the size of the compressed data because
before encryption we may have to add padding bytes.
For the new field we consume the last two padding bytes
in struct ubifs_data_node. Two bytes are fine because
the data length is at most 4096.
Signed-off-by: Richard Weinberger <richard@nod.at>
When we're creating a new inode in UBIFS the inode is not
yet exposed and fscrypto calls ubifs_xattr_set() without
holding the inode mutex. This is okay but ubifs_xattr_set()
has to know about this.
Signed-off-by: Richard Weinberger <richard@nod.at>
When a file is moved or linked into another directory
its current crypto policy has to be compatible with the
target policy.
Signed-off-by: Richard Weinberger <richard@nod.at>
We need ->open() for files to load the crypto key.
If the no key is present and the file is encrypted,
refuse to open.
Signed-off-by: Richard Weinberger <richard@nod.at>
We need the ->open() hook to load the crypto context
which is needed for all crypto operations within that
directory.
Signed-off-by: Richard Weinberger <richard@nod.at>
fscrypto will need this function too. Also get struct ubifs_info
from the provided inode. Not all callers will have a reference to
struct ubifs_info.
Signed-off-by: Richard Weinberger <richard@nod.at>
'ubifs_fast_find_freeable()' can not return an error pointer, so this test
can be removed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
Right now wbuf timer has hardcoded timeouts and there is no place for
manual adjustments. Some projects / cases many need that though. Few
file systems allow doing that by respecting dirty_writeback_interval
that can be set using sysctl (dirty_writeback_centisecs).
Lowering dirty_writeback_interval could be some way of dealing with user
space apps lacking proper fsyncs. This is definitely *not* a perfect
solution but we don't have ideal (user space) world. There were already
advanced discussions on this matter, mostly when ext4 was introduced and
it wasn't behaving as ext3. Anyway, the final decision was to add some
hacks to the ext4, as trying to fix whole user space or adding new API
was pointless.
We can't (and shouldn't?) just follow ext4. We can't e.g. sync on close
as this would cause too many commits and flash wearing. On the other
hand we still should allow some trade-off between -o sync and default
wbuf timeout. Respecting dirty_writeback_interval should allow some sane
cutomizations if used warily.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Values of these fields are set during init and never modified. They are
used (read) in a single function only. There isn't really any reason to
keep them in a struct. It only makes struct just a bit bigger without
any visible gain.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull x86 asm updates from Ingo Molnar:
"The main changes in this development cycle were:
- a large number of call stack dumping/printing improvements: higher
robustness, better cross-context dumping, improved output, etc.
(Josh Poimboeuf)
- vDSO getcpu() performance improvement for future Intel CPUs with
the RDPID instruction (Andy Lutomirski)
- add two new Intel AVX512 features and the CPUID support
infrastructure for it: AVX512IFMA and AVX512VBMI. (Gayatri Kammela,
He Chen)
- more copy-user unification (Borislav Petkov)
- entry code assembly macro simplifications (Alexander Kuleshov)
- vDSO C/R support improvements (Dmitry Safonov)
- misc fixes and cleanups (Borislav Petkov, Paul Bolle)"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
scripts/decode_stacktrace.sh: Fix address line detection on x86
x86/boot/64: Use defines for page size
x86/dumpstack: Make stack name tags more comprehensible
selftests/x86: Add test_vdso to test getcpu()
x86/vdso: Use RDPID in preference to LSL when available
x86/dumpstack: Handle NULL stack pointer in show_trace_log_lvl()
x86/cpufeatures: Enable new AVX512 cpu features
x86/cpuid: Provide get_scattered_cpuid_leaf()
x86/cpuid: Cleanup cpuid_regs definitions
x86/copy_user: Unify the code by removing the 64-bit asm _copy_*_user() variants
x86/unwind: Ensure stack grows down
x86/vdso: Set vDSO pointer only after success
x86/prctl/uapi: Remove #ifdef for CHECKPOINT_RESTORE
x86/unwind: Detect bad stack return address
x86/dumpstack: Warn on stack recursion
x86/unwind: Warn on bad frame pointer
x86/decoder: Use stderr if insn sanity test fails
x86/decoder: Use stdout if insn decoder test is successful
mm/page_alloc: Remove kernel address exposure in free_reserved_area()
x86/dumpstack: Remove raw stack dump
...
Sampling rate changes after first set one are not reflected to the
hardware, while driver and ALSA think the rate has been changed.
Fix the problem by properly stopping the interface at the beginning of
prepare call, allowing new rate to be set to the hardware. This keeps
the hardware in sync with the driver.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[Problem]
In some USB DACs, a terrible pop noise comes to be heard
at the start of DSD playback (in the following situations).
- play first DSD track
- change from PCM track to DSD track
- change from DSD64 track to DSD128 track (and etc...)
- seek DSD track
- Fast-Forward/Rewind DSD track
[Cause]
At the start of playback, there is a little silence.
The silence bit pattern "0x69" is required on DSD mode,
but it is not like that.
[Solution]
This patch adds DSD silence pattern to the endpoint settings.
Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
