Recently I posted commit 3c68198e75 which made selection of the cookie hmac
algorithm selectable. This is all well and good, but Linus noted that it
changes the default config:
http://marc.info/?l=linux-netdev&m=135536629004808&w=2
I've modified the sctp Kconfig file to reflect the recommended way of making
this choice, using the thermal driver example specified, and brought the
defaults back into line with the way they were prior to my origional patch
Also, on Linus' suggestion, re-adding ability to select default 'none' hmac
algorithm, so we don't needlessly bloat the kernel by forcing a non-none
default. This also led me to note that we won't honor the default none
condition properly because of how sctp_net_init is encoded. Fix that up as
well.
Tested by myself (allbeit fairly quickly). All configuration combinations seems
to work soundly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: David Miller <davem@davemloft.net>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: linux-sctp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device IDs for WiMAX function of Intel 6150 cards.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit:
04df251 can: sja1000: Make sja1000_of_platform selectable and compilable on SPARC
the driver can be activated on non powerpc platform like x86 or sparc. Without
this patch the driver fails to compile on platform that don't define NO_IRQ,
like x86.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit bd52276fa1 ("x86-64/efi: Use EFI to deal with
platform wall clock (again)"), and the two supporting commits:
da5a108d05: "x86/kernel: remove tboot 1:1 page table creation code"
185034e72d: "x86, efi: 1:1 pagetable mapping for virtual EFI calls")
as they all depend semantically on commit 53b87cf088 ("x86, mm:
Include the entire kernel memory map in trampoline_pgd") that got
reverted earlier due to the problems it caused.
This was pointed out by Yinghai Lu, and verified by me on my Macbook Air
that uses EFI.
Pointed-out-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull target updates from Nicholas Bellinger:
"It has been a very busy development cycle this time around in target
land, with the highlights including:
- Kill struct se_subsystem_dev, in favor of direct se_device usage
(hch)
- Simplify reservations code by combining SPC-3 + SCSI-2 support for
virtual backends only (hch)
- Simplify ALUA code for virtual only backends, and remove left over
abstractions (hch)
- Pass sense_reason_t as return value for I/O submission path (hch)
- Refactor MODE_SENSE emulation to allow for easier addition of new
mode pages. (roland)
- Add emulation of MODE_SELECT (roland)
- Fix bug in handling of ExpStatSN wrap-around (steve)
- Fix bug in TMR ABORT_TASK lookup in qla2xxx target (steve)
- Add WRITE_SAME w/ UNMAP=0 support for IBLOCK backends (nab)
- Convert ib_srpt to use modern target_submit_cmd caller + drop
legacy ioctx->kref usage (nab)
- Convert ib_srpt to use modern target_submit_tmr caller (nab)
- Add link_magic for fabric allow_link destination target_items for
symlinks within target_core_fabric_configfs.c code (nab)
- Allocate pointers in instead of full structs for
config_group->default_groups (sebastian)
- Fix 32-bit highmem breakage for FILEIO (sebastian)
All told, hch was able to shave off another ~1K LOC by killing the
se_subsystem_dev abstraction, along with a number of PR + ALUA
simplifications. Also, a nice patch by Roland is the refactoring of
MODE_SENSE handling, along with the addition of initial MODE_SELECT
emulation support for virtual backends.
Sebastian found a long-standing issue wrt to allocation of full
config_group instead of pointers for config_group->default_group[]
setup in a number of areas, which ends up saving memory with big
configurations. He also managed to fix another long-standing BUG wrt
to broken 32-bit highmem support within the FILEIO backend driver.
Thank you again to everyone who contributed this round!"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits)
target/iscsi_target: Add NodeACL tags for initiator group support
target/tcm_fc: fix the lockdep warning due to inconsistent lock state
sbp-target: fix error path in sbp_make_tpg()
sbp-target: use simple assignment in tgt_agent_rw_agent_state()
iscsi-target: use kstrdup() for iscsi_param
target/file: merge fd_do_readv() and fd_do_writev()
target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping
target: Add link_magic for fabric allow_link destination target_items
ib_srpt: Convert TMR path to target_submit_tmr
ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref
target: Make spc_get_write_same_sectors return sector_t
target/configfs: use kmalloc() instead of kzalloc() for default groups
target/configfs: allocate only 6 slots for dev_cg->default_groups
target/configfs: allocate pointers instead of full struct for default_groups
target: update error handling for sbc_setup_write_same()
iscsit: use GFP_ATOMIC under spin lock
iscsi_target: Remove redundant null check before kfree
target/iblock: Forward declare bio helpers
target: Clean up flow in transport_check_aborted_status()
target: Clean up logic in transport_put_cmd()
...
Fix regression, and some locking races, also as CS support
for the DMA engines.
* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
radeon: fix regression with eviction since evict caching changes
drm/radeon: add more pedantic checks in the CP DMA checker
drm/radeon: bump version for CS ioctl support for async DMA
drm/radeon: enable the async DMA rings in the CS ioctl
drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
drm/radeon: fix htile buffer size computation for command stream checker
drm/radeon: fix fence locking in the pageflip callback
drm/radeon: make indirect register access concurrency-safe
drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
The writeback code is already capable of passing errors back to user space
by means of the open_context->error. In the case of ENOSPC, Neil Brown
is reporting seeing 2 errors being returned.
Neil writes:
"e.g. if /mnt2/ if an nfs mounted filesystem that has no space then
strace dd if=/dev/zero conv=fsync >> /mnt2/afile count=1
reported Input/output error and the relevant parts of the strace output are:
write(1, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
fsync(1) = -1 EIO (Input/output error)
close(1) = -1 ENOSPC (No space left on device)"
Neil then shows that the duplication of error messages appears to be due to
the use of the PageError() mechanism, which causes filemap_fdatawait_range
to return the extra EIO. The regression was introduced by
commit 7b281ee026 (NFS: fsync() must exit
with an error if page writeback failed).
Fix this by removing the call to SetPageError(), and just relying on
open_context->error reporting the ENOSPC back to fsync().
Reported-by: Neil Brown <neilb@suse.de>
Tested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org [3.6+]
Here are some drivers/extcon/ patches that I forgot to have you pull in
the larger char/misc patchset from yesterday, for the 3.8-rc1 kernel.
Nothing major here, just some driver updates, and cleanups, all of which
have been in linux-next for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlDJGnYACgkQMUfUDdst+ykxBgCaAgowyu5iGOIlDf5+F8KL8fsm
T3gAoKt+g3zaN3A3zfPLMr6zeKlUNF+T
=xiFu
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull EXTCON patches from Greg Kroah-Hartman:
"Here are some drivers/extcon/ patches that I forgot to have you pull
in the larger char/misc patchset from yesterday, for the 3.8-rc1
kernel.
Nothing major here, just some driver updates, and cleanups, all of
which have been in linux-next for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'char-misc-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
extcon: kernel_doc style fix
extcon: max77693: Fix uninitialised variable warning
extcon: max77693: Use devm_kzalloc
extcon: max8997: Use devm_kzalloc
extcon: max8997: Fix a typo
extcon: max8997: Fix checkpatch error
extcon: max77693: Fix coding style
extcon: max77693: Fix incorrect error check and return value
extcon: max8997: Fix incorrect error check and return value
extcon: Fix return value in extcon-class.c
extcon: Add missing header file to extcon.h
extcon: arizona: unlock mutex on error path in arizona_micdet()
Silence the unnecessary warning "unhandled error (111) connecting to..."
and convert it to a dprintk for debugging purposes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
OMAPDSS changes, including:
- use dynanic debug prints
- OMAP platform dependency removals
- Creation of compat-layer, helping us to improve omapdrm
- Misc cleanups, aiming to make omadss more in line with the upcoming common
display framework
Exynos DP changes for the 3.8 merge window:
- Device Tree support for Samsung Exynos DP
- SW Link training is cleaned up.
- HPD interrupt is supported.
Samsung Framebuffer changes for the 3.8 merge window:
- The bit definitions of header file are updated.
- Some minor typos are fixed.
- Some minor bugs of s3c_fb_check_var() are fixed.
FB related changes for SH Mobile, Freescale DIU
Add support for the Solomon SSD1307 OLED Controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=KVPX
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux
Pull fbdev changes from Tomi Valkeinen:
"OMAPDSS changes, including:
- use dynanic debug prints
- OMAP platform dependency removals
- Creation of compat-layer, helping us to improve omapdrm
- Misc cleanups, aiming to make omadss more in line with the upcoming
common display framework
Exynos DP changes for the 3.8 merge window:
- Device Tree support for Samsung Exynos DP
- SW Link training is cleaned up.
- HPD interrupt is supported.
Samsung Framebuffer changes for the 3.8 merge window:
- The bit definitions of header file are updated.
- Some minor typos are fixed.
- Some minor bugs of s3c_fb_check_var() are fixed.
FB related changes for SH Mobile, Freescale DIU
Add support for the Solomon SSD1307 OLED Controller"
* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
OMAPDSS: fix TV-out issue with DSI PLL
Revert "OMAPFB: simplify locking"
OMAPFB: remove silly loop in fb2display()
OMAPFB: fix error handling in omapfb_find_best_mode()
OMAPFB: use devm_kzalloc to allocate omapfb2_device
OMAPDSS: DISPC: remove dispc fck uses
OMAPDSS: DISPC: get dss clock rate from dss driver
drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
drivers/video: add support for the Solomon SSD1307 OLED Controller
OMAPDSS: use omapdss_compat_init() in other drivers
OMAPDSS: export dispc functions
OMAPDSS: export dss_feat functions
OMAPDSS: export dss_mgr_ops functions
OMAPDSS: separate compat files in the Makefile
OMAPDSS: move display sysfs init to compat layer
OMAPDSS: DPI: use dispc's check_timings
OMAPDSS: DISPC: add dispc_ovl_check()
OMAPDSS: move irq handling to dispc-compat
OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
OMAPDSS: move blocking mgr enable/disable to compat layer
...
Conflicts:
arch/arm/mach-davinci/devices-da8xx.c
arch/arm/plat-omap/common.c
drivers/media/platform/omap/omap_vout.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=0rWI
-----END PGP SIGNATURE-----
Merge tag 'for-v3.8' of git://git.infradead.org/users/cbou/linux-pstore
Pull pstore update from Anton Vorontsov:
"Here are just a few fixups for the pstore subsystem, nothing special
this time"
* tag 'for-v3.8' of git://git.infradead.org/users/cbou/linux-pstore:
pstore/ftrace: Adjust for ftrace_ops->func prototype change
pstore/ram: Fix bounds checks for mem_size, record_size, console_size and ftrace_size
pstore/ram: Fix undefined usage of rounddown_pow_of_two(0)
pstore/ram: Fixup section annotations
If an RPC call is interrupted, assume that the server hasn't processed
the RPC call so that the next time we use the slot, we know that if we
get a NFS4ERR_SEQ_MISORDERED or NFS4ERR_SEQ_FALSE_RETRY, we just have
to bump the sequence number.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pull microblaze update from Michal Simek:
"The main change is UAPI for Microblaze."
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: signal: Declare do_notify_resume
microblaze: lib: Add lib function declarations
microblaze: lib: Remove helper macros
microblaze: Add static qualifiers
microblaze: Wire-up new system call kcmp
microblaze: Fix intc_enable_or_unmask function
microblaze: Do not initialized regs->r1 twice in ELF_PLAT_INIT
microblaze: Remove passing the second arg to schedule_tail
UAPI: (Scripted) Disintegrate arch/microblaze/include/asm
microblaze: uaccess.h: Fix timerfd syscall
microblaze: Remove BIP from childregs
Pull GFS2 updates from Steven Whitehouse:
"The main feature this time is the new Orlov allocator and the patches
leading up to it which allow us to allocate new inodes from their own
allocation context, rather than borrowing that of their parent
directory. It is this change which then allows us to choose a
different location for subdirectories when required. This works
exactly as per the ext3 implementation from the users point of view.
In addition to that, we've got a speed up in gfs2_rbm_from_block()
from Bob Peterson, three locking related improvements from Dave
Teigland plus a selection of smaller bug fixes and clean ups."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Set gl_object during inode create
GFS2: add error check while allocating new inodes
GFS2: don't reference inode's glock during block allocation trace
GFS2: remove redundant lvb pointer
GFS2: only use lvb on glocks that need it
GFS2: skip dlm_unlock calls in unmount
GFS2: Fix one RG corner case
GFS2: Eliminate redundant buffer_head manipulation in gfs2_unlink_inode
GFS2: Use dirty_inode in gfs2_dir_add
GFS2: Fix truncation of journaled data files
GFS2: Add Orlov allocator
GFS2: Use proper allocation context for new inodes
GFS2: Add test for resource group congestion status
GFS2: Rename glops go_xmote_th to go_sync
GFS2: Speed up gfs2_rbm_from_block
GFS2: Review bug traps in glops.c
This reverts commit 53b87cf088.
It causes odd bootup problems on x86-64. Markus Trippelsdorf gets a
repeatable oops, and I see a non-repeatable oops (or constant stream of
messages that scroll off too quickly to read) that seems to go away with
this commit reverted.
So we don't know exactly what is wrong with the commit, but it's
definitely problematic, and worth reverting sooner rather than later.
Bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: H Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shave a few bytes off the slot table size by moving the RPC timestamp
into the sequence results.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server returns NFS4ERR_SEQ_MISORDERED, it could be a sign
that the slot was retired at some point. Retry the attempt after
reinitialising the slot sequence number to 1.
Also add a handler for NFS4ERR_SEQ_FALSE_RETRY. Just bump the slot
sequence number and retry...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the value of status to disabled to keep the consistent
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
pop_wait is used to determine if a deferred playback close
needs to be cancelled when the a PCM is open or if after
the power-down delay expires it needs to run. pop_wait is
associated with the CODEC DAI, so the CODEC DAI must be
unique. This holds true for most CODECs, except for the
dummy CODEC and its DAI.
In DAI links with non-unique dummy CODECs (e.g. front-ends),
pop_wait can be overwritten by another DAI link using also a
dummy CODEC. Failure to cancel a deferred close can cause
mute due to the DAPM STOP event sent in the deferred work.
One scenario where pop_wait is overwritten and causing mute
is below (where hw:0,0 and hw:0,1 are two front-ends with
default pmdown_time = 5 secs):
aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE -d 1
sleep 1
aplay /dev/urandom -D hw:0,1 -c 2 -r 48000 -f S16_LE -d 3 &
aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE
Since CODECs may not be unique, pop_wait is moved to the PCM
runtime structure. Creating separate dummy CODECs for each
DAI link can also solve the problem, but at this point it's
only pop_wait variable in the CODEC DAI that has negative
effects by not being unique.
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
As Joe Cooper <swelljoe@gmail.com> reported, "On most HP Envy laptops
the snd-usb-audio module causes the system to become unresponsive and
Gnome Shell 3 to crash.".
See also:
http://mailman.alsa-project.org/pipermail/alsa-devel/2012-December/057729.html
Add a quirk to ignore this device (for now) to solve the instability
issue and allow other USB audio devices to be used.
Reported-by: Joe Cooper <swelljoe@gmail.com>
Tested-by: Isaac Smith <hunternet93@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following sparse warnings in the OMAP3/4 CPUIdle code:
arch/arm/mach-omap2/cpuidle34xx.c:272:1: warning: symbol 'omap3_idle_dev' was not declared. Should it be static?
arch/arm/mach-omap2/cpuidle34xx.c:274:23: warning: symbol 'omap3_idle_driver' was not declared. Should it be static?
arch/arm/mach-omap2/cpuidle44xx.c:164:1: warning: symbol 'omap4_idle_dev' was not declared. Should it be static?
arch/arm/mach-omap2/cpuidle44xx.c:166:23: warning: symbol 'omap4_idle_driver' was not declared. Should it be static?
Also fix the following checkpatch warnings:
WARNING: please, no space before tabs
#44: FILE: arch/arm/mach-omap2/cpuidle34xx.c:105:
+^I.name = ^I"omap3_idle",$
WARNING: please, no space before tabs
#45: FILE: arch/arm/mach-omap2/cpuidle34xx.c:106:
+^I.owner = ^ITHIS_MODULE,$
ERROR: code indent should use tabs where possible
#211: FILE: arch/arm/mach-omap2/cpuidle44xx.c:74:
+ /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */$
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Booting OMAP4460 Pandaboard ES with a recent u-boot results in this
warning:
WARNING: at arch/arm/mach-omap2/dpll3xxx.c:427 omap3_noncore_dpll_enable+0xf4/0x110()
The OMAP4 DPLL parent clock names only listed the reference clocks,
not the bypass clocks. Fix by adding the bypass clocks to the DPLL
parent lists.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@linaro.org>
The OMAP4 clock divider "div_iva_hs_clk" is listed in the clock data
as an OMAP HSDIVIDER, but it's actually a power-of-two divider. This
causes a warning during boot on an OMAP4460 Pandaboard-ES with a
recent u-boot:
WARNING: at arch/arm/mach-omap2/clkt_clksel.c:143 omap2_clksel_recalc+0xf4/0x12c()
clock: div_iva_hs_clk: could not find fieldval 0 for parent dpll_core_m5x2_ck
Fix by converting the data for this clock to a power-of-two divider.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@linaro.org>
Commit d043d87 (ARM: OMAP2+: clockdomain: bypass clockdomain handling
when disabling unused clks) skips the decrementing of a clock-domains
use count if the clocks use count is zero. However, for OMAP4 devices
this is causing the EMU clock-domain to be stuck ON as the use count is
not getting decremented correctly.
The scenario that leads to this problem is described below ...
omap_hwmod_setup_all
--> _setup
--> clkdm_hwmod_enable
--> EMU clock domain usecount = 1
--> _enable_clocks
--> clk_enable
--> trace_clk_div_div usecount = 1
--> clkdm_hwmod_enable
--> EMU clock domain usecount = 2
--> _idle
--> _disable_clocks
--> clk_disable
--> trace_clk_div_div usecount = 0
--> clkdm_hwmod_disable
--> skips decrement of EMU clock domain usecount
because trace_clk_div_div is 0!
--> EMU clock domain usecount = 2
--> clkdm_hwmod_disable
--> EMU clock domain usecount = 1
Hence, due to the order that a clocks use count is decremented and the
clock domain is disabled, it is possible that the clock domain can have
a non-zero use count when the actual clock has a use count of 0.
Therefore, we should only bypass the clock-domain handling when both the
clock-domain and clock in the clock-domain have a use count of 0 and
warn when the clock-domain has a zero use count and the clock has a
non-zero use count.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: fixed checkpatch warning]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
With the latest mainline u-boot bootloader (v2012.10), timers (5-8) in
the ABE power domain are failing to turn-on. The timers never come out
of the disabled state when setting the module-mode field to enable.
The problem was exposed when u-boot was updated to NOT configure and
lock the ABE DPLL on start-up. If the ABE DPLL is configured and locked
by u-boot the problem does not occur. However, if the ABE DPLL is in the
idle low-power bypass state and we attempt to enable a timer in the ABE
power domain, it remains stuck in the disabled state. It appears to be a
problem the timer interface clock as this comes from the ABE DPLL.
If we place the ABE DPLL in the MN-bypass state and not the idle
low-power state, then this problem is not seen.
This problem only appears to occur on OMAP4460 and not OMAP4430.
Workaround this problem by locking the ABE DPLL for OMAP4460 in the
kernel on boot. By locking the ABE DPLL, when clocks from the ABE DPLL
are not being requested the DPLL will transition into a low-power stop
mode.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
On OMAP4 devices, the ABE DPLL has an internal 4X multiplier that can
be enabled or disabled in addition to the standard configurable
multiplier (M) for OMAP DPLLs. When configuring the ABE DPLL the 4X
multiplier is accounted for by checking to see whether it is enabled or
not. However, when calculating a new rate we only check to see if the
rate can be achieved with the current setting for the 4X multiplier.
Enhance the round_rate() function for such DPLLs to see if the rate
can be achieved with the 4X multiplier if it cannot be achieved without
the 4X multiplier.
This change is necessary, because when using the 32kHz clock as the
source clock for the ABE DPLL, the default DPLL frequency for the ABE
DPLL cannot be achieved without enabling the 4X multiplier.
When using the 32kHz clock as the source clock for the ABE DPLL and
attempting to lock the DPLL to 98.304MHz (default frequency), it was
found that the DPLL would fail to lock if the low-power mode for the DPLL
was not enabled. From reviewing boot-loader settings that configure the
ABE DPLL it was found that the low-power mode is enabled when using the
32kHz clock source, however, the documentation for OMAP does not state
that this is a requirement. Therefore, introduce a new function for
OMAP4 devices to see if low-power mode can be enabled when calculating a
new rate to ensure the DPLL will lock.
New variables for the last calculated 4X multiplier and low-power
setting have been added to the dpll data structure as well as variables
defining the bit mask for enabling these features via the DPLL's
control_reg. It is possible that we could eliminate these bit masks from
the dpll data structure as these bit masks are not unique to OMAP4, if
it is preferred.
The function omap3_noncore_program_dpll() has been updated to avoid
passing the calculated values for the multiplier (M) and divider (N) as
these are stored in the clk structure.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Currently all OMAP4 non-core DPLLs use the same function table for
configuring DPLLs. For these DPLLs, the function
omap4_dpll_regm4xen_recalc() is used to recalculate the DPLL rate and
the function omap4_dpll_regm4xen_round_rate() is used to calculate the
closest rate to that requested. However, these omap4_dpll_regm4xen_xxx()
functions are only applicable to the ABE DPLL and not the other non-core
DPLLs. Therefore, add a new function table for non-core DPLLs that do
not include the 4X-multiplier (M4X).
Please note that using these omap4_dpll_regm4x_xxx() function works for
the non-M4X DPLLs today because we only check to see if the 4X
multiplier is enabled when calculating the rate. However, it is planned
that the dpll functions will be enhanced to enable the 4X multiplier as
necessary (in order to achieve the requested rate) and so calling these
functions for non-M4X dplls will no longer work.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
names of the OMAP4 timers 5-7 because the default address for the timers
was changed from the L3 address to the MPU private address. When booting
with device-tree, this introduces a regression when attempting to set
the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
the clock aliases for timer 5-7 to reflect the updated device-tree name
for the timers.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: updated to apply after the CCF conversion]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
When unsharing a user namespace we reduce our credentials to just what
can be done in that user namespace. This is a subset of the credentials
we previously had. Teach commit_creds to recognize this is a subset
of the credentials we have had before and don't clear the dumpability flag.
This allows an unprivileged program to do:
unshare(CLONE_NEWUSER);
fd = open("/proc/self/uid_map", O_RDWR);
Where previously opening the uid_map writable would fail because
the the task had been made non-dumpable.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
To get modprobe to automatically load the proper modules, we need to
prefix things with "spi:". Partially based on Grant Likely's suggestions.
Signed-off-by: David Daney <david.daney@cavium.com>
[grant.likely: reworked because drivers/of/of_spi.c has been removed]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Setting SW_RST does TX/RX FIFO flush.
After FIFO flush, SW_RST should be cleared.
The above setting and clearing SW_RST operation should be done after spi channel off.
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
During all transfers in one message, the device will not be chagned.
So we don't need to deassert chipselect during one message.
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Andy Lutomirski <luto@amacapital.net> found a nasty little bug in
the permissions of setns. With unprivileged user namespaces it
became possible to create new namespaces without privilege.
However the setns calls were relaxed to only require CAP_SYS_ADMIN in
the user nameapce of the targed namespace.
Which made the following nasty sequence possible.
pid = clone(CLONE_NEWUSER | CLONE_NEWNS);
if (pid == 0) { /* child */
system("mount --bind /home/me/passwd /etc/passwd");
}
else if (pid != 0) { /* parent */
char path[PATH_MAX];
snprintf(path, sizeof(path), "/proc/%u/ns/mnt");
fd = open(path, O_RDONLY);
setns(fd, 0);
system("su -");
}
Prevent this possibility by requiring CAP_SYS_ADMIN
in the current user namespace when joing all but the user namespace.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIVAwUAUMu5DROxKuMESys7AQJbxxAAi6y7i5qoezS4sIw6GZ7JbLlFHAcJ9ivH
Nerr1vYLMFpXC1b+joUhLuNu+QhRP5apLGZ+3HgpCEgTF274j1NDmSS3iWyFz0uC
tYOa7c6En2oqnKgLOfLEWUNNKxqs/e4qf8g0yd2YJkEA6pgP1t9aoj5KAGNjifov
QBPQ+1R8aVypTXgJkYGd/BwfqItdLgT9AIT4zXd0VJpQXhkXPnRXTVfK/UiZVAfQ
unzHws2c3+P7XvdfZGww+nvUmEHq4dkRchh6M+aiRyl9T3FtvNgOkcXSJWnKUb//
A4G6tjDLR7YBjfp4+Je65qG+lgA+0q3BkH0BtTAsjkTt23f5qxvxf8ZXV3gSyvWw
Ix44fD/n7fTlQGmwsc4TjV1bft32VwLtXyNO//6Smpv+CasKGchJ8XtzE5Sv2Yrs
fp+0TN98cQdL8mxBGawmLJIO71nHBbabpsK33bYc2Wh0IJjF+qHilyy1StzBXV6h
Ku/RpoY69ytaFTHvjNmD5mtsZ58mg+HI3XoudD3OybIpRYas7ffxssYB27UFeL7a
aFyytDl+UrKx++2hWlTpRWRNheoehRiskVfipJSq45gth7Ue10EtaTTltVBa7DsU
IvRbKJ/dHV9QFPHlg6343qeGYEMQWEpvwQut7rIL77JexHDJoK+17PJPjLyZ5Hpe
7BcU1zMPCPA=
=54+i
-----END PGP SIGNATURE-----
Merge tag 'disintegrate-x86-20121214' of git://git.infradead.org/users/dhowells/linux-headers
Pull x86 UAPI disintegration from David Howells.
This is the scripted disintegration of the uapi headers for x86, now
that most of the x86 updates for 3.8 are hopefully merged.
* tag 'disintegrate-x86-20121214' of git://git.infradead.org/users/dhowells/linux-headers:
UAPI: (Scripted) Disintegrate arch/x86/include/asm
constification of node argument to of_parse_phandle_with_args().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Zs/W
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull another devicetree update from Grant Likely:
"Here's a couple more devicetree changes that I missed in the first
pull by putting the tag in the wrong place.
Two minor devicetree fixups for v3.8. Addition of dummy inlines and
constification of node argument to of_parse_phandle_with_args()."
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
of: *node argument to of_parse_phandle_with_args should be const
of/i2c: add dummy inline functions for when CONFIG_OF_I2C(_MODULE) isn't defined
This is a branch with updates for Marvell's mvebu/kirkwood platforms. They
came in late-ish, and were heavily interdependent such that it didn't
make sense to split them up across the cross-platform topic branches. So
here they are (for the second release in a row) in a branch on their own.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=7luC
-----END PGP SIGNATURE-----
Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson:
"This is a branch with updates for Marvell's mvebu/kirkwood platforms.
They came in late-ish, and were heavily interdependent such that it
didn't make sense to split them up across the cross-platform topic
branches. So here they are (for the second release in a row) in a
branch on their own."
* tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits)
arm: l2x0: add aurora related properties to OF binding
arm: mvebu: add Aurora L2 Cache Controller to the DT
arm: mvebu: add L2 cache support
dma: mv_xor: fix error handling path
dma: mv_xor: fix error checking of irq_of_parse_and_map()
dma: mv_xor: use request_irq() instead of devm_request_irq()
dma: mv_xor: clear the window override control registers
arm: mvebu: fix address decoding armada_cfg_base() function
ARM: mvebu: update defconfig with I2C and RTC support
ARM: mvebu: Add SATA support for OpenBlocks AX3-4
ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
ARM: mvebu: Add support for I2C controllers in Armada 370/XP
arm: mvebu: Add hardware I/O Coherency support
arm: plat-orion: Add coherency attribute when setup mbus target
arm: dma mapping: Export a dma ops function arm_dma_set_mask
arm: mvebu: Add SMP support for Armada XP
arm: mm: Add support for PJ4B cpu and init routines
arm: mvebu: Add IPI support via doorbells
arm: mvebu: Add initial support for power managmement service unit
...
We need to move this file to allow ARM multiplatform configurations
to build for omap2+. This can now be done as this file now only
contains platform_data.
cc: Russell King <linux@arm.linux.org.uk>
cc: Alan Cox <alan@linux.intel.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Govindraj.R <govindraj.raja@ti.com>
cc: Kevin Hilman <khilman@ti.com>
cc: linux-serial@vger.kernel.org
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 0d9250c (ARM: dts: omap4-panda: Add pinmux configuration for
HDMI) added a new device-tree source file for Rev A4 of the OMAP4430
Panda board but it did not add this version to the makefile. Hence,
add this file to the makefile.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
