Check the value ranges in ctl put callbacks properly (in the rest drivers).
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly in aoa drivers.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly in ak4xxx-adda driver.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly in snd-powermac
driver.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks in vxpocket driver.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Clean up ctl callbacks of SE-200PCI driver. Also make sure to check
the value ranges.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly in the rest of
PCI drivers.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly.
Also fixed some coding style issues around that.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly.
Also fixed the wrong access type to enum elements in aureon.c.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check the value ranges in ctl put callbacks properly so that
invalid values won't be stored or written to registers.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Check value ranges in ctl callbacks properly. This fixes the unexpected
crash due to wrong value assignment.
Also, remove invalid comments in the last patch.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch adds ALSA SoC support for TI TLV320AIC3X audio codecs.
The features that are supported:
o Capture/Playback/Bypass.
o 16/20/24/32 bit audio.
o 8k - 96k sample rates.
o codec master only mode
o DAPM.
Signed-off-by: Vladimir Barinov <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Continue is not needed at the bottom of a loop.
The semantic patch implementing this change is as follows:
@@
@@
for (...;...;...) {
...
if (...) {
...
- continue;
}
}
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added the missing model string for the new support of HP TC T5735.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added the support of HP Thin Client T5735 [0x103c 0x302f] with ALC262 codec.
Signed-off-by: Kailang Yang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
When a mic jack is set up as the multiple I/O, it may issue the automute
function wrongly. This patch fixes the wrong automute detection.
Signed-off-by: Jiang Zhe <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Dell laptops have multiple HP jacks that can be used for multi-channel
outputs. The current auto pincfg handles the speaker as the primary
output and thus cannot handle the multi-channel configuration for such
cases. This patch adds a workaround to fix this issue by swapping the
HP and speaker during multi-channel setup routines.
Signed-off-by: Jiang Zhe <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Updated dell-m82 model pin config table. The old config doesn't work
with Dell 1210 and co.
Signed-off-by: Jiang Zhe <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Remove duplicated defines.
(From their use it looks like 'midiDataOutx are written to
rather than read from.)
Signed-off-by: Nicolas Kaiser <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Updated the forgotten SNDRV_HWDEP_IFACE_LAST to point the really last member.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added more laptops subsystem id's that have STAC9228 DMIC support.
Signed-off-by: Matthew Ranostay <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Enable capturing of raw 32bit IEC958_SUBFRAME.
The 24-bits PCM data can be obtained using iec958 plugin.
Known problem: captured stream may begin with either left or right
subframe. Since the iec958 plugin doesn't decode preamble it may swap
the channels sometime.
Signed-off-by: Timofei Bondarenko <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Setting the ADC48K44K greatly improves capture quality at 48k sampling rate.
With this bit clear ADC does ZOH interpolation of every 22th sample at 48k.
At frequencies higher than 48k there ADC performs a little better with
ADC48K44K bit set.
At 44.1k ADC performs a little better with this bit clear.
At frequencies below 44.1k there is no difference.
Signed-off-by: Timofei Bondarenko <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added new PCI SSIDs for HP machines with ALC262 codec.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added analog loopback support and missing ADC capture mixer for the
STAC92HD71 codec family.
Signed-off-by: Matthew Ranostay <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Change loops in ac97_read/write functions to count down to zero
rather than up. Gcc will then use the 'dt' (decrement-and-test) op
instead of an increment/compare op-pair.
Signed-off-by: Manuel Lauss <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added initial support for the STAC92HD71BXX family of codecs.
Signed-off-by: Matthew Ranostay <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
The Audio interface on HD2400/HD2600 cards isn't currently detected by
snd-hda-intel. I added missing pci device ids for RV610 and RV630, but
I only had a HD2400 pro card to test, where now the audio interface is
detected (and no need to change patch_atihdmi.c, as the codec vendor id
remains 0x1002aa01 for which we already have an entry there). I also
couldn't test if sound pass-trough is ok (and I don't know how to), but
at least now the device is detected.
Signed-off-by: Herton Ronaldo Krzesinski <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
We have to do fairly accurate counting of the minimal periods, instead
of being lazy and just setting the number to zero as soon as one period
elapses.
Signed-off-by: Joachim Foerster <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Add ALSA support for the opb_ac97_controller_ref_v1_00_a ip core found
in Xilinx' ML403 reference design.
Known issue: Currently this driver hits a WARN_ON_ONCE(1) statement in
kernel/irq/resend.c (line 70). According to Linus
(http://lkml.org/lkml/2007/8/5/5) this may be ignored, right? I haven't
had a look into this 'problem' yet.
Signed-off-by: Joachim Foerster <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Added support for the dmics and enabled EAPD for several laptops with
STAC9228 cards.
Signed-off-by: Matthew Ranostay <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list.
Signed-off-by: Tobin Davis <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch adds support for 88.2k, 96k, and 128k samplerates
on cmi8738-55 chip.
Analog playback works fine on all channels.
Analog capture works well too, though the extra samples seems
interpolated by hardware.
spdif playback and capture works fine.
Signed-off-by: Timofei Bondarenko <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Some small improvements on autocfg stuff:
- sort HP pins by sequence number, too
- move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC
- ditto for line-in pin
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch improves support for 'SB Live 24-bit Extarnal' USB card.
1) This card can go into muted state when a headphones connected or
disconnected. So notify mixer about changes in headphone jack.
2) Add LED controls and procfs support just as in similar Audigy 2 NX card.
3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality:
the card may adjust microphone input level only.
Signed-off-by: Timofei Bondarenko <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Remove sequencer instrument layer from the tree.
This mechanism hasn't been used much with the actual devices. The only
reasonable user was OPL3 loader, and now it was rewritten to use hwdep
instead. So, let's remove the rest of rotten codes.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Use the exclusive access lock in hwdep instead of the own one.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Use the hwdep device for loading OPL2/3 patch data instead of the
messy sequencer instrument layer.
Due to this change, the sbiload program should be updated, too.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch supresses an annoying compiler warning that the variable
err may be used uninitialised.
Signed-off by: Adrian McMenamin <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch kills these two compilation warnings if
power management is disabled:
sound/pci/ac97/ac97_patch.h:86: warning: 'snd_ac97_restore_status'
declared 'static' but never defined
sound/pci/ac97/ac97_patch.h:87: warning: 'snd_ac97_restore_iec958'
declared 'static' but never defined
Signed-off-by: Krzysztof Helt <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Introduced the global 'slots' option to snd module. This option provides
an alternative way to handle the order of multiple sound card instances.
It's an easier approach to avoid conflict with hotplug devices, and can
be used together with the existing 'order' option of each card driver.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Show the current EAPD status and volume-knob status in proc file.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch adds ac97 support for ln2440sbc board from LittleChips.
This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec.
Existing s3c2443 implementation is slightly modified because s3c2440
and s3c2443 have different AC97 interrupts.
Signed-off-by: Ivan Kuten <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
This patch adds full record and playback support for the Samsung Q1
Ultra - Vista model (different codec than the earlier Q1 Ultra models).
Signed-off-by: Tobin Davis <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Fix quirk for Shuttle AK32VN. It works better with DXS_SRC, and needs
HP_ONLY ac97 quirk.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
