On a system with two security states, if SCR_EL3.FIQ is cleared,
non-secure IRQ priorities get shifted to fit the secure view but
priority masks aren't.
On such system, it turns out that GIC_PRIO_IRQON masks the priority of
normal interrupts, which obviously ends up in a hang.
Increase GIC_PRIO_IRQON value (i.e. lower priority) to make sure
interrupts are not blocked by it.
Cc: Oleg Nesterov <oleg@redhat.com>
Fixes: bd82d4bd21 ("arm64: Fix incorrect irqflag restore for priority masking")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[will: fixed Fixes: tag]
Signed-off-by: Will Deacon <will@kernel.org>
- sdhci-sprd: Add a missing pm_runtime_put_noidle() to fix deferred probe
- dw_mmc: Fix occasional hang after tuning on eMMC
- meson-mx-sdio: Fix misuse of GENMASK macro
- mmc_spi: Fix CRC problems for writes by using BDI_CAP_STABLE_WRITES
-----BEGIN PGP SIGNATURE-----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=arat
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-sprd: Add a missing pm_runtime_put_noidle() to fix deferred
probe
- dw_mmc: Fix occasional hang after tuning on eMMC
- meson-mx-sdio: Fix misuse of GENMASK macro
- mmc_spi: Fix CRC problems for writes by using BDI_CAP_STABLE_WRITES
* tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmc_spi: Enable stable writes
mmc: meson-mx-sdio: Fix misuse of GENMASK macro
mmc: dw_mmc: Fix occasional hang after tuning on eMMC
mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()
- Fix the request of active low GPIO line events.
- Don't issue WARN() stuff on NULL descriptors if
the GPIOLIB is disabled.
- Preserve the descriptor flags when setting the
initial direction on lines.
-----BEGIN PGP SIGNATURE-----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=2Uyx
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Three GPIO fixes, all touching the core, so quite important:
- Fix the request of active low GPIO line events.
- Don't issue WARN() stuff on NULL descriptors if the GPIOLIB is
disabled.
- Preserve the descriptor flags when setting the initial direction on
lines"
* tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: Preserve desc->flags when setting state
gpio: don't WARN() on NULL descs if gpiolib is disabled
gpiolib: fix incorrect IRQ requesting of an active-low lineevent
The local variable search in regulator_of_get_init_node takes the value
returned by either of_get_child_by_name or of_node_get, both of which
get a node. If this node is not put before returning, it could cause a
memory leak. Hence put search before a mid-loop return statement.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190724083231.10276-1-nishkadg.linux@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bochs driver (and virtual hardware) requires buffer objects to
reside in video ram to display them to the screen. So it can not
display the framebuffer console because the respective buffer object
is permanently pinned in system memory.
Using a shadow buffer for the console solves this problem. The console
emulation will pin the buffer object only during updates from the shadow
buffer. Otherwise, the bochs driver can freely relocated the buffer
between system memory and video ram.
v2:
* select shadow FB via struct drm_mode_config.prefer_shadow_fbdev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315833/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes DRM clients to not map the buffer by default. The
buffer, like any buffer object, should be mapped and unmapped when
needed.
An unmapped buffer object can be evicted to system memory and does
not consume video ram until displayed. This allows to use generic fbdev
emulation with drivers for low-memory devices, such as ast and mgag200.
This change affects the generic framebuffer console. HW-based consoles
map their console buffer once and keep it mapped. Userspace can mmap this
buffer into its address space. The shadow-buffered framebuffer console
only needs the buffer object to be mapped during updates. While not being
updated from the shadow buffer, the buffer object can remain unmapped.
Userspace will always mmap the shadow buffer.
v2:
* change DRM client to not map buffer by default
* manually map client buffer for fbdev with HW framebuffer
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315830/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DRM clients, such as the fbdev emulation, have their buffer objects
mapped by default. Mapping a buffer implicitly prevents its relocation.
Hence, the buffer may permanently consume video memory while it's
allocated. This is a problem for drivers of low-memory devices, such as
ast, mgag200 or older framebuffer hardware, which will then not have
enough memory to display other content (e.g., X11).
This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal
DRM clients can use these functions to unmap and remap buffer objects
as needed.
There's no reference counting for vmap operations. Callers are expected
to either keep buffers mapped (as it is now), or call vmap and vunmap
in pairs around code that accesses the mapped memory.
v2:
* remove several duplicated NULL-pointer checks
v3:
* style and typo fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315831/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use SMBUS_MASTER_DATA_READ.MASTER_RD_STATUS bit to check for RX
FIFO empty condition because SMBUS_MASTER_FIFO_CONTROL.MASTER_RX_PKT_COUNT
is not updated for read >= 64 bytes. This fixes the issue when trying to
read from the I2C slave more than 63 bytes.
Fixes: c24b8d574b ("i2c: iproc: Extend I2C read up to 255 bytes")
Cc: stable@kernel.org
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Apparently we don't have an archclean target in our
arch/parisc/Makefile, so files in there never get cleaned out by make
mrproper. This, in turn means that the sizes.h file in
arch/parisc/boot/compressed never gets removed and worse, when you
transition to an O=build/parisc[64] build model it overrides the
generated file. The upshot being my bzImage was building with a SZ_end
that was too small.
I fixed it by making mrproper clean everything.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
Same as on x86-64, strip the .comment, .note and debug sections from the
Linux kernel before creating the compressed image for the boot loader.
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
- make spd eeproms world-readable again
-----BEGIN PGP SIGNATURE-----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=Olm4
-----END PGP SIGNATURE-----
Merge tag 'at24-v5.3-rc3-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.3-rc3
- make spd eeproms world-readable again
If we issue a reset to a currently idle engine, leave it idle
afterwards. This is useful to excise a linkage between reset and the
shrinker. When waking the engine, we need to pin the default context
image which we use for overwriting a guilty context -- if the engine is
idle we do not need this pinned image! However, this pinning means that
waking the engine acquires the FS_RECLAIM, and so may trigger the
shrinker. The shrinker itself may need to wait upon the GPU to unbind
and object and so may require services of reset; ergo we should avoid
the engine wake up path.
The danger in skipping the recovery for idle engines is that we leave the
engine with no context defined, which may interfere with the operation of
the power context on some older platforms. In practice, we should only
be resetting an active GPU but it something to look out for on Ironlake
(if memory serves).
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk
(cherry picked from commit 18398904ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For use in the next patch, we want to acquire a wakeref without having
to wake the device up -- i.e. only acquire the engine wakeref if the
engine is already active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk
(cherry picked from commit de5147b8ce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk
(cherry picked from commit 092be382a2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Instead of always calling xen_destroy_contiguous_region() in case the
memory is DMA-able for the used device, do so only in case it has been
made DMA-able via xen_create_contiguous_region() before.
This will avoid a lot of xen_destroy_contiguous_region() calls for
64-bit capable devices.
As the memory in question is owned by swiotlb-xen the PG_owner_priv_1
flag of the first allocated page can be used for remembering.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
range_straddles_page_boundary() is open coding several macros from
include/xen/page.h. Use those instead. Additionally there is no need
to have check_pages_physically_contiguous() as a separate function as
it is used only once, so merge it into range_straddles_page_boundary().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.
Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
In user-space there's no way to distinguish why an mdb entry was deleted
and that is a problem for daemons which would like to keep the mdb in
sync with remote ends (e.g. mlag) but would also like to converge faster.
In almost all cases we'd like to age-out the remote entry for performance
and convergence reasons except when fast-leave is enabled. In that case we
want explicit immediate remote delete, thus add mdb flag which is set only
when the entry is being deleted due to fast-leave.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This variant of netif_napi_add() should be used from drivers
using NAPI to exclusively poll a TX queue.
Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When permanent entries were introduced by the commit below, they were
exempt from timing out and thus igmp leave wouldn't affect them unless
fast leave was enabled on the port which was added before permanent
entries existed. It shouldn't matter if fast leave is enabled or not
if the user added a permanent entry it shouldn't be deleted on igmp
leave.
Before:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
< join and leave 229.1.1.1 on eth4 >
$ bridge mdb show
$
After:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
< join and leave 229.1.1.1 on eth4 >
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
Fixes: ccb1c31a7a ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In phy_led_trigger_change_speed(), there is an if statement on line 48
to check whether phy->last_triggered is NULL:
if (!phy->last_triggered)
When phy->last_triggered is NULL, it is used on line 52:
led_trigger_event(&phy->last_triggered->trigger, LED_OFF);
Thus, a possible null-pointer dereference may occur.
To fix this bug, led_trigger_event(&phy->last_triggered->trigger,
LED_OFF) is called when phy->last_triggered is not NULL.
This bug is found by a static analysis tool STCheck written by
the OSLAB group in Tsinghua University.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The -d command line argument to tdc requires the name of a physical device
on the system where the tests will be run. If -d has not been used, tdc
will skip tests that require a physical device.
This patch is intended to better document what the -d option does and how
it is used.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.
Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c88 ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb317 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes updates to mlx5 driver,
1) Simplifications, cleanup and warning prints improvements
2) From Vlad Buslov:
Refactor mlx5 tc flow handling for unlocked execution (Part 1)
Currently, all cls API hardware offloads driver callbacks require caller
to hold rtnl lock when calling them. Cls API has already been updated to
update software filters in parallel (on classifiers that support
unlocked execution), however hardware offloads code still obtains rtnl
lock before calling driver tc callbacks. This set implements partial
support for unlocked execution that is leveraged by follow up
refactorings in specific mlx5 tc subsystems and patch to cls API that
implements API that allows drivers to register their callbacks as
rtnl-unlocked.
In mlx5 tc code mlx5e_tc_flow is the main structure that is used to
represent tc filter. Currently, code the structure itself and its
handlers in both tc and eswitch layers do not implement any kind of
synchronizations and assume external global synchronization provided by
rtnl lock instead. Implement following changes to remove dependency on
rtnl lock in flow handling code that are intended to be used a
groundwork for following changes to provide fully rtnl-independent mlx5
tc:
- Extend struct mlx5e_tc_flow with atomic reference counter and rcu to
allow concurrent access from multiple tc and neigh update workqueue
instances without introducing any additional locks specific to the
structure. Its 'flags' field type is changed to atomic bitmask ops which
is necessary for tc to interact with other concurrent tc instances or
concurrent neigh update that need to skip flows that are not fully
initialized (new INIT_DONE flow flag) and can change the flags
according to neighbor state (flipping OFFLOADED flag).
- Protect unready flows list by new uplink_priv->unready_flows_lock
mutex.
- Convert calls to netdev APIs that require rtnl lock in flow handling
code to their rcu counterparts.
- Modify eswitch code that is called from tc layer and assume implicit
external synchronization to be concurrency safe: change
esw->offloads.num_flows type to atomic integer and re-arrange
esw->state_lock usage to protect additional data.
Some of approaches to synchronizations presented in this patch set are
quite complicated (lockless concurrent usage of data structures with rcu
and reference counting, using fine-grained locking when necessary, retry
mechanisms to handle concurrent insertion of another instance of data
structure with same key, etc.). This is necessary to allow calling the
firmware in parallel in most cases, which is the main motivation of this
change since firmware calls are mach heavier operation than atomic
operations, multitude of locks and potential multiple retries during
concurrent accesses to same elements.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl0/g+oACgkQSD+KveBX
+j7vqAf/TXz9uGKkXR1EHfRMcrWIjQH6M3zKkrwo2K3wTwssi3ymCNfZH+VYkUwk
LMrVnBQxHHPjuhUfmYfXbswVZiGm5Mul0zFNoeWChvcaEbQzsisHXCNNtzQFy9p2
zQUmmvmvNNFQ0KPuwGuK/0rbUmXM3tXqWs2mtBsRLHxZUvqpGh7hETCFvZ0TnBaO
EeFrWV6h8rfynBsRVeDuFGk5hDoo/ASEbWVTsocpPm6UPhIwKyH/Tbv4+wKZgZfr
p/yPKSjwtQw9jPXj/lYxRXBbbZXey+BEptIurmwh3d8MLyrM4VElP6rgaoAb2Wzq
ov5pnEGR5qsAINkOnImBZ4Mw4HN9WQ==
=UKN2
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-07-29
This series includes updates to mlx5 driver,
1) Simplifications, cleanup and warning prints improvements
2) From Vlad Buslov:
Refactor mlx5 tc flow handling for unlocked execution (Part 1)
Currently, all cls API hardware offloads driver callbacks require caller
to hold rtnl lock when calling them. Cls API has already been updated to
update software filters in parallel (on classifiers that support
unlocked execution), however hardware offloads code still obtains rtnl
lock before calling driver tc callbacks. This set implements partial
support for unlocked execution that is leveraged by follow up
refactorings in specific mlx5 tc subsystems and patch to cls API that
implements API that allows drivers to register their callbacks as
rtnl-unlocked.
In mlx5 tc code mlx5e_tc_flow is the main structure that is used to
represent tc filter. Currently, code the structure itself and its
handlers in both tc and eswitch layers do not implement any kind of
synchronizations and assume external global synchronization provided by
rtnl lock instead. Implement following changes to remove dependency on
rtnl lock in flow handling code that are intended to be used a
groundwork for following changes to provide fully rtnl-independent mlx5
tc:
- Extend struct mlx5e_tc_flow with atomic reference counter and rcu to
allow concurrent access from multiple tc and neigh update workqueue
instances without introducing any additional locks specific to the
structure. Its 'flags' field type is changed to atomic bitmask ops which
is necessary for tc to interact with other concurrent tc instances or
concurrent neigh update that need to skip flows that are not fully
initialized (new INIT_DONE flow flag) and can change the flags
according to neighbor state (flipping OFFLOADED flag).
- Protect unready flows list by new uplink_priv->unready_flows_lock
mutex.
- Convert calls to netdev APIs that require rtnl lock in flow handling
code to their rcu counterparts.
- Modify eswitch code that is called from tc layer and assume implicit
external synchronization to be concurrency safe: change
esw->offloads.num_flows type to atomic integer and re-arrange
esw->state_lock usage to protect additional data.
Some of approaches to synchronizations presented in this patch set are
quite complicated (lockless concurrent usage of data structures with rcu
and reference counting, using fine-grained locking when necessary, retry
mechanisms to handle concurrent insertion of another instance of data
structure with same key, etc.). This is necessary to allow calling the
firmware in parallel in most cases, which is the main motivation of this
change since firmware calls are mach heavier operation than atomic
operations, multitude of locks and potential multiple retries during
concurrent accesses to same elements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since roles_init() adds some entries to the role hash table, we need to
destroy also its keys/values on error, otherwise we get a memory leak in
the error path.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update driver version to 0.7.5
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
As a result of refactoring of VF VSIs interrupts code, there is no
need to track its configuration status again with ICE_VF_STATE_CFG_INTR
flag - In fact, it is not being checked anywhere in the code right now, so
this patch removes the dead code as applicable to the flag.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This flag is not needed and is called every time we re-enable interrupts
in the hotpath so remove it. Also remove ice_vsi_req_irq() because it
was a wrapper function for ice_vsi_req_irq_msix() whose sole purpose was
checking the ICE_FLAG_MSIX_ENA flag.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since Tx rings are being managed by FW/NVM, Tx rings might have not been
set up or driver had already wiped them off - In that case, call to
disable LAN Tx queue is being returned as not in existence. This patch
makes sure we don't return unnecessary error for such scenario.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently if the call to ice_alloc_mapped_page() fails we jump to the
no_buf label, possibly call ice_release_rx_desc(), and return true
indicating that there is more work to do. In the success case we just
fall out of the while loop, possibly call ice_alloc_mapped_page(), and
return false saying we exhausted cleaned_count. This flow can be
improved by breaking if ice_alloc_mapped_page() fails and then the flow
outside of the while loop is the same for the failure and success case.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently we are not reporting dropped counts at the port level to
ethtool or netlink. This was found when debugging Rx dropped issues
and the total packets sent did not equal the total packets received
minus the rx_dropped, which was very confusing. To determine dropped
counts at the port level we need to read the PRTRPB_RDPC register.
To fix reporting we will store the dropped counts in the PF's
rx_discards. This will be reported to netlink by storing it in the
PF VSI's rx_missed_errors signaling that the receiver missed the
packet. Also, we will report this to ethtool in the rx_dropped.nic
field.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In case there is a request from a VF to change its number of queues, and
the request was successful, we need to update number of queues
configured on the VF before updating corresponding VSI for that VF,
especially LAN Tx queue tree and TC update, otherwise, we would continued
to use old value of vf->num_vf_qs for allocated Tx/Rx queues...
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch uses allocated number of Tx queues per VSI to set up its
scheduling tree instead of using total number of available Tx queues.
Only PF VSIs have total number of allocated Tx queues equal to number
of available Tx queues, other VSIs have different number of queues
configured.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently we bump the Rx tail and release/give buffers to hardware every
16 descriptors. This causes us to bump Rx tail up to 4 times per
napi_poll call. Also we are always bumping tail on an odd index and this
is a problem because hardware ignores the lower 3 bits in the QRX_TAIL
register. This is making it so hardware sees tail bumps only every 8
descriptors. Instead lets only bump Rx tail once per napi_poll if
the value aligns with hardware's expectations of the lower 3 bits being
cleared. Also only release/give Rx buffers once per napi_poll call.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.
This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.
Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df628 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb91 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff2895592f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f23 ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876b8 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To properly clear the slab on free with slab_want_init_on_free, we walk
the list of free objects using get_freepointer/set_freepointer.
The value we get from get_freepointer may not be valid. This isn't an
issue since an actual value will get written later but this means
there's a chance of triggering a bug if we use this value with
set_freepointer:
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] PREEMPT PTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a #4
RIP: 0010:kfree+0x58a/0x5c0
Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4
RSP: 0000:ffffffff82603d90 EFLAGS: 00010002
RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000
RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320
RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100
R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300
FS: 0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0
Call Trace:
apply_wqattrs_prepare+0x154/0x280
apply_workqueue_attrs_locked+0x4e/0xe0
apply_workqueue_attrs+0x36/0x60
alloc_workqueue+0x25a/0x6d0
workqueue_init_early+0x246/0x348
start_kernel+0x3c7/0x7ec
x86_64_start_reservations+0x40/0x49
x86_64_start_kernel+0xda/0xe4
secondary_startup_64+0xb6/0xc0
Modules linked in:
---[ end trace f67eb9af4d8d492b ]---
Fix this by ensuring the value we set with set_freepointer is either NULL
or another value in the chain.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Align the RV64 defconfig to the output of "make savedefconfig" to
avoid unnecessary deltas for future defconfig patches. This patch
should have no runtime functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
On FU540-based systems, the "timebase-frequency" (RTCCLK) is sourced
from an external crystal located on the PCB. Thus the
timebase-frequency DT property should be defined by the board that
uses the SoC, not the SoC itself. Drop the superfluous
timebase-frequency property from the SoC DT data. (It's already
present in the board DT data.)
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch fix following perf record error by linking vdso.so with
build id.
perf.data perf.data.old
[ perf record: Woken up 1 times to write data ]
free(): double free detected in tcache 2
Aborted
perf record use filename__read_build_id(util/symbol-minimal.c) to get
build id when libelf is not supported. When vdso.so is linked without
build id, the section size of PT_NOTE will be zero, buf size will
realloc to zero and cause memory corruption.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
- Fix trace event header include guards, as several did not match
the #define to the #ifdef
- Remove a redundant test to ftrace_graph_notrace_addr() that
was accidentally added.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXUFythQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsjjAP41jDPQogZMaQZrPW1qyp69DHhuZXI2
j/d7A2LG76mCggD/WHPBk8P98IHk7pO5Ndl4yLKS3plMCYqTcgylpJLMXQI=
=yEpO
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor fixes:
- Fix trace event header include guards, as several did not match the
#define to the #ifdef
- Remove a redundant test to ftrace_graph_notrace_addr() that was
accidentally added"
* tag 'trace-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
fgraph: Remove redundant ftrace_graph_notrace_addr() test
tracing: Fix header include guards in trace event headers
This patch adds code to clear VFs enable status until reset is completed,
and Tx/Rx rings are setup. Without this patch, the code flow request Tx
queues to be disabled after reset, especially PFR - where VF VSI Tx rings
have already been wiped off in the NVM and result to adminq error based on
the call to disable Tx LAN queue in ice_reset_all_vfs function call.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The firmware reports an error when trying to configure a port with no
media. Instead of always configuring the port, check for media before
attempting to configure it. In the absence of media, turn off link and
poll for media to become available before re-enabling link.
Move ice_force_phys_link_state() up to avoid forward declaration.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The ice_init_all_ctrlq and ice_shutdown_all_ctrlq functions create and
destroy the locks used to protect the send and receive process of each
control queue.
This is problematic, as the driver may use these functions to shutdown
and re-initialize the control queues at run time. For example, it may do
this in response to a device reset.
If the driver failed to recover from a reset, it might leave the control
queues offline. In this case, the locks will no longer be initialized.
A later call to ice_sq_send_cmd will then attempt to acquire a lock that
has been destroyed.
It is incorrect behavior to access a lock that has been destroyed.
Indeed, ice_aq_send_cmd already tries to avoid accessing an offline
control queue, but the check occurs inside the lock.
The root of the problem is that the locks are destroyed at run time.
Modify ice_init_all_ctrlq and ice_shutdown_all_ctrlq such that they no
longer create or destroy the locks.
Introduce new functions, ice_create_all_ctrlq and ice_destroy_all_ctrlq.
Call these functions in ice_init_hw and ice_deinit_hw.
Now, the control queue locks will remain valid for the life of the
driver, and will not be destroyed until the driver unloads.
This also allows removing a duplicate check of the sq.count and
rq.count values when shutting down the controlqs. The ice_shutdown_ctrlq
function already checks this value under the lock. Previously
commit dec64ff10e ("ice: use [sr]q.count when checking if queue is
initialized") needed this check to happen outside the lock, because it
prevented duplicate attempts at destroying the locks.
The driver may now safely use ice_init_all_ctrlq and
ice_shutdown_all_ctrlq while handling reset events, without causing the
locks to be invalid.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently we are always setting prefena to 0. This is causing the
hardware to only fetch descriptors when there are none free in the cache
for a received packet instead of prefetching when it has used the last
descriptor regardless of incoming packets. Fix this by allowing the
hardware to prefetch Rx descriptors.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When interrupt tracking was refactored, during rebuild, the call to
ice_vsi_setup_vector_base() was inadvertently removed from the PF VSI
instead of being removed from the VF VSI. During reset, the failure to
properly setup the vector base generates a call trace. Correct this so
that resets/rebuilds properly complete.
Fixes: cbe66bfee6 ("ice: Refactor interrupt tracking")
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
