* net/mlx5: Add sniffer namespaces
* net/mlx5: Introduce sniffer steering hardware capabilities
* net/mlx5: Configure IB devices according to LAG state
* net/mlx5: Vport LAG creation support
* net/mlx5: Add LAG flow steering namespace
* net/mlx5: LAG demux flow table support
* net/mlx5: LAG and SRIOV cannot be used together
* net/mlx5e: Avoid port remapping of mlx5e netdev TISes
* net/mlx5: Get RoCE netdev
* net/mlx5: Implement RoCE LAG feature
* net/mlx5: Add HW interfaces used by LAG
* net/mlx5: Separate query_port_proto_oper for IB and EN
* net/mlx5: Expose mlx5e_link_mode
* net/mlx5: Update struct mlx5_ifc_xrqc_bits
* net/mlx5: Modify RQ bitmask from mlx5 ifc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+m21
-----END PGP SIGNATURE-----
Merge tag 'shared-for-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma into mlx5-shared
Mellanox ConnectX-4/Connect-IB shared code (SW part)
* net/mlx5: Add sniffer namespaces
* net/mlx5: Introduce sniffer steering hardware capabilities
* net/mlx5: Configure IB devices according to LAG state
* net/mlx5: Vport LAG creation support
* net/mlx5: Add LAG flow steering namespace
* net/mlx5: LAG demux flow table support
* net/mlx5: LAG and SRIOV cannot be used together
* net/mlx5e: Avoid port remapping of mlx5e netdev TISes
* net/mlx5: Get RoCE netdev
* net/mlx5: Implement RoCE LAG feature
* net/mlx5: Add HW interfaces used by LAG
* net/mlx5: Separate query_port_proto_oper for IB and EN
* net/mlx5: Expose mlx5e_link_mode
* net/mlx5: Update struct mlx5_ifc_xrqc_bits
* net/mlx5: Modify RQ bitmask from mlx5 ifc
This new firmware for the qed* adpaters fixes several issues:
- Better blocking of malicious VFs.
- After FLR, Tx-switching [internal routing] of packets might
be incorrect.
- Deletion of unicast MAC filters would sometime have side-effect
of corrupting the MAC filters configred for a device.
It also contains fixes for future qed* drivers that *hopefully* would be
sent for review in the near future.
In addition, it would allow driver some new functionality, including:
- Allowing PF/VF driver compaitibility with old drivers [running
pre-8.10.5.0 firmware].
- Better debug facilities.
This would also bump the qed* driver versions to 8.10.9.20.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 8f6fd83c6c ("rhashtable:
accept GFP flags in rhashtable_walk_init") added a GFP flag argument
to rhashtable_walk_init because some users wish to use the walker
in an unsleepable context.
In fact we don't need to allocate memory in rhashtable_walk_init
at all. The walker is always paired with an iterator so we could
just stash ourselves there.
This patch does that by introducing a new enter function to replace
the existing init function. This way we don't have to churn all
the existing users again.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This work adds a bpf_skb_change_tail() helper for tc BPF programs. The
basic idea is to expand or shrink the skb in a controlled manner. The
eBPF program can then rewrite the rest via helpers like bpf_skb_store_bytes(),
bpf_lX_csum_replace() and others rather than passing a raw buffer for
writing here.
bpf_skb_change_tail() is really a slow path helper and intended for
replies with f.e. ICMP control messages. Concept is similar to other
helpers like bpf_skb_change_proto() helper to keep the helper without
protocol specifics and let the BPF program mangle the remaining parts.
A flags field has been added and is reserved for now should we extend
the helper in future.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can
be found in two packages (versions): BCM53573 and BCM47189. It shares
some code with the Northstar family, but also requires some new quirks.
First of all there can be up to 2 Ethernet cores on this SoC. If that is
the case, they are connected to two different switch ports allowing some
more complex/optimized setups. It seems the second unit doesn't come
fully configured and requires some IRQ quirk.
Other than that only the first core is connected to the PHY. For the
second one we have to register fixed PHY (similarly to the Northstar),
otherwise generic PHY driver would get some invalid info.
This has been successfully tested on Tenda AC9 (BCM47189B0).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add vlan priority check to the flow dissector by adding new flow
dissector struct, flow_dissector_key_vlan which includes vlan tag
fields.
vlan_id and flow_label fields were under the same struct
(flow_dissector_key_tags). It was a convenient setting since struct
flow_dissector_key_tags is used by struct flow_keys and by setting
vlan_id and flow_label under the same struct, we get precisely 24 or 48
bytes in flow_keys from flow_dissector_key_basic.
Now, when adding vlan priority support, the code will be cleaner if
flow_label and vlan tag won't be under the same struct anymore.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When moving into using ethtool's link_ksetting, qed started
supplying its own bitmask of speed/capabilities, but qede
is still checking for the SUPPORTED value to determine whether
it supports pause.
Fixes: 054c67d1c8 ("qed*: Add support for ethtool link_ksettings callbacks")
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add sniffer TX and RX namespaces to receive ingoing and outgoing
traffic.
Each outgoing/incoming packet is duplicated and steered to the sniffer
TX/RX namespace in addition to the regular flow.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Define needed hardware capabilities for sniffer
RX and TX flow tables.
Add the following capabilities:
1. Sniffer RX flow table capabilities.
2. Sniffer TX flow table capabilities.
3. If same TIR can be used by multiple flow tables of different types.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add interfaces for issuing CREATE_VPORT_LAG and
DESTROY_VPORT_LAG commands.
Used for receiving PF1's eth traffic on PF0's
root ft.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This namespace is used for LAG demux flowtable.
The idea is to position the LAG demux ft between
bypass and kernel flowtables, allowing raw-eth
traffic from both ports to be received by the PF0
IB device.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add interfaces to allow the creation and destruction of a
LAG demux flow table.
It is a special flow table used during LAG for redirecting
non user-mode packets from PF0 to PF1 root ft, if a packet was
received on phys port two.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Used by IB driver for determining the IB bond
device's netdev, when LAG is active.
Returns PF0's netdev if mode is not active-backup,
or the PF netdev of the active slave when mode is
active-backup.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Available on dual port cards only, this feature keeps
track, using netdev LAG events, of the bonding
and link status of each port's PF netdev.
When both of the card's PF netdevs are enslaved to the
same bond/team master, and only them, LAG state
is active.
During LAG, only one IB device is present for both ports.
In addition to the above, this commit includes FW commands
used for managing the LAG, new facilities for adding and removing
a single device by interface, and port remap functionality according to
bond events.
Please note that this feature is currently used only for mimicking
Ethernet bonding for RoCE - netdevs functionality is not altered,
and their bonding continues to be managed solely by bond/team driver.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Exposed LAG commands enum and layouts:
- CREATE_LAG
HW enters LAG mode:
RoCE traffic from port two is received on PF0 core dev.
Allows to set tx_affinity (tx port) for QPs and TISes.
Allows to port remap QPs and TISes, overriding their
tx_affinity behavior.
- MODIFY_LAG
Remap QPs and TISes to another port.
- QUERY_LAG
Query whether LAG mode is active.
- DESTROY_LAG
HW exits LAG mode, returning to non-LAG behavior.
- CREATE_VPORT_LAG
Merge Ethernet flow steering, such that traffic received on port
two jumps to PF0 root flow table.
Available only in LAG mode.
- DESTROY_VPORT_LAG
Ethernet flow steering returns to non-LAG behavior.
Caps added:
- lag_master
Driver is in charge of managing the LAG.
This is currently the only option.
- num_lag_ports
LAG is supported only if this field's value is 2.
Other fields:
- QP/TIS tx port affinity
During LAG, this field controls on which port a QP or TIS resides.
- TIS strict tx affinity
When this field is set, the TIS will not be subject to port remap by
CREATE_LAG/MODIFY_LAG.
- LAG demux flow table
Flow table used for redirecting non user-space traffic back to
PF1 root flow table, if the packet was received on port two.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Replaced mlx5_query_port_proto_oper with separate functions per link
type. The functions should take different arguments so no point in
trying to unite them.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The mlx5e_link_mode enumeration will also be used in mlx5_ib for RoCE.
This patch moves the enumeration to the mlx5 driver port header file.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update struct mlx5_ifc_xrqc_bits according to last specification
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use mlx5 ifc MODIFY_BITMASK_VSD in mlx5e_modify_rq_vsd and expose counter
set capability bit in hca caps structure.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
Add the required definitions related to vxlan encap/decap.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement the low-level part of the PF side in setting minimum
inline header mode for VFs.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Now as all commands use mlx5 ifc interface, instead of doing two calls
for executing a command we embed command status checking into
mlx5_cmd_exec to simplify the interface.
Also we do here some cleanup for redundant software structures
(inbox/outbox) and functions and improved command failure output.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Prior to this patch we assumed that modify QP commands have the
same layout.
In ConnectX-4 for each QP transition there is a specific command
and their layout can vary.
e.g: 2err/2rst commands don't have QP context in their layout and before
this patch we posted the QP context in those commands.
Fortunately the FW only checks the suffix of the commands and executes
them, while ignoring all invalid data sent after the valid command
layout.
This patch removes mlx5_modify_qp_mbox_in and changes
mlx5_core_qp_modify to receive the required transition and QP context
with opt_param_mask if needed. This way the caller is not required to
provide the command inbox layout and it will be generated automatically.
mlx5_core_qp_modify will generate the command inbox/outbox layouts
according to the requested transition and will fill the requested
parameters.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove old representation of manually created QP/XRCD commands layout
amd use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If net namespace is attached to a user namespace let's make container's
root owner of sysctls affecting said network namespace instead of global
root.
This also allows us to clean up net_ctl_permissions() because we do not
need to fudge permissions anymore for the container's owner since it now
owns the objects in question.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove old representation of manually created MKey/PSV commands layout,
and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove old representation of manually created CQ commands layout,
and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove old representation of manually created EQ commands layout,
and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove old representation of manually created MCG commands layout
and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove old representation of manually created ACCESS_REG/MAD_IFC
commands layout and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove old representation of manually created Init/Teardown hca
commands layout and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The idea for type_check in dev_get_nest_level() was to count the number
of nested devices of the same type (currently, only macvlan or vlan
devices).
This prevented the false positive lockdep warning on configurations such
as:
eth0 <--- macvlan0 <--- vlan0 <--- macvlan1
However, this doesn't prevent a warning on a configuration such as:
eth0 <--- macvlan0 <--- vlan0
eth1 <--- vlan1 <--- macvlan1
In this case, all the locks end up with a nesting subclass of 1, so
lockdep thinks that there is still a deadlock:
- in the first case we have (macvlan_netdev_addr_lock_key, 1) and then
take (vlan_netdev_xmit_lock_key, 1)
- in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then
take (macvlan_netdev_addr_lock_key, 1)
By removing the linktype check in dev_get_nest_level() and always
incrementing the nesting depth, lockdep considers this configuration
valid.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
PPC splits debugfs initialization from creation of the xics device to
unlock the newly taken kvm lock earlier.
s390 prevents userspace from triggering two WARN_ON_ONCE.
MIPS fixes several issues in the management of TLB faults (Cc: stable).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXrx2ZAAoJEED/6hsPKofoo/4H/jra5NNxvpo09LWlXTwGXxBH
cwcfDZSiOFxgvWztKJOIjPI4ETL3mnZvb9SFWBZZh1U0kfZ/TGiWouwaDNlBkPYj
I3YHuPI7if+yUOmJlI3N2hWa0Wo0qiMqIjKT0pQVSLLdK/CVE+xGyS+qtXTNXHQn
pFdKlYr//7OwQEY0ow1yj5VnsFrXB1JWFyB/+N5zaCfbCaQVyZAL7rj8SUbC/32W
CiNhrvatzierKIfPerWw8DvvBKhCgWaRuLl0W+uMncrC9Qepcx9moM2beD1txK2I
iHor1TDxUPifGQONfWMAlw87FluzHF4vQ5nN2jyTi8TT+CEfZpZ43Q+DY7okD4w=
=NQP9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"KVM:
- lock kvm_device list to prevent corruption on device creation.
PPC:
- split debugfs initialization from creation of the xics device to
unlock the newly taken kvm lock earlier.
s390:
- prevent userspace from triggering two WARN_ON_ONCE.
MIPS:
- fix several issues in the management of TLB faults (Cc: stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
MIPS: KVM: Propagate kseg0/mapped tlb fault errors
MIPS: KVM: Fix gfn range check in kseg0 tlb faults
MIPS: KVM: Add missing gfn range check
MIPS: KVM: Fix mapped fault broken commpage handling
KVM: Protect device ops->create and list_add with kvm->lock
KVM: PPC: Move xics_debugfs_init out of create
KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed
KVM: s390: set the prefix initially properly
Pull block fixes from Jens Axboe:
- an NVMe fix from Gabriel, fixing a suspend/resume issue on some
setups
- addition of a few missing entries in the block queue sysfs
documentation, from Joe
- a fix for a sparse shadow warning for the bvec iterator, from
Johannes
- a writeback deadlock involving raid issuing barriers, and not
flushing the plug when we wakeup the flusher threads. From
Konstantin
- a set of patches for the NVMe target/loop/rdma code, from Roland and
Sagi
* 'for-linus' of git://git.kernel.dk/linux-block:
bvec: avoid variable shadowing warning
doc: update block/queue-sysfs.txt entries
nvme: Suspend all queues before deletion
mm, writeback: flush plugged IO in wakeup_flusher_threads()
nvme-rdma: Remove unused includes
nvme-rdma: start async event handler after reconnecting to a controller
nvmet: Fix controller serial number inconsistency
nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads
nvmet-rdma: Correctly handle RDMA device hot removal
nvme-rdma: Make sure to shutdown the controller if we can
nvme-loop: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Free the I/O tags when we delete the controller
nvme-rdma: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Fix device removal handling
nvme-rdma: Queue ns scanning after a sucessful reconnection
nvme-rdma: Don't leak uninitialized memory in connect request private data
This commit adds an inline function to cgroup.h to check whether a given
task is under a given cgroup hierarchy. This is to avoid having to put
ifdefs in .c files to gate access to cgroups. When cgroups are disabled
this always returns true.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
perf-cgroups fix and an AUX events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add enable_box for client MSR uncore
perf/x86/intel/uncore: Fix uncore num_counters
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
perf/core: Set cgroup in CPU contexts for new cgroup events
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
perf probe ppc64le: Fix probe location when using DWARF
perf probe: Add function to post process kernel trace events
tools: Sync cpufeatures headers with the kernel
toops: Sync tools/include/uapi/linux/bpf.h with the kernel
tools: Sync cpufeatures.h and vmx.h with the kernel
perf probe: Support signedness casting
perf stat: Avoid skew when reading events
perf probe: Fix module name matching
perf probe: Adjust map->reloc offset when finding kernel symbol from map
perf hists: Trim libtraceevent trace_seq buffers
perf script: Add 'bpf-output' field to usage message
Pull irq fix from Ingo Molnar:
"A fix for an MSI regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Make sure PCI MSIs are activated early
Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user needs
multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of SO_REUSEPORT,
and that prevented the use of multiple different NFS versions to the
same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UHph
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user
needs multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of
SO_REUSEPORT, and that prevented the use of multiple different NFS
versions to the same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses"
* tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Cap the transport reconnection timer at 1/2 lease period
NFSv4: Cleanup the setting of the nfs4 lease period
SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout
SUNRPC: Fix reconnection timeouts
NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED
SUNRPC: disable the use of IPv6 temporary addresses.
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Fix up socket autodisconnect
SUNRPC: Handle EADDRNOTAVAIL on connection failures
KVM devices were manipulating list data structures without any form of
synchronization, and some implementations of the create operations also
suffered from a lack of synchronization.
Now when we've split the xics create operation into create and init, we
can hold the kvm->lock mutex while calling the create operation and when
manipulating the devices list.
The error path in the generic code gets slightly ugly because we have to
take the mutex again and delete the device from the list, but holding
the mutex during anon_inode_getfd or releasing/locking the mutex in the
common non-error path seemed wrong.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
As we are about to hold the kvm->lock during the create operation on KVM
devices, we should move the call to xics_debugfs_init into its own
function, since holding a mutex over extended amounts of time might not
be a good idea.
Introduce an init operation on the kvm_device_ops struct which cannot
fail and call this, if configured, after the device has been created.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Due to the (indirect) nesting of min(..., min(...)), sparse will
show a variable shadowing warning whenever bvec.h is included.
Avoid that by assigning the inner min() to a temporary variable first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds the driver implementation for ethtool link_ksettings
callbacks. qed driver now defines/uses the qed specific masks for
representing link capability values. qede driver maps these values to
to new link modes defined by the kernel implementation of link_ksettings.
Please consider applying this to 'net-next' branch.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the per-device linked list into a hashtable. The primary
motivation for this change is that currently, we're not tracking all the
qdiscs in hierarchy (e.g. excluding default qdiscs), as the lookup
performed over the linked list by qdisc_match_from_root() is rather
expensive.
The ultimate goal is to get rid of hidden qdiscs completely, which will
bring much more determinism in user experience.
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a perf stat bug easy to observer on a machine with only one cgroup:
$ perf stat -e cycles -I 1000 -C 0 -G /
# time counts unit events
1.000161699 <not counted> cycles /
2.000355591 <not counted> cycles /
3.000565154 <not counted> cycles /
4.000951350 <not counted> cycles /
We'd expect some output there.
The underlying problem is that there is an optimization in
perf_cgroup_sched_{in,out}() that skips the switch of cgroup events
if the old and new cgroups in a task switch are the same.
This optimization interacts with the current code in two ways
that cause a CPU context's cgroup (cpuctx->cgrp) to be NULL even if a
cgroup event matches the current task. These are:
1. On creation of the first cgroup event in a CPU: In current code,
cpuctx->cpu is only set in perf_cgroup_sched_in, but due to the
aforesaid optimization, perf_cgroup_sched_in will run until the next
cgroup switches in that CPU. This may happen late or never happen,
depending on system's number of cgroups, CPU load, etc.
2. On deletion of the last cgroup event in a cpuctx: In list_del_event,
cpuctx->cgrp is set NULL. Any new cgroup event will not be sched in
because cpuctx->cgrp == NULL until a cgroup switch occurs and
perf_cgroup_sched_in is executed (updating cpuctx->cgrp).
This patch fixes both problems by setting cpuctx->cgrp in list_add_event,
mirroring what list_del_event does when removing a cgroup event from CPU
context, as introduced in:
commit 68cacd2916 ("perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()")
With this patch, cpuctx->cgrp is always set/clear when installing/removing
the first/last cgroup event in/from the CPU context. With cpuctx->cgrp
correctly set, event_filter_match works as intended when events are
sched in/out.
After the fix, the output is as expected:
$ perf stat -e cycles -I 1000 -a -G /
# time counts unit events
1.004699159 627342882 cycles /
2.007397156 615272690 cycles /
3.010019057 616726074 cycles /
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1470124092-113192-1-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 874f9c7da9.
Geert Uytterhoeven reports:
"This change seems to have an (unintendent?) side-effect.
Before, pr_*() calls without a trailing newline characters would be
printed with a newline character appended, both on the console and in
the output of the dmesg command.
After this commit, no new line character is appended, and the output
of the next pr_*() call of the same type may be appended, like in:
- Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000
- Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)
+ Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)"
Joe Perches says:
"No, that is not intentional.
The newline handling code inside vprintk_emit is a bit involved and
for now I suggest a revert until this has all the same behavior as
earlier"
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Requested-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bharat Kumar Gogada reported issues with the generic MSI code, where the
end-point ended up with garbage in its MSI configuration (both for the vector
and the message).
It turns out that the two MSI paths in the kernel are doing slightly different
things:
generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP
PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI
And it turns out that end-points are allowed to latch the content of the MSI
configuration registers as soon as MSIs are enabled. In Bharat's case, the
end-point ends up using whatever was there already, which is not what you
want.
In order to make things converge, we introduce a new MSI domain flag
(MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set,
this flag forces the programming of the end-point as soon as the MSIs are
allocated.
A consequence of this is that we have an extra activate in irq_startup, but
that should be without much consequence.
tglx:
- Several people reported a VMWare regression with PCI/MSI-X passthrough. It
turns out that the patch also cures that issue.
- We need to have a look at the MSI disable interrupt path, where we write
the msg to all zeros without disabling MSI in the PCI device. Is that
correct?
Fixes: 52f518a3a7 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts"
Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru>
Reported-by: Matthias Prager <linux@matthiasprager.de>
Reported-by: Jason Taylor <jason.taylor@simplivity.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MFW now supports the Selection field for IEEE mode. Add driver changes to
use the newer MFW masks to read/write the port-id value.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
