This patch adds pedit_headers_action structure to store the result of
parsing tc pedit actions. Then, it calls alloc_tc_pedit_action() to
populate the mlx5e hardware intermediate representation once all actions
have been parsed.
This patch comes in preparation for the new flow_action infrastructure,
where each packet mangling comes in an separated action, ie. not packed
as in tc pedit.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Acked-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
This patch wraps the dissector key and mask - that flower uses to
represent the matching side - around the flow_match structure.
To avoid a follow up patch that would edit the same LoCs in the drivers,
this patch also wraps this new flow match structure around the flow rule
object. This new structure will also contain the flow actions in follow
up patches.
This introduces two new interfaces:
bool flow_rule_match_key(rule, dissector_id)
that returns true if a given matching key is set on, and:
flow_rule_match_XYZ(rule, &match);
To fetch the matching side XYZ into the match container structure, to
retrieve the key and the mask with one single call.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Heiner Kallweit says:
====================
net: phy: add and use further MMD accessors
Add MMD accessors for modifying MMD registers and clearing / setting
bits in MMD registers. Use these accessors in PHY drivers and phylib.
v2:
- fix SoB in patch 2
====================
Signed-off-by: David S. Miller <[email protected]>
This adds full set of locked and unlocked accessor functions to read and
write PHY MMD registers and/or bitfields.
Set of functions exactly matches what is already available for PHY
legacy registers.
Signed-off-by: Nikita Yushchenko <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
First set of patches for 5.1. Lots of new features in various drivers
but nothing really special standing out.
Major changes:
brcmfmac
* DMI nvram filename quirk for PoV TAB-P1006W-232 tablet
rsi
* support for hardware scan offload
iwlwifi
* support for Target Wakeup Time (TWT) -- a feature that allows the AP
to specify when individual stations can access the medium
* support for mac80211 AMSDU handling
* some new PCI IDs
* relicense the pcie submodule to dual GPL/BSD
* reworked the TOF/CSI (channel estimation matrix) implementation
* Some product name updates in the human-readable strings
mt76
* energy detect regulatory compliance fixes
* preparation for MT7603 support
* channel switch announcement support
mwifiex
* support for sd8977 chipset
qtnfmac
* support for 4addr mode
* convert to SPDX license identifiers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcWoRZAAoJEG4XJFUm622bOm4H/j2Tt6qS5yz3ioH2I7R+f7e/
8C2JJia+uQs8iChdyCjCFcDymmjB2l5u72JvupwCdERzp3okv/xmJiLW5wFW2z4x
B3Nrd4FV2EMIdsRXg1RWbwZHC4wIY6lFhL1OcUcuNwpb5ab1ppvQFHmH5logd7DC
euFSe02g8xmXdUMciRDKGUdiSiDIApmx9dUfguaqYtepqeW3hmDEEkeDicaf2fjq
cM5qAvssIAgUTqwIImEQQEU7j7A2TgMYkRBNzwv2QG47jy6OlgXkZVByvtq59irg
v4BFNtG6uRWTugxQ/FwYWeqsrnjegFNKm5MFbS6BDxbe05M7QzeK8zm55fE9ZGk=
=cHbd
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2019-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 5.1
First set of patches for 5.1. Lots of new features in various drivers
but nothing really special standing out.
Major changes:
brcmfmac
* DMI nvram filename quirk for PoV TAB-P1006W-232 tablet
rsi
* support for hardware scan offload
iwlwifi
* support for Target Wakeup Time (TWT) -- a feature that allows the AP
to specify when individual stations can access the medium
* support for mac80211 AMSDU handling
* some new PCI IDs
* relicense the pcie submodule to dual GPL/BSD
* reworked the TOF/CSI (channel estimation matrix) implementation
* Some product name updates in the human-readable strings
mt76
* energy detect regulatory compliance fixes
* preparation for MT7603 support
* channel switch announcement support
mwifiex
* support for sd8977 chipset
qtnfmac
* support for 4addr mode
* convert to SPDX license identifiers
====================
Signed-off-by: David S. Miller <[email protected]>
When compiling test_maps selftest with GCC-8, it warns that an array
might be indexed with a negative value, which could cause a negative
out of bound access, depending on parameters of the function. This
is the GCC-8 warning:
gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include test_maps.c /home/breno/Devel/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /home/breno/Devel/linux/tools/testing/selftests/bpf/test_maps
In file included from test_maps.c:16:
test_maps.c: In function ‘run_all_tests’:
test_maps.c:1079:10: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds]
assert(waitpid(pid[i], &status, 0) == pid[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
test_maps.c:1059:6: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds]
pid[i] = fork();
~~~^~~
This patch simply guarantees that the task(s) variables are unsigned,
thus, they could never be a negative number (which they are not in
current code anyway), hence avoiding an out of bound access warning.
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Jakub Kicinski says:
====================
Offloaded and native/driver XDP programs can already coexist.
Allow offload and generic hook to coexist as well, there seem
to be no reason why not to do so.
====================
Signed-off-by: Daniel Borkmann <[email protected]>
Test adding the offloaded program after the other program
is already installed.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Figuring out which exact check in test_offload.py takes more
time than it should. Print the traceback (to the screen and
the logs).
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Since commit a25717d2b6 ("xdp: support simultaneous driver and
hw XDP attachment") users can load an XDP program for offload and
in native driver mode simultaneously. Allow a similar mix of
offload and SKB mode/generic XDP.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Recent changes added extack to program replacement path,
expect extack instead of generic messages.
Fixes: 01dde20ce0 ("xdp: Provide extack messages when prog attachment failed")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Commit 96408c4344 ("tools/bpf: implement libbpf
btf__get_map_kv_tids() API function") refactored
function bpf_map_find_btf_info() and moved bulk of
implementation into btf.c as btf__get_map_kv_tids().
This change introduced a bug such that test_btf will
print out the following warning although the test passed:
BTF libbpf test[2] (test_btf_nokv.o): libbpf: map:btf_map
container_name:____btf_map_btf_map cannot be found
in BTF. Missing BPF_ANNOTATE_KV_PAIR?
Previously, the error message is guarded with pr_debug().
Commit 96408c4344 changed it to pr_warning() and
hence caused the warning.
Restoring to pr_debug() for the message fixed the issue.
Fixes: 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-02-05
This series contains updates to igc, e1000e, ixgbe, fm10k and driver
documentation.
Kai-Heng Feng fixes an e1000e issue where the Wake-On-LAN settings where
being set incorrectly during a system suspend.
Sasha addresses community feedback on the igc driver and provides a
number of code cleanups to remove either unreachable or unused code. In
addition, added basic ethtool support for the igc driver.
Mike Rapoport fixes the formatting of the kernel driver documentation so
that the title is properly formatted and does not get lumped with the
document sections in the HTML kernel documents generated.
Jiri Kosina updates a hard coded RAR entries value with the existing
define IXGBE_82599_RAR_ENTRIES.
Jake fixes up whitespace in the fm10k driver.
Konstantin Khlebnikov fixes an issue where in some cases, the e1000e
driver will continually reset during a system boot because the watchdog
task sees items in the transmit buffer but the carrier is off (trying to
establish link) causing the device reset to flush the buffer. To
resolve, just move this check/flush into the watchdog section for when
the carrier is off.
Todd bumps the igb driver version to reflect the recent driver changes.
====================
Signed-off-by: David S. Miller <[email protected]>
Commit 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
added the API function btf__get_map_kv_tids():
btf__get_map_kv_tids(const struct btf *btf, char *map_name, ...)
The parameter map_name has type "char *". This is okay inside libbpf library since
the map_name is from bpf_map->name which also has type "char *".
This will be problematic if the caller for map_name already has attribute "const",
e.g., from C++ string.c_str(). It will result in either a warning or an error.
/home/yhs/work/bcc/src/cc/btf.cc:166:51:
error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
return btf__get_map_kv_tids(btf_, map_name.c_str()
This patch added "const" attributes to map_name parameter.
Fixes: 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
Signed-off-by: Yonghong Song <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Commit 9c65112744 ("selftests/btf: add initial BTF dedup tests")
added dedup tests in test_btf.c.
It broke the raw test:
BTF raw test[71] (func proto (Bad arg name_off)):
btf_raw_create:2905:FAIL Error getting string #65535, strs_cnt:1
The test itself encodes invalid func_proto parameter name
offset 0xffffFFFF as a negative test for the kernel.
The above commit changed the meaning of that offset and
resulted in a user space error.
#define NAME_NTH(N) (0xffff0000 | N)
#define IS_NAME_NTH(X) ((X & 0xffff0000) == 0xffff0000)
#define GET_NAME_NTH_IDX(X) (X & 0x0000ffff)
Currently, the kernel permits maximum name offset 0xffff.
Set the test name off as 0x0fffFFFF to trigger the kernel
verification failure.
Cc: Andrii Nakryiko <[email protected]>
Fixes: 9c65112744 ("selftests/btf: add initial BTF dedup tests")
Signed-off-by: Yonghong Song <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
This patch adds basic ethtool support to the device to allow
for configuration.
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
With recent changes, need to bump the driver version to reflect the
changes.
Signed-off-by: Todd Fujinaka <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Remove the redundant 'igc_get_phy_id_base' method and use
the 'igc_get_phy_id' method directly instead.
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Remove the redundant 'igc_read_mac_addr_base' method and use
the 'igc_read_mac_addr' method directly instead.
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.
[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 27.174495] 8021q: 802.1Q VLAN Support v1.8
[ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 30.898564] netpoll: netconsole: local port 6666
[ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[ 30.898567] netpoll: netconsole: interface 'eth1'
[ 30.898568] netpoll: netconsole: remote port 6666
[ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[ 30.917747] console [netcon0] enabled
[ 30.917749] netconsole: network logging started
[ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.
Signed-off-by: Konstantin Khlebnikov <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Remove the 'igc_get_link_up_info_base method' from igc_base.c file.
Use the 'igc_get_speed_and_duplex_copper' method directly and reduce
the code redundancy.
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Remove unused igc_adv_data_desc definition from igc_base.h file.
Descriptors definition will be added per demand.
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
The change is based on the issue found by Kangjie Lu <[email protected]> where
we not checking the return value of a register read/write which could result
in a NULL pointer dereference if the read/write fails.
Since we are only trying to disable the far-end loopback, if the read
and write of register fails, we do not want to bail out of the function.
We just want to log that it failed to disable and continue on.
CC: Sasha Neftin <[email protected]>
CC: Kangjie Lu <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
The function comment for fm10k_iov_msg_msix_pf has an extra space in
a sentence, which is unnecessary.
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
ixgbe_reset_hw_82599() resets the value of hw->mac.num_rar_entries to
pre-defined value of 128. Let's get rid of that hardcoded literal, and use
IXGBE_82599_RAR_ENTRIES instead, the same way the normal initialization
path does.
Signed-off-by: Jiri Kosina <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
The documentation of Intel drivers is missing the heading adornment for
document titles.
This causes the generated html to have TOC entries from these documents to
appear as top level TOC entries:
* Linux* Base Driver for Intel(R) Ethernet Network Connection
* Contents
* Identifying Your Adapter
* Command Line Parameters
* AutoNeg
* Duplex
...
Add overline heading adornment to document titles.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Address community comment.
Remove the unreachable code leads to the static checker warning.
PHY functionality will be added later per demand.
Reported by Dan Carpenter.
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
e1000e sets different WoL settings in system suspend callback and
runtime suspend callback.
The suspend direct complete optimization leaves e1000e in runtime
suspended state with wrong WoL setting during system suspend.
To fix this, we need to disable suspend direct complete optimization to
let e1000e always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: Kai-Heng Feng <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Sven Auhagen reports that if he changes a SFP+ module for a SFP module
on the Macchiatobin Single Shot, the link does not come back up. For
Sven, it is as easy as:
- Insert a SFP+ module connected, and use ping6 to verify link is up.
- Remove SFP+ module
- Insert SFP 1000base-X module use ping6 to verify link is up: Link
up event did not trigger and the link is down
but that doesn't show the problem for me. Locally, this has been
reproduced by:
- Boot with no modules.
- Insert SFP+ module, confirm link is up.
- Replace module with 25000base-X module. Confirm link is up.
- Set remote end down, link is reported as dropped at both ends.
- Set remote end up, link is reported up at remote end, but not local
end due to lack of link interrupt.
Fix this by setting up both GMAC and XLG interrupts for port 0, but
only unmasking the appropriate interrupt according to the current mode
set in the mac_config() method. However, only do the mask/unmask
dance when we are really changing the link mode to avoid missing any
link interrupts.
Tested-by: Sven Auhagen <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Use the phy_interface_mode_is_8023z() helper for detecting interface
modes that use 802.3z serial encoding. This is equivalent to testing
for both 1000base-X and 2500base-X.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Moritz Fischer says:
====================
nixge: Fixed-link support
This series adds fixed-link support to nixge.
The first patch corrects the binding to correctly reflect
hardware that does not come with MDIO cores instantiated.
The second patch adds fixed link support to the driver.
The third patch updates the binding document with the now
optional (formerly required) phy-handle property and references
the fixed-link docs.
====================
Signed-off-by: David S. Miller <[email protected]>
Update device-tree binding with fixed-link support.
With fixed-link support the formerly required property 'phy-handle'
is now optional if 'fixed-link' child is present.
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Add support for fixed-link configurations to nixge driver.
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Make MDIO child optional and only instantiate the
MDIO bus if the child is actually present.
There are currently no (in-tree) users of this
binding; all (out-of-tree) users use overlays that
get shipped together with the FPGA images that contain
the IP.
This will significantly increase maintainabilty
of future revisions of this IP.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Björn Töpel says:
====================
This v2 series adds an RV64G BPF JIT to the kernel.
At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES (Patrick Stählin sent out an RFC last year), which
means that CONFIG_BPF_EVENTS is not supported. Thus, no tests
involving BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT,
BPF_PROG_TYPE_KPROBE and BPF_PROG_TYPE_RAW_TRACEPOINT passes.
The implementation does not support "far branching" (>4KiB).
Test results:
# modprobe test_bpf
test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier
...
Summary: 761 PASSED, 507 SKIPPED, 2 FAILED
Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
0
No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
59
The two failing test_verifier tests are:
"ld_abs: vlan + abs, test 1"
"ld_abs: jump around ld_abs"
This is due to that "far branching" involved in those tests.
All tests where done on QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106). I'll test it on real hardware, when I get
access to it.
I'm routing this patch via bpf-next/netdev mailing list (after a
conversation with Palmer at FOSDEM), mainly because the other JITs
went that path.
Again, thanks for all the comments!
Cheers,
Björn
v1 -> v2:
* Added JMP32 support. (Daniel)
* Add RISC-V to Documentation/sysctl/net.txt. (Daniel)
* Fixed seen_call() asymmetry. (Daniel)
* Fixed broken bpf_flush_icache() range. (Daniel)
* Added alignment annotations to some selftests.
RFCv1 -> v1:
* Cleaned up the Kconfig and net/Makefile. (Christoph)
* Removed the entry-stub and squashed the build/config changes to be
part of the JIT implementation. (Christoph)
* Simplified the register tracking code. (Daniel)
* Removed unused macros. (Daniel)
* Added myself as maintainer and updated documentation. (Daniel)
* Removed HAVE_EFFICIENT_UNALIGNED_ACCESS. (Christoph, Palmer)
* Added tail-calls and cleaned up the code.
====================
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Update Documentation/networking/filter.txt and
Documentation/sysctl/net.txt to mention RISC-V.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
This commit adds a BPF JIT for RV64G.
The JIT is a two-pass JIT, and has a dynamic prolog/epilogue (similar
to the MIPS64 BPF JIT) instead of static ones (e.g. x86_64).
At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES, which means that CONFIG_BPF_EVENTS is not
supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT,
BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and
BPF_PROG_TYPE_RAW_TRACEPOINT passes.
The implementation does not support "far branching" (>4KiB).
Test results:
# modprobe test_bpf
test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier
...
Summary: 761 PASSED, 507 SKIPPED, 2 FAILED
Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
0
No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
59
The two failing test_verifier tests are:
"ld_abs: vlan + abs, test 1"
"ld_abs: jump around ld_abs"
This is due to that "far branching" involved in those tests.
All tests where done on QEMU (QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106)).
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Andrii Nakryiko says:
====================
This patch series adds BTF deduplication algorithm to libbpf. This algorithm
allows to take BTF type information containing duplicate per-compilation unit
information and reduce it to equivalent set of BTF types with no duplication without
loss of information. It also deduplicates strings and removes those strings that
are not referenced from any BTF type (and line information in .BTF.ext section,
if any).
Algorithm also resolves struct/union forward declarations into concrete BTF types
across multiple compilation units to facilitate better deduplication ratio. If
undesired, this resolution can be disabled through specifying corresponding options.
When applied to BTF data emitted by pahole's DWARF->BTF converter, it reduces
the overall size of .BTF section by about 65x, from about 112MB to 1.75MB, leaving
only 29247 out of initial 3073497 BTF type descriptors.
Algorithm with minor differences and preliminary results before FUNC/FUNC_PROTO
support is also described more verbosely at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
v1->v2:
- rebase on latest bpf-next
- err_log/elog -> pr_debug
- btf__dedup, btf__get_strings, btf__get_nr_types listed under 0.0.2 version
====================
Signed-off-by: Daniel Borkmann <[email protected]>
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
This patch implements BTF types deduplication algorithm. It allows to
greatly compress typical output of pahole's DWARF-to-BTF conversion or
LLVM's compilation output by detecting and collapsing identical types emitted in
isolation per compilation unit. Algorithm also resolves struct/union forward
declarations into concrete BTF types representing referenced struct/union. If
undesired, this resolution can be disabled through specifying corresponding options.
Algorithm itself and its application to Linux kernel's BTF types is
described in details at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
This pre-patch extracts calculation of amount of space taken by BTF type descriptor
for later reuse by btf_dedup functionality.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.
Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().
In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.
Tested-by: Andrew Lunn <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
With the recent print rework we now have the following problem:
pr_{warning,info,debug} expand to __pr which calls libbpf_print.
libbpf_print does va_start and calls __libbpf_pr with va_list argument.
In __base_pr we again do va_start. Because the next argument is a
va_list, we don't get correct pointer to the argument (and print noting
in my case, I don't know why it doesn't crash tbh).
Fix this by changing libbpf_print_fn_t signature to accept va_list and
remove unneeded calls to va_start in the existing users.
Alternatively, this can we solved by exporting __libbpf_pr and
changing __pr macro to (and killing libbpf_print):
{
if (__libbpf_pr)
__libbpf_pr(level, "libbpf: " fmt, ##__VA_ARGS__)
}
Signed-off-by: Stanislav Fomichev <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
