Currently user configured tx aggr size "0-64" is not honored in
firmware, By default firmware expects as 256 and its hardcoded.
In order to make user controllable, host has to send default max
tx aggr size as 256 for lithium and 64 for other targets.
Change-Id: I7a69f09d048f79da4c770e71b4d1c8726fa02faa
CRs-Fixed: 2846803
Currently for converting timestamp to string qdf_snprintf
function is used which may not print timestamp correctly.
Use qdf_snprint instead of qdf_snprintf to print correct
timestamp provided by fw.
Change-Id: I803f678dc38afc03131e589a820d129dc38380ce
CRs-Fixed: 2835199
Enable periodic time sync between host and fw by setting
gRemoveTimeStampSyncCmd to 0.
Change-Id: I52168ad6d065262c433c801716eec0d7782bf6e8
CRs-Fixed: 2845017
Currently in SAP and STA mode the driver advertises TWT
capabilities in the HE capabilities IE based on the below ini
values irrespective of the master ini "enable_twt" to enable
the twt feature:
"he_twt_requestor","he_twt_responder", "he_bcast_twt",
"he_flex_twt_sched".
So even with the ini is disabled, twt capabilities are advertised
Advertise TWT capability only if "enable_twt" ini is true.
Change-Id: Iae3a98ee339f3859391e0deb64ddd354634b0cbf
CRs-Fixed: 2844516
In AP side power off/on case, AP security has been cleanup.
The STA side might still cache PMK ID in driver and it will always
use PMK cache to connect to AP and get continuously connect failure
in SAE security. This function is to detect AP off based on FW
reported BMISS event. Meanwhile judge FW reported last RSSI > roaming
Low rssi and not less than 20db of host cached RSSI to avoid
some false alarm such as normal DUT roll in/out roaming.
Change-Id: I5d8ec9e9d4f8a44178b113d370799fe2bc0373fb
CRs-Fixed: 2841481
Enable 10th bit of CFG_BTM_ENABLE ini to forward BTM request
frame to upper layers when frame contains MBO assoc retry
attribute. when supplicant receives this MBO frame it will
use the frame info for blacklisting the AP so for the next
connection framework will avoid this AP.
Change-Id: I9a675cc01769c38ad5be26ea5fd28ada8dc03546
CRs-Fixed: 2843323
FW considers 9th bit of CFG_BTM_ENABLE for btm query
with candidate list which is not mentioned in ini
documentation.
Change-Id: I4fefdaa464e14c350d885107a28051fa0ad309f0
CRs-Fixed: 2839587
There are cases where only a few TWT roles may be required
to be enabled. For example TWT Requestor role alone or
TWT Respondor role alone. Also, it could be unicast TWT only
and disable broadcast TWT.
Support broadcast TWT configuration in requestor and responder
role by adding new INI.
Extend the use of existing requestor and responder INIs to further
enable requestor and responder roles itself.
Change-Id: I3dfa196edfda9cafd01fa56c0bb6ce73e27b4144
CRs-Fixed: 2828718
Currently when Adaptive 11R feature is disable via ini
then user space parse Vendor Specific IE and trigger
connection in FT-PSK/EAP based on STA configured key
mgmt, but due to feature disabled via ini it failed
to connect AP and trigger Assoc reject to user space.
To overcome this advertise Adaptive 11R supported feature
bit to user space and based on this feature bit user space
parse, trigger connection in FT-PSK/EAP other wise fallback to
PSK/EAP.
Change-Id: I5d67a0cb77c3f39328467a6313a7a795e6a7a4d8
CRs-Fixed: 2785878
To avoid roaming enable failed for operations bitmap set/clear mismatch for
SAP+STA or STA+STA concurrency, clear whole operations bitmap when RSO
deinit, then roaming can be enabled again after STA disconnect and
reconnect.
Add log when set/get operations bitmap to help debug.
Change-Id: Ie1f1a213dcdefb393ec3e1e2c6a8a71ab17b226c
CRs-Fixed: 2834199
Currently, host decrements beacon switch count and sends
channel switch frame every time until count becomes 0 this
may introduce sync issue between fw and host in case fw has
not sent beacons but host decremented switch count due to
timeout and sent new channel switch frame or vdev restart in
case count beacomes 0.
Fix is to offload CSA to fw to avoid any sync issue.
Change-Id: Idb48d419ec4117ff39cb823ca8af75d7a0abc3c0
CRs-Fixed: 2828045
Firmware sends peer create confirmation to detect duplicate peer
on other vdev. If the status field in the
wmi_peer_create_conf_event_fixed_param is 0, peer creation is
successful.
Add support to handle the peer create confirmation command for
sta mode. For roaming scenario, the peer will be internally
created by the firmware, so bail out after creating object
manager peer/datapath peer without sending the peer create
command similar as the current implementation.
For SAP/P2P Go mode the legacy peer create path will be used.
Proceed to do post linkstate change if status is success, else
do vdev stop and indicate failure to upper layers
Change-Id: I0abbd70dd509f2b9afa8d4d7db1774e289d1e021
CRs-Fixed: 2747870
Add new ini "monitor_mode_concurrency" to support this feature
and introduce policy manager api's for concurrency checks.
Change-Id: I35ee1fece0a6f9ae8fe340b0598c4a3e20b17e82
CRs-Fixed: 2814523
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps to debug the scenario when roam failure happen.
Print the info received related to roam scan type & roam status
info into kmsg.
Change-Id: Idd688eb4d1e699573fa1e243873c30ffdc5bf96f
CRs-Fixed: 2794555
Move ini CFG_VENDOR_ROAM_SCORE_ALGORITHM from qcacld-3.0 to qcacmn part.
from qcacld-3.0: mac_ctx->mlme_cfg->roam_scoring
to qcacmn: mlme_psoc_obj->psoc_cfg.score_config.
Change-Id: I318f0d516ce699c061f268116e1cbf79fcc9e23a
CRs-Fixed: 2806090
Memory is created for the mlme legacy pointer during the create
of the mlme legacy priv object. This allocated memory doesn't get
free when an error condition which leads to device crash.
To avoid this problem memory should be freed before returning from
the error condition.
Change-Id: I8aaaf7bf17cf38f70135e5ff00db429c34aff2d8
CRs-Fixed: 2803896
Currently, QCA_SETBAND_AUTO is backwards compatible, so it is set
to include only 2G and 5G bands. Update this to include 6G bands
as well. Also update the band capability INI to have the default
value 0 include 6G bands.
Change-Id: I98067c18e939ff4c1e7b1e778b020b44409b5b34
CRs-fixed: 2799883
Host is not enabling WTC_BTM roam trigger via
roam_enable trigger command
(WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID). Because
of this roam scan is not triggered and BTM response is
not sent to AP.
Fix is to enable WTC BTM by default
Change-Id: Ie33f8a298818955c886094d6f703b9603ab5b00e
CRs-Fixed: 2795665
Change the default value of in CFG_REPORT_MAX_LINK_SPEED
to CFG_STATS_LINK_SPEED_REPORT_ACTUAL instead of
CFG_STATS_LINK_SPEED_REPORT_MAX_SCALED so that
gReportMaxLinkSpeed uses the default value as zero which
was previously 2.
Change-Id: I459c807b1738e21a28c5b51e2eeb6a4bccb78662
CRs-Fixed: 2787888
Add support to handle the nl80211 attribute -
QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME. Send RSO update to
firmware if roam scan scheme value is received via the nl80211
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME over the
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD subcommand.
Change-Id: If21281245097648380990b9218a722691279f598
CRs-Fixed: 2785256
User sends wfa test configs to host using vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Host parses the
vendor command and sends wfa test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID
Change-Id: I5aa0bc8b0a0064828b48368e47d53a5ad5e7ff2f
CRs-Fixed: 2772013
Use uint32 variable to populate he_mcs_12_13_supp from ini
he_mcs_12_13_support.
Previously, uint16 variable was used which was populating
he_mcs_12_13_supp_2g correctly but was disabling
he_mcs_12_13_supp_5g.
Change-Id: I28cd2060799a9f46f79860bdf9a3ede1574c9112
CRs-Fixed: 2789303
At present, WAPI security mode STA is not allowed to run in
concurerncy with any other vdev.
So, whenever a new vdev is created, policy_mgr_check_privacy_for_new_conn
is called to check the security concurrency of new connection by checking
security of exisitng vdevs and if a STA vdev with WAPI security exists
then the concurrency is not allowed and the api will return false.
In case, while performing this check, the adaptor associated with
the existing vdev is destroyed, there might be a crash as
hdd_wapi_security_sta_exist is still trying to access the security
of that vdev.
To solve this, use wlan_objmgr_pdev_iterate_obj_list with crypto info
to iterate across all the existing vdev and check the security. If
Wapi security STA exists, it will return an argument with value as true
which will be used in policy_mgr_check_privacy_for_new_conn and it will
return false as concurrency is not allowed
Change-Id: Iff811d2406f1c74cec26d457a2a682dd992710b8
CRs-Fixed: 2784406
When vdev is null in both mlme_get_roam_state() and
mlme_is_roam_invoke_in_progress(), error log is getting printed
redundantly.
Remove prints from both function as there is no additional info.
Change-Id: Ibc96ad957d947857777dad9df9ff766e68562dae
CRs-Fixed: 2785775
In OWE transition mode, the AP advertises one Hidden SSID and one
normal ssid and the OWE capable STA connects to the OWE supported
hidden SSID. When connecting to the hidden SSID, if the AP sends
beacon for the unicast probe request sent by driver before
anouncing join success, then the beacon NULL ssid gets updated to
the kernel. Then after successful association, while indicating
the connection successs to the kernel, the current bss is not
filled as wlan_cfg80211_get_bss() is called with the actual ssid
and not the NULL ssid.
Due to this when supplicant sends install key command for this
bss, kernel returns error and set_key always fails.
Wait for the probe response from the AP for the unicast probe
request sent before announcing join success and drop the beacon
received from the AP so that the driver
fills the proper ssid to the kernel bss entry and same ssid gets
used in association completion handler.
Change-Id: Icded0af5d45d3281ab4304bf166bdc318aa7a942
CRs-Fixed: 2782618
qdf_mem_malloc() function already takes care of logging the
caller function name and line number in case of any allocation error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: If0b9425f82f9ed793c7639c0ed09eb1f868b6d5c
CRs-Fixed: 2781932
For STA+P2P GO case, DUT sets operational rates when connecting to AP
as STA, and overwrites it when DUT forming P2P connection as P2P GO.
So, add this change to save operational rates to vdev mlme legacy
object, and avoid to overwrite for other inferfaces.
Change-Id: I2bfbecbc9bc50b8943b1e3de516782e70b125ce2
CRs-Fixed: 2773943
Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.
Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230
Reduce default value of gMaxLIModulatedDTIM from 10 to 5
to shorten the listen interval. It provides better
connectivity when AP has a large DTIM Period or
Beacon Interval.
Also, move the ini definition to sta header file from
sap header file.
Change-Id: I9661c6fc623949cf8b260043e8da7448b496d57f
CRs-Fixed: 2780070
While initial connection with SPMK AP1 supplicant generates
PMK1, and DUT updates global mlme single pmk entry and
csr session pmk.
Now DUT roam to non-SPMK AP2 and generates PMK2, Global mlme
single pmk has SPMK AP1 PMK1 and csr_roam_session has non-SPMK
AP2 since FULL SAE happen.
Now Roam back to SPMK AP1, since the Full SAE does not happen
and due to check roam_synch_data->authStatus ==
CSR_ROAM_AUTH_STATUS_AUTHENTICATED in
csr_process_roam_synch_callback(). The lookup and update
csr_roam_session code is not hit and driver don’t update
csr session pmk after roaming to SPMK AP. So after roam sync complete,
csr_check_and_set_sae_single_pmk_cap() updates the global mlme
single pmk with session->psk_pmk. This results DUT uses PMK generated
from a Non-Single PMK supported AP in the ReAssoc Request frame
while Roaming to Single PMK supported AP.
Fix is to allow driver to update session->psk_pmk even in case
Full SAE does not happen.
Change-Id: Ie4f06cfcb066ae245de024b62da586aade783aec
CRs-Fixed: 2761771
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
Pass rx data rssi triggers and rx time to firmware.
Add log in wmi to narrow down host and firmware issue.
Change-Id: I255e02ab8f2c88a29619a49d9c2055bdaa75642a
CRs-Fixed: 2768053
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
Change-Id: Id8c420950bb8c1d11db5a26aa860e280bcb672d1
CRs-Fixed: 2769372
Add checks in caller APIs to handle negative return value from
crypto get param and crypto get peer param APIs.
Change-Id: Ibb138971f347c7ccdacbc93aa38521d5d9536759
CRs-Fixed: 2775328
Currently, the APIs related to setting the preferred channel list is
in the SME module. Move these APIs to the policy manager so they can
be accessed from non-legacy modules.
Change-Id: Icc487dd2a0014e59db9c2df729b875f58e3e975e
CRs-fixed: 2766863
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Set default value of INI enable_subfee_vendor_vhtie to 1
to enable SU Bformee in vendor VHTIE by default.
Change-Id: I8a916495dd5c6ddfe78840dc6f35976fbdbbf8ba
CRs-Fixed: 2769257
This is a change for typo about LFR configuration. It uses ini -
"mawc_roam_ap_rssi_threshold", the correct is
"mawc_roam_rssi_high_adjust".
Change-Id: I7e29287b84559f58f13d191d6288534196b894da
CRs-Fixed: 2768752
Currently INI: gFirstScanBucketThreshold is not used
while LFR2/LFR3 roaming.
Remove unused INI gFirstScanBucketThreshold
Change-Id: Ifa909fc57d3ac3da696369fcffc390826f393b44
CRs-Fixed: 2767372
