Do not configure legacy rate to FW if it is HE connection, otherwise
FW does not work.
Change-Id: I31d167ee79b7b58cabad29e65cf6834a7151093d
CRs-Fixed: 2472811
The old change I7e5a21601642e0d6afef73beeecf80a3e0475909
is missing when new scan mgr introduced, re-design the
change.
If DFS AP present, station scan 5g chanlist should be
avoided if target doesn't support Agile DFS Scan in Single
MAC mode. And also if current hw mode is DBS, the 5g chan
scan is not allowed as well.
1) if agile & DFS scans are supported
2) if hardware is DBS capable
3) if current hw mode is non-dbs
If all above 3 conditions are true then don't skip any
channel from scan list.
Change-Id: I3773c1c63ea3f33db6f6ee2c31cb5d09d3c2ae71
CRs-Fixed: 2471542
Driver will reject with channel 0 when check channel ok for DNBS,
without this fix, wlan_cfg80211_mgmt_tx API will fail when channel is zero.
Change-Id: I89edc81c45104d0994cd65262c1f5545f0f6970f
CRs-Fixed: 2476420
Add ini support for FIPS 4-way hanshake offload to firmware. FIPS
offload feature will add support to handle LFR 3.0 connection only
(auth/reassoc). If this ini is set then firmware will offload
4-way HS to supplicant. In the Roam sync indication firmware will
inform connected and not authenticated so that supplicant can take
care of 4-way HS.
Change-Id: I3da58910218ffc57094cac4c3cab4572631d9404
CRs-Fixed: 2459182
In P2P GO mode, if the P2P client device is not VHT capable and
only HT capable, but the DUT P2P GO is VHT capable and advertises
2x2 NSS and sends packets with 2x2 rates, it results in interop
issues with HT only capable P2P client devices.
When GO is operating in DBS mode, GO beacons advertise 2x2
capability but include OMN IE to indicate current operating mode
of 1x1. But here peer device is only HT capable and will not
understand OMN IE.
Check if the P2P client device is only HT capable and has
"\x00\x50\xf2\x04". Then downgrade the P2P GO operation to 1x1
nss. Modify rx mcs map value in association response to enable
only mcs 0-7.
Change-Id: I7177c5aee9a560a20c50a63886c0ee77f7d617ae
CRs-Fixed: 2464925
Firmware expects btm_offload_config value as 0x1c1 by default
so that BTM query is enabled. To enable BIT 7, "prefer_btm_query"
ini is used and its default value is 1. To enable BIT 8 in
btm_offload_config, "prefer_roam_score_for_candidate_selection"
ini is used and its default value is 1. Enable the BIT 6 also
by default.
Change the default value of btm_offload_config to set bit 6 by
default.
Change-Id: Ic0b222c281d1731aaf21aaff6a72ebf1f1f930de
CRs-Fixed: 2466687
Since system is awake when runtime PM suspend/resume happens, there is
no need to send DTIM related WMI commands with WOW sequence during runtime
PM resume as unlike system suspend, these commands are able to be sent from
other paths. It will just trigger runtime PM resume which is expected
behavior.
Change-Id: I51d0f45c0223a0c0e3c61bbcb7135a590359b08d
CRs-Fixed: 2475111
In function tdls_ct_idle_handler, idx is assigned from
tdls_info->index which can be 0 254. But tdls_conn_info
is static array in tdls_soc_priv_obj of size
WLAN_TDLS_STA_MAX_NUM (8). So check idx is less than
WLAN_TDLS_STA_MAX_NUM or not to avoid OOB memory access.
Change-Id: I8387cb0a44a79f0f83b25c12de2aa9fbc39ab2f3
CRs-Fixed: 2474432
Currently the driver checks that DBS for connection
is allowed or not, and on that basis rejects the scan,
but it may happen that FW supports DBS, and DBS for
scan is enabled in the ini, but the DBS for connection
is disabled.
In that case the diver opts for non-dbs scan.
Fix is to allow DBS scan in case of DBS scan enabled in ini.
Change-Id: I9feccdb434787f9ae1b87397b9c7a25cb2e40705
CRs-Fixed: 2473835
During resource unloading, if two next to next client connect
request comes, one is handled in pending event handler in
wlan_ipa_uc_op_cb callback after processing FW TX suspend response
and other one is handled in scheduler thread, this causes race
condition in sending IPA offload enable for STA iface. So send IPA
enable req to FW before queuing the client connect event to the
pending events.
Change-Id: Ifcabc2481e590e5e128434614c4b46fe53a34636
CRs-Fixed: 2460573
In the API blm_update_ap_info, it may happen that the scan
entry is NULL, and the scan entry pointer maybe dereferenced
in the debug print where the rssi print is there.
Fix is to print the RSSI only when the scan entry is valid.
Change-Id: I3ad973d61a0c11b6a55c8b346d54eb41956882b6
CRs-Fixed: 2469815
In ndi_remove_and_update_primary_connection() of NAN component,
add missing NULL checks for psoc and vdev NAN private objects
to avoid possible NULL dereference.
Change-Id: Iff3e248259ab67628d081d30f16d1822a0ea6dcb
CRs-Fixed: 2423991
Set the max_station config correctly at wma_open instead of using
the default value.
Change-Id: I63cd05462351359fbdcaae03dbdff940817b9bde
CRs-Fixed: 2468829
Since system is awake when runtime PM suspend/resume happens, there is
no need to send DTIM related WMI commands with WOW sequence as unlike
system suspend, these commands are able to be sent from other paths. It
will just trigger runtime PM resume.
Change-Id: I5bc6b5e363e90c77a2d615129fbac69fc80366ea
CRs-fixed: 2469483
Update the bad bssid reset time in Ms, and compare with the
connection age to remove the BSSID with which the nud fail
has not happened till the mentioned bad bssid reset time.
Change-Id: I6ba58d5e8a110b4c83d5c83e3cec6c832a24094b
CRs-Fixed: 2469969
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: I0bd9248122b4f49274ee05a225ce6f880fede0cb
CRs-Fixed: 2468414
Remove the BSSID entry from the blacklist manager reject ap list
when the bad bssid counter gets over.
Change-Id: I833d161d97afd5c13a23ae48b1aded38d55b25e4
CRs-Fixed: 2468236
Update 2x2 dbs PCL table and DBS action tables
to support P2P GO + P2P GO + STA concurrency cases.
Change-Id: I87b77c64083f7e398fcec9f4efc60a887e18e7ef
CRs-Fixed: 2464109
Host failed to send legacy d0wow disable command due to failure
in target suspend flag check during resume.
Update target suspend flag in legacy d0wow enable.
Change-Id: I497c46b90a8fb5deb78ce31fb6e5b0d2c76d723d
CRs-Fixed: 2460452
Set BSSID state as disconnected when roaming is successful
so that blacklist manager can clear the AP info if the
nud failure did not come for blacklist reset time value.
Change-Id: Ie602c02d7a43b46daa7f1b1f85cd98628da91280
CRs-Fixed: 2467319
Set remaining duration of BSSID according to type of
list it is in. For eg. the remaning duration of avoid
list type would be the avoid list timer value minus the
time for which it is in blacklist manager's reject
ap list.
Change-Id: I0f9ed9e04ab6a5fbdc79521b20f0afd8f8028855
CRs-Fixed: 2466191
Clear the userspace blacklist info when a new
command for set blacklist BSSID comes to the driver
even if the userspace sends zero BSSIDs.
Change-Id: Ic2e310359d8e83c0821a0c4c8fedd90e81998627
CRs-Fixed: 2464948
Fill the reject ap type as the one requested by the user
in the reject ap list.
Change-Id: Ie26180293e4b0c5c212ebcd31a15fd93f9150f8e
CRs-Fixed: 2464748
In function mlme_init_vht_cap_cfg(), initialization of
CFG_VHT_SU_BEAMFORMEE_CAP is done using the cfg_default() api,
which always returns the default value irrespective of the
ini configured.
Use cfg_get() api to get the default value of ini items.
cfg_get() api use gTxBFEnable ini for SU beamforce caps
Change-Id: I17062548931b5032dfdd56652ddaef2b96c8864e
CRs-Fixed: 2462350
It won't send mgmt frame with NULL channel information currently,
which is different to other branches. Add this change because up layer
pass NULL channel information when tx mgmt frame in some platform.
Change-Id: I689d64789187fe0df03ed57ef0ff10c5157aeeb6
CRs-Fixed: 2459485
Currently with the support of Blacklist manager
component, all the blacklist, avoid list, RSSI-REJECT
list is maintained by the BLM, hence the filter logic
of the blacklist APs in the scan component is not
required.
Cleanup the blacklist BSSID APIs, and related functionality.
Change-Id: I4c8283d2c5e4ca66c24a25d31a74026510bb452c
CRs-Fixed: 2464188
CFG_VALID_CHANNEL_LIST_STRING_LEN as array size passed to
qdf_uint8_array_parse, which is more big than array size. So pass the
actual size - CFG_VALID_CHANNEL_LIST_LEN to that function.
Change-Id: I7596c0887147523570450dbac4dba2d03e7fe8b6
CRs-Fixed: 2462613
As part of start_ap or connect_start to teardown active tdls peers
hdd_notify_teardown_tdls_links is called with argument vdev. But
TDLS might not be enabled on that vdev. With recent changes,
osif_priv object is initialized as part of tdls_vdev_init.
For the new interface if TDLS is not initialized then osif_priv
object will not be found and TDLS peers are not removed.
Change-Id: Idcf690bba2766664700a4851d390ee620f2fe73a
CRs-Fixed: 2460108
Add support for roaming in case the driver
detects a nud failure. The STA then would roam
to another BSSID, else if the roaming gets failed
the STA would remain connected to the same BSSID
as connected before.
Change-Id: Idbc99b0ce2f9cacd97564dd8cf9892120958eda2
CRs-Fixed: 2461675
Link BLM exposed APIs to the following:-
1. csr_get_scan_result:- Link this API with filter bssids in
the reject ap list maintained by the blacklist mgr.
2. lim_assoc_rej_add_to_rssi_based_reject_list:- Link this API
with the the blacklist mgr add bssid to reject list to add the
OCE and BTM related assoc rejects.
3. Userspace avoid list parsing logic for the userspace to set
the BSSID as avoided.
Change-Id: Id51ffb80cea3f845fefe14db25d0f7acda6ea0f3
CRs-Fixed: 2461281
When BTM config is disabled in the supplicant, the BSS
transition bit (19) of the extended capabilities will be
disabled. If BTM offload is enabled, currently driver still
advertises that the BSS transition bit(19) as disabled. This
results in AP disabling 11v for this STA.
Advertise the BSS transition bit (19) as enabled in the extended
capabilities if btm_offload ini bit 1 is enabled.
Change-Id: I7c1977294a2e166321951ee0ec31f18929c42176
CRs-Fixed: 2455919
Function mlme_get_dynamic_oce_flags can return the NULL value.
Avoid and check for NULL pointer in the callers.
Change-Id: Idc83a9e5dea812a73fed24de3aa2c2c49436f7d1
CRs-Fixed: 2462716
Reject AP list which is maintained by the blacklist manager
has to be sent to the FW for roaming case scenarios, as
the blacklist, and rssi reject APs should not be preferred
in the reassociation.
Change-Id: I58bf90e17653dde2a5042780ba7d57fa3115d63a
CRs-Fixed: 2461230
Add logic to add a bssid in the reject AP list maintained
by the blacklist manager. The logic includes addition of
userspace blacklist, avoid list, RSSI reject list,
and not deletion of lowest delta BSSID if the space in the
reject ap list is full.
Change-Id: I0c359f510510582099059fbb9cc098f5a3f91c1b
CRs-Fixed: 2460795
Add logic to filter the bad BSSIDs present in the scan list
with the BSSIDs present in the blacklist manager's reject ap
list.
Change-Id: I3a19be753b64387e251e3a9bc740865bf80251a8
CRs-Fixed: 2460788
BLM:- Blacklist Manager
Add the basic infrastructure such as target-if, tgt, init,
deinit, ini files, core and main files for the new component
Blacklist Manager.
Change-Id: I624a779ee0dd6be7cb26a911af0aefd426ca9bff
CRs-Fixed: 2460602
In the target_if layer based on the mc address list count the
filter params are filled and sent to the firmware. If the mc address
list passed is more than the maximum supported address list there
can be possible buffer overflow.
Sanitize the mc address list count to avoid any overflow.
CRs-Fixed: 2452131
Change-Id: I03208a5487cfd730e933666c47accb2e46fbbc72
In order to ensure that HT40 is enabled by default on 2.4 GHz
remove gChannelBondingMode24GHz entry from INI file and set
the default value of gChannelBondingMode24GHz to 1.
Change-Id: I8b7657e3eef5f4ec19863c8da6a611a63ccecd9c
CRs-Fixed: 2461593
Few IOT APs advertise reduced NSS capabilities on ending
up in bad state. These APs can later recover to support
the actual NSS capabilities. In this scenario, when STA
initiates connection to these APs, which are in bad state,
reduced NSS capabilities is advertised. STA cannot later
upgrade NSS capabilities to the minimum of STA max NSS
capability and APs actual NSS capability, once AP recovers.
Fix is to advertise max NSS capability during connection
with these IOT APs based on vendor OUIs and downgrade if
AP still advertises reduced NSS capability in association
response.
Change-Id: I49ea13534b1a44fd9ffadd1e8fb44e9d782147c4
CRs-Fixed: 2453938
In function mlme_init_btm_cfg(), initializing the
btm_solicited_timeout, btm_max_attempt_cnt and btm_sticky_time
is done using the cfg_default() api, which always returns the
default value irrespective of the ini configured. This results
in failure of ini configuration from the WCNSS_qcom_cfg.ini file.
Use cfg_get() api to get the default value of ini items.
Change-Id: I773676cc67878f233cb6d14e0ad3ec1d79a5518f
CRs-Fixed: 2461612
Fix an issue where driver downgrades HW to single MAC mode for
NAN + NDI concurrency. DBS must be enabled for since NAN operates
in 2G.
Change-Id: Ie4d76e7a73d40ce663c6f907693954b62add0394
CRs-fixed: 2460830
Abstract the callback hdd_softap_ipa_start_xmit by
hdd_softap_ipa_start_xmit, to match the return type of
wlan_ipa_softap_xmit pointer, to fix a CFI failure.
Change-Id: If1cb1a80801558d5c7831ec89ad5281b0bbe36f3
A VHT beamformee shall indicate the maximum number of space-time
streams it can receive in a VHT NDP in the Beamformee STS
Capability subfield of the VHT Capabilities Information field of
the VHT Capabilities element. The SAP is advertising STS value
as 8 in both 2G and 5G band. This may cause IOT issues.
Fix the default value of beamformee STS capability value as
default value 3 for SAP.
Change-Id: I026eabeea941a33f1ffab6e498e6de90e182320e
CRs-Fixed: 2448390
