[ Upstream commit d4736737110ffa83d29f1c5d17b26113864205f6 ]
When sending llc packets with vlan tx offload, the hardware fails to
actually add the tag. Deal with this by fixing it up in software.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Reported-by: Thibaut VARENE <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a556f06338e1d5a85af0e32ecb46e365547f92b9 ]
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a7 ("i40e: Add support for client interface for IWARP driver")
Signed-off-by: Zhen Ni <[email protected]>
Reviewed-by: Paul Menzel <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c6dd1aa2cbb72b33e0569f3e71d95792beab5042 ]
The icmp_ndo_send function was originally introduced to ensure proper
rate limiting when icmp_send is called by a network device driver,
where the packet's source address may have already been transformed
by SNAT.
However, the original implementation only considers the
IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's
source address with that of the original-direction tuple. This causes
two problems:
1. For SNAT:
Reply-direction packets were incorrectly translated using the source
address of the CT original direction, even though no translation is
required.
2. For DNAT:
Reply-direction packets were not handled at all. In DNAT, the original
direction's destination is translated. Therefore, in the reply
direction the source address must be set to the reply-direction
source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple
for source address translation, and adjust the pre-checks to handle
reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids
possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Fabian Bläse <[email protected]>
Cc: Jason A. Donenfeld <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0704a3da7ce50f972e898bbda88d2692a22922d9 ]
dsp_hwec_enable() allocates dup pointer by kstrdup(arg),
but then it updates dup variable by strsep(&dup, ",").
As a result when it calls kfree(dup), the dup variable may be
a modified pointer that no longer points to the original allocated
memory, causing a memory leak.
The issue is the same pattern as fixed in commit c6a502c22999
("mISDN: Fix memory leak in dsp_pipeline_build()").
Fixes: 9a43816182 ("mISDN: Remove VLAs")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b79e498080b170fd94fc83bca2471f450811549b ]
The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as
the register address to GetByte(), instead of fetching the register
value and OR-ing it with FullDuplex. This results in an invalid
register access.
Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex
before writing it back.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Alok Tiwari <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 54416fd76770bd04fc3c501810e8d673550bab26 ]
The helper registration return value is passed-through by module_init
callbacks which modprobe confuses with the harmless -EEXIST returned
when trying to load an already loaded module.
Make sure modprobe fails so users notice their helper has not been
registered and won't work.
Suggested-by: Christophe Leroy <[email protected]>
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Phil Sutter <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
When building powerpc configurations in linux-5.4.y with binutils 2.43
or newer, there is an assembler error in arch/powerpc/boot/util.S:
arch/powerpc/boot/util.S: Assembler messages:
arch/powerpc/boot/util.S:44: Error: junk at end of line, first unrecognized character is `0'
arch/powerpc/boot/util.S:49: Error: syntax error; found `b', expected `,'
arch/powerpc/boot/util.S:49: Error: junk at end of line: `b'
binutils 2.43 contains stricter parsing of certain labels [1], namely
that leading zeros are no longer allowed. The GNU assembler
documentation already somewhat forbade this construct:
To define a local label, write a label of the form 'N:' (where N
represents any non-negative integer).
Eliminate the leading zero in the label to fix the syntax error. This is
only needed in linux-5.4.y because commit 8b14e1dff067 ("powerpc: Remove
support for PowerPC 601") removed this code altogether in 5.10.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=226749d5a6ff0d5c607d6428d6c81e1e7e7a994b [1]
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
This reverts commit 2402adce8d which is
commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f upstream.
The upstream commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f ("drm/dp:
Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS") the
reverted commit backported causes a regression, on one eDP panel at
least resulting in display flickering, described in detail at the Link:
below. The issue fixed by the upstream commit will need a different
solution, revert the backport for now.
Cc: [email protected]
Cc: [email protected]
Cc: Sasha Levin <[email protected]>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14558
Signed-off-by: Imre Deak <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ac4ed2da4c1305a1a002415058aa7deaf49ffe3e upstream.
This reverts commit b08425fa77ad2f305fe57a33dceb456be03b653f.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit be33e8a239aac204d7e9e673c4220ef244eb1ba3)
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 185c926283da67a72df20a63a5046b3b4631b7d9 upstream.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
Signed-off-by: Minjong Kim <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit a6358f8cf64850f3f27857b8ed8c1b08cfc4685c ]
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383 ("efivarfs: guid part of filenames are case-insensitive")
Signed-off-by: Li Nan <[email protected]>
Signed-off-by: Wu Guanghao <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4f23382841e67174211271a454811dd17c0ef3c5 ]
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <[email protected]>
Reviewed-by: Matthew Gerlach <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit aca0c31af61e0d5cf1675a0cbd29460b95ae693c ]
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Dragos Tatulea <[email protected]>
Signed-off-by: Mark Bloch <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d24341740fe48add8a227a753e68b6eedf4b385a ]
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Mark Bloch <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ceddedc969f0532b7c62ca971ee50d519d2bc0cb ]
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Mark Bloch <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 007a5ffadc4fd51739527f1503b7cf048f31c413 ]
`McstFramesRcvdOk` counts the number of received multicast packets, and
it reports the value correctly.
However, reading `McstFramesRcvdOk` clears the register to zero. As a
result, the driver was reporting only the packets since the last read,
instead of the accumulated total.
Fix this by updating the multicast statistics accumulatively instaed of
instantaneously.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a06d30ae7af492497ffbca6abf1621d508b8fcaa ]
All implementations of these two methods are dummies that always
return -EINVAL.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Stable-dep-of: ec79003c5f9d ("atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().")
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 15bf2c6391bafb14a3020d06ec0761bce0803463 ]
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f428091858 ("Bluetooth: Simplify num_comp_pkts_evt function")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 88688a2c8ac6c8036d983ad8b34ce191c46a10aa ]
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Fixes: cbe487fac7 ("KVM: PPC: Add mtsrin PV code")
Tested-by: Venkat Rao Bagalkote <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5189446ba995556eaa3755a6e875bc06675b88bd ]
Commit 9e30ecf23b1b ("net: ipv4: fix incorrect MTU in broadcast routes")
introduced a regression where local-broadcast packets would have their
gateway set in __mkroute_output, which was caused by fi = NULL being
removed.
Fix this by resetting the fib_info for local-broadcast packets. This
preserves the intended changes for directed-broadcast packets.
Cc: [email protected]
Fixes: 9e30ecf23b1b ("net: ipv4: fix incorrect MTU in broadcast routes")
Reported-by: Brett A C Sheffield <[email protected]>
Closes: https://lore.kernel.org/regressions/[email protected]
Signed-off-by: Oscar Maes <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
commit dd54bcf86c91a4455b1f95cbc8e9ac91205f3193 upstream.
When operating on struct vhost_net_ubuf_ref, the following execution
sequence is theoretically possible:
CPU0 is finalizing DMA operation CPU1 is doing VHOST_NET_SET_BACKEND
// ubufs->refcount == 2
vhost_net_ubuf_put() vhost_net_ubuf_put_wait_and_free(oldubufs)
vhost_net_ubuf_put_and_wait()
vhost_net_ubuf_put()
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 1
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 0
wait_event(ubufs->wait, !atomic_read(&ubufs->refcount));
// no wait occurs here because condition is already true
kfree(ubufs);
if (unlikely(!r))
wake_up(&ubufs->wait); // use-after-free
This leads to use-after-free on ubufs access. This happens because CPU1
skips waiting for wake_up() when refcount is already zero.
To prevent that use a read-side RCU critical section in vhost_net_ubuf_put(),
as suggested by Hillf Danton. For this lock to take effect, free ubufs with
kfree_rcu().
Cc: [email protected]
Fixes: 0ad8b480d6 ("vhost: fix ref cnt checking deadlock")
Reported-by: Andrey Ryabinin <[email protected]>
Suggested-by: Hillf Danton <[email protected]>
Signed-off-by: Nikolay Kuratov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit a2f54ff15c3bdc0132e20aae041607e2320dbd73 ]
The SCSI sysfs attributes "supported_mode" and "active_mode" do not
define a store method and thus cannot be modified. Correct the
DEVICE_ATTR() call for these two attributes to not include S_IWUSR to
allow write access as they are read-only.
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Johannes Thumshin <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4013aef2ced9b756a410f50d12df9ebe6a883e4a ]
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/[email protected]
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a12946bef0407cf2db0899c83d42c47c00af3fbc ]
When building on ARCH=um (which does not set HAS_IOMEM), kconfig
reports an unmet dependency caused by PINCTRL_STMFX. It selects
MFD_STMFX, which depends on HAS_IOMEM. To stop this warning,
PINCTRL_STMFX should also depend on HAS_IOMEM.
kconfig warning:
WARNING: unmet direct dependencies detected for MFD_STMFX
Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y]
Selected by [y]:
- PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y]
Fixes: 1490d9f841 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1d3b4bec3ce55e0c46cdce7d0402dbd6b4af3a3d ]
First of all, tell it how many slots do we want, not which slot
is wanted. It makes one caller (dup_fd()) more straightforward
and doesn't harm another (expand_fdtable()).
Furthermore, make it return ERR_PTR() on failure rather than
returning NULL. Simplifies the callers.
Simplify the size calculation, while we are at it - note that we
always have slots_wanted greater than BITS_PER_LONG. What the
rules boil down to is
* use the smallest power of two large enough to give us
that many slots
* on 32bit skip 64 and 128 - the minimal capacity we want
there is 256 slots (i.e. 1Kb fd array).
* on 64bit don't skip anything, the minimal capacity is
128 - and we'll never be asked for 64 or less. 128 slots means
1Kb fd array, again.
* on 128bit, if that ever happens, don't skip anything -
we'll never be asked for 128 or less, so the fd array allocation
will be at least 2Kb.
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3868f910440c47cd5d158776be4ba4e2186beda7 ]
When kernel lockdown is active, debugfs_locked_down() blocks access to
hypfs files that register ioctl callbacks, even if the ioctl interface
is not required for a function. This unnecessarily breaks userspace
tools that only rely on read operations.
Resolve this by registering a minimal set of file operations during
lockdown, avoiding ioctl registration and preserving access for affected
tooling.
Note that this change restores hypfs functionality when lockdown is
active from early boot (e.g. via lockdown=integrity kernel parameter),
but does not apply to scenarios where lockdown is enabled dynamically
while Linux is running.
Tested-by: Mete Durlu <[email protected]>
Reviewed-by: Vasily Gorbik <[email protected]>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fec7bdfe7f8694a0c39e6c3ec026ff61ca1058b9 ]
Currently, hypfs registers ioctl callbacks for all debugfs files,
despite only one file requiring them. This leads to unintended exposure
of unused interfaces to user space and can trigger side effects such as
restricted access when kernel lockdown is enabled.
Restrict ioctl registration to only those files that implement ioctl
functionality to avoid interface clutter and unnecessary access
restrictions.
Tested-by: Mete Durlu <[email protected]>
Reviewed-by: Vasily Gorbik <[email protected]>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8410fe81093ff231e964891e215b624dabb734b0 ]
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 15de71d06a400f7fdc15bf377a2552b0ec437cf5 ]
The following setup can trigger a WARNING in htb_activate due to
the condition: !cl->leaf.q->q.qlen
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 \
htb rate 64bit
tc qdisc add dev lo parent 1:1 handle f: \
cake memlimit 1b
ping -I lo -f -c1 -s64 -W0.001 127.0.0.1
This is because the low memlimit leads to a low buffer_limit, which
causes packet dropping. However, cake_enqueue still returns
NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an
empty child qdisc. We should return NET_XMIT_CN when packets are
dropped from the same tin and flow.
I do not believe return value of NET_XMIT_CN is necessary for packet
drops in the case of ack filtering, as that is meant to optimize
performance, not to signal congestion.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: William Liu <[email protected]>
Reviewed-by: Savino Dicanosa <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Reviewed-by: Jamal Hadi Salim <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4d4d9ef9dfee877d494e5418f68a1016ef08cad6 ]
Resolve the budget negative overflow which leads to returning true in
ixgbe_xmit_zc even when the budget of descs are thoroughly consumed.
Before this patch, when the budget is decreased to zero and finishes
sending the last allowed desc in ixgbe_xmit_zc, it will always turn back
and enter into the while() statement to see if it should keep processing
packets, but in the meantime it unexpectedly decreases the value again to
'unsigned int (0--)', namely, UINT_MAX. Finally, the ixgbe_xmit_zc returns
true, showing 'we complete cleaning the budget'. That also means
'clean_complete = true' in ixgbe_poll.
The true theory behind this is if that budget number of descs are consumed,
it implies that we might have more descs to be done. So we should return
false in ixgbe_xmit_zc to tell napi poll to find another chance to start
polling to handle the rest of descs. On the contrary, returning true here
means job done and we know we finish all the possible descs this time and
we don't intend to start a new napi poll.
It is apparently against our expectations. Please also see how
ixgbe_clean_tx_irq() handles the problem: it uses do..while() statement
to make sure the budget can be decreased to zero at most and the negative
overflow never happens.
The patch adds 'likely' because we rarely would not hit the loop condition
since the standard budget is 256.
Fixes: 8221c5eba8 ("ixgbe: add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Larysa Zaremba <[email protected]>
Reviewed-by: Paul Menzel <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Tested-by: Priya Singh <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 84967deee9d9870b15bc4c3acb50f1d401807902 ]
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: Minhong He <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9dcf111dd3e7ed5fce82bb108e3a3fc001c07225 ]
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a1 ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Chris Leech <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
commit 2eb03376151bb8585caa23ed2673583107bb5193 upstream.
xHC controller may immediately reuse a slot_id after it's disabled,
giving it to a new enumerating device before the xhci driver freed
all resources related to the disabled device.
In such a scenario, device-A with slot_id equal to 1 is disconnecting
while device-B is enumerating, device-B will fail to enumerate in the
follow sequence.
1.[device-A] send disable slot command
2.[device-B] send enable slot command
3.[device-A] disable slot command completed and wakeup waiting thread
4.[device-B] enable slot command completed with slot_id equal to 1 and
wakeup waiting thread
5.[device-B] driver checks that slot_id is still in use (by device-A) in
xhci_alloc_virt_device, and fail to enumerate due to this
conflict
6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device
To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and
xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context
when disable slot command completes successfully. Simultaneously, adjust
function xhci_free_virt_device to accurately handle device release.
[minor smatch warning and commit message fix -Mathias]
Cc: [email protected]
Fixes: 7faac1953ed1 ("xhci: avoid race between disable slot command and host runtime suspend")
Signed-off-by: Weitao Wang <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 17f46b803d4f23c66cacce81db35fef3adb8f2af upstream.
In production we have been hitting the following warning consistently
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0
Workqueue: nfsiod nfs_direct_write_schedule_work [nfs]
RIP: 0010:refcount_warn_saturate+0x9c/0xe0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x9f/0x130
? refcount_warn_saturate+0x9c/0xe0
? report_bug+0xcc/0x150
? handle_bug+0x3d/0x70
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? refcount_warn_saturate+0x9c/0xe0
nfs_direct_write_schedule_work+0x237/0x250 [nfs]
process_one_work+0x12f/0x4a0
worker_thread+0x14e/0x3b0
? ZSTD_getCParams_internal+0x220/0x220
kthread+0xdc/0x120
? __btf_name_valid+0xa0/0xa0
ret_from_fork+0x1f/0x30
This is because we're completing the nfs_direct_request twice in a row.
The source of this is when we have our commit requests to submit, we
process them and send them off, and then in the completion path for the
commit requests we have
if (nfs_commit_end(cinfo.mds))
nfs_direct_write_complete(dreq);
However since we're submitting asynchronous requests we sometimes have
one that completes before we submit the next one, so we end up calling
complete on the nfs_direct_request twice.
The only other place we use nfs_generic_commit_list() is in
__nfs_commit_inode, which wraps this call in a
nfs_commit_begin();
nfs_commit_end();
Which is a common pattern for this style of completion handling, one
that is also repeated in the direct code with get_dreq()/put_dreq()
calls around where we process events as well as in the completion paths.
Fix this by using the same pattern for the commit requests.
Before with my 200 node rocksdb stress running this warning would pop
every 10ish minutes. With my patch the stress test has been running for
several hours without popping.
Signed-off-by: Josef Bacik <[email protected]>
Cc: [email protected]
Signed-off-by: Trond Myklebust <[email protected]>
[ chanho : Backports v5.4.y, commit 133a48abf6ec (NFS: Fix up commit deadlocks)
is needed to use nfs_commit_end ]
Signed-off-by: Chanho Min <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 133a48abf6ecc535d7eddc6da1c3e4c972445882 upstream.
If O_DIRECT bumps the commit_info rpcs_out field, then that could lead
to fsync() hangs. The fix is to ensure that O_DIRECT calls
nfs_commit_end().
Fixes: 723c921e7d ("sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Chanho Min <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d527f51331cace562393a8038d870b3e9916686f upstream.
There is a UAF when xfstests on cifs:
BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160
Read of size 4 at addr ffff88810103fc08 by task cifsd/923
CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45
...
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
kasan_check_range+0x145/0x1a0
smb2_is_network_name_deleted+0x27/0x160
cifs_demultiplex_thread.cold+0x172/0x5a4
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 923:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_slab_alloc+0x54/0x60
kmem_cache_alloc+0x147/0x320
mempool_alloc+0xe1/0x260
cifs_small_buf_get+0x24/0x60
allocate_buffers+0xa1/0x1c0
cifs_demultiplex_thread+0x199/0x10d0
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
Freed by task 921:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x143/0x1b0
kmem_cache_free+0xe3/0x4d0
cifs_small_buf_release+0x29/0x90
SMB2_negotiate+0x8b7/0x1c60
smb2_negotiate+0x51/0x70
cifs_negotiate_protocol+0xf0/0x160
cifs_get_smb_ses+0x5fa/0x13c0
mount_get_conns+0x7a/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The UAF is because:
mount(pid: 921) | cifsd(pid: 923)
-------------------------------|-------------------------------
| cifs_demultiplex_thread
SMB2_negotiate |
cifs_send_recv |
compound_send_recv |
smb_send_rqst |
wait_for_response |
wait_event_state [1] |
| standard_receive3
| cifs_handle_standard
| handle_mid
| mid->resp_buf = buf; [2]
| dequeue_mid [3]
KILL the process [4] |
resp_iov[i].iov_base = buf |
free_rsp_buf [5] |
| is_network_name_deleted [6]
| callback
1. After send request to server, wait the response until
mid->mid_state != SUBMITTED;
2. Receive response from server, and set it to mid;
3. Set the mid state to RECEIVED;
4. Kill the process, the mid state already RECEIVED, get 0;
5. Handle and release the negotiate response;
6. UAF.
It can be easily reproduce with add some delay in [3] - [6].
Only sync call has the problem since async call's callback is
executed in cifsd process.
Add an extra state to mark the mid state to READY before wakeup the
waitter, then it can get the resp safely.
Fixes: ec637e3ffb ("[CIFS] Avoid extra large buffer allocation (and memcpy) in cifs_readpages")
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Zhang Xiaoxu <[email protected]>
Signed-off-by: Steve French <[email protected]>
[fs/cifs was moved to fs/smb/client since
38c8a9a52082 ("smb: move client and server files to common directory fs/smb").
We apply the patch to fs/cifs with some minor context changes.]
Signed-off-by: He Zhe <[email protected]>
Signed-off-by: Xiangyu Chen <[email protected]>
[ chanho: Backported to v5.4.y ]
Signed-off-by: Chanho Min <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit ca22da2fbd693b54dc8e3b7b54ccc9f7e9ba3640 ]
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%[email protected]/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <[email protected]>
CC: Xin Long <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Reviewed-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
[ skulkarni: Adjusted patch for file 'tc_actions.sh' wrt the mainline commit ]
Signed-off-by: Shubham Kulkarni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
