qctecmdr
05a60a6791
Merge "ARM: dts: msm: Add USB PHY related PDC interrupts and enable on sdxlemur"
2020-12-02 03:04:38 -08:00
Anurag Chouhan
aec3e8e6c2
ARM: dts: msm: Update ion heap for monaco
...
Update reg memory region reserved for the ion allocator.
Change-Id: Ie2673baa41b8960953c5cf44caad2d8e946ff243
2020-12-02 11:14:23 +05:30
Pratham Pratap
6b5fa4faad
ARM: dts: msm: Update tune params of HS PHY
...
Update the tune params(USB_PHY_PARAMETER_OVERRIDE_X0,
USB_PHY_PARAMETER_OVERRIDE_X1, USB_PHY_PARAMETER_OVERRIDE_X2)
according to the latest HPG sequence for Shima and Lahaina.
Change-Id: Ida54fb3f01f7abba564ed695ed279f8330e0d40c
2020-12-01 21:32:30 -08:00
Anurag Chouhan
446c4e1999
ARM: dts: msm: Add SMMU device tree for Monaco
...
Add SMMU device tree support for monaco target
on rumi platform.
Change-Id: Ie1f18d85864408e4e951777f318c4d530d32bb81
2020-12-01 21:07:00 -08:00
Murali Nalajala
49ac72dafc
ARM: dts: msm: add new properties to guestvm node
...
Add new properties to support cpu isolation and unisolation
when the VM boot is start.
Change-Id: I56a0a344230ef22e84a375431d0be2e0ed52a130
2020-12-02 09:49:44 +05:30
Neeraj Upadhyay
82e16bca34
dt-bindings: Update bindings for guestvm-loader
...
Update bindings for guestvm-loader with the new properties
for CPU reservation.
Change-Id: Ic3f0e9282524ecf9021ded582d67e80752156301
2020-12-01 19:12:29 -08:00
Lijuan Gao
af551eb2bc
ARM: dts: msm: Add clock support for uart driver
...
Clock is available, so add the clock support for sdx12 uart driver.
Change-Id: I7ed108a50075f24b647bf489e745b4076179a1bb
2020-12-02 11:02:35 +08:00
Mukesh Ojha
74a0510f4a
ARM: dts: msm: Disable atmel_mxt_ts on shima
...
Disable atmel maxTouch on shima platform.
Change-Id: Ib9422dc1382657513f4f8809fda906ce0e7af859
2020-12-01 16:25:01 +05:30
Mohammed Siddiq
d038d835c3
ARM: dts: msm: Increase max voltage of S11B regulator to 2.04V
...
Increase max voltage of S11B regulator to 2.04V.
Change-Id: I424ab87db26576dfae288b5fa0b30617d56f9db1
2020-12-01 12:51:47 +05:30
Siddartha Mohanadoss
bea76a2b86
ARM: dts: msm: Enable PCIe EP on sdxlemur MBB
...
Enable PCIe EP and MHI device for mobile broadband
interface module platform.
Change-Id: I01a753c204020b46ed6f27322728c40ccbb4d73d
2020-11-30 12:12:28 -08:00
Siddartha Mohanadoss
542a444786
ARM: dts: msm: Add PCIe EP and MHI device for sdxlemur
...
PCIe end point device driver and Modem host interface driver
is used to support mobile broadband interface module.
Change-Id: I3237dfcc56098df9efda9b5c59976deaf829a521
2020-11-30 12:12:28 -08:00
Sarthak Garg
879b896871
ARM: dts: msm: Add eMMC, SD card support for yupik
...
Add eMMC, SD card support for yupik.
Change-Id: I09dfa009575967b5263a7b057a1e4e758c7990ed
2020-11-30 16:10:35 +05:30
Neeraj Upadhyay
1bd8078329
ARM: dts: msm: Add initial device tree for Yupik for IDP/ATP
...
Add initial device tree to support Yupik IDP and ATP platforms.
Change-Id: Ie90cf5ffde58e900706f8e4923d1d49e50acd477
2020-11-30 15:20:13 +05:30
Naman Padhiar
c65cbc41b4
ARM: dts: msm: Add ICNSS2 DT node for Yupik
...
Add ICNSS2 DT node for Yupik
Change-Id: I55a18081ba800c74a64b7ef91b4ac9d991a36cd5
2020-11-30 12:55:09 +05:30
Pengfei Liu
f3ce2ebedb
ARM: dts: msm: Add camera device tree inclusions for lahaina hdk
...
Need update camera sensor node for lahaina hdk platform.
Change-Id: Iea2b9b858b834029406a3d698779749c21d652ae
2020-11-29 16:45:49 -08:00
qctecmdr
6fb909736e
Merge "ARM: dts: msm: Make sdhc aliases start from 0"
2020-11-28 22:12:43 -08:00
Ram Prakash Gupta
71e4c799a6
ARM: dts: msm: Bind emmc and sdcard slot to 0 & 1
...
Bind emmc and sdcard slot to 0 & 1 respectively to avoid
emmc and sdcard slot mixup.
Change-Id: I85196b467eb1e1b938fc7f657a95d7a34b19532f
2020-11-29 07:00:15 +05:30
Ram Prakash Gupta
0f4b18cdad
ARM: dts: msm: Bind sdcard to slot 1
...
Bind sdcard to slot 1 to avoid slot mixup between emmc
and sdcard.
Change-Id: I56c74bd7b5a09649f2a54bc22ddb901363216e03
2020-11-29 06:58:09 +05:30
qctecmdr
f6a814ac27
Merge "ARM: dts: qcom: use separate thermal zone names for modem pa for shima"
2020-11-27 19:19:17 -08:00
qctecmdr
37e48863f0
Merge "ARM: dts: msm: switch off kpti on shima/lahaina/yupik"
2020-11-27 19:19:17 -08:00
qctecmdr
99d10c01da
Merge "ARM: dts: msm: Add support for RPMHCC for YUPIK"
2020-11-27 19:19:17 -08:00
qctecmdr
1f6d511bf3
Merge "ARM: dts: msm: update PMU cache and log buffer addresses for holi target"
2020-11-27 15:17:14 -08:00
qctecmdr
b36b918c63
Merge "ARM: dts: msm: Enable KPDPWR software debounce for PMK8350"
2020-11-27 15:17:14 -08:00
qctecmdr
9ea3202c3d
Merge "ARM: dts: qcom: Add RPMh controlled PMIC regulators for yupik"
2020-11-27 11:18:48 -08:00
qctecmdr
1cb992c074
Merge "ARM: dts: msm: Remove bluetooth bootstrap pin EDL_MODE settings"
2020-11-27 11:18:48 -08:00
Taniya Das
b04ca6dd34
ARM: dts: msm: Add support for RPMHCC for YUPIK
...
Enable the rpmh clock driver and use dummy clock driver for YUPIK RUMI.
Change-Id: Ib251309f00a0afd18bc3896b22d06c27e4d0a349
2020-11-27 22:59:46 +05:30
qctecmdr
b6daa6b8b7
Merge "Revert "ARM: dts: msm: Add dma-coherent for tmc-etr on Lahaina""
2020-11-27 06:25:46 -08:00
Ram Prakash Gupta
c0ee7832ec
ARM: dts: msm: Add dma coherent flag for ufs
...
Add dma coherent flag to avoid inconsistency with the data
transfer through dma involving ufs.
Change-Id: I733f0fc46ed04f51a9368c37e1e85bac347d3822
2020-11-27 18:10:46 +05:30
Vatsal Bucha
e74cc92e7b
ARM: dts: msm: Change micbias no for VA DMIC for shima
...
Update micbias no for VA DMIC as per schematics.
Change-Id: I5a3dcfb2ea2938e869da71a9c77c6fa507c47634
2020-11-27 16:28:56 +05:30
Vinayak Menon
5dabbf5407
ARM: dts: msm: switch off kpti on shima/lahaina/yupik
...
Turn off kpti on targets that are not vulnerable.
Change-Id: I2d4aecc28f22bb460d93a79a3de34da9c8e75ba7
2020-11-27 16:11:18 +05:30
Manaf Meethalavalappu Pallikunhi
1f265a56a8
ARM: dts: qcom: use separate thermal zone names for modem pa for shima
...
Use separate thermal zone node names for same modem pa sensors with
different thermal governors. Otherwise second thermal zone node will
override first one.
Change-Id: I7e2d76eb13f9466b451639ab9cea8e8b43185c67
2020-11-27 16:05:23 +05:30
Naina Mehta
666f3418c7
ARM: dts: msm: Add trustedvm enablement nodes for Yupik
...
Add trusted VM configuration for Yupik SoC.
Change-Id: I4f628c7958ac32ebd41e99243a6849b7b21812ed
2020-11-27 13:27:11 +05:30
Jishnu Prakash
a9deebd92d
ARM: dts: qcom: Add RPMh controlled PMIC regulators for yupik
...
Add rpmh-regulator device nodes for the PMIC PM7325, PM8350C,
and PMR735A regulators. This ensures that consumers are able to
modify the physical state of these PMIC regulators.
Change-Id: I30719e56559e1f2f3cf31decb15ef168f6fe5ca6
2020-11-26 21:00:36 -08:00
Kiran Gunda
25f03c3cd7
ARM: dts: msm: Enable KPDPWR software debounce for PMK8350
...
Enable the SW debounce handling for KPDPWR_N rising edge.
Change-Id: I6a083b1436ae4339de1eef58ffe0f464df02b1e3
2020-11-26 20:20:42 -08:00
Santosh Mardi
1b046bf673
ARM: dts: msm: update PMU cache and log buffer addresses for holi target
...
Locations of PMU cache and log buffer are changed on RIMPS side.
Update them accordingly for driver.
Change-Id: If396306e148ff670eb10c9849f3f367742d42fe7
2020-11-26 18:23:37 -08:00
Jinlong Mao
dcb08f6484
Revert "ARM: dts: msm: Add dma-coherent for tmc-etr on Lahaina"
...
This reverts commit ae8150eac6 .
Change-Id: Iaffe99667a84834907c710e500ed0e5d48845539
2020-11-26 08:43:39 -08:00
qctecmdr
b7838e4ef4
Merge "ARM: dts: msm: Update BCL, Alarm and CPU thermal mitigation for SHIMA"
2020-11-26 05:30:40 -08:00
Jishnu Prakash
b874d82214
dt-bindings: qpnp-amoled: add support to disable pulse skipping
...
Add support to disable pulse skipping for customers that require it.
When the property is added, IBB regulator is forced into CCM mode
whenever it gets enabled.
Change-Id: I46dbe4f411b0f4022105188349d7a6f4d1412254
2020-11-26 18:11:11 +05:30
Ram Prakash Gupta
a4d7fb1274
ARM: dts: msm: Make sdhc aliases start from 0
...
Make sdhc aliases start from 0 instead of to create
block devices starting from mmcblk0 for emmc and mmcblk1
for sdcard.
Change-Id: I3cd709230a50afec0c9f3a8b481f458d9a15765b
2020-11-26 17:17:22 +05:30
Manaf Meethalavalappu Pallikunhi
8ef2758011
ARM: dts: qcom: update skin sensor modem mitigation threshold for shima
...
Update skin sensor thermal zone threshold for modem level 3
mitigation for shima.
Change-Id: Ibf9ccd1998becc541e1646ca2d2429800c6e57b4
2020-11-26 17:11:31 +05:30
Deepak Kumar Singh
1e58c041b8
ARM: dts: msm: Enable mproc drivers for SDXNIGHTJAR
...
Enable smem, smp2p, glink for communication with remote host.
Change-Id: Ibfce48c8e4e06f573194154180863e171042764e
2020-11-26 16:10:42 +05:30
qctecmdr
663f600397
Merge "dt-bindings: input: qpnp-power-on: Update "reg" property description"
2020-11-26 00:33:35 -08:00
qctecmdr
d794724a84
Merge "ARM: dts: msm: add no-memory-wc to sram node for holi"
2020-11-26 00:33:35 -08:00
qctecmdr
421c0aa6d2
Merge "ARM: dts: msm: remove SMB1398 clock frequency setting on holi"
2020-11-26 00:33:35 -08:00
qctecmdr
38eb94ccfb
Merge "ARM: dts: msm: Update interconnect nodes for YUPIK"
2020-11-26 00:33:35 -08:00
Guru Das Srinagesh
8b87ea3c6c
Revert "ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards"
...
This change reverts commit be1f95bbcd .
Disabling VBUS_DET causes adb enumeration to fail as usb extcon node
need to be assigned an alternate device, such as pm7250b_pdphy. However,
to get this properly working, we need PMIC HW initialization to be done
in the bootloader stage. Hence reverting this until that is ready.
Change-Id: Ie8efaab512cc74a4d61f88021c6d87ef001d5aae
2020-11-25 15:23:56 -08:00
Santosh Mardi
a2607bacd2
ARM: dts: msm: add no-memory-wc to sram node for holi
...
This flag indicates to the driver that SRAM memory region
has not to be remapped as write combining.
Change-Id: I05529a30066d373ce1fad9a88a6f18e9e4467b64
2020-11-25 05:54:26 -08:00
Kiran Gunda
ea9228516a
dt-bindings: input: qpnp-power-on: Update "reg" property description
...
Update the description of "reg" property to add the PON_PBS base
address along with PON_HLOS base address. Also add "reg-names"
property.
Change-Id: I257950babd4b68f3ab933679bd94936813531e25
2020-11-25 04:35:08 -08:00
Odelu Kukatla
3b55265d6c
ARM: dts: msm: Update interconnect nodes for YUPIK
...
Add bcm voter devices that live under RSC devices
to allow interconnect providers to target their
votes for meeting bandwidth constraints. Also update
the interconnect nodes so that real provider drivers
get probed.
Change-Id: I2359c9b2b789891045d2d70f83d5b19ebc529646
2020-11-25 03:16:54 -08:00
Odelu Kukatla
4b0a5adb19
dt-bindings: interconnect: update interconnect bindings
...
Update interconnect device bindings. These devices can be
used to describe any RPMH and NoC based interconnect devices.
Change-Id: I4bca29bda915717690efd24bf80ce1e3bd3b4154
2020-11-25 03:15:34 -08:00