commit d8c6edfa3f4ee0d45d7ce5ef18d1245b78774b9d upstream.
Some devices, such as the Winbond Electronics Corp. Virtual Com Port
(Vendor=0416, ProdId=5011), lockup when usb_set_interface() or
usb_clear_halt() are called. This device has only a single
altsetting, so it should not be necessary to call usb_set_interface().
Acked-by: Pete Zaitcev <[email protected]>
Signed-off-by: Jeremy Figgins <[email protected]>
Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 2dcb3964544177c51853a210b6ad400de78ef17d ]
With kaslr the kernel image is placed at a random place, so starting the
bottom-up allocation with the kernel_end can result in an allocation
failure and a warning like this one:
hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
------------[ cut here ]------------
memblock: bottom-up allocation failed, memory hotremove may be affected
WARNING: CPU: 0 PID: 0 at mm/memblock.c:332 memblock_find_in_range_node+0x178/0x25a
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0+ #1169
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:memblock_find_in_range_node+0x178/0x25a
Code: e9 6d ff ff ff 48 85 c0 0f 85 da 00 00 00 80 3d 9b 35 df 00 00 75 15 48 c7 c7 c0 75 59 88 c6 05 8b 35 df 00 01 e8 25 8a fa ff <0f> 0b 48 c7 44 24 20 ff ff ff ff 44 89 e6 44 89 ea 48 c7 c1 70 5c
RSP: 0000:ffffffff88803d18 EFLAGS: 00010086 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000240000000 RCX: 00000000ffffdfff
RDX: 00000000ffffdfff RSI: 00000000ffffffea RDI: 0000000000000046
RBP: 0000000100000000 R08: ffffffff88922788 R09: 0000000000009ffb
R10: 00000000ffffe000 R11: 3fffffffffffffff R12: 0000000000000000
R13: 0000000000000000 R14: 0000000080000000 R15: 00000001fb42c000
FS: 0000000000000000(0000) GS:ffffffff88f71000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa080fb401000 CR3: 00000001fa80a000 CR4: 00000000000406b0
Call Trace:
memblock_alloc_range_nid+0x8d/0x11e
cma_declare_contiguous_nid+0x2c4/0x38c
hugetlb_cma_reserve+0xdc/0x128
flush_tlb_one_kernel+0xc/0x20
native_set_fixmap+0x82/0xd0
flat_get_apic_id+0x5/0x10
register_lapic_address+0x8e/0x97
setup_arch+0x8a5/0xc3f
start_kernel+0x66/0x547
load_ucode_bsp+0x4c/0xcd
secondary_startup_64_no_verify+0xb0/0xbb
random: get_random_bytes called from __warn+0xab/0x110 with crng_init=0
---[ end trace f151227d0b39be70 ]---
At the same time, the kernel image is protected with memblock_reserve(),
so we can just start searching at PAGE_SIZE. In this case the bottom-up
allocation has the same chances to success as a top-down allocation, so
there is no reason to fallback in the case of a failure. All together it
simplifies the logic.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 8fabc623238e ("powerpc: Ensure that swiotlb buffer is allocated from low memory")
Signed-off-by: Roman Gushchin <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Wonhyuk Yang <[email protected]>
Cc: Thiago Jung Bauermann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cb8563f5c735a042ea2dd7df1ad55ae06d63ffeb ]
When the host sends multiple h2cdata PDUs, we keep track on
the receive progress and calculate the scatterlist index and
offsets.
The issue is that sg_offset should only be kept for the first
iov entry we map in the iovec as this is the difference between
our cursor and the sg entry offset itself.
In addition, the sg index was calculated wrong because we should
not round up when dividing the command byte offset with PAG_SIZE.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Narayan Ayalasomayajula <[email protected]>
Tested-by: Narayan Ayalasomayajula <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a900cac3750b9f0b8f5ed0503d9c6359532f644d ]
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.
Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 10662a33dc ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cc9f07a838c4988ed244d0907cb71d54b85482a5 ]
So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.
Fixes: f1e911d5d0 ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 43f4a20a1266d393840ce010f547486d14cc0071 ]
Last TCAM data contains TCAM enable bit.
It should be written after SRAM data before entry enabled.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 88c7a9fd9bdd3e453f04018920964c6f848a591a ]
When sending a packet, we will prepend it with an LAPB header.
This modifies the shared parts of a cloned skb, so we should copy the
skb rather than just clone it, before we prepend the header.
In "Documentation/networking/driver.rst" (the 2nd point), it states
that drivers shouldn't modify the shared parts of a cloned skb when
transmitting.
The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called
when an skb is being sent, clones the skb and sents the clone to
AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte
pseudo-header before handing over the skb to us, if we don't copy the
skb before prepending the LAPB header, the first byte of the packets
received on AF_PACKET sockets can be corrupted.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <[email protected]>
Acked-by: Martin Schiller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a5bfe6b4675e0eefbd9418055b5cc6e89af27eb4 ]
When creation of a new rule that requires allocation of an FTE fails,
need to call to tree_put_node on the FTE in order to release its'
resource.
Fixes: cefc23554fc2 ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Maor Gottlieb <[email protected]>
Reviewed-by: Alaa Hleihel <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f559a356043a55bab25a4c00505ea65c50a956fb ]
This reverts commit 2ad1274fa3
VF queues were not brought up when PF was brought up after being
downed if the VF driver disabled VFs queues during PF down.
This could happen in some older or external VF driver implementations.
The problem was that PF driver used vf->queues_enabled as a condition
to decide what link-state it would send out which caused the issue.
Remove the check for vf->queues_enabled in the VF link notify.
Now VF will always be notified of the current link status.
Also remove the queues_enabled member from i40e_vf structure as it is
not used anymore. Otherwise VNF implementation was broken and caused
a link flap.
The original commit was a workaround to avoid breaking existing VFs though
it's really a fault of the VF code not the PF. The commit should be safe to
revert as all of the VFs we know of have been fixed. Also, since we now
know there is a related bug in the workaround, removing it is preferred.
Fixes: 2ad1274fa3 ("i40e: don't report link up for a VF who hasn't enabled")
Signed-off-by: Aleksandr Loktionov <[email protected]>
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ebc8d125062e7dccb7922b2190b097c20d88ad96 ]
This patch sets the default return value to -IGC_ERR_NVM in
igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM
write EEWR timeout.
Fixes: ab40561268 ("igc: Add NVM support")
Signed-off-by: Kevin Lo <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit aa880c6f3ee6dbd0d5ab02026a514ff8ea0a3328 ]
Dcfg was overlapping with clockgen address space which resulted
in failure in memory allocation for dcfg. According regs description
dcfg size should not be bigger than 4KB.
Signed-off-by: Zyta Szpak <[email protected]>
Fixes: 8126d88162 ("arm64: dts: add QorIQ LS1046A SoC support")
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5399d52233c47905bbf97dcbaa2d7a9cc31670ba ]
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst
from an incoming packet to get stolen and attached to the UDP socket from
whence it is leaked when that socket is closed.
When a network namespace is removed, the wait for dst records to be cleaned
up happens before the cleanup of the rxrpc and UDP socket, meaning that the
wait never finishes.
Fix this by moving the rxrpc (and, by dependence, the afs) private
per-network namespace registrations to the device group rather than subsys
group. This allows cached rxrpc local endpoints to be cleared and their
UDP sockets closed before we try waiting for the dst records.
The symptom is that lines looking like the following:
unregister_netdevice: waiting for lo to become free
get emitted at regular intervals after running something like the
referenced syzbot test.
Thanks to Vadim for tracking this down and work out the fix.
Reported-by: [email protected]
Reported-by: Vadim Fedorenko <[email protected]>
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <[email protected]>
Acked-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f4172b084342fd3f9e38c10650ffe19eac30d8ce ]
Since struct device is refcounted, we shouldn't free the vu_dev
immediately when it's removed from the platform device, but only
when the references actually all go away. Move the freeing to
the release to accomplish that.
Fixes: 5d38f32499 ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f4a2da755a7e1f5d845c52aee71336cee289935a ]
Since ctx.optlen is signed, a larger value than max_value could be
passed, as it is later on used as unsigned, which causes a WARN_ON_ONCE
in the copy_to_user.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit bb8b81e396f7afbe7c50d789e2107512274d2a35 ]
A toctou issue in `__cgroup_bpf_run_filter_getsockopt` can trigger a
WARN_ON_ONCE in a check of `copy_from_user`.
`*optlen` is checked to be non-negative in the individual getsockopt
functions beforehand. Changing `*optlen` in a race to a negative value
will result in a `copy_from_user(ctx.optval, optval, ctx.optlen)` with
`ctx.optlen` being a negative integer.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a9164910c5ceed63551280a4a0b85d37ac2b19a5 ]
Indicated by AML code in ACPI table, the touchpad in-use could be found
on two possible slave addresses on &i2c3, i.e. hid@15 and hid@2c. And
which one is in-use can be determined by reading another address on the
I2C bus. Unfortunately, for DT boot, there is currently no support in
firmware to make this check and patch DT accordingly. This results in
a non-functional touchpad on those C630 devices with hid@2c.
As i2c-hid driver will stop probing the device if there is nothing on
the slave address, we can actually keep both devices enabled in DT, and
i2c-hid driver will only probe the existing one. The only problem is
that we cannot set up pinctrl in both device nodes, as two devices with
the same pinctrl will cause pin conflict that makes the second device
fail to probe. Let's move the pinctrl state up to parent node to solve
this problem. As the pinctrl state of parent node is already defined in
sdm845.dtsi, it ends up with overwriting pinctrl-0 with i2c3_hid_active
state added in there.
Fixes: 11d0e4f28156 ("arm64: dts: qcom: c630: Polish i2c-hid devices")
Signed-off-by: Shawn Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
commit 43377df70480f82919032eb09832e9646a8a5efb upstream.
Teraoka AD2000 uses the CP210x driver, but the chip VID/PID is
customized with 0988/0578. We need the driver to support the new
VID/PID.
Signed-off-by: Chenxin Jin <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 640f17c82460e9724fd256f0a1f5d99e7ff0bda4 ]
create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.
Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.
Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ac687e6e8c26181a33270efd1a2e2241377924b0 ]
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1d489151e9f9d1647110277ff77282fe4d96d09b ]
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.
We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.
Just ignore it and move on.
Reported-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4716a7c50c5c66d6ddc42401e1e0ba13b492e105 ]
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Bing Guo <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Anson Jacob <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 901c1ec05ef277ce9d43cb806a225b28b3efe89a ]
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Signed-off-by: Sung Lee <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dd3a44c06f7b4f14e90065bf05d62c255b20005f ]
Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in
little endian mode. That breaks compilation of our alignment handler
test:
/tmp/cco4l14N.s: Assembler messages:
/tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian
/tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian
make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1
These tests do pass on little endian machines, as the kernel will
still emulate those instructions even when running little
endian (which is arguably a kernel bug).
But we don't really need to test that case, so ifdef those
instructions out to get the alignment test building again.
Reported-by: Libor Pechacek <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Tested-by: Libor Pechacek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4d6b1c95b974761c01cbad92321b82232b66d2a2 ]
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and
the metadata size play a vital role in deteriming the host buffer size.
If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer,
instead the controller adds it.
Signed-off-by: Revanth Rajashekar <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5cdc4a6950a883594e9640b1decb3fcf6222a594 ]
When the capacity of the disc is too large (assuming the 4.7G
specification), the disc (UDF file system) will be burned
multiple times in the windows (Multisession Usage). When the
remaining capacity of the CD is less than 300M (estimated
value, for reference only), open the CD in the Linux system,
the content of the CD is displayed as blank (the kernel will
say "No VRS found"). Windows can display the contents of the
CD normally.
Through analysis, in the "fs/udf/super.c": udf_check_vsd
function, the actual value of VSD_MAX_SECTOR_OFFSET may
be much larger than 0x800000. According to the current code
logic, it is found that the type of sbi->s_session is "__s32",
when the remaining capacity of the disc is less than 300M
(take a set of test values: sector=3154903040,
sbi->s_session=1540464, sb->s_blocksize_bits=11 ), the
calculation result of "sbi->s_session << sb->s_blocksize_bits"
will overflow. Therefore, it is necessary to convert the
type of s_session to "loff_t" (when udf_check_vsd starts,
assign a value to _sector, which is also converted in this
way), so that the result will not overflow, and then the
content of the disc can be displayed normally.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: lianzhi chang <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 764907293edc1af7ac857389af9dc858944f53dc ]
While testing live partition mobility, we have observed occasional crashes
of the Linux partition. What we've seen is that during the live migration,
for specific configurations with large amounts of memory, slow network
links, and workloads that are changing memory a lot, the partition can end
up being suspended for 30 seconds or longer. This resulted in the following
scenario:
CPU 0 CPU 1
------------------------------- ----------------------------------
scsi_queue_rq migration_store
-> blk_mq_start_request -> rtas_ibm_suspend_me
-> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me
_______________________________________V
|
V
-> IPI from CPU 1
-> rtas_percpu_suspend_me
-> __rtas_suspend_last_cpu
-- Linux partition suspended for > 30 seconds --
-> for_each_online_cpu(cpu)
plpar_hcall_norets(H_PROD
-> scsi_dispatch_cmd
-> scsi_times_out
-> scsi_abort_command
-> queue_delayed_work
-> ibmvfc_queuecommand_lck
-> ibmvfc_send_event
-> ibmvfc_send_crq
- returns H_CLOSED
<- returns SCSI_MLQUEUE_HOST_BUSY
-> __blk_mq_requeue_request
-> scmd_eh_abort_handler
-> scsi_try_to_abort_cmd
- returns SUCCESS
-> scsi_queue_insert
Normally, the SCMD_STATE_COMPLETE bit would protect against the command
completion and the timeout, but that doesn't work here, since we don't
check that at all in the SCSI_MLQUEUE_HOST_BUSY path.
In this case we end up calling scsi_queue_insert on a request that has
already been queued, or possibly even freed, and we crash.
The patch below simply increases the default I/O timeout to avoid this race
condition. This is also the timeout value that nearly all IBM SAN storage
recommends setting as the default value.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Brian King <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit bcd7059abc19e6ec5b2260dff6a008fb99c4eef9 ]
Instead of queueing jackpoll_work, runtime resume the codec to let it
use different jack detection methods based on jackpoll_interval.
This partially matches SOF driver's behavior with commit a6e7d0a4bdb0
("ALSA: hda: fix jack detection with Realtek codecs when in D3"), the
difference is SOF unconditionally resumes the codec.
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b2b0f16fa65e910a3ec8771206bb49ee87a54ac5 ]
A race condition exists between the response handler getting called because
of exchange_mgr_reset() (which clears out all the active XIDs) and the
response we get via an interrupt.
Sequence of events:
rport ba0200: Port timeout, state PLOGI
rport ba0200: Port entered PLOGI state from PLOGI state
xid 1052: Exchange timer armed : 20000 msecs xid timer armed here
rport ba0200: Received LOGO request while in state PLOGI
rport ba0200: Delete port
rport ba0200: work event 3
rport ba0200: lld callback ev 3
bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200
bnx2fc: ba0200 - rport not created Yet!!
/* Here we reset any outstanding exchanges before
freeing rport using the exch_mgr_reset() */
xid 1052: Exchange timer canceled
/* Here we got two responses for one xid */
xid 1052: invoking resp(), esb 20000000 state 3
xid 1052: invoking resp(), esb 20000000 state 3
xid 1052: fc_rport_plogi_resp() : ep->resp_active 2
xid 1052: fc_rport_plogi_resp() : ep->resp_active 2
Skip the response if the exchange is already completed.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Javed Hasan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 72eeb7c7151302ef007f1acd018cbf6f30e50321 ]
If the port is in SRP_RPORT_FAIL_FAST state when srp_reconnect_rport() is
entered, a transition to SDEV_BLOCK would be illegal, and a kernel WARNING
would be triggered. Skip scsi_target_block() in this case.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fcd38f178b785623c0325958225744f0d8a075c0 ]
The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook".
Add this model to the dmi_switches_allow_list.
Signed-off-by: Arnold Gozum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 46c54cf2706122c37497896d56d67b0c0aca2ede ]
The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen,
with the X and Y coordinates swapped compared to the LCD panel.
Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y"
device-property to the i2c-client instantiated for this device before
the driver binds.
This is the first entry of a Goodix touchscreen to touchscreen_dmi.c,
so far DMI quirks for Goodix touchscreen's have been added directly
to drivers/input/touchscreen/goodix.c. Currently there are 3
DMI tables in goodix.c:
1. rotated_screen[] for devices where the touchscreen is rotated
180 degrees vs the LCD panel
2. inverted_x_screen[] for devices where the X axis is inverted
3. nine_bytes_report[] for devices which use a non standard touch
report size
Arguably only 3. really needs to be inside the driver and the other
2 cases are better handled through the generic touchscreen DMI quirk
mechanism from touchscreen_dmi.c, which allows adding device-props to
any i2c-client. Esp. now that goodix.c is using the generic
touchscreen_properties code.
Alternative to the approach from this patch we could add a 4th
dmi_system_id table for devices with swapped-x-y axis to goodix.c,
but that seems undesirable.
Cc: Bastien Nocera <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 764257d9069a9c19758b626cc1ba4ae079335d9e ]
On deferred probe, we will get the following splat:
cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517
WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78
...
(regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc)
(release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0)
(really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4)
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
commit b25b0b871f206936d5bca02b80d38c05623e27da upstream.
With the following patches:
- btrfs: backref, only collect file extent items matching backref offset
- btrfs: backref, not adding refs from shared block when resolving normal backref
- btrfs: backref, only search backref entries from leaves of the same root
we only collect the normal data refs we want, so the imprecise upper
bound total_refs of that EXTENT_ITEM could now be changed to the count
of the normal backref entry we want to search.
Background and how the patches fit together:
Btrfs has two types of data backref.
For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the
exact block number. Therefore, we need to call resolve_indirect_refs.
It uses btrfs_search_slot to locate the leaf block. Then
we need to walk through the leaves to search for the EXTENT_DATA items
that have disk bytenr matching the extent item (add_all_parents).
When resolving indirect refs, we could take entries that don't
belong to the backref entry we are searching for right now.
For that reason when searching backref entry, we always use total
refs of that EXTENT_ITEM rather than individual count.
For example:
item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize
extent refs 24 gen 7302 flags DATA
shared data backref parent 394985472 count 10 #1
extent data backref root 257 objectid 260 offset 1048576 count 3 #2
extent data backref root 256 objectid 260 offset 65536 count 6 #3
extent data backref root 257 objectid 260 offset 65536 count 5 #4
For example, when searching backref entry #4, we'll use total_refs
24, a very loose loop ending condition, instead of total_refs = 5.
But using total_refs = 24 is not accurate. Sometimes, we'll never find
all the refs from specific root. As a result, the loop keeps on going
until we reach the end of that inode.
The first 3 patches, handle 3 different types refs we might encounter.
These refs do not belong to the normal backref we are searching, and
hence need to be skipped.
This patch changes the total_refs to correct number so that we could
end loop as soon as we find all the refs we want.
btrfs send uses backref to find possible clone sources, the following
is a simple test to compare the results with and without this patch:
$ btrfs subvolume create /sub1
$ for i in `seq 1 163840`; do
dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct
done
$ btrfs subvolume snapshot /sub1 /sub2
$ for i in `seq 1 163840`; do
dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct
done
$ btrfs subvolume snapshot -r /sub1 /snap1
$ time btrfs send /snap1 | btrfs receive /volume2
Without this patch:
real 69m48.124s
user 0m50.199s
sys 70m15.600s
With this patch:
real 1m59.683s
user 0m35.421s
sys 2m42.684s
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
[ add patchset cover letter with background and numbers ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cfc0eed0ec89db7c4a8d461174cabfaa4a0912c7 upstream.
We could have some nodes/leaves in subvolume whose owner are not the
that subvolume. In this way, when we resolve normal backrefs of that
subvolume, we should avoid collecting those references from these blocks.
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ed58f2e66e849c34826083e5a6c1b506ee8a4d8e upstream.
All references from the block of SHARED_DATA_REF belong to that shared
block backref.
For example:
item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95
extent refs 24 gen 7302 flags DATA
extent data backref root 257 objectid 260 offset 65536 count 5
extent data backref root 258 objectid 265 offset 0 count 9
shared data backref parent 394985472 count 10
Block 394985472 might be leaf from root 257, and the item obejctid and
(file_pos - file_extent_item::offset) in that leaf just happens to be
260 and 65536 which is equal to the first extent data backref entry.
Before this patch, when we resolve backref:
root 257 objectid 260 offset 65536
we will add those refs in block 394985472 and wrongly treat those as the
refs we want.
Fix this by checking if the leaf we are processing is shared data
backref, if so, just skip this leaf.
Shared data refs added into preftrees.direct have all entry value = 0
(root_id = 0, key = NULL, level = 0) except parent entry.
Other refs from indirect tree will have key value and root id != 0, and
these values won't be changed when their parent is resolved and added to
preftrees.direct. Therefore, we could reuse the preftrees.direct and
search ref with all values = 0 except parent is set to avoid getting
those resolved refs block.
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7ac8b88ee668a5b4743ebf3e9888fabac85c334a upstream.
When resolving one backref of type EXTENT_DATA_REF, we collect all
references that simply reference the EXTENT_ITEM even though their
(file_pos - file_extent_item::offset) are not the same as the
btrfs_extent_data_ref::offset we are searching for.
This patch adds additional check so that we only collect references whose
(file_pos - file_extent_item::offset) == btrfs_extent_data_ref::offset.
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 344db93ae3ee69fc137bd6ed89a8ff1bf5b0db08 upstream.
The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.
In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.
This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e43 ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").
Fixes: 9721e709fa ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen <[email protected]>
Reviewed-by: Neal Cardwell <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
