Author	SHA1	Message	Date
Linus Torvalds	38c23685b2	ARM: SoC driver updates for 4.17 ... The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxiNzAAoJEGCrR//JCVInYhYP/2kPhc5t/kszA1bcklcbO9dY eX37Ra/RR4yQ5yeQZVIZ4UkUovxk9PmG2tM4K5oJaTDsz5pPEgavVOOr3sbfj6vb 4O9auTeysEQlHcbVdNFum0YS2gUY2YD7D12DTRorotLxCqod184ccWXq0XGfIWaY l3YRrcL/lPlqmyS3z/GNx9oNygOMUzEfXfIQYICyzHuYiLBUGnkKC1vIb+Hx1TDq Cxk++AUqH13Mss24O2A2QQh+oBHj2BybDLLqwcC5PSpsUbFrVCfzG54l43mig32T NOxV0Qnml2wAtU4H0QcgtSgwRimHD0YOiX8ssquvDDiqTqM5G+llSTGkEbYe+AUW 4GIZYoBOwGkfEXS+tyymHe9yfc5h1OLYAeFU1jRm723c7phanuu67rPn35YC8UMK zSql10JpkAGNzMikrxxb6wnis951w2UFlzhgZQ6ItA/nRq3l+oEQA0Qiljv965nz DVLsD5+gdhK6GBctkzlsD5HFn6GjM8JilnsOVPHD765nKnVBSxKiXRLV228XVug2 rChF1FhQqLnM54jCMqHZX5fS9SbSgtYswHqIXpVw6GmJkqq/Ly10yGR0vuWD+uyn BV7q5AKpGrwm6wZkMM2uZ1VdUtWzn856AbkqrvX/QhmJcX4McuqaLUrC8bSOj1ty KeVil0akq3nU+xHl5Ojs =Pmsx -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...	2018-04-05 21:29:35 -07:00
Linus Torvalds	167569343f	ARM: SoC platform updates for 4.17 ... This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm 4yH0jaykoHODGNLIt50f =HD9V -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...	2018-04-05 21:21:08 -07:00
Linus Torvalds	b240b419db	ARM: SoC device tree updates for 4.17 ... This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxjFeAAoJEGCrR//JCVInw2gQALS/sK83IJE0Ngw98Cko8fqn NnbaLaZybajRCdZfXFrIgyL1YijsK4eeniA6zXvFixctlx0FcH2Ep1merbFa52Il bZKDOeCr6JfSggk2pZvnC7efwAsc5qMmSGU7KgvUV9vgAXTXANdTlVttoBrZldvI baR5W34BjcXRvA14FyxUPiQgGiCft3rE2ZJA9CqJQ9W44vxnTpbcYpimwya8LWss hhbJ8P73HhVsKlwS4QXajpLJSo52VdhGDZCd/MwH1yWjzgQZ7O2ijSFz3jYmvdZf 1guE1FhcpHX8/0j1v5OqfEFAjaFUl+Fef11McUlGe4lVM2C47kuNEil//cb4pJ2j ipQ0qR26GkoBmoxSlt0cI9yUtSemTWzZZSLeTPNQGytb7hRNdR22xwf2vr9Eh6dB PMG2G0VXVp5Xuif+3iDLxFKiPsBsN49RGtqOj6p9eZhbTIRjgQ5671T3Kla0KRLH CFlWyYYrRqtUVeM3XSXmNQb9pyuCDqOlLyVngDbCuz4HIly3I2kgSYLTCFZx5FfT kkVbNy+cO/TOkX8w1P8XiRDGQ16YHQ5kjvy1mUPiPEnf70L2gD8HXWeVX1J2SXzF OoeNJTzON0cpvtUaM/4hsASi5mHz8rv8CTH8HUviRlXvSH/7JqlM2XqhWSVJ+gYZ S7/RgDEviOzsHBf/EMUN =7rHo -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits) arm: dts: modify Nuvoton NPCM7xx device tree structure arm: dts: modify Makefile NPCM750 configuration name arm: dts: modify clock binding in NPCM750 device tree arm: dts: modify timer register size in NPCM750 device tree arm: dts: modify UART compatible name in NPCM750 device tree arm: dts: add watchdog device to NPCM750 device tree arm64: dts: uniphier: add ethernet node for PXs3 ARM: dts: uniphier: add pinctrl groups of ethernet for second instance arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+ arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier arm: dts: armada-385-db-ap: use SPDX-License-Identifier arm: dts: armada-388-rd: use SPDX-License-Identifier arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier arm: dts: armada-370-db: use SPDX-License-Identifier arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs ...	2018-04-05 21:18:09 -07:00
Linus Torvalds	5414ab31b1	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input ... Pull input updates from Dmitry Torokhov: - new driver for PhoenixRC Flight Controller Adapter - new driver for RAVE SP Power button - fixes for autosuspend-related deadlocks in a few unput USB dirvers - support for 2nd wheel in ATech PS/2 mouse - fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370 - bunch of cleanups in various in PS/2 protocols - other assorted changes and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad Input: stmfts, s6sy761 - update my e-mail Input: stmfts - use async probe & suspend/resume to avoid 2s delay Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370 Input: xpad - add PDP device id 0x02a4 Input: alps - report pressure of v3 and v7 trackstick Input: pxrc - new driver for PhoenixRC Flight Controller Adapter Input: usbtouchscreen - do not rely on input_dev->users Input: usbtouchscreen - fix deadlock in autosuspend Input: pegasus_notetaker - do not rely on input_dev->users Input: pagasus_notetaker - fix deadlock in autosuspend Input: synaptics_usb - do not rely on input_dev->users Input: synaptics_usb - fix deadlock in autosuspend Input: gpio-keys - add support for wakeup event action Input: appletouch - use true and false for boolean values Input: silead - add Chuwi Hi8 support Input: analog - use get_cycles() on PPC Input: stmpe-keypad - remove VLA usage Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list Input: add RAVE SP Powerbutton driver ...	2018-04-05 13:21:57 -07:00
Linus Torvalds	e02d37bf55	sound updates for 4.17-rc1 ... This became a large update. The changes are scattered widely, and majority of them are attributed to ASoC componentization. The gitk output made me dizzy, but it's slightly better than London tube. OK, below are some highlights: - Continued hardening works in ALSA PCM core; most of the existing syzkaller reports should have been covered. - USB-audio got the initial USB Audio Class 3 support, as well as UAC2 jack detection support and more DSD-device support. - ASoC componentization: finally each individual driver was converted to components framework, which is more future-proof for further works. Most of conversations were systematic. - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek codecs, typically tablets and small PCs. - Fixes / cleanups for Samsung Odroid systems - Cleanups in Freescale SSI driver - New ASoC drivers: * AKM AK4458 and AK5558 codecs * A few AMD based machine drivers * Intel Kabylake machine drivers * Maxim MAX9759 codec * Motorola CPCAP codec * Socionext Uniphier SoCs * TI PCM1789 and TDA7419 codecs - Retirement of Blackfin drivers along with architecture removal. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlrF2gUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/ZLhAAvUgpOkpHRmvyXoqhWdG/FWWFWtoFrQaDZE5y NPcGHy/ZLuCXGL3Zpsm9lZqXd1sxRdsxF3hiWT0JqqC7oxs/oSOhSzf7w6P9ppW7 nxZKo4SCSQpmy0Y58QhwpXUkuGzRAOXcug39BNiAqxjtWPPNT8bUj/br3ApH9+90 Dtittl26Z1Eek1KwNJDMdJt8l5P4P5Ls44g/9Xwhgxk/P0nHmErNuUftlNc/65/b HdVgLSXVJbfJ9dLRjQC0yg7jPzSgSp5xssAkWGfPv8AMnM6ql7LWGO+6zOdVcOUo 0ipKJpZHUI/k1Uv4yBxI32GueOl/gH78M3iGv1CVe/jaC8g8XXA5GScnG41U1ZUO p9f78q8jk+O4uCDvbCvigw+iqb7Lm7ME0jNaQ6gZzZX2sDDBUBIYMS6W658pQfgT w00c73gm7J+MPv4FsVyyzZsmqyO/xE/1x9F2eGut67DbCKVcfQnyheYJq3Gt96qo tzvJ+cy3JxCfGn7Ngl2/i8jtHD6sGf1Pl3gOPk5DEN2qfuBy/vQ4W4TlJ1pOqGFG JjpUhEpvYhP/XPrFo970g2yYQq5VsjumQiHGxbD56qu4hrkPU3w92gYKNc0F689j QQRc8gyAvUp78ZletF4WYLf6H1yNmkP3ufhsuP1MQWuxRmTcxVtIRDU1PLAq5J8w 10mGs6s= =F3q1 -----END PGP SIGNATURE----- Merge tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became a large update. The changes are scattered widely, and the majority of them are attributed to ASoC componentization. The gitk output made me dizzy, but it's slightly better than London tube. OK, below are some highlights: - Continued hardening works in ALSA PCM core; most of the existing syzkaller reports should have been covered. - USB-audio got the initial USB Audio Class 3 support, as well as UAC2 jack detection support and more DSD-device support. - ASoC componentization: finally each individual driver was converted to components framework, which is more future-proof for further works. Most of conversations were systematic. - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek codecs, typically tablets and small PCs. - Fixes / cleanups for Samsung Odroid systems - Cleanups in Freescale SSI driver - New ASoC drivers: * AKM AK4458 and AK5558 codecs * A few AMD based machine drivers * Intel Kabylake machine drivers * Maxim MAX9759 codec * Motorola CPCAP codec * Socionext Uniphier SoCs * TI PCM1789 and TDA7419 codecs - Retirement of Blackfin drivers along with architecture removal" * tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits) ALSA: pcm: Fix UAF at PCM release via PCM timer access ALSA: usb-audio: silence a static checker warning ASoC: tscs42xx: Remove owner assignment from i2c_driver ASoC: mediatek: remove "simple-mfd" in the example ASoC: cpcap: replace codec to component ASoC: Intel: bytcr_rt5651: don't use codec anymore ASoC: amd: don't use codec anymore ALSA: usb-audio: fix memory leak on cval ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls ASoC: topology: Fix kcontrol name string handling ALSA: aloop: Mark paused device as inactive ALSA: usb-audio: update clock valid control ALSA: usb-audio: UAC2 jack detection ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams ALSA: pcm: Avoid potential races between OSS ioctls and read/write ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs. ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC ALSA: usb-audio: Add native DSD support for Luxman DA-06 ALSA: usb-audio: fix uac control query argument ASoC: nau8824: recover system clock when device changes ...	2018-04-05 10:42:07 -07:00
Linus Torvalds	ef1c4a6fa9	media updates for v4.17-rc1 ... -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaw1yeAAoJEAhfPr2O5OEVDDgQAIYpin6obedJOm7zIm741Q0S fS2FL2pygyvHlVtU20ERHgvM6aD5tujekpDM4+GNgnq0aAabxvqBvdohmHQjyVSw FgszgY6kQSnI8S4Oy9RB8H/MFRq7Wz9Qf+KmJh0SfuUoMzBe2A40yLjYQ+sAMJr9 mm0ijxxRpFYikVtIBgKDbjnx6wdkOs12M7YlJuI8N/tMBHMt+p2EfvqcX6GF725i sgLGcMsTJr1sUSyY8vnM2pAlKfZL2tZqigx5f9sB4UM7uHSw/oL/a/8I+t6Mju1X J1BD3L7UtTpwqO9sAR5BsJQ+0pAkXNOF+eLGs2p9rx4sO0DOLKoUptMI+YryvE86 /SOlTskSSAeX/rBFyZJw1zv0/9mdGrHoyCy0q/lfDkD/mQkrUJDDZ7GPLqZ9rLUe 2cXn1xMWB/soeR70oTyew0D2SZkp6y4DQr0Rwje7V8/SOWMmJvhaVIWhVIP9ZrS6 AvCS7WUYTTVIX+td2glnLkJ5SaXXJyRYv8Utp/TUrYvCFOX7wsk7F0pRY4PE4PeZ BL7Bl8H9l3HGWWhdqPvw+ETdJgcbq/IwVUcpuuEPjkhDZEqHz//vzwoPt1nT4v6M gfqfaW5LaYuj0MYYqyxZMDwP3FWk4SsQ0NZzmaFs+yfE17bcWUMuf3ZVJtjmLxzk RUo0E/7RZsrw7LkCy0KF =bzhS -----END PGP SIGNATURE----- Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new CEC pin injection code for testing purposes - DVB frontend cxd2099 promoted from staging - new platform driver for Sony cxd2880 DVB devices - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x, tw9910.c - removal of unused cx18 and ivtv alsa mixers - the reneseas-ceu driver doesn't depend on soc_camera anymore and moved from staging - removed the mantis_vp3028 driver, unused since 2009 - s5p-mfc: add support for version 10 of the MSP - added a decoder for imon protocol - atomisp: lots of cleanups - imx074 and mt9t031: don't depend on soc_camera anymore, being promoted from staging - added helper functions to better support DVB I2C binding - lots of driver improvements and cleanups * tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits) media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd) media: fimc-capture: get rid of two warnings media: dvb-usb-v2: fix a missing dependency of I2C_MUX media: uvc: to the right check at uvc_ioctl_enum_framesizes() media: cec-core: fix a bug at cec_error_inj_write() media: tda9840: cleanup a warning media: tm6000: avoid casting just to print pointer address media: em28xx-input: improve error handling code media: zr364xx: avoid casting just to print pointer address media: vivid-radio-rx: add a cast to avoid a warning media: saa7134-alsa: don't use casts to print a buffer address media: solo6x10: get rid of an address space warning media: zoran: don't cast pointers to print them media: ir-kbd-i2c: change the if logic to avoid a warning media: ir-kbd-i2c: improve error handling code media: saa7134-input: improve error handling media: s2255drv: fix a casting warning media: ivtvfb: Cleanup some warnings media: videobuf-dma-sg: Fix a weird cast soc_camera: fix a weird cast on printk ...	2018-04-03 17:16:59 -07:00
Linus Torvalds	5bb053bef8	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next ... Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...	2018-04-03 14:04:18 -07:00
Arnd Bergmann	7f95de5e4a	Reset controller changes for v4.17, part 2 ... This tag contains reset lookup support, similar to pwm lookups, for legacy non-DT platforms, a few new reset controls and a Kconfig fix for uniphier SoCs, as well as a new driver for the STM32MP1 peripheral reset controller. The reset lookups are merged from a separate, immutable branch, that may also be merged into the davinci tree. -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlq6UAwXHHAuemFiZWxA cGVuZ3V0cm9uaXguZGUACgkQUMKIHHCeYOuXDBAA0rkV2QOjJQEhpL/jWEukmrAi NtNeREToKjUwfkfZFrgdCRQjm5adz+qrXUuTOK6SeqRWdW3chfeNhJoAdpPH7p54 odAiqtAz/M5dwh6iy/VJZxFba6j9dJkTa29tKs93XKL0vjN4//AEYEuKF5HG70+E xm6V9ZnD4qPrCYuHZvQoiOeyrnxqaKWjRXLSAqHqv6hfg8OsJ9IRaC2SR1Asx/0A MkaAvLTEZj65xcA1WsOwKAtgcDDsyUt5VJcA3DW6v+YKoE59DVhlVR76dI2SijoG gkTOn/zCxHCVi3GjSpYRsE1ywey7XofCDiwtsV35FXIoGL3RkqcSWAwtWjrHsuHT 2PQ3QLQzqinyPU72iu+4b1lMKzT8aJh6w03ENxVvRDQNIBS7P9xMvOd5Wj45++QG Z5Xt23kMKFamMGSa6eD67ul17bnfjY2IZrQjWgsuIPec0eAJ1FsraTJ/zW4cKmEa FhW172r5udAlypV7lFdwuzYtQXuU4LaGQNoDjVgrGqhaz/TWMFtsOFvhmww76/jU JcmJxuqAyh0l9Iwh7icJo6gsTdW7dvbwv5wCrBEW4W53mscUOLUiPpKaExXWnkOU 4oi7D7dIWvV/rqMf5VBnQaZXYtPZegh97nRh9Etb5FcbhRCpDJjTp28ZagixqjiG 4U0AvT4sahcktL3Y3lw= =LU35 -----END PGP SIGNATURE----- Merge tag 'reset-for-4.17-2' of git://git.pengutronix.de/git/pza/linux into next/drivers Pull "Reset controller changes for v4.17, part 2" from Philipp Zabel: This tag contains reset lookup support, similar to pwm lookups, for legacy non-DT platforms, a few new reset controls and a Kconfig fix for uniphier SoCs, as well as a new driver for the STM32MP1 peripheral reset controller. The reset lookups are merged from a separate, immutable branch, that may also be merged into the davinci tree. * tag 'reset-for-4.17-2' of git://git.pengutronix.de/git/pza/linux: reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems	2018-03-28 17:02:22 +02:00
Arnd Bergmann	d45357e40e	arm64: tegra: Device tree changes for v4.17-rc1 ... Adds initial support for the P2972-0000 development board based on Tegra194 and enables the AHCI controller on Jetson TX1. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqr0SYTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUryD/0fakVwRpCnyRwlfe6hF2MJmpUPu8Ft K3VMcL+JW3fDpxS6NYfw7xaI0YiqXlmL/V/hDwmcI5LQVN/TmRxBg3811xxVYQy3 d6nnDvZPru8wLMooereHZjSdY/1yRx/DjzS2RHd622ZwV7FR/7KzsBOEELooNlKG c6HK/evO8Wr1QC1nsQnrCOtQm6cuw5nVTOSxh3tzHjsx/YEqZrqalTjD0temyvA4 vk/HrBwXQWS/3a7n6avCGxh3MW4K8zYgYw6E7w4GW3umeKu3kVht8LodqYl5B3Az 8cXmd5cWDgyR8A5O0OOX/7EAUBg/D2RxbUUCwThgh/NCbrm+LCeE7xNM39eBuIJW GLwsdsAih3svPIMYDF7IgEMlJ1+X8IE+AtDmBLbta0fsNljAsK30v/96/+llL579 S4sg3iphpe4Lzd7y0mLM8m5wRNCjaG/DbDYj+Xx0towtIm+UU6hf/G+MEUMTpC4W +ucGYzACguFOQNEPRvLptJxqqcEGz3Do3GaSpzdieWpibTm91Gfw/IfqdY8KYKy5 DYKMCVo7iYSs0SbvRg7T0nMYF2OnIHDWVFYP26bK3OaQtWaU7mdaA99Q5V7GNQvH pklUJvjV5igWQ2J56QHD0C642C133kPvcKWu2638GeVtUsL/PF+HHhZaKhODODN7 F/jibSvkt2wTxg== =u8uZ -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "arm64: tegra: Device tree changes for v4.17-rc1" from Thierry Reding: Adds initial support for the P2972-0000 development board based on Tegra194 and enables the AHCI controller on Jetson TX1. * tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable AHCI on Jetson TX1 arm64: tegra: Add SATA node for Tegra210 arm64: tegra: Add device tree for the Tegra194 P2972-0000 board arm64: tegra: Add Tegra194 chip device tree	2018-03-27 13:27:04 +02:00
Gabriel Fernandez	dae5af9762	dt-bindings: reset: add STM32MP1 resets ... This patch adds the reset binding entry for STM32MP1 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>	2018-03-27 10:44:03 +02:00
weiyi.lu@mediatek.com	1390515aed	dt-bindings: soc: update MT2712 power dt-bindings ... Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3) for MT2712 according to ECO design change. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>	2018-03-19 02:29:04 +01:00
Arnd Bergmann	fed925ea70	Merge tag 'imx-dt-newclk-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt ... Pull "i.MX device tree update with new clock for 4.17" from Shawn Guo: - Add CAAM and Keypad device node for i.MX7S/D SoC device tree. - Add clock support for i.MX7 SNVS RTC device. * tag 'imx-dt-newclk-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7s: add Keypad Port module ARM: dts: imx7s: add CAAM device node ARM: dts: imx7s: add snvs rtc clock clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock	2018-03-15 22:03:06 +01:00
Jeffy Chen	83fc580dcc	Input: gpio-keys - add support for wakeup event action ... Add support for specifying event actions to trigger wakeup when using the gpio-keys input device as a wakeup source. This would allow the device to configure when to wakeup the system. For example a gpio-keys input device for pen insert, may only want to wakeup the system when ejecting the pen. Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>	2018-03-14 10:13:22 -07:00
Hans de Goede	0f2d4f162f	ASoC: rt5651: move definitions of dt-binding constants to include/dt-bindings ... Move the definitions of constants used in the dt-bindings from include/sound/rt5651.h to include/dt-bindings/sound/rt5651.h. As dt-bindings headers may also be parsed by the dt-compiler, they cannot use enums, only defines, so this commit also changes the code declaring the constants to use defines. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>	2018-03-12 14:15:51 -07:00
Sean Wang	0c1a2c17f6	dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding ... Add relevant header files required for dt-bindings of SCPSYS power domain control for subsystems found on MT7623A SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> [mb: clean-up commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>	2018-03-11 23:42:49 +01:00
Mikko Perttunen	5425fb15d8	arm64: tegra: Add Tegra194 chip device tree ... Add the chip-level device tree, including binding headers, for the NVIDIA Tegra194 "Xavier" system-on-chip. Only a small subset of devices are initially available, enough to boot to UART console. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>	2018-03-08 14:31:13 +01:00
Patrice Chotard	f932423c6f	dt-bindings: mfd: Add STM32F7 SDMMC2 rcc entry ... STM32F769 SoC provides 2 SDMMC instances, add missing RCC SDMMC2 entry for it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>	2018-03-05 09:04:25 +01:00
Martin Blumenstingl	55af415b42	pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3 ... Meson8b is a cost reduced variant of the Meson8 SoC. It's package size is smaller than Meson8. Unfortunately there are a few key differences which cannot be seen without close inspection of the code and the public S805 datasheet: - the GPIOX bank is missing the GPIOX_12, GPIOX_13, GPIOX_14 and GPIOX_15 GPIOs - the GPIOY bank is missing the GPIOY_2, GPIOY_4, GPIOY_5, GPIOY_15 and GPIOY_16 GPIOs - the GPIODV bank is missing all GPIOs except GPIODV_9, GPIODV_24, GPIODV_25, GPIODV_26, GPIODV_27, GPIODV_28 and GPIODV_29 - the GPIOZ bank is missing completely - there is a new GPIO bank called "DIF" This means that Meson8b only has 83 actual GPIO lines. Without any holes there would be 130 GPIO lines in total (120 are inherited from Meson8 plus 10 new from the DIF bank). GPIOs greater GPIOZ_3 (whose ID is 83 - as a reminder: this is exactly the number of actual GPIO lines on Meson8b and also the value of meson8b_cbus_pinctrl_data.num_pins) cannot berequested. Using CARD_6 (which used ID 100 prior to this patch, "base of the GPIO controller was 382) as an example: $ echo 482 > /sys/class/gpio/export export_store: invalid GPIO 482 This removes all non-existing pins from to dt-bindings header file (include/dt-bindings/gpio/meson8b-gpio.h). This allows us to have a consecutive numbering for the GPIO #defines (GPIOY_2 doesn't exist for example, so previously the GPIOY_3 ID was "GPIOY_1 + 2", after this patch it is "GPIOY_1 + 1"). As a nice side-effect this means that we get compile-time (instead of runtime) errors if Meson8b .dts uses a pin that only exists on Meson8. Additionally the pinctrl-meson8b driver has to be updated to handle this new GPIO numbering. By default a struct meson_bank only handles GPIO banks where the pins are numbered consecutively because it calculates the bit offsets based on the GPIO IDs. This is solved by taking the original BANK() definition and splitting it into consecutive subsets (X0..11 and X16..21). The bit offsets for each new bank includes the skipped GPIOs (the definition of the "X0..11" bank is identical to the old "X" bank apart from the "last IRQ" field, the definition of the new, split "X16..21" bank takes the original "X" bank and adds 16 - the start of the new split bank - to the "first IRQ", pullen bit, pull bit, dir bit, out bit and in bit). Commit 984cffdeae ("pinctrl: Fix gpio/pin mapping for Meson8b") fixed the same issue by setting "ngpio" (of the gpio_chip) to 130. Unfortunately this broke in db80f0e158 ("pinctrl: meson: get rid of unneeded domain structures"). The solution from this patch was considered to be better than the previous attempt at fixing this because it provides compile-time error checking for the GPIOs that exist on Meson8 but don't exist on Meson8b. The following pins were tested on an Odroid-C1 using the sysfs GPIO interface checking that their value (high or low) could be read: - GPIOX_0, GPIOX_1, GPIOX_2, GPIOX_3, GPIOX_4, GPIOX_5, GPIOX_6, GPIOX_7, GPIOX_8, GPIOX_9, GPIOX_10, GPIOX_11, GPIOX_18, GPIOX_19, GPIOX_20, GPIOX_21 - GPIOY_3, GPIOY_7, GPIOY_8 (some of these had to be pulled up because they were low by default, others were high by default so these had to be pulled down) Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2018-03-02 10:46:42 +01:00
Sean Wang	536836d32c	dt-bindings: pinctrl: mediatek: add bindings for I2C2 and SPI2 on MT7623 ... Add missing pinctrl binding about I2C2 and SPI2 which would be used in devicetree related files. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2018-03-02 08:44:24 +01:00
Stefan Agner	1691cc375a	clk: imx: imx7d: add the Keypad Port module clock ... According to the i.MX7D Reference Manual, the Keypad Port module (KPP) requires this clock gate to be enabled. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>	2018-02-28 14:43:00 +08:00
Rui Miguel Silva	baf15cbf54	clk: imx7d: add CAAM clock ... Add CAAM clock so that we could use the Cryptographic Acceleration and Assurance Module (CAAM) hardware block. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: "Horia Geantă" <horia.geanta@nxp.com> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>	2018-02-28 09:17:41 +08:00
Tim Harvey	10c1d542c7	media: dt-bindings: Add bindings for TDA1997X ... Define the device tree bindings for the TDA1997X. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: make a proper commit message] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>	2018-02-22 12:45:42 -05:00
Anson Huang	d931ba53e0	clk: imx: imx7d: add the snvs clock ... According to the i.MX7D Reference Manual, SNVS block has a clock gate, accessing SNVS block would need this clock gate to be enabled, add it into clock tree so that SNVS module driver can operate this clock gate. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>	2018-02-22 17:46:58 +08:00
Jacopo Mondi	a527709b78	soc: renesas: rcar-sysc: Add R-Car M3-N support ... Add support for R-Car M3-N (R8A77965) power areas. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>	2018-02-21 22:51:02 +01:00
Sergei Shtylyov	7755b40d07	dt-bindings: power: add R8A77980 SYSC power domain definitions ... Add macros usable by the device tree sources to reference R8A77980 SYSC power domains by index. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>	2018-02-19 20:50:44 +01:00
Wadim Egorov	9708fb630d	net: phy: dp83867: Add binding for the CLK_OUT pin muxing option ... The DP83867 has a muxing option for the CLK_OUT pin. It is possible to set CLK_OUT for different channels. Create a binding to select a specific clock for CLK_OUT pin. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>	2018-02-14 15:33:43 -05:00
Linus Torvalds	8578953687	MIPS changes for 4.16 ... These are the main MIPS changes for 4.16. Rough overview: - Basic support for the Ingenic JZ4770 based GCW Zero open-source handheld video game console - Support for the Ranchu board (used by Android emulator) - Various cleanups and misc improvements Fixes: - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9) - Fix vmlinuz default build when ZBOOT selected - Fix clean up of vmlinuz targets - Fix command line duplication (in preparation for Ingenic JZ4770) Miscellaneous: - Allow Processor ID reads to be to be optimised away by the compiler (improves performance when running in guest) - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to disable on generic platform with Ranchu board support - Add helpers for assembler macro instructions for older assemblers - Use assembler macro instructions to support VZ, XPA & MSA operations on older assemblers, removing C wrapper duplication - Various improvements to VZ & XPA assembly wrappers - Add drivers/platform/mips/ to MIPS MAINTAINERS entry Minor cleanups: - Misc FPU emulation cleanups (removal of unnecessary include, moving macros to common header, checkpatch and sparse fixes) - Remove duplicate assignment of core in play_dead() - Remove duplication in watchpoint handling - Remove mips_dma_mapping_error() stub - Use NULL instead of 0 in prepare_ftrace_return() - Use proper kernel-doc Return keyword for __compute_return_epc_for_insn() - Remove duplicate semicolon in csum_fold() Platform support: Broadcom: - Enable ZBOOT on BCM47xx Generic platform: - Add Ranchu board support, used by Android emulator - Fix machine compatible string matching for Ranchu - Support GIC in EIC mode Ingenic platforms: - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780) - Add Ingenic JZ4770 CGU clocks - General Ingenic clk changes to prepare for JZ4770 SoC support - Use common command line handling code - Add DT vendor prefix to GCW (Game Consoles Worldwide) Loongson: - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms - Drop 32-bit support for Loongson 2E/2F devices - Fix build failures due to multiple use of "MEM_RESERVED" -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlp64ZUACgkQbAtpk944 dnrXrg//UPWeZMye/uHw0eEeJJjybyA0IWpJ6M94gbHxpduhQsjYU3CR9U4ZBmhs feY53dahh0RCR0k28EF8DEPkoUbGFKmyYCnvqAuatq1XOjAZtlgS9+VVzbK+Iswm XkZD1MBoZ49o0meyjQrH/2Ri/t6tHuzo0G2WtRJ8FnVruN9ymG6D5pR4Y31gDucb 6JkTXjNfRJIKd0qJgP+c3HdlKE7jlnCTJnzHdA+5FbZVwKbm2/6KxbQo5Gc1BXJX 4j7I4nJ0FIz0cB6fHbcccFSW9w3lPa9bQ4XpYPJYE6a36QldFvMWHRxvI6rxrACN 5mPqIB9uqvtW8sdUbJtNRXFlNnm8XZzvsNqP6WxGQPW70+q2camni9W/gC1ifQsF +uVV54yj3Ky8xQNbbpfbDp/tFXRuLtj3DV4/a3dwA5J0YGEuMn1zzV5WTTzymFVn 3NKl62LDUlzBNw0d1lUPMY6P1oKcNnRhLxBq0cxaB7AdOLF0jlCQ/wYUhXPpblj6 CQB4cupR4IMvL7FZ1RS98e1RHaF8mXpaZBnGXT251DxZEre9OXCJxDdzqemedTVi SaCcvQqApCQD8OihL+wHZLew8Vp4EvwGAa++Evu/Ot4rWjY/9MGLtewYk8jkOEf6 qk30dDn86ou29HNwpzfWadIq5Zew+QftifGOzTcuzgrJXXt+jH8= =7iwT -----END PGP SIGNATURE----- Merge tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.16. Rough overview: (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source handheld video game console (2) Support for the Ranchu board (used by Android emulator) (3) Various cleanups and misc improvements More detailed summary: Fixes: - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9) - Fix vmlinuz default build when ZBOOT selected - Fix clean up of vmlinuz targets - Fix command line duplication (in preparation for Ingenic JZ4770) Miscellaneous: - Allow Processor ID reads to be to be optimised away by the compiler (improves performance when running in guest) - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to disable on generic platform with Ranchu board support - Add helpers for assembler macro instructions for older assemblers - Use assembler macro instructions to support VZ, XPA & MSA operations on older assemblers, removing C wrapper duplication - Various improvements to VZ & XPA assembly wrappers - Add drivers/platform/mips/ to MIPS MAINTAINERS entry Minor cleanups: - Misc FPU emulation cleanups (removal of unnecessary include, moving macros to common header, checkpatch and sparse fixes) - Remove duplicate assignment of core in play_dead() - Remove duplication in watchpoint handling - Remove mips_dma_mapping_error() stub - Use NULL instead of 0 in prepare_ftrace_return() - Use proper kernel-doc Return keyword for __compute_return_epc_for_insn() - Remove duplicate semicolon in csum_fold() Platform support: Broadcom: - Enable ZBOOT on BCM47xx Generic platform: - Add Ranchu board support, used by Android emulator - Fix machine compatible string matching for Ranchu - Support GIC in EIC mode Ingenic platforms: - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780) - Add Ingenic JZ4770 CGU clocks - General Ingenic clk changes to prepare for JZ4770 SoC support - Use common command line handling code - Add DT vendor prefix to GCW (Game Consoles Worldwide) Loongson: - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms - Drop 32-bit support for Loongson 2E/2F devices - Fix build failures due to multiple use of 'MEM_RESERVED'" * tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits) MIPS: Malta: Sanitize mouse and keyboard configuration. MIPS: Update defconfigs after previous patch. MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead MIPS: Generic: Support GIC in EIC mode MIPS: generic: Fix Makefile alignment MIPS: generic: Fix ranchu_of_match[] termination MIPS: generic: Fix machine compatible matching MIPS: Loongson fix name confict - MEM_RESERVED MIPS: bcm47xx: enable ZBOOT support MIPS: Fix trailing semicolon MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers. MIPS: MSA: Update helpers to use new asm macros MIPS: XPA: Standardise readx/writex accessors MIPS: XPA: Allow use of $0 (zero) to MTHC0 MIPS: XPA: Use XPA instructions in assembly MIPS: VZ: Pass GC0 register names in $n format MIPS: VZ: Update helpers to use new asm macros ...	2018-02-07 11:22:44 -08:00
Linus Torvalds	ef991796be	This is the bulk of pin control changes for the v4.16 kernel cycle: ... Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJadGEKAAoJEEEQszewGV1zA4QQALs8edxhv4qV5vm50mTdrO3n QtRhJNb53j6MIKtjFnazMvh6MXRIP+08SyX9sDLi5AxINIVuyQh3mrcB6Zc9zN58 +6jFFOIbfm5E8by4n3wnKm3F/WAbNBZph9eT2Rn3cDv9o9hQbyNJ50sQkQMCjd9X WGR353c3OL4zb3vU8t72G/RPYUY1w1SkG9bGzRuSif8LawDcN6v6MMo2XhZA6RqM 3qYIG29vJ1n0weggUIBeSAJIzk4eMwcoWCbVWxhns5JGxw5VPES1zbSp1D+mbzRC 01i5Pt/gD+cWN/Kk/zKIMo1OqLAl+uLr6hzepj6W+5wu9CcQz/BgvRx7HUqnqgyh S8cN4AOgWmW+T75pHypd1WVic3q0RCXkFY8jjHpCATDY+Z+js0lZRs3y4DBiJ2ys DMVBeumDINKqaZ6aLH6lVkm+SxXOUy143arQQIzi0/F7fAp68i+9ofIO8B5smEmd 0S+3sT0sO5QXVgZJ0t0iGUUG5irXi8XtF5qvRmuFZUe0OLGgKX20oCdC0pH0WU4M OZO1Bvb8vmn1tddogO2WlHeg6amWdwxtDuBsLRO3YILLu3jwPjhNqNmErXzXEmWt TY9l2M1uQmoJibNpmTjOzSfj4OtUHMwkDrFRJHAcUPcKwdEy4MyzFL16ATnIwgY9 AmyMLNWJd8Wazgc6BK6w =gLY/ -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...	2018-02-02 14:22:53 -08:00
Linus Torvalds	3879ae653a	The core framework has a handful of patches this time around, mostly due ... to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJac5vRAAoJEK0CiJfG5JUlUaIP/Riq0tbApfc4k4GMvSvaieR/ AwZFIMCxOxO+KGdUsBWj7UUoDfBYmxyknHZkVUA/m+Lm7cRH/YHHMghEceZLaBYW zPQmDfkTl/QkwysXZMCw9vg4vO0tt5gWbHljQnvVhxVVTCkIRpaE8Vkktj1RZzpY WU/TkvPbVGY3SNm504TRXKWC9KpMTEXVvzqlg6zLDJ/jE7PGzBKtewqMoLDCBH2L q6b50BSXDo2Hep0vm6e5xneXKjLNR4kgN4PkbM4Yoi4iWLLbgAu79NfyOvvr/imS HxOHRms9tejtyaiR6bQSF0pbLOERZ3QSbMFEbxdxnCTuPEfy3Nw/2W7mNJlhJa8g EGLMnLL4WdloL4Z83dAcMrj9OmxYf7Yobf5dMidLrQT5EYuafdj0ParbI8TQpWSB eTqaffSUGPE/7xuKouYBcbvocpXXWCcokrP/mEn3OEHXkIeeut1Jd3RmEvsi3gtJ pNraJTIpvt4c05rj6yLUOhWfyqlA+fH3p4Fx3rrH1tmKEiG+lrhKoxF26uALZe0V OvarhG+LPIE10pCIYlQjZjQVnYLGCxsGAIoK1uz7VYvFPh2T0cxQlzzeqFgrlTyN 32hMj3LhkQw82FG9xZqjTX1935R35mySRlx63x7HStI1YFief2X9+RHjJR/lofG0 nC0JWTp5sC/pKf54QBXj =bGPp -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...	2018-02-01 16:56:07 -08:00
Linus Torvalds	fe53d1443a	ARM: SoC driver updates for 4.16 ... A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/ b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8 xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy /PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I// 68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa 5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd +ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco 0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis IDVC/QWkb3u85wK20Vc1 =yz0k -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ...	2018-02-01 16:35:31 -08:00
Linus Torvalds	537433b624	ARM: SoC device tree updates for 4.16 ... We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: S700 Soc and CubieBoard7 development board Allo.com Sparky Single-board-computer Allwinner: Orange Pi R1 development board Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: Axentia Nattis/Natte digital signage sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: SolidRun Humminboard2 development board Variscite DART-MX6 SoM and Carrier-board Technologic TS-4600 and TS-7970 development board Toradex Colibri iMX7D SoM board v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: Moxa UC-8410A Series industrial computer Gemini: D-Link DNS-313 NAS enclosure OMAP: LogicPD OMAP35xx SOM-LV devkit LogicPD OMAP35xx Torpedo devkit Renesas: r8a77970 (V3M) Starter Kit board r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) Aspeed clk controller support Freescale LS1088A, LS1021A device support Gemini Ethernet, PCI, TVE, panel Keystone gpio, qspi, more uarts Mediatek cpufreq, regulator, clock, reset Marvell thermal, cpufreq, nand Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu Rockchip Mipi, GPU, display Samsung Exynos5433 PMU, power domain, nfc Spreadtrum: sc9860 clocks Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ... -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJac0fiAAoJEGCrR//JCVInGUYP/ikTcjrmtQxmMINdsy88gmN3 lPk3jGoViyRzc9Y6hGUUXn1YNdK8+IqRkqLnhtVX3cOLS5pP2HwsvSgPmSSB3eQe NOhXUNRQaTbeS/eBGZxJbxEKSowQHU+43M2kRNQOht7UQzS8NnBj/1RGaxcFyNSw gIixWDZLgVTNCSloPaSrZmiwSa7rSM2q0ncBzzeafAZiTRNeOb6IUpnqu/n0Qnot er6VoEyxp6ThFqRB7O8bCAIwgqlyB9xSGBPNR/JI0e0xXo3KVE/2AjHYDHVP/Ttx X8vtb3m+RED7tX4oCmlrHb1SAAKpNi1Vzdg4PxmKCa7yb5xPog7OEr3rnpijzCL0 y8IJLlVSPyx31yB7mIIzCjrcISrT7tOXp0ha88/NgNsGXw5Ln0GVEqTkmSrz/JWo z1G2tNwnstS64KK+chHOZfUto4Rzbrpmr9L1ziKIpSQtiNyOmiSu1c3EjHim7x4I Mfiv6+8J71faUYuKVK1oaX0gi43oSZHu4NuniQy8dg/OIpgPpHHpG1qCyAzgC6Pa r1Am2w33CXrJI78b4zG2pIDx0HghIjFUtjX9tijoFiMs1EZgbV6cJ2meep6Sy+XV RBxHXPU8obdcuBfhgjEygwLI0HSe0R78B15qPP/SNxAFeAvE950xfPrGAoZg7qo/ o6B2iQSfsYQJbD8rUHaA =qN1F -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...	2018-02-01 16:07:54 -08:00
Stephen Boyd	c43a52cfd2	Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-allwinner' into clk-next ... * clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO()	2018-01-26 16:43:39 -08:00
Stephen Boyd	4d1d13a5ae	Merge branches 'clk-remove-asm-clkdev', 'clk-debugfs-fixes', 'clk-renesas' and 'clk-meson' into clk-next ... * clk-remove-asm-clkdev: clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks arch: Remove clkdev.h asm-generic from Kbuild clk: Prepare to remove asm-generic/clkdev.h blackfin: Use generic clkdev.h header * clk-debugfs-fixes: clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: Improve flags doc for of_clk_detect_critical() * clk-renesas: clk: renesas: r8a7796: Add FDP clock clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend clk: renesas: mstp: Keep wakeup sources active during system suspend clk: renesas: r8a77970: Add LVDS clock * clk-meson: clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: meson-axg: make local symbol axg_gp0_params_table static clk: meson-axg: fix return value check in axg_clkc_probe() clk: meson: mpll: use 64-bit maths in params_from_rate clk: meson-axg: add clock controller drivers clk: meson-axg: add clocks dt-bindings required header dt-bindings: clock: add compatible variant for the Meson-AXG clk: meson: make the spinlock naming more specific clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks clk: meson: gxbb: fix wrong clock for SARADC/SANA	2018-01-26 16:43:32 -08:00
Stephen Boyd	21170e3bda	Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' and 'clk-qcom-ipq8074' into clk-next ... * clk-spreadtrum: clk: sprd: add clocks support for SC9860 clk: sprd: Add dt-bindings include file for SC9860 dt-bindings: Add Spreadtrum clock binding documentation clk: sprd: add adjustable pll support clk: sprd: add composite clock support clk: sprd: add divider clock support clk: sprd: add mux clock support clk: sprd: add gate clock support clk: sprd: Add common infrastructure clk: move clock common macros out from vendor directories * clk-mvebu-dvfs: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS clk: mvebu: armada-37xx-periph: cosmetic changes * clk-qoriq: clk: qoriq: add more divider clocks support * clk-imx: clk: imx51: uart4, uart5 gates only exist on imx50, imx53 * clk-qcom-ipq8074: clk: qcom: ipq8074: add misc resets for PCIE and NSS dt-bindings: clock: qcom: add misc resets for PCIE and NSS clk: qcom: ipq8074: add GP and Crypto clocks clk: qcom: ipq8074: add NSS ethernet port clocks clk: qcom: ipq8074: add NSS clocks clk: qcom: ipq8074: add PCIE, USB and SDCC clocks clk: qcom: ipq8074: add remaining PLL’s dt-bindings: clock: qcom: add remaining clocks for IPQ8074 clk: qcom: ipq8074: fix missing GPLL0 divider width clk: qcom: add parent map for regmap mux clk: qcom: add read-only divider operations	2018-01-26 16:41:47 -08:00
Arnd Bergmann	6ab1e867ac	Few omap interconnect dts fixes for v4.16 merge window ... Now that we have the dts clocks for the clkctrl clock and the interconnect binding, we need to update the existing ti-sysc users according to the binding to make it usable for drivers. Apologies for not being able to send this earlier but it took me few revisions to get the smartreflex changes right and tested with yet to be posted patches to make smartreflex probe with dts and I wanted to have it sit in next for a while to make sure we're not introducing regressions for legacy platform data based booting. Note that this is based on a merge with commit 20a2742e57 ("dt-bindings: ti-sysc: Update binding for timers and capabilities") to avoid a merge conflict with the binding changes. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlpiDqURHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMmOg/9Hr2lan1ZTqNBTgBixbcxj+gmovVlwjKa 1tXtNlkTco17BjEyDmKb3dzS16zT5YXv27RrIjCukQsKvVr2HOW4EnJ6iPPP6Y97 bp3Tx3ejqzoUNCcTUII4nWLZKaFXZ6C27sDrylEovsDJR9InocNYk5RhYDuPKPAw 3YaG/+QuRLc98YzjPGbSzUZws4EDUJhfHBqsVBwr4UFNJblRJe65kTFeH7BkZ9F8 eXenpUcS1JQMjMARR7aZck+7/3jyjtqWft1GjFWUto2kfx0tA8Ay4SyOqJxS9REa 0TK/Qdik2KDqP3wgBy7FLgXakmMOWttDFB5LUsWZbSyIO9vTgZj4RimSRgctfMxx XbyiJKovlNq1uDIPv3z/rHOala3WifNnzpf0m9izE5kbMW7vdHVycwzmJ2/Ushz6 rV4pqYVZ7o+SSnYRoiSdEQ/MMgMuypuL1+mhpIHL/rh+vCBGVaUfKRkrIcFwfujL H0nhB4PG8DEyOoc6dr8X317jUCgj0X6xTBO8jJUhT5R8tMHuKjqSSAq1QKCL7q5K /tvjkE4fEIs+Hr0bSkBZ+Jd/llWZrmkD7a1etJtw5WbRnPROYYRsb0PeNDFWTtOF nw/S4YF1F3k6BzOQobH2BjkXOCTJD1FhnfH7hmTLJ3ZReyQLafKFu2DHdje8GyFm XjGUuctAC24= =oKRR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.16/dt-clk-dts-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Few omap interconnect dts fixes for v4.16 merge window" from Tony Lindgren: Now that we have the dts clocks for the clkctrl clock and the interconnect binding, we need to update the existing ti-sysc users according to the binding to make it usable for drivers. Apologies for not being able to send this earlier but it took me few revisions to get the smartreflex changes right and tested with yet to be posted patches to make smartreflex probe with dts and I wanted to have it sit in next for a while to make sure we're not introducing regressions for legacy platform data based booting. Note that this is based on a merge with commit 20a2742e57 ("dt-bindings: ti-sysc: Update binding for timers and capabilities") to avoid a merge conflict with the binding changes. * tag 'omap-for-v4.16/dt-clk-dts-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance dt-bindings: ti-sysc: Update binding for timers and capabilities	2018-01-22 12:36:57 +01:00
Paul Cercueil	b28a4b8eb9	dt-bindings: clock: Add jz4770-cgu.h header ... This will be used from the devicetree bindings to specify the clocks that should be obtained from the jz4770-cgu driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18481/ Signed-off-by: James Hogan <jhogan@kernel.org>	2018-01-18 22:05:42 +00:00
Tony Lindgren	bcc8d312de	Merge commit '20a2742e57' into omap-for-v4.16/dt-clk	2018-01-12 15:15:50 -08:00
Olof Johansson	ba05173afe	Another round of 64-bit DT changes for the new Amlogic SoCs. These ... include IR, SPI and ethernet MAC support for the new AXG family SoCs. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlpQC6wACgkQWTcYmtP7 xmVazBAAh/riNhKvUEoHCa1TQ8f0ELfGkZ7ckOBtTEBE9DoQQXZ08jU+LwEEy1N3 /5Uby3lquAYZiJzMuXfaJ63V+07OzIDt9hYzFBToMPf2ZLxSyGS8ZTWsUveBRXep tAY8ETtK8u3tq1pQH0A5lGc84yR8MM74We91GwuCA4S6whYqVbO1dInSb0mVqX50 vVKChc+jUgXwy4zaazgSUKcjZmexSCF7zA9ZXnGM3wg3s4K3HhzLZwCm30GU30mC Of5uCT02cR+HkRC1fDfo3mY9oRr19krYz9hJIsMk3mnmQS0XeI+HJ1DX+5K8l4YP 2ayVueBCLvqG7a1T4MLV6Hb7B1//Ejz6dT6UfTSSQszKXA3FQKIER7vt4Hg9IcCW rH5hXnPCko5yfjMpym3yr4+97fi6U1iJccc+DYRs0dq1Wrth40BwZH6tCrQVHfOQ jY6c2Ha5GDPTHbsW39vb7JvsFGYN2wlmmC1ThqG4e9kF8l1ZW+m433dJOicWMk2m 55SqCkbmkboVy9bYC6Tgrx6/KAa6vqMK0oXHADSJgNeccEZZeiTttlVwAiF9b1/f 1umUwKSfRhAvtvHD+ynoZIQ64oEnWGeGyc5EEJIdY+q7T6csT2E+pi75+y4q6jI2 xMTuK5iwXNr7PF612Tmr5NMaB+59Abdshp9IXxsNDPJiNBTLagA= =lk2H -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Another round of 64-bit DT changes for the new Amlogic SoCs. These include IR, SPI and ethernet MAC support for the new AXG family SoCs. * tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-axg: enable ethernet for A113D S400 board ARM64: dts: meson-axg: add ethernet mac controller ARM64: dts: meson-axg: add the SPICC controller ARM64: dts: meson-axg: enable IR controller arm64: dts: meson-axg: switch uart_ao clock to CLK81 clk: meson-axg: add clocks dt-bindings required header dt-bindings: clock: add compatible variant for the Meson-AXG Signed-off-by: Olof Johansson <olof@lixom.net>	2018-01-11 16:50:50 -08:00
Arnd Bergmann	b55eb1ae91	ASPEED device tree updates for 4.16 ... Clock driver support: Rework all platforms to use proper clock bindings. Linux should now boot upstream kernels on ast2400 and ast2500 platforms without out of tree patches. New systems: Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 We also see updates to the Palmetto and Romulus systems to bring them in line with the functionality of those above. The systems take advantage of recently added drivers for LPC Snoop device and the PWM/Tachometer fan controller. OpenBMC flash layout: The flash layout used OpenBMC systems is added and the device trees now use it. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJaSxoRAAoJEGt2WQeBR3CeiPgP/iBQ9qidGwAAGEAeg2UDnM6u 5oyFj6oMEE7oifUdCxgwWUv9S4TJqev7ux5vsp8d5iqd7bTmxTexRoAbhsADOnxz UlCibUVQm6ai5tDe1e9cSVtylo08PYi9yafLyQ37DPsvbkj+HrUN5RT0VXYKDMKL zV0X5jAZ49AAbekAGEFXIZsqFz9vEL2Z/6a8zHl2igRd/rlwLtMUdqeRdZKYIUJu SFPa7OCTKUFX44tD8tUh+VUabOHjgGM4ObeKm6ePAAtVnZ/fkaVM3wna7p1iCnJt o+6ZD3wnrDvfK8hNN+fdV7i4060B3G6CLjBsoJLWUl2/DEOedfW067vr1o8EvkYX jZvILGwAY7P5e6Y/7ugb46KKk/X/J4ViunPpjbzA/vLXpo7oafKF1DlzAa4jNkoT n/VyYu6Q1Xzh/axa7XUeqZIbBqzwuhSVA1NLrCwghSg/GPYHM4OyzjIunfuLlHSR 6Z1yy4KSmDDDHJx3gAMcxyBEVPm0g7d82e/OZDzaaapuKiFzSvH1OPYaK45944hn 9JspNS6zpGzUBpnMRfYCL76+UDOKugg6Gdctlj6A2BOHd+bRAxVeN9R+jZe7q/0w kNgySXI27rnZbc9nSNPDj2epm6DcQZwgq0kQUS07avrI4kccj8Lq0dDDlybePwCB 2T0s8+XhGiPSPht6W1jw =H9im -----END PGP SIGNATURE----- Merge tag 'aspeed-4.16-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt Pull "ASPEED device tree updates for 4.16" from Joel Stanley: Clock driver support: Rework all platforms to use proper clock bindings. Linux should now boot upstream kernels on ast2400 and ast2500 platforms without out of tree patches. New systems: Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 We also see updates to the Palmetto and Romulus systems to bring them in line with the functionality of those above. The systems take advantage of recently added drivers for LPC Snoop device and the PWM/Tachometer fan controller. OpenBMC flash layout: The flash layout used OpenBMC systems is added and the device trees now use it. * tag 'aspeed-4.16-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed-evb: Add unit name to memory node ARM: dts: aspeed-plametto: Add flash layout and fix memory node ARM: dts: aspeed-romulus: Update Romulus system ARM: dts: aspeed: Add Qanta Q71L BMC machine ARM: dts: aspeed: Add Ingrasys Zaius BMC machine ARM: dts: aspeed: Add Witherspoon BMC machine ARM: dts: aspeed: Sort ASPEED entries in makefile ARM: dts: Add OpenBMC flash layout ARM: dts: aspeed: Update license headers ARM: dts: aspeed: Remove skeleton.dtsi ARM: dts: aspeed: Add LPC Snoop device ARM: dts: aspeed: Add PWM and tachometer node ARM: dts: aspeed: Add clock phandle to GPIO ARM: dts: aspeed: Add flash controller clocks ARM: dts: aspeed: Add watchdog clocks ARM: dts: aspeed: Add MAC clocks ARM: dts: aspeed: Add proper clock references ARM: dts: aspeed: Add LPC and child devices dt-bindings: gpio: Add ASPEED constants dt-bindings: clock: Add ASPEED constants Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2018-01-05 17:06:04 +01:00
Arnd Bergmann	c8ac0b10fd	Reset controller changes for v4.16 ... - Fix device_reset_optional to be really optional - Header clean up: includes, warnings, and deprecated calls. - Add driver and bindings for the Meson-AXG SoC reset controller -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlpLODAXHHAuemFiZWxA cGVuZ3V0cm9uaXguZGUACgkQUMKIHHCeYOtW4xAA3cW+A5m80FNxJEOH1fT6UINp FmFBl1tkaTjM4jVOtYRGD6qzfd+Tp6aGttid8IBj+b1VE6uDBpIt1M+uRobLbpRr XXwlYE5FZLHj2WlXR/dPheB55BnJF06Q3ieHI2QbEU+z2bExKMMj+9wgkwoWSgt/ 5Z6FU849aU8TPEps8z/YmTT+RlES+KUe8vX4wWvaE8Jle99HLOeIfkZtsYRPVdEB +DY2lZbV4eRGDL0GEtCiNY1csz2joM5NLD2xrIQ03TxcRI7wgrcLjjfj+ROfT2rt xPkWdfLpuzm2sH2VQyGbmenjA8je+q6yWIbQiUjdEPl5urz+ZLwbLr+IiKX96ARM aaVN8EehJm3OiklKT6u1JPOj8FZpsqpMLk8xfP1bxZMV+BHFbhdIaYnVt+7RGky6 A6jfEcM8oXcgvb0AO4bGo3w3TIqdXX2zmL5PlG6RnzV8RbWwPfJO2DHKJq+Cppqr S07TBKes1zXpDtZqxW56Nd1Xnfjd39cDZGoWKqW1e8V2v8Pc6OTuCR3UlTer5mg5 WgP2KDI6w55PiSHFW9s4sjGweDbzqccCo8JLaggn4QxDD2/JKUPFK1Xvd2+X77rC iJW1hDMPP4od3uOBuI2ze8KKK+BeNUEl86Dbdd3CzU+Nt6niNfF1xK7lg9pb5Pud YGo+QVAdExV0mFJaCvE= =Ks60 -----END PGP SIGNATURE----- Merge tag 'reset-for-4.16' of git://git.pengutronix.de/git/pza/linux into next/drivers Pull "Reset controller changes for v4.16" from Philipp Zabel: This adds Meson-AXG reset support and fixes a few issues with the reset include header: device_reset_optional is fixed to be really optional, unused headers are pruned, and useless warnings and deprecated API calls are removed. * tag 'reset-for-4.16' of git://git.pengutronix.de/git/pza/linux: reset: meson-axg: add compatible string for Meson-AXG SoC dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller reset: remove reset_control_get(_optional) reset: minimize the number of headers included from <linux/reset.h> reset: remove remaining WARN_ON() in <linux/reset.h> reset: make device_reset_optional() really optional	2018-01-05 12:25:04 +01:00
Olof Johansson	38b45e5186	Second set of device tree changes for omaps for v4.16 merge window ... This branch mostly configures more hardware support: - Clean-up dts files to remove leading 0x and 0s from binding notation to remove more dtc compiler warnings - A series of am437x updates for backlight, to fix inverted pad pull macro, and to configure power management related OPPs - Configure n950 and droid 4 command mode LCD panels - Updates to pandora and gta04 LCD panels - Add support for am574x-idk - A series of changes to configure more dra7 related PCIe features - A series of fixes for am335x-boneblue for WLAN, UARTs and CAN configuration - A series of changes to configure dra7 OPPs and VDD supplies -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlo+gnMRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMTjhAAiY4YnmZRR/6eMT8mwgSruVUK7oefaDk/ Ul+Aw/Op/e5kHepJJivYxdUMabjMfEJqU6EExhKwl1MYk+iKB9L6MX7OUSqXRy9k PXYBWhGbN7ulV9P9424y+ftsuz3SurYYY0mdbpWdxCtB0ntMUlJ5vTJZAVcyHqbe RdQZYHh49j+HGlX+GD8vGfHjfOfQ8V++K8YQwis26w6CSjzN/jclcNBqK2U3MVdp d21W/RQhIb/N523voEmL45PZIEiSLOdv3NEIInfcDqdvf8D5bZexUS/7CdvlGdED 3Pbl55fMq5dd9JMOMbhs4MeZ8SXk4O/cdeb0YhIvwV8dJ3sdBxM4DGcjnTbhY2RN RVaGi5U8rlrGCZp3D9RkA2iQk+RT8Iq9A7r+ct6OmlC0T8w1dVb8SkS69P4tZQtb t8qesR/EO6rApn2KISban9SLUHZikyCNDRUapc719E14qGwEf33ngCHuBWEjWTvZ UOXiHgiKOIgZPEM/VFFbHMuoG/uM6avivkeLoATkO/tfr5GDb8h5tdH4+d2dnHLU 4OPxPfWiyYId6XWfrqpmPVDviQ0V+lrQRFk9zLuCnhrNWG2nPVIPynk584KQip7L 9dIk4yDKONephzRTFUoW9jV0EqtUEoeDLuhiDLh7oUFwEKUVyxKIig51emu3YjyS lpXmKg2LEfA= =G2ZQ -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of device tree changes for omaps for v4.16 merge window This branch mostly configures more hardware support: - Clean-up dts files to remove leading 0x and 0s from binding notation to remove more dtc compiler warnings - A series of am437x updates for backlight, to fix inverted pad pull macro, and to configure power management related OPPs - Configure n950 and droid 4 command mode LCD panels - Updates to pandora and gta04 LCD panels - Add support for am574x-idk - A series of changes to configure more dra7 related PCIe features - A series of fixes for am335x-boneblue for WLAN, UARTs and CAN configuration - A series of changes to configure dra7 OPPs and VDD supplies * tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits) Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode" ARM: dts: am572x-idk: Add cpu0 vdd supply ARM: dts: am571x-idk: Add cpu0 vdd supply ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supply ARM: dts: dra7-evm: Add cpu0 vdd supply ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supply ARM: dts: dra7: Enable 1.5 GHz operation for the CPU ARM: dts: dra7: Add MPU OPP supply node ARM: dts: dra7: Add vbb-supply to cpu and additional voltages ARM: dts: am335x-boneblue: enable can ARM: dts: am335x-boneblue: enable usarts ARM: dts: am335x-boneblue: fix wl1835 IRQ pin ARM: dts: dra7: Remove deprecated PCI compatible string ARM: dts: dra76-evm: Enable x2 PCIe lanes ARM: dts: DRA72x: Use PCIe compatible specific to dra72 ARM: dts: DRA74x: Use PCIe compatible specific to dra74 ARM: dts: dra7: Add properties to enable PCIe x2 lane mode ARM: dts: am57xx: Add support for am574x-idk ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supply ARM: dts: am437x-idk-evm: Disable OPP50 for MPU ... Signed-off-by: Olof Johansson <olof@lixom.net>	2018-01-04 23:06:32 -08:00
Olof Johansson	8102324d86	TI sysc driver updates for v4.16 merge window ... We now have gotten ti-sysc driver to the point where it can parse interconnect target configuration from device tree instead of the legacy platform data. This series updates the device tree binding and adds parsing to the driver for quirks and capabilities. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlo9SDIRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMnOA/9HboJqef8A3cHFKdbM/PVrRNUl7E9ozm2 mEFios7yde4WYx1GVTal66oX8h0YJY/l3jUtBe/IiWosUCZP/vDbo+w0rWrJaVhC xitZ5mIQniduM/7LnQOpznVXVFgVezefbJFKRVI4Fs+dUlJjDnyawob5Jr9egMxj 613l28FJX817y3jZ9CYf2/qBdRt8HwpkAI3V0PRXn0r6wik+0XohipHUvotDZFpb V8woyAX1H7gzSkNKw53ViL38bJCQ4/DlhRbaSojzBF8Lm4xMx37TWty/wbR3aYjS 0FoQtQR9URBQSRyCbBLL0m9/fY92tMQlltT5/Pd/Yc6CBDhhGQr+e7DE23lHKpWH qTc3YnHOAqHEC8oTLfL6Yknkm4MXf11OX9HKPJP9KOGKYq7YdGrG/AJnvyOXMIUE o68k91ST3mn9HbG4gPvVoHhHqe2GV15LI2ey5HJ8jk46BJGaaDW0WuFw7m5G/CMB q++9Lbu/MQSJtI3eJexLxJBlOQr7lUmC/ACa3Fl+W7C1F5LUPsio/aJrvX3YqNZ3 th8arjGkkfZx9WEsXfW7kHi1ljYzvrP8wnwX14sydbpoPgoWlRpA9d4EbOPPy9Wb c9/XUzOrPk3xgo5KntqJmCIjoa/OXxHrW5nWBU7cxbQbjH6IOW9lb4gO8sTUtE3H HA8uV88RU4U= =Hwvv -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers TI sysc driver updates for v4.16 merge window We now have gotten ti-sysc driver to the point where it can parse interconnect target configuration from device tree instead of the legacy platform data. This series updates the device tree binding and adds parsing to the driver for quirks and capabilities. * tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Add parsing of module capabilities bus: ti-sysc: Handle module quirks based dts configuration bus: ti-sysc: Detect i2c interconnect target module based on register layout bus: ti-sysc: Add register bits for interconnect target modules bus: ti-sysc: Make omap_hwmod_sysc_fields into sysc_regbits platform data ARM: OMAP2+: Move all omap_hwmod_sysc_fields to omap_hwmod_common_data.c ARM: dts: Add generic ti,sysc compatible in addition to the custom ones dt-bindings: ti-sysc: Update binding for timers and capabilities Signed-off-by: Olof Johansson <olof@lixom.net>	2018-01-04 23:06:04 -08:00
Olof Johansson	09fa4ba5e2	Actions Semi arm64 based SoC DT for v4.16 ... This adds S700 SoC and CubieBoard7. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJaPNk9AAoJEPou0S0+fgE/DccP/2itYmey7EPKZwq4ybuvQ5Hp 4cy5ubYGXcy4FGzfoT4ueJl+0oZxXJoXCoSWoUgnYYOmOseBVECFQyhaS13NIpbD ODaVU2tuHCcoWLQ/239NFoyiJgk3BAL792RItFwx56FGHEIdHWb8cnQqqO0QGga3 XmJXrj7S3Ta3zxcB/O5Rantqbq+NB4FDollzNg6buMhfaIeZDyvqUxQKLICt+QB1 Hm9AxFfzyg9AVslToKSuReUgvsM6oKvkON0XXduuej0SJXbBMgS0Yv6Z4RWjIQ4w drYM9bvA+dcuIKoGwzU63bAvT4Dw5YlZ2hxvOZfV/mMJRebmIQbPx1+tk0Yn41zs 7gj3xVontUaZPY8Py7vbuQ1jq4N5dVWZvMKbW/Kt0OXsPDAVz5odQnEhVBF9WPQk 7Clv0gqKJtAR1QplcMsaxcZYDukK3PZ4WlTacd1rhI7XQOwv+hVuBm0TwzNWBCzI 4PyRalloq0l2DT0wvC/mAKj3G7ZWKVcyxIDouzLlr1vuNUbx7w4FhACyOgDzZ+0f J/nU0JDKE78WhYtUV0OromDh0eRKYt7uNVDWC+qLNoWlChaEmgYnvJg8NFguJ289 J85XAVW15ipD60IwhxVTczca079kmo08ZRy/Ky52vL9bU69Uyz4cpNxeG+hfZYX7 +5cSaCxq+2lG/Ct4wFDp =T9Sv -----END PGP SIGNATURE----- Merge tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Actions Semi arm64 based SoC DT for v4.16 This adds S700 SoC and CubieBoard7. * tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: arm64: dts: actions: Add S700 and CubieBoard7 dt-bindings: power: Add Actions Semi S700 SPS dt-bindings: arm: actions: Add S700 and CubieBoard7 Signed-off-by: Olof Johansson <olof@lixom.net>	2018-01-04 22:36:42 -08:00
Abhishek Sahu	e1f34e4f27	dt-bindings: clock: qcom: add misc resets for PCIE and NSS ... PCIE and NSS has MISC reset register in which single register has multiple reset bit. The patch adds the DT bindings for these MISC resets. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>	2017-12-21 16:03:38 -08:00
Abhishek Sahu	8c1c2c5a96	dt-bindings: clock: qcom: add remaining clocks for IPQ8074 ... This patch adds the DT bindings for following IPQ8074 clocks - General PLL’s, NSS UBI PLL and NSS Crypto PLL. - 2 instances of PCIE, USB, SDCC. - 2 NSS UBI core and common NSS clocks. NSS is network switching system which accelerates the ethernet traffic. IPQ8074 NSS has two UBI cores. Some clocks are separate for each UBI core and remaining NSS clocks are common. - NSS ethernet port clocks. IPQ8074 has 6 ethernet ports and each port uses different TX and RX clocks. - Crypto engine clocks. - General purpose clocks which comes over GPIO. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>	2017-12-21 16:03:28 -08:00
Chunyan Zhang	bf4439452b	clk: sprd: Add dt-bindings include file for SC9860 ... This file defines all SC9860 clock indexes, it should be included in the device tree in which there's device using the clocks. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>	2017-12-21 15:00:54 -08:00
Arnd Bergmann	2939f96539	- mt8173 add cpufreq related nodes ... supply nodes frequency/voltage operation table - mt2712 add cpufreq related nodes fixed regulator supply nodes frequency/voltage operation table - mt2712 add clock contoller nodes - mt2712 add scpsys node -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlo7nR8XHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00Nv2A/+Lw6UXhnIrINEv+LP9d5ECLIO QECRmHMYhyJDNAS3EjZR3phneYFKSKxdoAwF9prT0vaTZSvaGVShSg7RiN/sSNyR u7mOWrjDroXMLVw1stxLe25yLpO9nuw3ORf5kS1FE8CHeeC+6cJ6NPob/qEz9iUq BqcZJIrHzwWQASc3JpNwTcYnHRqweylyyKjrHF4mIzXoW7RpW/1yONjXc7hXapuB EggZRpHdM/1wv9HxBlsuPfH/NxHmA48DIS/kz+00tSKwpVJgKdSbTW7lFN99up8s 6HUx1qpd1Elh8q048c0Oe202ubYOwpDDO8REeFsqBFuseAXPogPzXPSusTghm8Ph orgmV3sOHvr2XWD7QeEUtVSfPV+JnGWFeJ/Bx9jAxIVQ3BmWkoHbuiq/kAZ/uK3s HvnaiaidiBnIygNE6OZIvKNbeoF40601+60VquKfydqoQ47mYR0+xN89Q5F4m6Q9 ugTLbHrDU00soPueODWi+AlLfarThIjU+7aqcPbya6sNJfA/HAtVmX/wpWc5kR9a rEuEzFUgAWQocfZNZXgAfQES67L32MFsTbK5B0gpTT2VgAFdmKNUnjq4AFX+kghk GHTHxz4s6iMoH6kdaU3BVkJIiUBSKXoCsnIRwD7QOxlSNNMdtwyugUxeXBzSQA4j 7EgwCT9WfCIXEfSP3Eo= =yHbI -----END PGP SIGNATURE----- Merge tag 'v4.15-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "arm64: Updates of aarch64 DTS for v4.15-next" from Matthias Brugger - mt8173 add cpufreq related nodes supply nodes frequency/voltage operation table - mt2712 add cpufreq related nodes fixed regulator supply nodes frequency/voltage operation table - mt2712 add clock contoller nodes - mt2712 add scpsys node * tag 'v4.15-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: Add power controller device node of MT2712 arm64: dts: mediatek: add mt2712 cpufreq related device nodes arm64: dts: mt2712: Add clock controller device nodes arm64: dts: mediatek: add mt8173 cpufreq related device nodes dt-bindings: soc: add MT2712 power dt-bindings	2017-12-21 18:09:54 +01:00
Arnd Bergmann	30e18df6d3	dt-bindings: Updates for v4.16-rc1 ... This contains a set of patches that extend existing bindings with support for Tegra186. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlo6tPUTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeP2EAC7yTdgs3kF6VOi8d1/+Z/RF38OlYFW 3vrzbFj2g2p831Dc3w2Zy6lSbVGX0vitppxYCAw7rgR2Dn/85jihZQZshMDRpdfE V0bdi+c7UJt7XkkW/tCQ7WF8gP6zlvzRyacJJnALDh8VNYfxdNHB4X9wY5PhUToY oFAGIlogJwaDVz6i0E3kmLr1FhscTTCvHRatOBpKa8ecA9hC6liMO14aHpTT+mc0 +idN+bT+e4cM1BaZz9GTxcYgD33bU0gTD2egD2Ru7t7HYRqAnY28h81AreUj4WIX ijLiM7CWQa8L2cyHXQEshNQUA7tPAUBAJ6PEyDtfezdhCZsYxCjvONCJmt9wzv1M 3kEtMs/yrpn3cVIeyjp02QqGtPZmBCrGxilqyI+wN5xHEkJcn5Zzh77FtCoDAPDo YOsWpiSrGvjaK3Pgcl2/k79UUBG9ZhpmaJL6gNJ9sj2K4SqOaFc/Oe+zNystLpsF UBiJt0pvFLMwu12eeRbbd5ZSq2cfx16gdJOAE9RtcaMD1qxhRPm4xtAcHeR3fY8G mjwqF194LHOZkxuL+EynbCUzWY5oBcYaD/V4AgDbxm0U1CPzfwyxN9pfv3Ze8eh1 vHGdl+72u7ycp8xDpEduIftRneJbFtvD0Kgk0npECaM1gTZcFyr/ssz7boLTmXye e0EH382qED5E9w== =ItSb -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "dt-bindings: Updates for v4.16-rc1" from Thierry Reding: This contains a set of patches that extend existing bindings with support for Tegra186. * tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add Tegra186 support dt-bindings: misc: Add Tegra186 MISC registers bindings	2017-12-21 17:52:50 +01:00
weiyi.lu@mediatek.com	b88a17cb93	dt-bindings: soc: add MT2712 power dt-bindings ... Add power dt-bindings for MT2712. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>	2017-12-21 11:26:06 +01:00
Joel Stanley	a7d1ecb60a	dt-bindings: gpio: Add ASPEED constants ... These are used to by the device tree to map pin numbers to constants required by the GPIO bindings. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>	2017-12-21 14:03:14 +10:30