Fix block pack mode parameter in wsa frame params to
to get proper frame allocation avoiding port collision
between DAC port and SMART BOOST port.
Change-Id: I3e552f189a67661d63a6cd0affc1cb233b53bda7
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
When SSR occurs master needs to restart even though clock
stop mode is supported. Add proper handling of master
during SSR and suspend.
Change-Id: I21c0ffd4fb741788dd12671fe4bd04cca9d7ff59
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
It is sometimes observed that afe could send multiple wakeup
events at a time. Avoid this by handling wakeup event only once
per swr suspend.
Change-Id: Ieb9ed1b18c8c93cb7db4b75e3411cc25838be492
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Pop is observed on HPH playback start. Enable SWR port
config setup before HPH PA enable.
Change-Id: I2253be1c7e4d8df2bffd7bd0396ceb72a5018637
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Slave could trigger multiple path control api multiple times
after connect/disconnect port. Avoid handling the api without
new connect/disconnect requests to reduce latency.
Change-Id: I4db52fdebfd6b7c0fe3f388f25dfaa4981d5f61c
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add widget and routing support for vdd-buck supply
as dynamic for all rx usecases.
Change-Id: I1e67e7e950e33a0d98900ee0b20e0dc818a7936d
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Avoid reinitializing master when resuming from clock stop
to avoid possible slave sync lost.
Change-Id: I8b2403bf10c0ec2ab7b294d64441b4d9a8afcaa0
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add support for sending APTx Adaptive encoder mode,
High Quality or Low latency to LPASS.
CRs-Fixed: 2272343
Change-Id: Ibbe809d5ca4481d3e98931e40213dd16110f6a57
Signed-off-by: Sharad Sangle <assangle@codeaurora.org>
If interrupt indicates a fault in multichannel case,
reset all cluster devices in a specific order.
Change-Id: I077ff65c5f2b5e656fcdf6533fde04eba426e322
Signed-off-by: Romed Schur <rschur@codeaurora.org>
If headset is connected during SSR, after recovery mbhc
driver expects a new detection event as the driver is reinitialized.
Reset detection type to insertion to retrigger a hw interrupt
for mbhc driver.
Change-Id: I55705eb6b6a289deb5dc16a4b9ef6252082a3d9a
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
The format change event signaling for SPDIF input interfaces
is adapted to provide format information through sysfs nodes.
Change-Id: Ifab1074a0e4b13e08813e27f8694023c2c47bfe1
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Remove the detailed format information from each format change event as
sysfs interface is used now.
Change-Id: I6abd221e87b18c1f0e84e62db8076b8198e8ad24
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Compressed streams now do support up to 32 channels.
Use new ADSP API for 32 channels if ADSP supports this.
If not fall back to 8 channel API.
Change-Id: Ief6fe189a6a34f15cfb96bfb9cb7d97b03633b95
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
AFE MI2S interfaces now support up to 8 data lines
(16 channels). Add support for the same.
Make senary PCM and MI2S ports available.
Change-Id: I810dbe1c12ff091b3b4604d9e59f7015e3a55c98
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
AFE MI2S interfaces now support up to 8 data lines
(16 channels). Add DAI support for the same.
Change-Id: I7c507c0161733094c1260731c7a046561fb63200
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
PCM streams do now support up to 32 channels.
Extend Playback Channel Map mixer control to 32
channels. Use new DSP 32 channel API if DSP version
supports it. If not fall back to 8 channels API.
Change-Id: I74c4f91b0c9fab2a963690ba8143ebea36ad23dd
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
ASM supports now up to 32 channels. Extend
the ASM Channel map structures from 8 to 32
channels.
Change-Id: I958d15910785cf0c5707dec432b4dd3e272c3dc1
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
ADM supports now up to 32 channels. Extend the
ADM Channel map structures from 8 to 32
channels.
Change-Id: I87b3e4cce850af92467b139da9df67fcdafaf0b0
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
AFE supports now MI2S interfaces with up to 16 channels.
Add new APR API functions to support this.
Add support for senary PCM/MI2S ports.
Change-Id: I18d48eed4e9a0476363220e959a0f254aa292056
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
The format change event signaling for EP92 HDMI input is adapted
to provide format information through sysfs nodes.
Chip configuration is done through sysfs as well.
Change-Id: I8c930ca5647899b4434272009699763c32fe9d04
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add metadata to configure latency mode for DSP transcode
loopback to set legacy or low latency path. Userspace API
introduced to configure the same.
Change-Id: I914c68a9e9d8647530b72c42548e571b7508c423
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add app type configuration support for DSP transcode
loopback to enable the required PP topologies.
Change-Id: I60ee50d78ba3c0edc9df042a2a86e691d62f24b7
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Mixer control queue handling is required only for
playback. Move mixer control queue handling to be
part of the playback stream in DSP transcode loopback
driver.
Change-Id: Ia8067237f80d509f969cf454f5afa08aaa6b0e52
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Update passthrough mode to pick proper path type for
compressed input data port in transcode loopback driver
to support compressed input in DSP loopback.
Change-Id: Ib2f66b467456787e08265a0da2bd85bb881a5d61
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add new dailnks in machine driver to support
compress loopback usecase for HDMI and BT sink.
Change-Id: Ie9658b3c06fd8d9a68b9b2317fe2689fa34a96f5
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add new FE dais and their routings to support
compress loopback usecase for HDMI and BT sink.
Change-Id: I95d683ff22cda0e7d52333e7dabbb7694cb254f3
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Modify snd_event stub functions prototype as static inline
to make sure that there are no multiple definition errors
in the case of static compilation.
Change-Id: I0848be946b332df22c045b8e5fed4c39b7ee0fda
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
wcd interrupts can be disabled in the same interrupt
context. So use non-sync disable irq api for disabling the
interrupts to avoid a deadlock.
Change-Id: I82dda8dbcd80ba18674eea00686f6a4f54a3b340
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
During SSR, when the playback on speaker gets started before codec
is out of digital core power collapse, results in soundwire
register read/write failures. Check for codec power state before
enabling the soundwire during speaker device path enablement for
playback usecase to avoid soundwire register read/write failures.
Change-Id: I3b45ef0c34ad4f97aad89afaf719989ffbda7485
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add proper way to clear interrupts using regmap irq framework,
to avoid mismatch between interrupts handled and interrupts
cleared. wcd937x requires writing '1' and then '0' to clear
interrupt. Set a new regmap irq flag 'clear_ack' to indicate this.
Change-Id: I1346dc66735d3b5788e1cc0cfef772c9deacbfc1
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Soundwire slave interrupt is only edge type, so any pending slave
side interrupts could not cause a new slave interrupt, if
they are triggered before clearing of existing interrupts.
Recursively trigger slave irq until there are no pending slave
interrupts to handle this issue.
Change-Id: I254f2467f09172490796114b48f1f0feb604ad17
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
