WCN7850 device ID is missing from cnss_get_bus_type() API.
Hence add it.
Change-Id: I9eaf82dadcf715fb8a5d223a432b0135ccd0a6a7
Signed-off-by: Yue Ma <yuem@codeaurora.org>
This patch adds support to trace per process utilization of the GPU
mapped memory. Additionally track the overall gpu memory usage which
includes process allocations, imported dma bufs and kgsl globals.
Change-Id: Icfee373efc7e84efe90cf20486ae6583eaa4f697
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Mohammed Mirza Mandayappurath Manzoor <mmandaya@codeaurora.org>
Signed-off-by: Neeraja P <neerp@codeaurora.org>
This is initial driver change to support npu virtualization.
Change-Id: I8e5070cc3d3b9cd3a1d15d00deeef9700f6428ec
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
Some power regulators are voted by SPSS UEFI driver,
that needs to be unvote by HLOS.
Change-Id: I6d9f24c3937188b316d5912751c48207f3b8ab85
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
This driver allows clients to send messages to Alway On processor
using QMP transport. Users can echo a frequency into an exposed sysfs
node to send to AOP. The driver expects the Cap frequency of DDR based
on SKU.
Change-Id: I083c1ec2da6990c5815550f897069ff27c6b7617
Signed-off-by: Vinay Sudra <vsudra@codeaurora.org>
Consider a case where DWC3_DEPCMD_ENDTRANSFER command times out,
then controller will not receive DWC3_DEPEVT_EPCMDCMPLT event and
request queued will not be given back to the function driver from
remove_requests. Now, if a function driver(e.g mass storage)
tries to dequeue the request, gadget driver will move the request
from started_list to cancelled_list but will not giveback the
request to function driver causing it to wait forever for the
transfer to be completed. This can lead the tasks to be in hung
state causing a crash.
Fix this by giving back the request from ep_dequeue by cleaning up
the cancelled requests.
Change-Id: I08b7a766d34992808260788a907054c835402c45
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
Enable Configs for API level 30. These are needed for android support.
Change-Id: I62c0ab4266211716e54a76197e872e8288a10d6a
Signed-off-by: Singa Reddy Dasari <singredd@codeaurora.org>
Enable Configs for API level 30. These are needed for android support.
Change-Id: Ib59eb8ea8a85c7f2a4af4318353dbe16b033616f
Signed-off-by: Singa Reddy Dasari <singredd@codeaurora.org>
Return error code on failure to get tsync time though sys entry.
Change-Id: I46302b5af314325f752aaf586b4ca6cd4608d82a
Signed-off-by: Vivek Pernamitta <vpernami@codeaurora.org>
This change initializes length to zero value. This is
needed when rpmh_unit_base is not present.
Change-Id: I91af06a49a69433f119c2b73376606df34820838
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
sync_file_create increases refcount of fence, so need release dma fence
handler after it.
Change-Id: I3cc60d6a7e8a32138bfee611864cee00c2ac7dd3
Signed-off-by: Kasin Li <donglil@codeaurora.org>
kgsl_allocate_global can fail for global buffer profile_desc. Hence make
sure that an invalid access to the pointer is not made in
set_user_profiling. Similarly allocations for global buffers setstate and
alwayson can also fail. Make sure we don't access an invalid pointer in
adreno_snapshot_global and kgsl_gpuaddr_in_memdesc.
Change-Id: Ia2f314575c5f4357ac8f7a2a72e869e3c648837d
Signed-off-by: Puranam V G Tejaswi <pvgtejas@codeaurora.org>
This patch contains changes for disabling
ASD regulator if HST is attached.
Change-Id: Ic1f6515861600f8bebc1d065ce51d7df5a3f28db
Signed-off-by: priyankar <prigup@codeaurora.org>
CNSS_BDF_DUMMY type board data file is no longer used. Hence remove
it. A BDF file with regular name and dummy content should be sent as
dummy BDF instead of just sending a dummy string.
Change-Id: I7483a6801584f56ac4e87e2074280291c9734472
Signed-off-by: Yue Ma <yuem@codeaurora.org>
In fs_ready_store(), only dereference plat_priv pointer after NULL
check.
Change-Id: I222139d02a8cc8aef19e2ff879a953977896a08c
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Currently the driver requires pwr_evt_irq to be compulsorily
passed from DT unless the core is dual port. Now consider a core
that does not allow SSPHY autosuspend during operational mode,
instead allowing it only as a part of dwc3_msm_ssphy_autosuspend.
As soon as autosuspend is enabled, there is a chance that
pwr_evt_irq is fired with IN_P3 bit set. Although the driver will
be marking mdwc->in_p3 in the pwr_evt_handler, it will fail to
see IN_P3 bit to be set(because it has been cleared in handler)
during the 5ms wait time in the ssphy_autosuspend function and
prepare_suspend will again set mdwc->in_p3 to 0. This leads to
failure of runtime/system suspend.
Fix this by not passing pwr_evt_irq from DT for the cores which
disable SSPHY autosuspend.
Change-Id: I85ca7e45337fe35c570d163766e7638e11537201
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
F_FS function driver allocated ffs_eps and updates ffs_ep->ep
to corresponding usb_ep during func->bind and never clears it.
On bind it also saves ffs_ep context in epfile->ep.
During func->disable, it clears only ffs_ep context in epfile->ep
and on func->unbind it frees ffs_eps memory.
ffs_epfile_io routine currently relies on ffs_ep->ep (which is
never cleared and ffs_ep could be freed on unbind) to detect any
disconnect during active IO. This can result in various issues e.g.
use after free use of ffs_ep if unbind finished before epfile_io
could resume or "stop adbd" trying to dequeue a freed USB request
when epfile_io could execute only after F_FS got disabled as
'if (ep->ep)' check would be TRUE.
Fix this by checking stored ffs_ep context against latest epfile->ep
to figure out if endpoint got disabled or changed before acquiring
spin_lock.
Change-Id: I6bdcdf0dff0813ed7b2af8c24f544a22796b0369
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Porting the FDE functionality from msm-4.14 branch commit
<b8f1b6a6> (Add support for block disk encryption).
Modified to be compatible with the 5.4 Kernel.
Test:
1. Basic_SimpleEncryption.
2. ModifyEnforcedFiles_FileCreationWithinEnforcedFolder.
3. PIN, pattern, password.
4. Verified filename encryption.
5. Generate/set ICE keys.
6. Enable ICE state for userdata partition.
7. Format the userdata partition.
8. Check if partition is encrypted via ICE.
Change-Id: I307d75b7cdf25f7a9ad2b4f948e64d13278e6f03
Signed-off-by: Neeraj Soni <neersoni@codeaurora.org>
Signed-off-by: Victor Zaharchuk <vzaharch@codeaurora.org>
Different GPU can have a different GMEM size so need to configure
UCHE GMEM base address accordingly. Having a fix base as 0x100000
results in RB and UCHE GMEM range overlap on GPUs with GMEM size >1MB.
Also, adjust SVM 32bit base based on GMEM UCHE range end to prevent
GMEM UCHE and SVM 32bit range overlap.
Change-Id: I41330a33b79bf8c79b593ecd89593a796230b074
Signed-off-by: Deepak Kumar <dkumar@codeaurora.org>
The version numbers shall be copied into the local variables for
any potential version comparison.
Change-Id: I08ac6359df0890a2605dbb6279b73abe09060ec8
Signed-off-by: Yong Ding <yongding@codeaurora.org>
The prink() could consume enough CPU when the retry eventually takes
a lot of times before it could succeed.
Change-Id: I4f49d0650ee3ae06700d2ce592acd0532bbf38cd
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Enable per process page table for conformance svm test to pass.
Change-Id: I2dcd7974b08e481d74c94e4517f6a1373beaae77
Signed-off-by: Rahul Sharma <rahsha@codeaurora.org>
