The driver was not so bad at big endian at all, only the optimised fifo
read/write functions need a fix, with this fix the driver works on
a pegasus PPC machine.
Signed-off-by: Karsten Keil <[email protected]>
The channelmap should have the same size on 32 and 64 bit systems
and should not depend on endianess.
Thanks to David Woodhouse for spotting this.
Signed-off-by: Karsten Keil <[email protected]>
rt2x00usb_vendor_request_large_buff is write-only, so it is
safe to make the argument a const.
Fixes compile warning:
drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware':
drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ
Signed-off-by: Ivo van Doorn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
As reported by Adrian Bunk, commit d5686b444f
(switch mtd and dm-table to lookup_bdev()) causes the following compile
error with CONFIG_BLOCK=n:
CC drivers/mtd/mtdsuper.o
drivers/mtd/mtdsuper.c: In function `get_sb_mtd':
drivers/mtd/mtdsuper.c:184: error: implicit declaration of function 'lookup_bdev'
drivers/mtd/mtdsuper.c:184: warning: assignment makes pointer from integer without a cast
drivers/mtd/mtdsuper.c:197: error: implicit declaration of function 'bdput'
make[3]: *** [drivers/mtd/mtdsuper.o] Error 1
Fix it by putting the block device lookup inside #ifdef CONFIG_BLOCK
Signed-off-by: David Woodhouse <[email protected]>
People don't like them and think they're errors.
Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <[email protected]>
Commit f15cbe6f1a
(sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS
(which is used by LIBGCC) below LIBGCC, causing build
errors like the following:
<-- snip -->
...
LD .tmp_vmlinux1
arch/sh/kernel/built-in.o: In function `module_clk_recalc':
clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i'
...
make[1]: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Reported-by: Adrian Bunk <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
This ended up causing build breakage on O= builds, as reported by Adrian:
<-- snip -->
...
CC init/main.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27:
error: asm/machtypes.h: No such file or directory
make[2]: *** [init/main.o] Error 1
<-- snip -->
So we simply move machtypes.h back to its original place. asm-offsets.h is
still generated there regardless, until such a time that we find a better place
to stash auto-generated files.
Reported-by: Adrian Bunk <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
This fixes a bug in operator precedence in the newly introduced vc_translate
macro. Without this fix, the translation of some characters on the
kernel console is garbled.
This patch was copied to the e-mail list previously for testing. Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: Tim Bird <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
Delete 2 EXPORTs that were accidentally sent upstream.
Signed-off-by: Jack Steiner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.
This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Wire up for FRV the system calls that were added in the last merge window.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Wire up system calls added in the last merge window for the MN10300 arch.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Currently function tty_ldisc_get() tries to load an ldisc driver module
only when tty_ldisc_try_get() returns -EAGAIN. This happens only if
module is being unloaded. If ldisc module is not loaded
tty_ldisc_try_get() returns -EINVAL and this case is not handled in
tty_ldisc_get(), so request_module() is not called.
Attached patch fixes this by calling request_module() if
tty_ldisc_try_get() returned any error code.
I discovered this when my UMTS modem stopped working with 2.6.27-rc1
because module ppp_async was not loaded.
Signed-off-by: Eugeniy Meshcheryakov <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: s390: Fix kvm on IBM System z10
KVM: Advertise synchronized mmu support to userspace
KVM: Synchronize guest physical memory map to host virtual memory map
KVM: Allow browsing memslots with mmu_lock
KVM: Allow reading aliases with mmu_lock
Some platform decide whether they support huge pages at boot time. On
these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is
set to 0 when there is no such support.
The patches to introduce multiple huge pages support broke that causing
the kernel to crash at boot time on machines such as POWER3 which lack
support for multiple page sizes.
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
ARCH=h8300:
init/main.c:781: undefined reference to `___early_initcall_end'
Same problem have
__start___bug_table
__stop___bug_table
__tracedata_start
__tracedata_end
__per_cpu_start
__per_cpu_end
When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro.
VMLINUX_SYMBOL adds a prefix charactor.
You can't just use straight symbol names in common header files as they
dont take into consideration weird arch-specific ABI conventions. in the
case of Blackfin/h8300, the ABI dictates that any C-visible symbols have
an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to
be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic
in their own files.
[[email protected]: coding-style fixes]
Signed-off-by: Yoshinori Sato <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: "Mike Frysinger" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Each resource should be printed on its own line, so start snprintf'ing
at the beginning of the buffer every time through the loop.
Also, use scnprintf() rather than snprintf() when building up the
buffer to print. scnprintf() returns the number of characters actually
written into the buffer (not including the trailing NULL).
snprintf() returns the number of characters that *would be* written,
assuming everything would fit in the buffer. That's nice if we want to
resize the buffer to make sure everything fits, but in this case, I
just want to keep from overflowing the buffer, and it's OK if the
output is truncated.
Using snprintf() meant that my "len" could grow to be more than the
the buffer size, which makes "sizeof(buf) - len" negative, which causes
this alarming WARN_ON:
http://marc.info/?l=linux-kernel&m=121736480005656&w=2
More useful snprintf/scnprintf discussion:
http://lwn.net/Articles/69419/
Signed-off-by: Bjorn Helgaas <[email protected]>
Reported-by: Pete Clements <[email protected]>
Cc: Rene Herman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Some module parameters with only one line have the '\n' at the end of the
description. This is not needed nor wanted as after the description the
type (i.e. int) is followed by a newline.
Some modules contain a multi-line description, these are not affected
by this patch.
Signed-off-by: Niels de Vos <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Cc: John W. Linville <[email protected]>
Cc: Ed L. Cashin <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Roland Dreier <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]>
Cc: Jeff Garzik <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_it821x: Driver updates and reworking
libata.h: replace __FUNCTION__ with __func__
ata_piix: subsys 106b:00a3 is apple ich8m too
libata-core: make sure that ata_force_tbl is freed in case of an error
libata: update atapi disable handling
pata_via: add VX800 flag; add function for fixing h/w bugs
pata_ali: misplaced pci_dev_put()
asm/se.h moved to mach-se/mach/se.h, update the path. We could use
mach/se.h here also, but it's preferable to be explicit when there's
only a single supported mach-type.
Signed-off-by: Paul Mundt <[email protected]>
Presently this was always being set to AUDIT_ARCH_SH, which assumes
big endian. Fix this up so that the architecture actually reflects
what we're running on.
Signed-off-by: Paul Mundt <[email protected]>
This follows the changes in commits:
7d6d637dac4f72c4279e
on powerpc. Adding in TIF_NOTIFY_RESUME, and cleaning up the syscall
tracing to be more generic. This is an incremental step to turning
on tracehook, as well as unifying more of the ptrace and signal code
across the 32/64 split.
Signed-off-by: Paul Mundt <[email protected]>
This converts the single stepping done by sh/sh64 ptrace implementations
to use the generic user_enable/disable_single_step(), and subsequently
rips out a lot of ptrace request cases that are now handled generically.
Signed-off-by: Paul Mundt <[email protected]>
A quick cut and paste from other architectures to allow SH
to parse the elfcorehdr command line argument which is required
for both is_kdump_kernel() and vmcore to function.
(the former is as yet unused on SH).
Tested compilation only
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
[XFS] Remove vn_revalidate calls in xfs.
[XFS] Now that xfs_setattr is only used for attributes set from ->setattr
[XFS] xfs_setattr currently doesn't just handle the attributes set through
[XFS] fix use after free with external logs or real-time devices
[XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
[XFS] fix compilation without CONFIG_PROC_FS
[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
[XFS] fix mount option parsing in remount
[XFS] Disable queue flag test in barrier check.
[XFS] streamline init/exit path
[XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
[XFS] Don't assert if trying to mount with blocksize > pagesize
[XFS] Don't update mtime on rename source
[XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
[XFS] Restore the lowspace extent allocator algorithm
[XFS] use minleft when allocating in xfs_bmbt_split()
[XFS] attrmulti cleanup
[XFS] Check for invalid flags in xfs_attrlist_by_handle.
[XFS] Fix CI lookup in leaf-form directories
[XFS] Use the generic xattr methods.
...
iwl3945_rx_reply_rx was sending packets too early to
mac80211, before updating signal strength/quality.
This resulted in garbage power levels.
Signed-off-by: Maxim Levitsky <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Use the standard offsetof() macro to fix a compile warning below:
CC [M] drivers/net/wireless/prism54/isl_ioctl.o
drivers/net/wireless/prism54/isl_ioctl.c: In function 'prism2_ioctl_set_generic_element':
drivers/net/wireless/prism54/isl_ioctl.c:2658: warning: cast from pointer to integer of different size
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
ipw_write8() can't be used alone with a loop because of a wrong definition.
CC [M] drivers/net/wireless/ipw2200.o
drivers/net/wireless/ipw2200.c: In function 'ipw_ethtool_set_eeprom':
drivers/net/wireless/ipw2200.c:10579: warning: array subscript is above array bounds
drivers/net/wireless/ipw2200.c: In function 'ipw_load':
drivers/net/wireless/ipw2200.c:2663: warning: array subscript is above array bounds
Add missing do {} while (0) to fix them.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Some users of the RTL8187B have experienced difficulties since commit
49292d5635 that introduced the power
management wext hooks. This difficulty has not made much sense until
it was realized that it was possible for mac80211 to make a call to the
config routine while that routine was already being executed. On this
device, it is necessary to loopback the TX when changing channels. Unless
this is properly restored, the device will lockup. A mutex now protects
the device state, and the private data in several places.
The problem was found by Herton Ronaldo Krzesinski <[email protected]>,
who also suggested this type of fix.
Signed-off-by: Larry Finger <[email protected]>
Acked-by: Herton Ronaldo Krzesinski <[email protected]>
Acked-by: Hin-Tak Leung <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
In kernel version 2.6.26-rc9 my wireless LAN card worked; but in the
released 2.6.26, my RaLink rt2500 card wouldn't associate.
Git-bisect led me to this patch:
61486e0f68
rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()
I believe that there is a problem with that patch --- it
(inadvertantly) removes an extra line of code, that used to set the
DATABYTE_COUNT field.
This patch reinstates that line, and with it my card works again.
Signed-off-by: Peter Chubb <[email protected]>
Acked-by: Ivo van Doorn <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on
which the rtap functionality depends, only expose the rtap functionality
when mesh is also available.
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
The sequence counter can be accessed in IRQ context,
which means the lock protecting the counter should
be irqsave. To prevent making the entire intf->lock irqsave
without reason, create a new lock which only protects
the sequence counter.
Signed-off-by: Ivo van Doorn <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
When the EEPROM_BBPTUNE_VGC word is valid, we should
override EEPROM_BBPTUNE_VGCLOWER field with the BBP
value.
And we should _not_ do that when EEPROM_BBPTUNE_R17 is valid.
Signed-off-by: Ivo van Doorn <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
After the hardware has indicated the firmware upload has completed
and the device is ready, we should wait another millisecond to
make sure the device is really ready to continue.
Without this timout, bringing the interface down and up again will
fail due to incorrect register initialization.
Signed-off-by: Ivo van Doorn <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
The if-statement to determine the new TX/RX antenna
configuration was incomplete. It lacks the general
else-clause when the antenna wasn't changed.
This is a correct event, since it can occur when only
one of the antenna's has been changed or when the new
configuration is being forced (like when the interface
has just been added).
Signed-off-by: Ivo van Doorn <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Although most rt2x00 debugfs files don't contain
information which could compromise network security,
it is better to set the access permissions to root only.
This will be required when HW crypto is implemented,
because it could be possible to read the HW key from
the registers.
Signed-off-by: Ivo van Doorn <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch avoids stopping queue in the middle of the fragmented packet.
It is required that there will be ~10 (max packet/min fragment) or 16
(4 bits of frag number) free tfds all the time.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
This patch make mac80211 transmit correctly fragmented packet after
queue was stopped
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Mask out previously demanded interrupt flags because we set
new ones. Don't allow mixing them after switch from sta to
ibss and vice versa.
Signed-off-by: Jiri Slaby <[email protected]>
Cc: Nick Kossifidis <[email protected]>
Cc: Luis R. Rodriguez <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Provide default activate function to set the state of the led
when the led becomes bound to the trigger
Signed-off-by: Dmitry Baryshkov <[email protected]>
Acked-by: Ivo van Doorn <[email protected]>
Acked-by: Henrique de Moraes Holschuh <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
