PSR on CNL requires AUX IO wells to be kept on and the existing AUX domain
for AUX-A enables DC_OFF well too. This is not required, so add a new
AUX_IO_A domain for AUX-A to allow DC states to remain enabled. Other AUX
channels re-use the existing AUX domains.
v4: Reword comment (Rodrigo and Ville)
Rename _get and _put functions to include aux_io substring(Rodrigo)
Remove unnecessary diff that got included.
v3: Extract aux domain selection into a function (Ville)
v2: Add AUX IO domain only for AUX-A
Rebased on top of Ville's AUX series.
Cc: Imre Deak <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Suggested-by: Imre Deak <[email protected]>
Signed-off-by: Dhinakaran Pandiyan <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Since we're inhibiting context save of preempt context, we're no longer
tracking the position of HEAD/TAIL. With GuC, we're adding a new
breadcrumb for each preemption, which means that the HW will do more and
more breadcrumb writes. Eventually the ring is filled, and we're
submitting the preemption context with HEAD==TAIL==0, which won't result
in breadcrumb write, but will trigger hangcheck instead.
Instead of writing a new preempt breadcrumb for each preemption, let's
just fill the ring once at init time (which also saves a couple of
instructions in the tasklet).
v2: Assert that context save restore is inhibited, don't assert on ring
alignment. (Chris)
v3: Cleanup checkpatch.
Fixes: 517aaffe0c ("drm/i915/execlists: Inhibit context save/restore for the fake preempt context")
Signed-off-by: Michał Winiarski <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Daniele Ceraolo Spurio <[email protected]>
Cc: Michel Thierry <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Sometimes we need to boost the priority of an in-flight request, which
may lead to the situation where the second submission port then contains
a higher priority context than the first and so we need to inject a
preemption event. To do so we must always check inside
execlists_dequeue() whether there is a priority inversion between the
ports themselves as well as the head of the priority sorted queue, and we
cannot just skip dequeuing if the queue is empty.
As Michał noted, this doesn't simply extend to handling more than 2-port
submission, as we may need to reorder within the array of executing
requests which themselves are lower priority than the first. A task for
later!
Signed-off-by: Chris Wilson <[email protected]>
Cc: Michał Winiarski <[email protected]>
Cc: Michel Thierry <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Michał Winiarski <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Just store function pointers that give us the correct register offsets
instead of storing the register offsets themselves. Slightly less
efficient perhaps but saves a few bytes and better matches how we do
things elsewhere.
v2: Keep a local array of data registers (Chris)
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Since we no longer have a 1:1 correspondence between ports and AUX
channels, let's give AUX channels their own enum. Makes it easier
to tell the apples from the oranges, and we get rid of the
port E AUX power domain FIXME since we now derive the power domain
from the actual AUX CH.
v2: Rebase due to AUX F
v3: Split out the power domain fix (Rodrigo)
Reviewed-by: Rodrigo Vivi <[email protected]> #v2
Reviewed-by: Chris Wilson <[email protected]> #v2
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cross-subsystem Changes:
- Backlight helpers to enable/disable and find devices in dt (Meghana)
Core Changes:
- Documentation improvements (Chris/Daniel/Jani)
- simple_kms_helper: Add mode_valid() support (Linus)
- mm: Fix bug in interval_tree causing nodes to be out-of-order (Chris)
Driver Changes:
- tinydrm/panel: Use the new backlight helpers (Meghana)
- rockchip: Support gem_prime_import_sg_table + some fixes (Various)
- sun4i: Add A83T HDMI support using dw-hdmi (Jernej)
Cc: Meghana Madhyastha <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Jernej Skrabec <[email protected]>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqN15UACgkQlvcN/ahK
BwrQZwf/UMzK235ccIKn5OQRd2t4bi8aTTqa1Rfh0+t6Vw6gJvNG6aIuj4Nb5SUd
9PNJJOX3ENBuTEiQiuENF0oXBGU3bsZNb5TcasEg9ShhD6b59gS9k1HI+Qwzr4uB
xHL85yVPaOP2vNCywwDoWhPjNMySv0PDScEVVLK2CTqpllZuB0FzEOOUknRk7Phn
1jeVeAe0sfx27EJSOtandNewa3JvAtSRAjeFQ3EBfbc43opi1LxURnOig8Gz3csf
b7x46lYtweZ9NH0Ybg584nLppAdG6hUnb7VPsAJK+KiR5Bn57J6et1g7WEzaRhSI
hO6B5AcMspsFRMkWcyPiIEdqv9mVkQ==
=kZmv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
Cross-subsystem Changes:
- Backlight helpers to enable/disable and find devices in dt (Meghana)
Core Changes:
- Documentation improvements (Chris/Daniel/Jani)
- simple_kms_helper: Add mode_valid() support (Linus)
- mm: Fix bug in interval_tree causing nodes to be out-of-order (Chris)
Driver Changes:
- tinydrm/panel: Use the new backlight helpers (Meghana)
- rockchip: Support gem_prime_import_sg_table + some fixes (Various)
- sun4i: Add A83T HDMI support using dw-hdmi (Jernej)
Cc: Meghana Madhyastha <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Jernej Skrabec <[email protected]>
* tag 'drm-misc-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: (41 commits)
drm/omapdrm: Use of_find_backlight helper
drm/panel: Use of_find_backlight helper
drm/omapdrm: Use backlight_enable/disable helpers
drm/panel: Use backlight_enable/disable helpers
drm/tinydrm: Call devres version of of_find_backlight
drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight
drm/tinydrm: Convert tinydrm_enable/disable_backlight to backlight_enable/disable
drm: add documentation for tv connector state margins
drm/doc: Use new substruct support
drm/doc: Polish for drm_mode_parse_command_line_for_connector
drm/docs: Document "scaling mode" property better
drm/docs: Align layout of optional plane blending properties
drm/docs: Discourage adding more to kms-properties.csv
drm: simple_kms_helper: Add mode_valid() callback support
drm/todo: Add idr_init_base todo
drm: Use idr_init_base(1) when using id==0 for invalid
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
dma-buf/sw_sync: Fix kerneldoc warnings
drm: Fix kerneldoc warnings for drm_lease
...
Currently the FBC code doesn't handle the 90/270 degree rotated case
correctly. We would need the GTT tracking to monitor the fence on the
normal GTT view (the rotated view doesn't even have a fence). Not quite
sure how we should program the fence Y offset etc. in that case. For now
we'll end up disabling FBC with 90/270 degree rotation. Add a FIXME
to remind people about this fact.
v2: Reword the text (Chris)
Move the FIXME to the fbc code
Cc: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
As only a subset of primary planes are FBC capable there's no need
to waste fences on all of them. So let's skip the fence if the plane
isn't even fbc capable.
In the future we might extend this to skip the fence even for FBC
capable planes if the crtc and/or plane state isn't suitable
for FBC.
Cc: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Currently we pin a fence on every plane doing tiled scanout. The
number of planes we have available is fast apporaching the number
of fences so we really should stop wasting them. Only FBC needs
the fence on gen4+, so let's use fences only for the primary planes
on those platforms.
v2: drop the tiling check from plane_uses_fence() as the obj is
NULL during initial_plane_config() and we don't rally need the
check since i915_vma_pin_fence() does the check anyway
Cc: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Some panels support limited range output (16-235) compared
to full range RGB values (0-255). Also userspace can control
the RGB range using "Broadcast RGB" property. Currently the
code to handle full range to limited range is broken. This
patch fixes the same by properly scaling down all the full
range co-efficients with limited range scaling factor.
v2: Fixed Ville's review comments.
v3: Changed input to const and used correct data types as
suggested by Ville
v4: Fixed some missing data type corrections.
Signed-off-by: Johnson Lin <[email protected]>
Signed-off-by: Uma Shankar <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
It turns out that HSW has a register that tells us how many EUs are
disabled per half-slice (roughly a similar notion to subslice). We
didn't read those registers so far as most userspace drivers didn't
need those values prior to Gen8, but an internal library would like to
have access to this.
Since we already have the getparam interface, there is no harm in
exposing this.
v2: Rename bits value (Joonas)
v3: s/GEM_BUG_ON/MISSING_CASE/ (Joonas)
v4: s/GEM_BUG_ON/MISSING_CASE/ again... (Lionel)
Signed-off-by: Lionel Landwerlin <[email protected]>
Reviewed-by: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
This is the current PCI ID list in our documentation.
Let's leave the _gt#_ part out for now since our current documentation
is not 100% clear and we don't need this info now anyway.
v2: Use the new ICL_11 naming (Kelvin Gardiner).
v3: Latest IDs as per BSpec (Oscar).
v4: Make it compile (Paulo).
v5: Remove comments (Lucas).
v6: Multile rebases (Paulo).
v7: Rebase (Mika)
Reviewed-by: Anuj Phogat <[email protected]> (v1)
Signed-off-by: Paulo Zanoni <[email protected]>
Signed-off-by: Oscar Mateo <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Mika Kuoppala <[email protected]>
Reviewed-by: Michel Thierry <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
We want to de-emphasize the link between the request (dependency,
execution and fence tracking) from GEM and so rename the struct from
drm_i915_gem_request to i915_request. That is we may implement the GEM
user interface on top of requests, but they are an abstraction for
tracking execution rather than an implementation detail of GEM. (Since
they are not tied to HW, we keep the i915 prefix as opposed to intel.)
In short, the spatch:
@@
@@
- struct drm_i915_gem_request
+ struct i915_request
A corollary to contracting the type name, we also harmonise on using
'rq' shorthand for local variables where space if of the essence and
repetition makes 'request' unwieldy. For globals and struct members,
'request' is still much preferred for its clarity.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Michał Winiarski <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Mika Kuoppala <[email protected]>
Reviewed-by: Michał Winiarski <[email protected]>
Acked-by: Joonas Lahtinen <[email protected]>
LVDS startup fixes, enable VSP compositor on GEN3
* 'drm/next/du' of git://linuxtv.org/pinchartl/media:
drm: rcar-du: lvds: Refactor LVDS startup
drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen3
drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2
drm: rcar-du: lvds: Fix LVDS clock frequency range
drm: rcar-du: lvds: Fix LVDCR1 for R-Car gen3
drm: rcar-du: Enable VSP compositor by default on Gen3
drm: rcar-du: Calculate DPLLCR to be more small jitter
drm: rcar-du: Use 1000 to avoid misunderstanding in rcar_du_dpll_divider()
drm: rcar-du: Remove zpos field from rcar_du_vsp_plane_state structure
To be able to use DRI_PRIME with amdgpu and i915 we add all our fences
only as exclusive ones.
Disable that behavior when sharing between amdgpu itself cause it
hinders concurrent execution.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Instead of the pin/unpin callback implement the attach/detach ones.
Functional identical, but allows us access to the attachment.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Rather than trusting the cached value of plane_state->vma->fence to
imply whether the plane_state itself holds a reference on the
framebuffer's fence, use the information provided in the
plane_state->flags (PLANE_HAS_FENCE). Note that we still assume that FBC
is entirely bounded by the plane_state active life span; it's not clear
if that is a safe assumption.
Suggested-by: Ville Syrjälä <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
i965 and g4x still have the pipe select bits in the plane control
registers, they're just hardcoded to select a specific pipe. However
plane C on i965 can still move between the pipes, thus we should
program the pipe select bits on i965 if we want to expose plane C
some day.
Since there is no harm in programming the bits on any plane on
i965/g4x let's just always set them. This will also make our
pre-computed register value match what the hardware register
would read, should we want to cross check the two.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Mika Kahola <[email protected]>
G4x cursor control registers still allow us to write to the pipe select
bits even though cursors are supposed to be fixed to a specific pipe.
Bspec tells us that we should only ever write 0 to these bits. Let's
follow that recommendation. On ilk+ the bits become hardwired to 0.
Also looks like ICL repurposes these bits for some other use, so
we had better stop setting them to bogus values there.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Mika Kahola <[email protected]>
Add some compile time assrts to the frontbuffer tracking to make sure
that we have enough bits per pipe to cover all the planes, and that we
have enough total bits to cover all the planes across all pipes.
We'll ignore any potential clash between the overlay bit and the
plane bits because that will allow us to keep using a total of 32
bits for the foreseeable future.
While at it change the macros to use BIT() and GENMASK(). The latter
gets rid of the hardcoded 0xff and thus means we can change the
number of bits per pipe by just changing
INTEL_FRONTBUFFER_BITS_PER_PIPE.
Cc: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
