Some mmio devices have a dedicated interface clock that needs
to be enabled to access their registers. This patch optionally
enables a clock before accessing registers in the regmap_bus
callbacks.
I added (devm_)regmap_init_mmio_clk variants of the init
functions that have an added clk_id string parameter. This
is passed to clk_get to request the clock from the clk
framework.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
In preparation to support the regmap debugfs ranges functionality
factor this code out to a separate function. We'll need to ensure
that the value has been correctly calculated from two separate places
in the code.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Optimize this so that we can better guess where to start scanning
from. We know the length of the register field format, therefore
given the file pointer position align to the nearest register
field and scan from there onwards. We round down in this calculation
and we let the rest of the code figure out where to start scanning
from.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
We are keeping track of the maximum register as well, this will make
things easier for us in sharing this code with the code implementing
the register ranges functionality. It also simplifies a bit the
calculations when looking for the relevant block:offset from within
the cache.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
At the moment, if the length of the register field format is
N bytes, we can only get anything meaningful back to userspace
by providing a buffer that is N + 2 bytes large. Fix this
so we that we only need to provide a buffer of N bytes.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This fixes:
drivers/base/regmap/regmap.c: In function 'regmap_async_complete_cb':
drivers/base/regmap/regmap.c:1656:3: error: 'TASK_NORMAL' undeclared (first use in this function)
drivers/base/regmap/regmap.c:1656:3: note: each undeclared identifier is reported only once for each function it appears in
drivers/base/regmap/regmap.c: In function 'regmap_async_complete':
drivers/base/regmap/regmap.c:1688:2: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
drivers/base/regmap/regmap.c:1688:2: error: implicit declaration of function 'schedule'
An alternative might be to adjust linux/wait.h to include linux/sched.h,
but since that hasn't been done before, I assume we're consciously
avoiding doing that.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Some use cases like firmware download can transfer a lot of data in quick
succession. With high speed buses these use cases can benefit from having
multiple transfers scheduled at once since this allows the bus to minimise
the delay between transfers.
Support this by adding regmap_raw_write_async(), allowing raw transfers to
be scheduled, and regmap_async_complete() to wait for them to finish.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit adds provision for "no-bus" usage of the regmap API. In
this configuration user can provide API with two callbacks 'reg_read'
and 'reg_write' which are to be called when reads and writes to one of
device's registers is performed. This is useful for devices that
expose registers but whose register access sequence does not fit the 'bus'
abstraction.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Gcc warns about the case where regmap_read_debugfs tries to walk an
empty map->debugfs_off_cache list, which would results in uninitialized
variable getting returned, if we hadn't checked the same condition
just before that.
After an originally suggested inferior patch from Arnd Bergmann,
this is the solution that Russell King came up with, sidestepping
the problem by merging the error case for an empty list with the
normal path.
Without this patch, building mxs_defconfig results in:
drivers/base/regmap/regmap-debugfs.c: In function 'regmap_read_debugfs':
drivers/base/regmap/regmap-debugfs.c:147:9: : warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
Reported-by: Vincent Stehle <v-stehle@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[ We should make fun of people who can't speel too, but then we'd have
no time for any real work at all - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the requested firmware file size is 0 bytes in the filesytem, we
will try to vmalloc(0), which causes a warning:
vmalloc: allocation failure: 0 bytes
kworker/1:1: page allocation failure: order:0, mode:0xd2
__vmalloc_node_range+0x164/0x208
__vmalloc_node+0x4c/0x58
vmalloc+0x38/0x44
_request_firmware_load+0x220/0x6b0
request_firmware+0x64/0xc8
wl18xx_setup+0xb4/0x570 [wl18xx]
wlcore_nvs_cb+0x64/0x9f8 [wlcore]
request_firmware_work_func+0x94/0x100
process_one_work+0x1d0/0x750
worker_thread+0x184/0x4ac
kthread+0xb4/0xc0
To fix this, check whether the file size is less than or equal to zero
in fw_read_file_contents().
Cc: stable <stable@vger.kernel.org> [3.7]
Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't want to bomb out early if we failed to get the cache any more,
just soldier on instead and we won't get confused and always return the
first block.
Reported-by: Philipp Zabel <p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The debugfs optimisations merged in v3.8 weren't my finest hour, there
were a number of cases that the more complex algorithm made worse
especially around the error handling. This patch series should address
those issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=unOt
-----END PGP SIGNATURE-----
Merge tag 'regmap-debugfs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap debugfs optimisation fixes from Mark Brown:
"The debugfs optimisations merged in v3.8 weren't my finest hour, there
were a number of cases that the more complex algorithm made worse
especially around the error handling. This patch series should
address those issues."
* tag 'regmap-debugfs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Make sure we store the last entry in the offset cache
regmap: debugfs: Ensure a correct return value for empty caches
regmap: debugfs: Discard the cache if we fail to allocate an entry
regmap: debugfs: Fix check for block start in cached seeks
regmap: debugfs: Fix attempts to read nonexistant register blocks
This commit is a preparatory commit to provide "no-bus" configuration
option for regmap API. It adds necessary plumbing needed to have the
ability to provide user define register write function.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is a preparatory commit to provide "no-bus" configuration
option for regmap API. It adds necessary plumbing needed to have the
ability to provide user define register read function.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Since regmap already has support for formatting 24 bit wide values, so adding
support for 24 bit wide registers is pretty much straight forward.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Rather than trying to soldier on with a partially allocated cache just
throw the cache away and pretend we don't have one in case we can get a
full cache next time around.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Return the start of the last block we tried to read rather than a position,
and also make sure we update the byte position while we're at it. Without
this reads that go into nonexistant areas get confused.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Currently, the PM core disables runtime PM for all devices right
after executing subsystem/driver .suspend() callbacks for them
and re-enables it right before executing subsystem/driver .resume()
callbacks for them. This may lead to problems when there are
two devices such that the .suspend() callback executed for one of
them depends on runtime PM working for the other. In that case,
if runtime PM has already been disabled for the second device,
the first one's .suspend() won't work correctly (and analogously
for resume).
To make those issues go away, make the PM core disable runtime PM
for devices right before executing subsystem/driver .suspend_late()
callbacks for them and enable runtime PM for them right after
executing subsystem/driver .resume_early() callbacks for them. This
way the potential conflitcs between .suspend_late()/.resume_early()
and their runtime PM counterparts are still prevented from happening,
but the subtle ordering issues related to disabling/enabling runtime
PM for devices during system suspend/resume are much easier to avoid.
Reported-and-tested-by: Jan-Matthias Braun <jan_braun@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: 3.4+ <stable@vger.kernel.org>
Local variable 'error' in dev_pm_qos_add_ancestor_request() need
not contain error codes only, so rename it to 'ret'.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This wasn't implemented but happened to work on test systems due to lack
of wake mask inversion support.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
If the interrupt status registers are a single block of registers and the
chip supports bulk reads then do a single bulk read rather than pay the
extra I/O cost. This restores the original behaviour which was lost when
support for register striding was added.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
While for I2C and SPI devices the overhead of using rbtree for devices with
only one block of registers is negligible the same isn't always going to
be true for MMIO devices where the I/O costs are very much lower. Cater
for these devices by adding a simple flat array type for them where the
lookups are simple array accesses, taking us right back to the original
ASoC cache implementation.
Thanks to Magnus Damm for the discussion which prompted this.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
regmap-irq framework is used vastly by mfd drivers and some of
devices like TPS65910, TPS80036 do not support the wake base
register to enable wake.
Currently wake in regmap-irq only supported if client driver
passes the wake base register.
As the regmap-irq is mostly used by mfd devices and it is require
to have wake support from these devices in most of use cases,
enabling wake support by default in regmap-irq.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Where we can pass in LOOKUP_DIRECTORY or LOOKUP_REVAL. Any other flags
passed in here are currently ignored.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We never really clarified if unmap could be done in atomic context.
But since mapping might require sleeping, this implies mutex in use
to synchronize mapping/unmapping, so unmap could sleep as well. Add
a might_sleep() to clarify this.
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Pull x86 RAS update from Ingo Molnar:
"Rework all config variables used throughout the MCA code and collect
them together into a mca_config struct. This keeps them tightly and
neatly packed together instead of spilled all over the place.
Then, convert those which are used as booleans into real booleans and
save some space. These bits are exposed via
/sys/devices/system/machinecheck/machinecheck*/"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, MCA: Finish mca_config conversion
x86, MCA: Convert the next three variables batch
x86, MCA: Convert rip_msr, mce_bootlog, monarch_timeout
x86, MCA: Convert dont_log_ce, banks and tolerant
drivers/base: Add a DEVICE_BOOL_ATTR macro
Pull media updates from Mauro Carvalho Chehab:
- Missing MAINTAINERS entries were added for several drivers
- Adds V4L2 support for DMABUF handling, allowing zero-copy buffer
sharing between V4L2 devices and GPU
- Got rid of all warnings when compiling with W=1 on x86
- Add a new driver for Exynos hardware (s3c-camif)
- Several bug fixes, cleanups and driver improvements
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (243 commits)
[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[media] omap3isp: Prepare/unprepare clocks before/after enable/disable
[media] omap3isp: preview: Add support for 8-bit formats at the sink pad
[media] omap3isp: Replace printk with dev_*
[media] omap3isp: Find source pad from external entity
[media] omap3isp: Configure CSI-2 phy based on platform data
[media] omap3isp: Add PHY routing configuration
[media] omap3isp: Add CSI configuration registers from control block to ISP resources
[media] omap3isp: Remove unneeded module memory address definitions
[media] omap3isp: Use monotonic timestamps for statistics buffers
[media] uvcvideo: Fix control value clamping for unsigned integer controls
[media] uvcvideo: Mark first output terminal as default video node
[media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
[media] uvcvideo: Return -ENOTTY for unsupported ioctls
[media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
[media] uvcvideo: Don't fail when an unsupported format is requested
[media] uvcvideo: Return -EACCES when trying to access a read/write-only control
[media] uvcvideo: Set error_idx properly for extended controls API failures
[media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
[media] fc2580: write some registers conditionally
...
We need a node which only contains movable memory. This feature is very
important for node hotplug. If a node has normal/highmem, the memory may
be used by the kernel and can't be offlined. If the node only contains
movable memory, we can offline the memory and the node.
All are prepared, we can actually introduce N_MEMORY.
add CONFIG_MOVABLE_NODE make we can use it for movable-dedicated node
[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.
The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quite a few enhancements this time around, helpers and diagnostics for
the most part which is good to see:
- Addition of table based lookups for the register access checks from
Davide Ciminaghi, making life easier for drivers with big blocks of
similar registers.
- Allow drivers to get the irqdomain for regmap irq_chips, allowing the
domain to be used with other APIs.
- Debug improvements for paged register maps.
- Performance improvments for some of the diagnostic infrastructure,
very helpful for devices with large register maps.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Jy7K
-----END PGP SIGNATURE-----
Merge tag 'regmap-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Quite a few enhancements this time around, helpers and diagnostics for
the most part which is good to see:
- Addition of table based lookups for the register access checks from
Davide Ciminaghi, making life easier for drivers with big blocks of
similar registers.
- Allow drivers to get the irqdomain for regmap irq_chips, allowing
the domain to be used with other APIs.
- Debug improvements for paged register maps.
- Performance improvments for some of the diagnostic infrastructure,
very helpful for devices with large register maps."
* tag 'regmap-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Cache offsets of valid regions for dump
regmap: debugfs: Factor out initial seek
regmap: debugfs: Avoid overflows for very small reads
regmap: Cache register and value sizes for debugfs
regmap: introduce tables for readable/writeable/volatile/precious checks
regmap: core: Report registers in hex when we can't cache
regmap: Fix printing of size_t variable
regmap: make lock/unlock functions customizable
regmap: silence GCC warning
regmap: Split raw writes that cross window boundaries
regmap: Make return code checks consistent
regmap: Factor range lookup out of page selection
regmap: Provide debugfs read of register ranges
regmap: Factor out debugfs register read
regmap: Allow ranges to be named
regmap: When we sanity check during range adds say what errors we find
regmap: Rename n_ranges to num_ranges
regmap: irq: Allow users to retrieve the irq_domain
