When we switched over from binder_ctl.h to binderfs.h we forgot to change
the include guards. It's minor but it's obviously correct.
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Often userspace doesn't know when the kernel will be calling dma_buf_detach
on the buffer.
If userpace starts its CPU access at the same time as the sg list is being
freed it could end up accessing the sg list after it has been freed.
Thread A Thread B
- DMA_BUF_IOCTL_SYNC IOCT
- ion_dma_buf_begin_cpu_access
- list_for_each_entry
- ion_dma_buf_detatch
- free_duped_table
- dma_sync_sg_for_cpu
Fix this by getting the ion_buffer lock before freeing the sg table memory.
Fixes: 2a55e7b5e5 ("staging: android: ion: Call dma_map_sg for syncing and mapping")
Signed-off-by: Liam Mark <[email protected]>
Acked-by: Laura Abbott <[email protected]>
Acked-by: Andrew F. Davis <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit cbffaf7aa0 ("can: flexcan: Always use last mailbox for TX")
introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb)
and in the body accessed regs->mb[i] which is an out-of-bounds array
access that then resulted in an access to an reserved register area.
Later this was changed by commit 0517961ccd ("can: flexcan: Add
provision for variable payload size") to iterate a bit differently but
still runs one iteration too much resulting to call
flexcan_get_mb(priv, priv->mb_count)
which results in a WARN_ON and then a NULL pointer exception. This
only affects devices compatible with "fsl,p1010-flexcan",
"fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan",
"fsl,imx28-flexcan", so newer i.MX SoCs are not affected.
Fixes: cbffaf7aa0 ("can: flexcan: Always use last mailbox for TX")
Signed-off-by: Uwe Kleine-König <[email protected]>
Cc: linux-stable <[email protected]> # >= 4.20
Signed-off-by: Marc Kleine-Budde <[email protected]>
Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup()
when the conversion into ktime multiplies the given value with NSEC_PER_USEC
(1000).
Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2
Add a check for the given tv_usec, so that the value stays below one second.
Additionally limit the tv_sec value to a reasonable value for CAN related
use-cases of 400 days and ensure all values to be positive.
Reported-by: Kyungtae Kim <[email protected]>
Tested-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Cc: linux-stable <[email protected]> # >= 2.6.26
Tested-by: Kyungtae Kim <[email protected]>
Acked-by: Andre Naujoks <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
This patch revert commit 7da11ba5c5
("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
After introduction of this change we encountered following new error
message on various i.MX plattforms (flexcan):
| flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non
| existing skb: can_priv::echo_skb[0]
The introduction of the message was a mistake because
priv->echo_skb[idx] = NULL is a perfectly valid in following case: If
CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type
of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In
this case can_put_echo_skb will not set priv->echo_skb[idx]. It is
therefore kept NULL.
As additional argument for revert: The order of check and usage of idx
was changed. idx is used to access an array element before checking it's
boundaries.
Signed-off-by: Manfred Schlaegl <[email protected]>
Fixes: 7da11ba5c5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Although TMDS clock is required for HDMI to properly function,
nobody called clk_prepare_enable(). This fixes reference counting
issues and makes sure clock is running when it needs to be running.
Due to TDMS clock being parent clock for DDC clock, TDMS clock
was turned on/off for each EDID probe, causing spurious failures
for certain HDMI/DVI screens.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Priit Laes <[email protected]>
[Maxime: Moved the TMDS clock enable earlier]
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
The geni set/get_mctrl() functions currently do nothing unless
hardware flow control is enabled. Remove this arbitrary limitation.
Suggested-by: Johan Hovold <[email protected]>
Fixes: 8a8a66a1a1 ("tty: serial: qcom_geni_serial: Add support for flow control")
Signed-off-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The SPDX license identifier and the boiler plate text are
contradicting. Only the SPDX license identifier is needed. The
other one is removed.
Fixes: 86958dcc5a ("mmc: dw_mmc-bluefield: Add driver extension")
Cc: [email protected]
Reviewed-by: David Woods <[email protected]>
Signed-off-by: Liming Sun <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlxGjXAUHHdpbGx5QGlu
ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5L4Qf8DQaaA9aDsZ66CGaxExfxiEMM2SEl
Ns02XTgVWvXUPI2zHU6oZGBgWOY2jysy688WJZH7FlFJVzHytbZ26ZG6sabVD271
WQJnjSeZwNnCF0ZJP/mbr6SKkZHOaAxWRgeXJQFPvke58gMxj9w7a2qU5OEBcbS2
nUCk5LzqQHveH0UYQJJGvKca/p8f2h0Y28+BG5YRWo1ivEDAf6LaD2ItTOv5Jf/4
lfaW48h/ObBNMaor+0fn8Po5TtP9R8vgBGDt5XRjiTy0yXEq62HwTCHjOydqywTA
pyEN8zZMtOwDjz9eEm+WPR3bLcOmLK+i0+oRFpM7tNl+iq/i0DCjxpJ+eQ==
=56qs
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements"
* tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax:
XArray: Fix an arithmetic error in xa_is_err
XArray tests: Check mark 2 gets squashed
XArray: Fix typo in comment
XArray: Honour reserved entries in xa_insert
XArray: Permit storing 2-byte-aligned pointers
XArray: Change xa_for_each iterator
XArray: Turn xa_init_flags into a static inline
XArray tests: Add RCU locking
gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
One fix only for now:
- Fix probe deferral in iommu/of code (broke with recent changes
to iommu_ops->add_device invocation)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+93K
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"One fix only for now: Fix probe deferral in iommu/of code (broke with
recent changes to iommu_ops->add_device invocation)"
* tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/of: Fix probe-deferral
- Perf support for raw events
- boot log printing: return stack, action points
- fix memset to avoid prefetchw bleeding past end of buffer
- do_page_fault fix for mmap_sem held while returning to userspace
- other miscll fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QMUe
-----END PGP SIGNATURE-----
Merge tag 'arc-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC architecture updates from Vineet Gupta:
- Perf support for raw events
- boot log printing: return stack, action points
- fix memset to avoid prefetchw bleeding past end of buffer
- do_page_fault fix for mmap_sem held while returning to userspace
- other misc fixes
* tag 'arc-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: lib: memeset: fix doing prefetchw outside of buffer
ARC: mm: do_page_fault fixes#1: relinquish mmap_sem if signal arrives while handle_mm_fault
ARC: show_regs: lockdep: re-enable preemption
ARC: show_regs: lockdep: avoid page allocator...
ARC: perf: avoid kernel killing where it is possible
ARC: perf: move HW events mapping to separate function
ARC: perf: introduce Kernel PMU events support
ARC: perf: trivial code cleanup
ARC: perf: map generic branches to correct hardware condition
ARC: adjust memblock_reserve of kernel memory
arc: remove redundant kernel-space generic-y
ARC: fix __ffs return value to avoid build warnings
ARC: boot log: print Action point details
ARCv2: boot log: BPU return stack depth
Current simple-card is using asoc_simple_card_canonicalize_dailink().
Its naming is "dailink", but is for "platform".
We already have asoc_simple_card_canonicalize_cpu() for "cpu",
let's follow same naming rule.
It never return error, so, void function is better idea.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
We can use for_each_link_codecs() without waiting
for_each_rtd_codec_dai() on soc_bind_dai_link().
Let's use for_each macro
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
We need to cleanup component when soc_probe_component() was
failed, or when soc_remove_component() was called.
But they are cleanuping component on each way.
(And soc_probe_component() doesn't call snd_soc_dapm_free(),
but it should).
Same code in many places makes code un-understandable.
This patch adds new soc_cleanup_component() and call it from
snd_probe_component() and snd_remove_component().
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Deep nested codec is not readable.
Let's reduce if/else nest.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
We need to cleanup card resources when snd_soc_instantiate_card() was
failed, or when snd_soc_unbind_card() was called.
But they are cleanuping card resources on each way.
Same code in many places makes code un-understandable.
This patch reuses soc_cleanup_card_resources() for cleanuping code
resource. Then, it makes avoiding cleanup order.
It will be called from snd_soc_instantiate_card() and
snd_soc_unbind_card().
Then, original soc_cleanup_card_resources() included
snd_soc_flush_all_delayed_work(), but it is now separated.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
soc-core is calling flush_delayed_work() many times for same purpose.
Same code in many places makes code un-understandable.
This patch adds new snd_soc_flush_all_delayed_work() for it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Current snd_soc_dai_link is starting to use snd_soc_dai_link_component
(= modern) style for Platform, but it is still assuming single Platform
so far. We will need to have multi Platform support in the not far
future.
Currently only simple card is using it as sound card driver,
and other drivers are converted to it from legacy style by
snd_soc_init_platform().
To avoid future problem of multi Platform support, let's add
num_platforms before it is too late.
In the same time, to make it same naming mothed, "platform" should
be "platforms". This patch fixup it too.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
The _DSM function number validation only happens to succeed when the
generic Linux command number translation corresponds with a
DSM-family-specific function number. This breaks NVDIMM-N
implementations that correctly implement _LSR, _LSW, and _LSI, but do
not happen to publish support for DSM function numbers 4, 5, and 6.
Recall that the support for _LS{I,R,W} family of methods results in the
DIMM being marked as supporting those command numbers at
acpi_nfit_register_dimms() time. The DSM function mask is only used for
ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices.
Fixes: 31eca76ba2 ("nfit, libnvdimm: limited/whitelisted dimm command...")
Cc: <[email protected]>
Link: https://github.com/pmem/ndctl/issues/78
Reported-by: Sujith Pandel <[email protected]>
Tested-by: Sujith Pandel <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
In preparation for using function number 0 as an error value, prevent it
from being considered a valid function value by acpi_nfit_ctl().
Cc: <[email protected]>
Cc: stuart hayes <[email protected]>
Fixes: e02fb7264d ("nfit: add Microsoft NVDIMM DSM command set...")
Reported-by: Jeff Moyer <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
The following warning:
ACPI0012:00: security event setup failed: -19
...is meant to capture exceptional failures of sysfs_get_dirent(),
however it will also fail in the common case when security support is
disabled. A few issues:
1/ A dev_warn() report for a common case is too chatty
2/ The setup of this notifier is generic, no need for it to be driven
from the nfit driver, it can exist completely in the core.
3/ If it fails for any reason besides security support being disabled,
that's fatal and should abort DIMM activation. Userspace may hang if
it never gets overwrite notifications.
4/ The dirent needs to be released.
Move the call to the core 'dimm' driver, make it conditional on security
support being active, make it fatal for the exceptional case, add the
missing sysfs_put() at device disable time.
Fixes: 7d988097c5 ("...Add security DSM overwrite support")
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
The override status function needs to be updated to use the proper
request parameter in order to get the security state.
Fixes: 3c13e2ac74 ("...Add test support for Intel nvdimm security DSMs")
Reported-by: Vishal Verma <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Some tty line disciplines do not have a receive buf callback, so
properly check for that before calling it. If they do not have this
callback, just eat the character quietly, as we can't fail this call.
Reported-by: Jann Horn <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The risk of redundant IO accounting was not taken into consideration
when commit 18a25da843 ("dm: ensure bio submission follows a
depth-first tree walk") introduced IO splitting in terms of recursion
via generic_make_request().
Fix this by subtracting the split bio's payload from the IO stats that
were already accounted for by start_io_acct() upon dm_make_request()
entry. This repeat oscillation of the IO accounting, up then down,
isn't ideal but refactoring DM core's IO splitting to pre-split bios
_before_ they are accounted turned out to be an excessive amount of
change that will need a full development cycle to refine and verify.
Before this fix:
/dev/mapper/stripe_dev is a 4-way stripe using a 32k chunksize, so
bios are split on 32k boundaries.
# fio --name=16M --filename=/dev/mapper/stripe_dev --rw=write --bs=64k --size=16M \
--iodepth=1 --ioengine=libaio --direct=1 --refill_buffers
with debugging added:
[103898.310264] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=0 len=128
[103898.318704] device-mapper: core: __split_and_process_bio: recursing for following split bio:
[103898.329136] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=64 len=64
...
16M written yet 136M (278528 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
278528
After this fix:
16M written and 16M (32768 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
32768
Fixes: 18a25da843 ("dm: ensure bio submission follows a depth-first tree walk")
Cc: [email protected] # 4.16+
Reported-by: Bryan Gurney <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
DM's clone_bio() now benefits from using bio_trim() by fixing the fact
that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
which triggers blk_recount_segments() via bio_phys_segments().
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Precise and non-ambiguous license information is important. The recently
added quota.c file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.
SPDX-License-Identifier: GPL-2.0
versus
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
Oh well.
As the other ceph related files are licensed under the GPL v2 only, it's
assumed that the SPDX id is correct and the boiler plate was randomly
copied into that patch.
Remove the boiler plate as it is wrong and even if correct it is redundant.
Fixes: fb18a57568 ("ceph: quota: add initial infrastructure to support cephfs quotas")
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Luis Henriques <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: "Yan, Zheng" <[email protected]>
Cc: Sage Weil <[email protected]>
Cc: Ilya Dryomov <[email protected]>
Cc: [email protected]
Acked-by: Luis Henriques <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():
libceph user thread ceph-msgr worker
ceph_con_keepalive()
mutex_lock(&con->mutex)
clear_standby(con)
mutex_unlock(&con->mutex)
mutex_lock(&con->mutex)
con_fault()
...
if KEEPALIVE_PENDING isn't set
set state to STANDBY
...
mutex_unlock(&con->mutex)
set KEEPALIVE_PENDING
set WRITE_PENDING
This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.
I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.
Reported-by: [email protected]
Signed-off-by: Ilya Dryomov <[email protected]>
Tested-by: Myungho Jung <[email protected]>
snap realm and corresponding inode have pointers to each other.
The two pointer should get clear at the same time. Otherwise,
snap realm's pointer may reference freed inode.
Cc: [email protected] # 4.17+
Signed-off-by: "Yan, Zheng" <[email protected]>
Reviewed-by: Luis Henriques <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:
e38513905e ("locking/rwsem: Rework zeroing reader waiter->task")
relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.
[ peterz: Added changelog. ]
Signed-off-by: Xie Yongji <[email protected]>
Signed-off-by: Zhang Yu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: e38513905e ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
We must not rely on wake_q_add() to delay the wakeup; in particular
commit:
1d0dcb3ad9 ("futex: Implement lockless wakeups")
moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which
could result in futex_wait() waking before observing ->lock_ptr ==
NULL and going back to sleep again.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 1d0dcb3ad9 ("futex: Implement lockless wakeups")
Signed-off-by: Ingo Molnar <[email protected]>
Notable cmpxchg() does not provide ordering when it fails, however
wake_q_add() requires ordering in this specific case too. Without this
it would be possible for the concurrent wakeup to not observe our
prior state.
Andrea Parri provided:
C wake_up_q-wake_q_add
{
int next = 0;
int y = 0;
}
P0(int *next, int *y)
{
int r0;
/* in wake_up_q() */
WRITE_ONCE(*next, 1); /* node->next = NULL */
smp_mb(); /* implied by wake_up_process() */
r0 = READ_ONCE(*y);
}
P1(int *next, int *y)
{
int r1;
/* in wake_q_add() */
WRITE_ONCE(*y, 1); /* wake_cond = true */
smp_mb__before_atomic();
r1 = cmpxchg_relaxed(next, 1, 2);
}
exists (0:r0=0 /\ 1:r1=0)
This "exists" clause cannot be satisfied according to the LKMM:
Test wake_up_q-wake_q_add Allowed
States 3
0:r0=0; 1:r1=1;
0:r0=1; 1:r1=0;
0:r0=1; 1:r1=1;
No
Witnesses
Positive: 0 Negative: 3
Condition exists (0:r0=0 /\ 1:r1=0)
Observation wake_up_q-wake_q_add Never 0 3
Reported-by: Yongji Xie <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
The only guarantee provided by wake_q_add() is that a wakeup will
happen after it, it does _NOT_ guarantee the wakeup will be delayed
until the matching wake_up_q().
If wake_q_add() fails the cmpxchg() a concurrent wakeup is pending and
that can happen at any time after the cmpxchg(). This means we should
not rely on the wakeup happening at wake_q_up(), but should be ready
for wake_q_add() to issue the wakeup.
The delay; if provided (most likely); should only result in more efficient
behaviour.
Reported-by: Yongji Xie <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
For some peculiar reason rcuwait_wake_up() has the right barrier in
the comment, but not in the code.
This mistake has been observed to cause a deadlock in the following
situation:
P1 P2
percpu_up_read() percpu_down_write()
rcu_sync_is_idle() // false
rcu_sync_enter()
...
__percpu_up_read()
[S] ,- __this_cpu_dec(*sem->read_count)
| smp_rmb();
[L] | task = rcu_dereference(w->task) // NULL
|
| [S] w->task = current
| smp_mb();
| [L] readers_active_check() // fail
`-> <store happens here>
Where the smp_rmb() (obviously) fails to constrain the store.
[ peterz: Added changelog. ]
Signed-off-by: Prateek Sood <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Andrea Parri <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 8f95c90ceb ("sched/wait, RCU: Introduce rcuwait machinery")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
- Fix console ramoops to show the previous boot logs (Sai Prakash Ranjan)
- Avoid allocation and leak of platform data
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <[email protected]>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=m6sX
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fixes from Kees Cook:
- Fix console ramoops to show the previous boot logs (Sai Prakash
Ranjan)
- Avoid allocation and leak of platform data
* tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Avoid allocation and leak of platform data
pstore/ram: Fix console ramoops to show the previous boot logs
Pull networking fixes from David Miller:
1) Fix endless loop in nf_tables, from Phil Sutter.
2) Fix cross namespace ip6_gre tunnel hash list corruption, from
Olivier Matz.
3) Don't be too strict in phy_start_aneg() otherwise we might not allow
restarting auto negotiation. From Heiner Kallweit.
4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue.
5) Memory leak in act_tunnel_key, from Davide Caratti.
6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn.
7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet.
8) Missing udplite rehash callbacks, from Alexey Kodanev.
9) Log dirty pages properly in vhost, from Jason Wang.
10) Use consume_skb() in neigh_probe() as this is a normal free not a
drop, from Yang Wei. Likewise in macvlan_process_broadcast().
11) Missing device_del() in mdiobus_register() error paths, from Thomas
Petazzoni.
12) Fix checksum handling of short packets in mlx5, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits)
bpf: in __bpf_redirect_no_mac pull mac only if present
virtio_net: bulk free tx skbs
net: phy: phy driver features are mandatory
isdn: avm: Fix string plus integer warning from Clang
net/mlx5e: Fix cb_ident duplicate in indirect block register
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
net/mlx5e: Fix wrong error code return on FEC query failure
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
tools: bpftool: Cleanup license mess
bpf: fix inner map masking to prevent oob under speculation
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
selftests: forwarding: Add a test case for externally learned FDB entries
selftests: mlxsw: Test FDB offload indication
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
net: bridge: Mark FDB entries that were added by user as such
mlxsw: spectrum_fid: Update dummy FID index
mlxsw: pci: Return error on PCI reset timeout
mlxsw: pci: Increase PCI SW reset timeout
mlxsw: pci: Ring CQ's doorbell before RDQ's
MAINTAINERS: update email addresses of liquidio driver maintainers
...
Yue Hu noticed that when parsing device tree the allocated platform data
was never freed. Since it's not used beyond the function scope, this
switches to using a stack variable instead.
Reported-by: Yue Hu <[email protected]>
Fixes: 35da60941e ("pstore/ram: add Device Tree bindings")
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
GCC 9 reworks the way the references to the stack canary are
emitted, to prevent the value from being spilled to the stack
before the final comparison in the epilogue, defeating the
purpose, given that the spill slot is under control of the
attacker that we are protecting ourselves from.
Since our canary value address is obtained without accessing
memory (as opposed to pre-v7 code that will obtain it from a
literal pool), it is unlikely (although not guaranteed) that
the compiler will spill the canary value in the same way, so
let's just disable this improvement when building with GCC9+.
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
The ARM per-task stack protector GCC plugin hits an assert in
the compiler in some case, due to the fact the the SP mask
expression is not sign-extended as it should be. So fix that.
Suggested-by: Kugan Vivekanandarajah <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <[email protected]>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcPTc7AAoJECgfDbjSjVRpOEgH/Ahdx7VMYJtFsdmoJKiwhB7M
jRRi9R903V9H87vl1BXy6dutHw+WONJtm6FSZ1ayNWlVmUmWS6vci+IUErr2uDrv
KSG+dJMQLlF7t1dnLRwlLazvGa4/58+u0J459uKPQ5ckqwV5wXPjUS5Z0xF3ldxM
Twz6vhYRGKCUc10YZm/WmsjlLROgaNtRya10PzAGVmXPzbCpvJfiojKWJER+Eigq
JxWynTCm/YvIk824Ls9cDBVkDvb8GPS3blVbFnusR+D3ktvX7vLDPOsErGn4umVS
nUm3/WiQALB9fKer+SsgcEGVh+fa06KIITK+IBblULmrAIT3CJdJp70UJBjfdTM=
=DCkE
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: Use copy_to_iter() to send control queue response
vhost: return EINVAL if iovecs size does not match the message size
virtio-balloon: tweak config_changed implementation
virtio: don't allocate vqs when names[i] = NULL
virtio_pci: use queue idx instead of array idx to set up the vq
virtio: document virtio_config_ops restrictions
virtio: fix virtio_config_ops description
-----BEGIN PGP SIGNATURE-----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=hGlM
-----END PGP SIGNATURE-----
Merge tag 'for-5.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A handful of fixes (some of them in testing for a long time):
- fix some test failures regarding cleanup after transaction abort
- revert of a patch that could cause a deadlock
- delayed iput fixes, that can help in ENOSPC situation when there's
low space and a lot data to write"
* tag 'for-5.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: wakeup cleaner thread when adding delayed iput
btrfs: run delayed iputs before committing
btrfs: wait on ordered extents on abort cleanup
btrfs: handle delayed ref head accounting cleanup in abort
Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"
- A fix for OPTIMIZER_HIDE_VAR
From Michael S. Tsirkin
-----BEGIN PGP SIGNATURE-----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=2ce7
-----END PGP SIGNATURE-----
mergetag object 99e309b6ed
type commit
tag clang-format-for-linus-v5.0-rc3
tagger Miguel Ojeda <[email protected]> 1547999145 +0100
clang-format changes:
- Update of the for_each macro list
From Jason Gunthorpe
-----BEGIN PGP SIGNATURE-----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=mM3e
-----END PGP SIGNATURE-----
Merge tags 'compiler-attributes-for-linus-v5.0-rc3' and 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux
Pull misc clang fixes from Miguel Ojeda:
- A fix for OPTIMIZER_HIDE_VAR from Michael S Tsirkin
- Update clang-format with the latest for_each macro list from Jason
Gunthorpe
* tag 'compiler-attributes-for-linus-v5.0-rc3' of git://github.com/ojeda/linux:
include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR
* tag 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux:
clang-format: Update .clang-format with the latest for_each macro list
If an input number x for int_sqrt64() has the highest bit set, then
fls64(x) is 64. (1UL << 64) is an overflow and breaks the algorithm.
Subtracting 1 is a better guess for the initial value of m anyway and
that's what also done in int_sqrt() implicitly [*].
[*] Note how int_sqrt() uses __fls() with two underscores, which already
returns the proper raw bit number.
In contrast, int_sqrt64() used fls64(), and that returns bit numbers
illogically starting at 1, because of error handling for the "no
bits set" case. Will points out that he bug probably is due to a
copy-and-paste error from the regular int_sqrt() case.
Signed-off-by: Florian La Roche <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
