Check the link state during b44_open. This closes a 1 HZ window
that existed after b44_open ran but before the b44_timer handler ran,
during which ethtool would report "Link detected: yes" no matter what
the link state actually was.
Signed-off-by: John W. Linville <[email protected]>
This patch allows the tulip driver to suspend and resume properly. It was
originally written by Karsten Keil and then modified by Adam Belay.
Signed-off-by: Karsten Keil <[email protected]>
Signed-off-by: Adam Belay <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
drivers/net/wireless/prism54/isl_38xx.c:131: warning: 'current_time.tv_sec' is used uninitialized in this function
drivers/net/wireless/prism54/isl_38xx.c:131: warning: 'current_time.tv_usec' is used uninitialized in this function
Signed-off-by: Olaf Hering <[email protected]>
Some USB ethernet drivers did not accept multicast frames appropriately.
IPv6 did not work with those drivers without this patch.
Signed-off-by: YOSHIFUJI Hideaki <[email protected]>
Jeff,
Just incase this got lost in the recent netdev mailing list transition
here is a nicer version of Andy's patch for gianfar.
- kumar
* TCP/IP/UDP checksumming and verification
* VLAN tag insertion/extraction
* Larger multicast hash-table
* Padding to align IP headers
Also added:
* msg lvl support
* Some whitespace cleanup
Signed-off-by: Andy Fleming <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
The race causes a kernel oops when smc_hardware_send_pkt() tries to
dereference pending_tx_skb which would have been freed from one of the
driver reset paths just after the tx_task tasklet has been scheduled.
This race is possible on SMP but was uncovered by the kernel RT work.
Signed-off-by: Nicolas Pitre <[email protected]>
--Boundary-00=_F5lsC5eH1wGW5o9
Content-Type: text/plain;
charset="koi8-r"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hi Jeff,
In some messages in via-rhine.c there is a leading space
for no apparent reason. This patch removes it.
--
vda
--Boundary-00=_F5lsC5eH1wGW5o9
Content-Type: text/x-diff;
charset="koi8-r";
name="via-rhine.c.diff"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="via-rhine.c.diff"
Included proposals to false late collisions due to H/W latencies
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
Ethtool cleanup patch from Stephen Hemminger
* use ADVERTISED_xxx fields when setting advertised fields
* don't hardcode constant for advertised field
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
Fixed the loopback test failure for 82573 based adapters
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
Fixed register and loopback test failures with 82573 controllers
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
Cleanup debug message printed when Tx Unit hang is detected
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
Use correct WOL settings for 82544 adapters
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
NAPI performance enhancements - Fixed issues with shared interrupts and NAPI resulting in bad performance.
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
e100_eeprom_load was called after e100_phy_init causing phy_init
not to use values set in EEPROM - from [email protected]
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
Added patch from Eran Mann to fix following e100 MDI/MDI-X issues
* MDI/MDI-X autodetection should never be enabled for 82551ER/QM chips
* enabling this feature based on eeprom settings
Signed-off-by: Mallikarjuna R Chilakala <[email protected]>
Signed-off-by: Ganesh Venkatesan <[email protected]>
Signed-off-by: John Ronciak <[email protected]>
If the frame has ToDS flag set, mark it by setting skb->pkt_type to
PACKET_OTHERHOST, so that applications unaware of promiscous mode won't get
uplink (STA->AP) packets for STA->STA transmissions relayed by the AP.
Thanks to John Denker and David Gibson for finding the problem and the
solution.
Patch from Pavel Roskin
This patch is to provide support for cs89x0-based network device on
Philips' pnx0105 board.
Signed-off-by: dmitry pervushin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask()
These patches include dma-mapping.h explicitly because it caused errors
on some architectures otherwise.
See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details
Signed-off-by: Tobias Klauser <[email protected]>
Signed-off-by: Domen Puncer <[email protected]>
Use ssleep() / msleep_interruptible() [as appropriate]
instead of schedule_timeout() to guarantee the task delays as expected.
Signed-off-by: Nishanth Aravamudan <[email protected]>
Signed-off-by: Maximilian Attems <[email protected]>
Signed-off-by: Domen Puncer <[email protected]>
Use msleep_interruptible() instead of schedule_timeout() to
guarantee the task delays as expected.
Signed-off-by: Nishanth Aravamudan <[email protected]>
Signed-off-by: Maximilian Attems <[email protected]>
Signed-off-by: Domen Puncer <[email protected]>
Insert set_current_state() before schedule_timeout() so the
function delays as expected. Without the addition, schedule_timeout()
will return immediately.
Signed-off-by: Nishanth Aravamudan <[email protected]>
Signed-off-by: Maximilian Attems <[email protected]>
Signed-off-by: Domen Puncer <[email protected]>
Use ssleep() instead of nicedelay()
to guarantee the task delays as expected. Remove the prototype and
definition of nicedelay(). This is a very weird function, because it is
called to sleep in terms of usecs, but always sleeps for 1 second,
completely ignoring the parameter. I have gone ahead and followed suit,
just sleeping for a second in all cases, but maybe someone with the
hardware could tell me if perhaps the paramter *should* matter. Additionally,
nicedelay() is called in TASK_INTERRUPTIBLE state, but doesn't deal with signals
in case these longer delays do not complete, so I believe ssleep() is more
appropriate.
Signed-off-by: Nishanth Aravamudan <[email protected]>
Signed-off-by: Domen Puncer <[email protected]>
