details:
front camera ov32c4c and ov32b40 compatible
front camera ov32c4c bring up on 8350 baseline
Change-Id: Ibbab62bdfb9784bc302222d7794137d3ccfb2d5b
Signed-off-by: chenlj26 <chenlj26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2246392
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
-For ov32c4c,must write reg 0x1001=0x4 to switch iic addr to 0x20
before any iic operation.
-add preInitSetting,it will be wroten into sensor before init.
-add IICAddrSwitch,it will be wroten into sensor before probe.
Change-Id: I0d0d3959371355843fc4e384042e4ad44a42243d
Signed-off-by: chenlj26 <chenlj26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2218769
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
detalis:
switch the cci device to read the flash ID
Change-Id: Idf29474ca4946afb122339eeefe01b7dacfc0485
Signed-off-by: liuzy55 <liuzy55@motorola.com>
Reviewed-on: https://gerrit.mot.com/2191857
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Long Cheng <chengl1@motorola.com>
Tested-by: Jira Key
Reviewed-by: XiaoFeng Wang <wangxf32@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
-To eliminate the resonance noise during system vibrator vibrating, set actuator to
specified DAC position(480 on DW9714), then the resonance noise can be obviously improved.
To achieve the conbination between vibrator and camera AF actuator,we implemnte:
- Actuator separately control during camera power off.
- Actuator policy to avoid vibrating disturb normal camera AF.
port from (CR),fix berlna wide camera resonance noise issue.
-Port from (CR): cam/actuator: Add CCI access lock to avoid conflicts.
Usually actuator initial setting will execute power down reset(PD), actuator can't respond
CCI access for a while after PD. Add lock to avoid access actuator while PD operation.
-Port from (CR): cam/actuator: Create separate work queue for park lens.
Park lens may cost more than 100ms for different camera modules, create seperate
work queue for actuator to avoid park lens operation block system_wq too long.
-Port from (CR): cam/actautor: Optimizing park lens for vibrating.
Move lens to noise reduction postion after camera exited.
-Port from (CR): cam/actuator: Avoid error releasing CCI/regulator.
Avoid unbalanced aquire/release of CCI/regulator when actuator init failed.
Due to when CCI init for vibrator failed, regulators had been released.
-For new baseline sm8350,compile this standalone actuator diver into camera.ko
Change-Id: If77d10badfb4147c467ebae238f4e6af317d466f
Signed-off-by: wangshuo18 <wangshuo18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1906964
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Darong Huang <huangdra@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Xu Ji <jixu@motorola.com>
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Zhuoran Xu <xuzr3@motorola.com>
Reviewed-by: Bolei Shang <shangbl1@lenovo.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
-Add new fields to OIS data structures
-Add capability to program OIS more flexibly
Change-Id: I97988cc3a6d7fa2241016bd4a269618c8ff10ad0
Reviewed-on: https://gerrit.mot.com/1736525
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
Increase “OPE_MAX_CDM_BLS” to 32 from 24 and MAX_STRIPES to 64 from 48
to process 108M frame.
CRs-Fixed: 3082993
Change-Id: I9e3631cc86c5e10e4e2020d4a9b2264ea282e437
Signed-off-by: Vikram Sharma <vikramsa@codeaurora.org>
- Add Regulator power up for I2C flash
- Add GPIO support in probe call for I2C flash
- Add flash type in query capability call of flash.
CRs-Fixed: 2938804
Change-Id: I7d5575ecdf4c1c3b329e6bf49586771e37611e5a
Signed-off-by: shiwgupt <shiwgupt@codeaurora.org>
Add support for YUV422 format 10 bit in CSID and bus drivers.
CRs-Fixed: 2923254
Change-Id: Icecc367d88509b9ed08f5d0cab8c4da788886a0a
Signed-off-by: Gaurav Jindal <gjindal@codeaurora.org>
When camnoc fill level for RDI port goes beyond 25%, notify UMD
with BAD frames to take corrective actions.
CRs-Fixed: 2913934
Change-Id: I5427ce94cdd2a48d8647ff4593cb1605a2f90a37
Signed-off-by: Alok Pandey <akumarpa@codeaurora.org>
Add new packer format to support LSB alignment for plain16_10
packer format.
CRs-Fixed: 2825675
Change-Id: I401241dc14dc67d3b363d3d39b37aabe716e167c
Signed-off-by: Vikram Sharma <vikramsa@codeaurora.org>
Add support to dynamically switch pix_pattern of read clients
based on data received in each request.
CRs-Fixed: 2811530
Change-Id: Icb3ebd33cae59b8db87bc0011d6560492ad29c3a
Signed-off-by: Rishabh Jain <risjai@codeaurora.org>
Add UAPI definitions for output resources of new VFE hardware.
Add changes to get the max output resource value based on
hardware version, at the time of probe.
CRs-Fixed: 2794540
Change-Id: I5f11be0546012c5f806153c2fd6b0aeb993f5d93
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
msm: camera: cdm: Fix dangling pointer issue
msm: camera: cdm: change work record to atomic variable
msm: camera: utils: Adding device type to track device handles
msm: camera: tfe: Reduce stack footprint during bw vote
msm: camera: req_mgr: Thread switch delay detection mechanisms
msm: camera: cdm: Avoid submitting BL if FIFO is full
msm: camera: tfe: check cdm hang in the tfe config timeout
msm: camera: req_mgr: Delay detection mechanism
msm: camera: cdm: Debug info in case of cdm page fault
msm: camera: isp: Max context reduction for TFE in isp driver
msm: camera: ope: Maintain current clock value during acquire
msm: camera: req_mgr: Limit CAM_ERR log in case of no empty task
msm: camera: cdm: Decrement write-count only after Bl commit
msm: camera: isp: Added CSID recovery mechanism.
CRs-Fixed: 2792394
Change-Id: I1c7a903ae15b572acf3f6318cda7394cb6549c8d
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
In case large memory slot usage scene like MFHDR, MFSR.
increase kernel slot count to avoid out of memory issue.
CRs-Fixed: 2718732
Change-Id: I49dd2d9bdda548d5f95fa49c290364ecb6d40f6e
Signed-off-by: bohahuan <bohahuan@codeaurora.org>
Some customers have sensor mode with more blanking width.
Due to this, time is not sufficient for applying
setting thus resulted in frame drops.
To avoid this situation, epoch is calculated on complete
frame and configured at half the frame.
CRs-Fixed: 2757095
Change-Id: I92927c23762f717d6ddca67a7e641422e8fb6d8f
Signed-off-by: Shravya Samala <shravyas@codeaurora.org>
Define debug flag to allocate usecase info for debug purpose.
This flag can be used to get usecase buffer index at issue
time.
CRs-Fixed: 2707314
Change-Id: Iffacdb48f77ec6907b8070d4c19eb1c56be30f14
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Currently when page fault happen, iommu driver callers camera
handler with CB details and iova address which caused the page
fault. With iommu iova address cam smmu driver finds the
closest mapping address for that cb and call the
corresponding driver to find the which port caused page fault.
This has limitation has page fault address always not mapped.
New approach is get the page fault ids from iommu driver.
Based on the Pid and Mid values, get the HW id and port ids,
go through all context which has this hw id and port id and log
the data. Once context id is identified, log the acquire data and
last consumed client address details. Dump the hw register data
in the given buffer. Send the smmu page fault event through
v4l2 queue to user.
CRs-Fixed: 2750690
Change-Id: I87c809b3229992c7c95655a4f3c6c70ebc035ae8
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
This change extract the fuse info from DTSI and reads the fuse
value then communicate the same to user space using query_cpas_v2
ioctl.
CRs-Fixed: 2749665
Change-Id: Ie161dc58a7eab3e7b74a5c406ab696af0e7b546e
Signed-off-by: Vikram Sharma <vikramsa@codeaurora.org>
Add SYNC_V4L_EVENT_V2 support in sync driver. As part of this
change, added the reason code field as part of sync event header.
This failure reason code is filled by camera kernel driver and
propagate to userspace.
CRs-Fixed: 2750553
Change-Id: I206d0d51c38cfe4214814b89d241f51c1f50605b
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
-Add mipi flags mask to phy cmd buffer.
-Enable skew calibration settings only if the
corresponding flag is set.
CRs-fixed: 2697576
Change-Id: I0353e57daf49ce15d7573b57dbaa9363dbc59635
Signed-off-by: Shravan Nevatia <snevatia@codeaurora.org>
CSID is not able to recover from the fatal errors like lane
overflows, continuous unbound frames or ESD errors. To recover
from such errors, it is necessary to restart the sensor as
just starting the ISP hw do not make any change as the sensor
can still be in bad state.
This commit implements tasklet based CSID recovery mechanism.
On detecting an error in CSID interrupt, tasklet is scheduled
which in turn will call the ISP hw manager to notify the ISP
context, from here a notification is sent to CRM to send a
message to trigger full recovery. This full recovery includes
the sensor release and start.
This feature is debugfs based. Based on need this can be turned
on.
CRs-Fixed: 2642216
Change-Id: Iecf9916d3672d71a1367886cc934b5a2b148f918
Signed-off-by: Gaurav Jindal <gjindal@codeaurora.org>
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Currently lane enablement is happening as a part of lanemask
field, which is send by UMD. Lane enablement should be purely
depends on laneCnt and laneAssign attributes. Also, combo mode
sensors needs to come with combo mode flag set from the UMD.
This change updates the logic for lane enablement with respect
to laneAssign and laneCnt, and also covers all combomode selection
as per the request. This change also enables the sensors to acquire
and streamon/streamoff at anytime in session.
CRs-Fixed: 2677450
Change-Id: I4f0d3ffd7245a931c273611c9c4b7e503c038664
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Add provision in CRM link control to accept any long exposure
timeout value so that CRM can modify it's internal WD timer
during link activate.
CRs-Fixed: 2706105
Change-Id: Icedeeef32dcc5c881277f28dc2c0fbb40fa1e7f1
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Holi has different version of camnoc and CPAS version
which requires separate register space and camnoc
interface changes and CPAS version change.
This change adds the same.
CRs-Fixed: 2701462
Change-Id: I9fbfab592278ba7804809872b4b4b235895477f2
Signed-off-by: Suresh Vankadara <svankada@codeaurora.org>
Enabling format measure helps to find mismatch between
the expected sensor width and height with actual sensor width
and height. In case of metadata, width is more than 16 bit, hence
skip format measure check for it.
In case of mismatch CSID will give CSID_PATH_ERROR_PIX_COUNT
and CSID_PATH_ERROR_LINE_COUNT.
CRs-Fixed: 2634468
Change-Id: Ic57a18ee5217982d36116060371bdc99405ea759
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
IFE Query cap currently gives only IFE Full Information. Update the
code to return IFE Full, IFE lite, full IFE-CSID and IFE-CSID lite
information in return of the IFE Query cap command.
CRs-Fixed: 2647995
Change-Id: I84cf5b766ce191aacad4a1de478c6eebafe917b3
Signed-off-by: Jigar Agrawal <jigar@codeaurora.org>
Add version_3 files to support next revision
of CPHY TPG. Extended capability for Multi-VC
mode of operation. Add support to handle IRQ.
CRs-Fixed: 2663712
Change-Id: I91864af6e9415e74104a6bce266dd78d5c021dc7
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
Improve debugging infrastructure and logging for memory related
issues. There are scenarios where the fd returned after ion_alloc
exists in camera smmu table as being mapped [stale entry].
On such scenarios, this change will return a specific error code to
userspace. The change also propagates the mapped size back to
user space.
CRs-Fixed: 2663114
Change-Id: Ia797b65d1e8ded58dec5b01df07d73262c4cfa95
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
msm: camera: tfe: Fix variable initialization issues
msm: camera: isp: Dual tfe event check with proper hw idx
msm: camera: smmu: Add support for non-contiguous mermory region
msm: camera: smmu: Use iommu best match algo for camera
msm: camera: ope: Optimize allocation of IO configuration
msm: camera: ope: Fix for KW Issues
msm: camera: ope: Add support for stripe level height configuration
msm: camera: tfe: Enable the delay line clc
msm: camera: ope: Fix false alarm for OPE HW timeout
msm: camera: tfe: Support register dump per request
msm: camera: ope: Increase max number of stripes
msm: camera: ope: Change packer and unpacker format in case NV12
msm: camera: tfe: Add packet code get command for tfe
msm: camera: ope: Trigger recovery in case of violation on write bus
msm: camera: ope: Protect ope hw reset with mutex
msm: camera: ope: Add a check for valid request in cdm callback
msm: camera: ope: Remove the BW & clock vote in release context
msm: camera: ope: Reduce OPE BUS memory
msm: camera: ope: Fix return value for ope acquire
msm: camera: ope: Fix false alarm for OPE request timeout
msm: camera: ope: Avoid deadlock during recovery after HW hang
msm: camera: tfe: tfe debug enhancement
msm: camera: cdm: Fix irq_data value in case of inline irq
msm: camera: flash: Switch off flash on provider crash
msm: camera: ope: Initialize ope hw mutex structure
msm: camera: cdm: Flush all available FIFOs during reset
msm: camera: cpas: Add mandatory bw option for axi ports clocks
msm: camera: ope: Use vzalloc to allocate the write bus ctx structure
msm: camera: ope: Fix handling of init hw failure
msm: camera: tfe: Enable per frame register dump for rdi only context
msm: camera: cdm: Protect cdm core status bits with mutex
msm: camera: cdm: correct the error check in cmd submit irq
msm: camera: ope: Fix unclock access during HW reset
msm: camera: ope: Program frame level settings after idle event
msm: camera: ope: Delay releasing of resources for last context
msm: camera: isp: Increase default SOF freeze timeout
msm: camera: smmu: Add map and unmap monitor
msm: camera: isp: Add trace events across ISP
msm: camera: smmu: Profile time taken for map, unmap
msm: camera: ope: Start context timer on receiving new request
msm: camera: tfe: Reduce stack size during set axi bw
msm: camera: cdm: Check for HW state before dumping registers
msm: camera: ope: Reduce stack footprint during acquire
msm: camera: tfe: Disable clock if tfe2 is not supported
msm: camera: cdm: Avoid cdm pause incase of BL submit
msm: camera: tfe: Optimize CSID IRQ logging
msm: camera: ope: Move request id validity check outside of lock
msm: camera: tfe: Correct the tfe hw manager dump logic
msm: camera: ope: Synchronize flush and submit BLs
msm: camera: cdm: Protect cdm reset status
msm: camera: cdm: Handle cdm deinit sequence properly
msm: camera: tfe: Reduce reset timeout to 100ms
msm: camera: ope: Fix hang detection
msm: camera: ope: Make non-fatal logs as debug and info logs
msm: camera: tfe: set overflow pending bit to zero after HW reset
msm: camera: ope: Do not disable CDM during error handling
msm: camera: ope: Add support for OPE Replay
msm: camera: ope: Stop OPE in case of init failure
msm: camera: ope: Synchronize process cmd and flush request
msm: camera: cdm: Fix CDM IRQ handling
msm: camera: tfe: LDAR dump for TFE
msm: camera: ope: Fix the length check for debug buffer
msm: camera: cdm: Fix CDM reset logic
msm: camera: ope: Dump debug registers in case of HW hang
msm: camera: tfe: Support the RDI bus port for line based mode
msm: camera: cdm: Handle out of order reset done events
msm: camera: ope: Consider other contexts during timeout
msm: camera: ope: Put GenIRQ in last stripe BL
msm: camera: tfe: Process the rdi interrupts for rdi only resource
msm: camera: jpeg: Check the HW state before accessing register
msm: camera: csiphy: Update csiphy power-up sequence for lito v2
msm: camera: cdm: Secure freeing of request lists using locks
msm: camera: cpas: Add support for Scuba camnoc
msm: camera: csiphy: Clear secure phy flags on release
msm: camera: tfe: validate the tfe bw num paths
msm: camera: ope: Reorder the reset order in ope acquire
msm: camera: ope: Dump debug registers in case of reset failure
msm: camera: ope: Add logic to detect hang in CDM
msm: camera: isp: Increase max count of cfg to support more init packets
msm: camera: core: Fix cpas axi clk rate overflow.
CRs-Fixed: 2668666
Change-Id: I882ca4bd117bebc7d1c62bc82299d69d7b5c9388
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Aligns the uapi header types and includes to be in-line with upstream
kernel formatting. The errors are given by enabling the UAPI_HEADER_TEST
config, which is now enabled in GKI builds.
CRs-Fixed: 2679250
Change-Id: I195fb2aab9251043fc63d79dd31f2db53b1228f5
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
