With LTO, modules with a large number of compilation units maybe end
up exceeding the for loop argument list in the shell. Reduce the
probability for this happening by including only the modules that have
exported symbols.
Bug: 150234396
Change-Id: I4a289aff47e1444aca28d1bd00b125628f39bcd5
Suggested-by: Hsiu-Chang Chen <hsiuchangchen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Git-commit: 1245167
Git-repo: https://android.googlesource.com/kernel/common
Signed-off-by: Prakruthi Deepak Heragu <pheragu@codeaurora.org>
* refs/heads/tmp-9cdc723:
Revert "usb: dwc3: gadget: Fix logical condition"
Revert "FROMLIST: scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting"
Linux 5.4.5
r8169: add missing RX enabling for WoL on RTL8125
net: mscc: ocelot: unregister the PTP clock on deinit
ionic: keep users rss hash across lif reset
xdp: obtain the mem_id mutex before trying to remove an entry.
page_pool: do not release pool until inflight == 0.
net/mlx5e: ethtool, Fix analysis of speed setting
net/mlx5e: Fix translation of link mode into speed
net/mlx5e: Fix freeing flow with kfree() and not kvfree()
net/mlx5e: Fix SFF 8472 eeprom length
act_ct: support asymmetric conntrack
net/mlx5e: Fix TXQ indices to be sequential
net: Fixed updating of ethertype in skb_mpls_push()
hsr: fix a NULL pointer dereference in hsr_dev_xmit()
Fixed updating of ethertype in function skb_mpls_pop
gre: refetch erspan header from skb->data after pskb_may_pull()
cls_flower: Fix the behavior using port ranges with hw-offload
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup
net: ipv6: add net argument to ip6_dst_lookup_flow
net/mlx5e: Query global pause state before setting prio2buffer
tipc: fix ordering of tipc module init and exit routine
tcp: md5: fix potential overestimation of TCP option space
openvswitch: support asymmetric conntrack
net/tls: Fix return values to avoid ENOTSUPP
net: thunderx: start phy before starting autonegotiation
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
net: sched: fix dump qlen for sch_mq/sch_mqprio with NOLOCK subqueues
net: ethernet: ti: cpsw: fix extra rx interrupt
net: dsa: fix flow dissection on Tx path
net: bridge: deny dev_set_mac_address() when unregistering
mqprio: Fix out-of-bounds access in mqprio_dump
inet: protect against too small mtu values.
ANDROID: add initial ABI whitelist for android-5.4
ANDROID: abi update for 5.4.4
ANDROID: mm: Throttle rss_stat tracepoint
FROMLIST: vsprintf: Inline call to ptr_to_hashval
UPSTREAM: rss_stat: Add support to detect RSS updates of external mm
UPSTREAM: mm: emit tracepoint when RSS changes
Linux 5.4.4
EDAC/ghes: Do not warn when incrementing refcount on 0
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
workqueue: Fix missing kfree(rescuer) in destroy_workqueue()
blk-mq: make sure that line break can be printed
ext4: fix leak of quota reservations
ext4: fix a bug in ext4_wait_for_tail_page_commit
splice: only read in as much information as there is pipe buffer space
rtc: disable uie before setting time and enable after
USB: dummy-hcd: increase max number of devices to 32
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
mm/shmem.c: cast the type of unmap_start to u64
s390/kaslr: store KASLR offset for early dumps
s390/smp,vdso: fix ASCE handling
firmware: qcom: scm: Ensure 'a0' status code is treated as signed
ext4: work around deleting a file with i_nlink == 0 safely
mm: memcg/slab: wait for !root kmem_cache refcnt killing on root kmem_cache destruction
mfd: rk808: Fix RK818 ID template
mm, memfd: fix COW issue on MAP_PRIVATE and F_SEAL_FUTURE_WRITE mappings
powerpc: Fix vDSO clock_getres()
powerpc: Avoid clang warnings around setjmp and longjmp
omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251
omap: pdata-quirks: revert pandora specific gpiod additions
iio: ad7949: fix channels mixups
iio: ad7949: kill pointless "readback"-handling code
Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
scsi: qla2xxx: Fix a dma_pool_free() call
scsi: qla2xxx: Fix SRB leak on switch command timeout
reiserfs: fix extended attributes on the root directory
ext4: Fix credit estimate for final inode freeing
quota: fix livelock in dquot_writeback_dquots
seccomp: avoid overflow in implicit constant conversion
ext2: check err when partial != NULL
quota: Check that quota is not dirty before release
video/hdmi: Fix AVI bar unpack
powerpc/xive: Skip ioremap() of ESB pages for LSI interrupts
powerpc: Allow flush_icache_range to work across ranges >4GB
powerpc/xive: Prevent page fault issues in the machine crash handler
powerpc: Allow 64bit VDSO __kernel_sync_dicache to work across ranges >4GB
coresight: Serialize enabling/disabling a link device.
stm class: Lose the protocol driver when dropping its reference
ppdev: fix PPGETTIME/PPSETTIME ioctls
RDMA/core: Fix ib_dma_max_seg_size()
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init
pinctrl: samsung: Fix device node refcount leaks in init code
pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init
pinctrl: samsung: Fix device node refcount leaks in Exynos wakeup controller init
pinctrl: samsung: Add of_node_put() before return in error path
pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type()
pinctrl: rza2: Fix gpio name typos
ACPI: PM: Avoid attaching ACPI PM domain to certain devices
ACPI: EC: Rework flushing of pending work
ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()
ACPI: OSL: only free map once in osl.c
ACPI / hotplug / PCI: Allocate resources directly under the non-hotplug bridge
ACPI: LPSS: Add dmi quirk for skipping _DEP check for some device-links
ACPI: LPSS: Add LNXVIDEO -> BYT I2C1 to lpss_device_links
ACPI: LPSS: Add LNXVIDEO -> BYT I2C7 to lpss_device_links
ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI
ALSA: hda/realtek - Line-out jack doesn't work on a Dell AIO
ALSA: oxfw: fix return value in error path of isochronous resources reservation
ALSA: fireface: fix return value in error path of isochronous resources reservation
cpufreq: powernv: fix stack bloat and hard limit on number of CPUs
PM / devfreq: Lock devfreq in trans_stat_show
intel_th: pci: Add Tiger Lake CPU support
intel_th: pci: Add Ice Lake CPU support
intel_th: Fix a double put_device() in error path
powerpc/perf: Disable trace_imc pmu
drm/panfrost: Open/close the perfcnt BO
perf tests: Fix out of bounds memory access
erofs: zero out when listxattr is called with no xattr
cpuidle: use first valid target residency as poll time
cpuidle: teo: Fix "early hits" handling for disabled idle states
cpuidle: teo: Consider hits and misses metrics of disabled states
cpuidle: teo: Rename local variable in teo_select()
cpuidle: teo: Ignore disabled idle states that are too deep
cpuidle: Do not unset the driver if it is there already
media: cec.h: CEC_OP_REC_FLAG_ values were swapped
media: radio: wl1273: fix interrupt masking on release
media: bdisp: fix memleak on release
media: vimc: sen: remove unused kthread_sen field
media: hantro: Fix picture order count table enable
media: hantro: Fix motion vectors usage condition
media: hantro: Fix s_fmt for dynamic resolution changes
s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported
ar5523: check NULL before memcpy() in ar5523_cmd()
wil6210: check len before memcpy() calls
cgroup: pids: use atomic64_t for pids->limit
blk-mq: avoid sysfs buffer overflow with too many CPU cores
md: improve handling of bio with REQ_PREFLUSH in md_flush_request()
ASoC: fsl_audmix: Add spin lock to protect tdms
ASoC: Jack: Fix NULL pointer dereference in snd_soc_jack_report
ASoC: rt5645: Fixed typo for buddy jack support.
ASoC: rt5645: Fixed buddy jack support.
workqueue: Fix pwq ref leak in rescuer_thread()
workqueue: Fix spurious sanity check failures in destroy_workqueue()
dm zoned: reduce overhead of backing device checks
dm writecache: handle REQ_FUA
hwrng: omap - Fix RNG wait loop timeout
ovl: relax WARN_ON() on rename to self
ovl: fix corner case of non-unique st_dev;st_ino
ovl: fix lookup failure on multi lower squashfs
lib: raid6: fix awk build warnings
rtlwifi: rtl8192de: Fix missing enable interrupt flag
rtlwifi: rtl8192de: Fix missing callback that tests for hw release of buffer
rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer address
btrfs: record all roots for rename exchange on a subvol
Btrfs: send, skip backreference walking for extents with many references
btrfs: Remove btrfs_bio::flags member
btrfs: Avoid getting stuck during cyclic writebacks
Btrfs: fix negative subv_writers counter and data space leak after buffered write
Btrfs: fix metadata space leak on fixup worker failure to set range as delalloc
btrfs: use refcount_inc_not_zero in kill_all_nodes
btrfs: use btrfs_block_group_cache_done in update_block_group
btrfs: check page->mapping when loading free space cache
iwlwifi: pcie: fix support for transmitting SKBs with fraglist
usb: typec: fix use after free in typec_register_port()
phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role"
usb: dwc3: ep0: Clear started flag on completion
usb: dwc3: gadget: Clear started flag for non-IOC
usb: dwc3: gadget: Fix logical condition
usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
virtio-balloon: fix managed page counts when migrating pages between zones
virt_wifi: fix use-after-free in virt_wifi_newlink()
mtd: rawnand: Change calculating of position page containing BBM
mtd: spear_smi: Fix Write Burst mode
brcmfmac: disable PCIe interrupts before bus reset
EDAC/altera: Use fast register IO for S10 IRQs
tpm: Switch to platform_get_irq_optional()
tpm: add check after commands attribs tab allocation
usb: mon: Fix a deadlock in usbmon between mmap and read
usb: core: urb: fix URB structure initialization function
USB: adutux: fix interface sanity check
usb: roles: fix a potential use after free
USB: serial: io_edgeport: fix epic endpoint lookup
USB: idmouse: fix interface sanity checks
USB: atm: ueagle-atm: add missing endpoint check
iio: adc: ad7124: Enable internal reference
iio: adc: ad7606: fix reading unnecessary data from device
iio: imu: inv_mpu6050: fix temperature reporting using bad unit
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
iio: adis16480: Fix scales factors
iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw
iio: adis16480: Add debugfs_reg_access entry
ARM: dts: pandora-common: define wl1251 as child node of mmc3
usb: common: usb-conn-gpio: Don't log an error on probe deferral
interconnect: qcom: qcs404: Walk the list safely on node removal
interconnect: qcom: sdm845: Walk the list safely on node removal
xhci: make sure interrupts are restored to correct state
xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
xhci: Increase STS_HALT timeout in xhci_suspend()
xhci: fix USB3 device initiated resume race with roothub autosuspend
xhci: Fix memory leak in xhci_add_in_port()
usb: xhci: only set D3hot for pci device
staging: gigaset: add endpoint-type sanity check
staging: gigaset: fix illegal free on probe errors
staging: gigaset: fix general protection fault on probe
staging: vchiq: call unregister_chrdev_region() when driver registration fails
staging: rtl8712: fix interface sanity check
staging: rtl8188eu: fix interface sanity check
staging: exfat: fix multiple definition error of `rename_file'
binder: fix incorrect calculation for num_valid
usb: host: xhci-tegra: Correct phy enable sequence
usb: Allow USB device to be warm reset in suspended state
USB: documentation: flags on usb-storage versus UAS
USB: uas: heed CAPACITY_HEURISTICS
USB: uas: honor flag to avoid CAPACITY16
media: venus: remove invalid compat_ioctl32 handler
ceph: fix compat_ioctl for ceph_dir_operations
compat_ioctl: add compat_ptr_ioctl()
scsi: qla2xxx: Fix memory leak when sending I/O fails
scsi: qla2xxx: Fix double scsi_done for abort path
scsi: qla2xxx: Fix driver unload hang
scsi: qla2xxx: Do command completion on abort timeout
scsi: zfcp: trace channel log even for FCP command responses
scsi: lpfc: Fix bad ndlp ptr in xri aborted handling
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
nvme: Namepace identification descriptor list is optional
usb: gadget: pch_udc: fix use after free
usb: gadget: configfs: Fix missing spin_lock_init()
BACKPORT: FROMLIST: scsi: ufs: Export query request interfaces
ANDROID: update abi with unbindable_ports sysctl
BACKPORT: FROMLIST: net: introduce ip_local_unbindable_ports sysctl
ANDROID: update abi for 5.4.3 merge
ANDROID: update abi_gki_aarch64.xml for ion, drm changes
ANDROID: drivers: gpu: drm: export drm_mode_convert_umode symbol
ANDROID: ion: flush cache before exporting non-cached buffers
Linux 5.4.3
kselftest: Fix NULL INSTALL_PATH for TARGETS runlist
perf script: Fix invalid LBR/binary mismatch error
EDAC/ghes: Fix locking and memory barrier issues
watchdog: aspeed: Fix clock behaviour for ast2600
drm/mcde: Fix an error handling path in 'mcde_probe()'
md/raid0: Fix an error message in raid0_make_request()
cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value
ALSA: hda - Fix pending unsol events at shutdown
KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332)
binder: Handle start==NULL in binder_update_page_range()
binder: Prevent repeated use of ->mmap() via NULL mapping
binder: Fix race between mmap() and binder_alloc_print_pages()
Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
vcs: prevent write access to vcsu devices
thermal: Fix deadlock in thermal thermal_zone_device_check
iomap: Fix pipe page leakage during splicing
bdev: Refresh bdev size for disks without partitioning
bdev: Factor out bdev revalidation into a common helper
rfkill: allocate static minor
RDMA/qib: Validate ->show()/store() callbacks before calling them
can: ucan: fix non-atomic allocation in completion handler
spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS
spi: Fix SPI_CS_HIGH setting when using native and GPIO CS
spi: atmel: Fix CS high support
spi: stm32-qspi: Fix kernel oops when unbinding driver
spi: spi-fsl-qspi: Clear TDH bits in FLSHCR register
crypto: user - fix memory leak in crypto_reportstat
crypto: user - fix memory leak in crypto_report
crypto: ecdh - fix big endian bug in ECC library
crypto: ccp - fix uninitialized list head
crypto: geode-aes - switch to skcipher for cbc(aes) fallback
crypto: af_alg - cast ki_complete ternary op to int
crypto: atmel-aes - Fix IV handling when req->nbytes < ivsize
crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr
KVM: x86: Grab KVM's srcu lock when setting nested state
KVM: x86: Remove a spurious export of a static function
KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
KVM: x86: do not modify masked bits of shared MSRs
KVM: arm/arm64: vgic: Don't rely on the wrong pending table
KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter
KVM: PPC: Book3S HV: XIVE: Set kvm->arch.xive when VPs are allocated
KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path
KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one
arm64: dts: exynos: Revert "Remove unneeded address space mapping for soc node"
arm64: Validate tagged addresses in access_ok() called from kernel threads
drm/i810: Prevent underflow in ioctl
drm: damage_helper: Fix race checking plane->state->fb
drm/msm: fix memleak on release
jbd2: Fix possible overflow in jbd2_log_space_left()
kernfs: fix ino wrap-around detection
nfsd: restore NFSv3 ACL support
nfsd: Ensure CLONE persists data and metadata changes to the target file
can: slcan: Fix use-after-free Read in slcan_open
tty: vt: keyboard: reject invalid keycodes
CIFS: Fix SMB2 oplock break processing
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect
x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()
media: rc: mark input device as pointing stick
Input: Fix memory leak in psxpad_spi_probe
coresight: etm4x: Fix input validation for sysfs.
Input: goodix - add upside-down quirk for Teclast X89 tablet
Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus
soc: mediatek: cmdq: fixup wrong input order of write api
ALSA: hda: Modify stream stripe mask only when needed
ALSA: hda - Add mute led support for HP ProBook 645 G4
ALSA: pcm: oss: Avoid potential buffer overflows
ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G
ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC
SUNRPC: Avoid RPC delays when exiting suspend
io_uring: ensure req->submit is copied when req is deferred
io_uring: fix missing kmap() declaration on powerpc
fuse: verify attributes
fuse: verify write return
fuse: verify nlink
fuse: fix leak of fuse_io_priv
io_uring: transform send/recvmsg() -ERESTARTSYS to -EINTR
io_uring: fix dead-hung for non-iter fixed rw
mwifiex: Re-work support for SDIO HW reset
serial: ifx6x60: add missed pm_runtime_disable
serial: 8250_dw: Avoid double error messaging when IRQ absent
serial: stm32: fix clearing interrupt error flags
serial: serial_core: Perform NULL checks for break_ctl ops
serial: pl011: Fix DMA ->flush_buffer()
tty: serial: msm_serial: Fix flow control
tty: serial: fsl_lpuart: use the sg count from dma_map_sg
serial: 8250-mtk: Use platform_get_irq_optional() for optional irq
usb: gadget: u_serial: add missing port entry locking
staging/octeon: Use stubs for MIPS && !CAVIUM_OCTEON_SOC
mailbox: tegra: Fix superfluous IRQ error message
time: Zero the upper 32-bits in __kernel_timespec on 32-bit
lp: fix sparc64 LPSETTIMEOUT ioctl
sparc64: implement ioremap_uc
perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite
arm64: tegra: Fix 'active-low' warning for Jetson Xavier regulator
arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator
rsi: release skb if rsi_prepare_beacon fails
FROMLIST: scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
FROMLIST: scsi: ufs: Add dev ref clock gating wait time support
FROMLIST: scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
FROMLIST: scsi: ufs: Remove the check before call setup clock notify vops
FROMLIST: scsi: ufs: set load before setting voltage in regulators
FROMLIST: scsi: ufs: Flush exception event before suspend
FROMLIST: scsi: ufs: Do not rely on prefetched data
FROMLIST: scsi: ufs: Fix up clock scaling
FROMGIT: scsi: ufs: Do not free irq in suspend
FROMGIT: scsi: ufs: Do not clear the DL layer timers
FROMGIT: scsi: ufs: Release clock if DMA map fails
FROMGIT: scsi: ufs: Use DBD setting in mode sense
FROMGIT: scsi: core: Adjust DBD setting in MODE SENSE for caching mode page per LLD
FROMGIT: scsi: ufs: Complete pending requests in host reset and restore path
FROMGIT: scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
FROMGIT: scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
FROMGIT: scsi: ufs: Recheck bkops level if bkops is disabled
ANDROID: update abi_gki_aarch64.xml for LTO, CFI, and SCS
ANDROID: gki_defconfig: enable LTO, CFI, and SCS
ANDROID: update abi_gki_aarch64.xml for CONFIG_GNSS
ANDROID: cuttlefish_defconfig: Enable CONFIG_GNSS
ANDROID: gki_defconfig: enable HID configs
UPSTREAM: arm64: Validate tagged addresses in access_ok() called from kernel threads
ANDROID: kbuild: limit LTO inlining
ANDROID: kbuild: merge module sections with LTO
ANDROID: f2fs: fix possible merge of unencrypted with encrypted I/O
ANDROID: gki_defconfig: Enable UCLAMP by default
ANDROID: make sure proc mount options are applied
ANDROID: sound: usb: Add helper APIs to enable audio stream
ANDROID: Update ABI representation
ANDROID: Don't base allmodconfig on gki_defconfig
ANDROID: Disable UNWINDER_ORC for allmodconfig
ANDROID: ASoC: Fix 'allmodconfig' build break
Linux 5.4.2
platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
HID: core: check whether Usage Page item is after Usage ID items
crypto: talitos - Fix build error by selecting LIB_DES
Revert "jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()"
ext4: add more paranoia checking in ext4_expand_extra_isize handling
r8169: fix resume on cable plug-in
r8169: fix jumbo configuration for RTL8168evl
selftests: pmtu: use -oneline for ip route list cache
tipc: fix link name length check
selftests: bpf: correct perror strings
selftests: bpf: test_sockmap: handle file creation failures gracefully
net/tls: use sg_next() to walk sg entries
net/tls: remove the dead inplace_crypto code
selftests/tls: add a test for fragmented messages
net: skmsg: fix TLS 1.3 crash with full sk_msg
net/tls: free the record on encryption error
net/tls: take into account that bpf_exec_tx_verdict() may free the record
openvswitch: remove another BUG_ON()
openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()
sctp: cache netns in sctp_ep_common
slip: Fix use-after-free Read in slip_open
sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcook
openvswitch: fix flow command message size
net: sched: fix `tc -s class show` no bstats on class with nolock subqueues
net: psample: fix skb_over_panic
net: macb: add missed tasklet_kill
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
mdio_bus: don't use managed reset-controller
macvlan: schedule bc_work even if error
gve: Fix the queue page list allocated pages count
x86/fpu: Don't cache access to fpu_fpregs_owner_ctx
thunderbolt: Power cycle the router if NVM authentication fails
mei: me: add comet point V device id
mei: bus: prefix device names on bus with the bus name
USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9P
staging: rtl8723bs: Add 024c:0525 to the list of SDIO device-ids
staging: rtl8723bs: Drop ACPI device ids
staging: rtl8192e: fix potential use after free
staging: wilc1000: fix illegal memory access in wilc_parse_join_bss_param()
usb: dwc2: use a longer core rest timeout in dwc2_core_reset()
driver core: platform: use the correct callback type for bus_find_device
crypto: inside-secure - Fix stability issue with Macchiatobin
net: disallow ancillary data for __sys_{send,recv}msg_file()
net: separate out the msghdr copy from ___sys_{send,recv}msg()
io_uring: async workers should inherit the user creds
ANDROID: Update ABI representation
UPSTREAM: of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
UPSTREAM: of: property: Fix the semantics of of_is_ancestor_of()
UPSTREAM: i2c: of: Populate fwnode in of_i2c_get_board_info()
UPSTREAM: regulator: core: Don't try to remove device links if add failed
UPSTREAM: driver core: Clarify documentation for fwnode_operations.add_links()
ANDROID: Update ABI representation
ANDROID: gki_defconfig: IIO=y
ANDROID: Update ABI representation
ANDROID: ASoC: core - add hostless DAI support
ANDROID: gki_defconfig: =m's applied for virtio configs in arm64
ANDROID: Update ABI representation after 5.4.1 merge
Linux 5.4.1
KVM: PPC: Book3S HV: Flush link stack on guest exit to host kernel
powerpc/book3s64: Fix link stack flush on context switch
staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
USB: serial: option: add support for Foxconn T77W968 LTE modules
USB: serial: option: add support for DW5821e with eSIM support
USB: serial: mos7840: fix remote wakeup
USB: serial: mos7720: fix remote wakeup
USB: serial: mos7840: add USB ID to support Moxa UPort 2210
appledisplay: fix error handling in the scheduled work
USB: chaoskey: fix error case of a timeout
usb-serial: cp201x: support Mark-10 digital force gauge
usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd_submit()
usbip: tools: fix fd leakage in the function of read_attr_usbip_status
USBIP: add config dependency for SGL_ALLOC
ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs
media: mceusb: fix out of bounds read in MCE receiver buffer
media: imon: invalid dereference in imon_touch_event
media: cxusb: detect cxusb_ctrl_msg error in query
media: b2c2-flexcop-usb: add sanity checking
media: uvcvideo: Fix error path in control parsing failure
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
futex: Move futex exit handling into futex code
cpufreq: Add NULL checks to show() and store() methods of cpufreq
media: usbvision: Fix races among open, close, and disconnect
media: usbvision: Fix invalid accesses after device disconnect
media: vivid: Fix wrong locking that causes race conditions on streaming stop
media: vivid: Set vid_cap_streaming and vid_out_streaming to true
ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data
ALSA: usb-audio: Fix NULL dereference at parsing BADD
futex: Prevent robust futex exit race
x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3
x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise
selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel
selftests/x86/mov_ss_trap: Fix the SYSENTER test
x86/entry/32: Fix NMI vs ESPFIX
x86/entry/32: Unwind the ESPFIX stack earlier on exception entry
x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL
x86/entry/32: Use %ss segment where required
x86/entry/32: Fix IRET exception
x86/cpu_entry_area: Add guard page for entry stack on 32bit
x86/pti/32: Size initial_page_table correctly
x86/doublefault/32: Fix stack canaries in the double fault handler
x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
x86/stackframe/32: Repair 32-bit Xen PV
nbd: prevent memory leak
x86/speculation: Fix redundant MDS mitigation message
x86/speculation: Fix incorrect MDS/TAA mitigation status
x86/insn: Fix awk regexp warnings
md/raid10: prevent access of uninitialized resync_pages offset
Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
Revert "Bluetooth: hci_ll: set operational frequency earlier"
ath10k: restore QCA9880-AR1A (v1) detection
ath10k: Fix HOST capability QMI incompatibility
ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipe
ath9k_hw: fix uninitialized variable data
Bluetooth: Fix invalid-free in bcsp_close()
ANDROID: gki_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
FROMLIST: crypto: arm64/sha: fix function types
ANDROID: arm64: kvm: disable CFI
ANDROID: arm64: add __nocfi to __apply_alternatives
ANDROID: arm64: add __pa_function
ANDROID: arm64: add __nocfi to functions that jump to a physical address
ANDROID: arm64: bpf: implement arch_bpf_jit_check_func
ANDROID: bpf: validate bpf_func when BPF_JIT is enabled with CFI
ANDROID: add support for Clang's Control Flow Integrity (CFI)
ANDROID: arm64: allow LTO_CLANG and THINLTO to be selected
FROMLIST: arm64: fix alternatives with LLVM's integrated assembler
FROMLIST: arm64: lse: fix LSE atomics with LLVM's integrated assembler
ANDROID: arm64: disable HAVE_ARCH_PREL32_RELOCATIONS with LTO_CLANG
ANDROID: arm64: vdso: disable LTO
ANDROID: irqchip/gic-v3: rename gic_of_init to work around a ThinLTO+CFI bug
ANDROID: soc/tegra: disable ARCH_TEGRA_210_SOC with LTO
ANDROID: init: ensure initcall ordering with LTO
ANDROID: drivers/misc/lkdtm: disable LTO for rodata.o
ANDROID: efi/libstub: disable LTO
ANDROID: scripts/mod: disable LTO for empty.c
ANDROID: kbuild: fix dynamic ftrace with clang LTO
ANDROID: kbuild: add support for Clang LTO
ANDROID: kbuild: add CONFIG_LD_IS_LLD
FROMGIT: driver core: platform: use the correct callback type for bus_find_device
FROMLIST: arm64: implement Shadow Call Stack
FROMLIST: arm64: disable SCS for hypervisor code
FROMLIST: arm64: vdso: disable Shadow Call Stack
FROMLIST: arm64: efi: restore x18 if it was corrupted
FROMLIST: arm64: preserve x18 when CPU is suspended
FROMLIST: arm64: reserve x18 from general allocation with SCS
FROMLIST: arm64: disable function graph tracing with SCS
FROMLIST: scs: add support for stack usage debugging
FROMLIST: scs: add accounting
FROMLIST: add support for Clang's Shadow Call Stack (SCS)
FROMLIST: arm64: kernel: avoid x18 in __cpu_soft_restart
FROMLIST: arm64: kvm: stop treating register x18 as caller save
FROMLIST: arm64/lib: copy_page: avoid x18 register in assembler code
FROMLIST: arm64: mm: avoid x18 in idmap_kpti_install_ng_mappings
ANDROID: clang: update to 10.0.1
ANDROID: update ABI representation
Conflicts:
Documentation/devicetree/bindings
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
arch/arm64/Kconfig
drivers/firmware/qcom_scm-64.c
drivers/hwtracing/coresight/coresight.c
drivers/scsi/ufs/ufs.h
drivers/scsi/ufs/ufshcd.c
drivers/scsi/ufs/ufshcd.h
drivers/scsi/ufs/unipro.h
drivers/staging/android/ion/heaps/ion_cma_heap.c
drivers/staging/android/ion/heaps/ion_system_heap.c
drivers/usb/dwc3/ep0.c
drivers/usb/dwc3/gadget.c
include/sound/pcm.h
include/sound/soc.h
kernel/exit.c
kernel/sched/core.c
Change-Id: I66ea973ddcafd352ba999a1dc98e04df33397e3b
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Add support to compile device tree overlay blob.
'dtbo-y' target can be used to specify DT overlay blob.
'<target>-obj' must be specified to list base and overlay blobs.
Change-Id: Ib5036c70ba46374619cc43f9f7b697e1a444aebf
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
[eberman@codeaurora.org: Resolve merge conflicts]
Signed-off-by: Elliot Bermna <eberman@codeaurora.org>
With CONFIG_LTO_CLANG enabled, LLVM IR won't be compiled into object
files until modpost_link. This change postpones calls to recordmcount
until after this step.
In order to exclude ftrace_process_locs from inspection, we add a new
code section .text..ftrace, which we tell recordmcount to ignore, and
a __norecordmcount attribute for moving functions to this section.
Bug: 145210207
Change-Id: Ib77f7c431fce54243c46d584b55761ed2342965c
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This change adds the configuration option CONFIG_LTO_CLANG, and
build system support for Clang's Link Time Optimization (LTO). In
preparation for LTO support with other compilers, potentially common
parts of the changes are gated behind CONFIG_LTO instead.
With -flto, instead of object files, Clang produces LLVM bitcode,
which is compiled into a native object at link time, allowing the
final binary to be optimized globally. For more details, see:
https://llvm.org/docs/LinkTimeOptimization.html
While the kernel normally uses GNU ld for linking, LLVM supports LTO
only with LLD or GNU gold linkers. This change assumes LLD is used.
Bug: 145210207
Change-Id: If1164ff33d073358ee7d4bba84cbb06c349c4a88
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Commit 40df759e2b ("kbuild: Fix build with binutils <= 2.19")
introduced ar-option and KBUILD_ARFLAGS to deal with old binutils.
According to Documentation/process/changes.rst, the current minimal
supported version of binutils is 2.21 so you can assume the 'D' option
is always supported. Not only GNU ar but also llvm-ar supports it.
With the 'D' option hard-coded, there is no more user of ar-option
or KBUILD_ARFLAGS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
KBUILD_ENABLE_EXTRA_GCC_CHECKS started as a switch to add extra warning
options for GCC, but now it is a historical misnomer since we use it
also for Clang, DTC, and even kernel-doc.
Rename it to more sensible, shorter KBUILD_EXTRA_WARN.
For the backward compatibility, KBUILD_ENABLE_EXTRA_GCC_CHECKS is still
supported (but not advertised in the documentation).
I also fixed up 'make help', and updated the documentation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Makefile.lib is included by Makefile.modfinal as well as Makefile.build.
Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c
in Makefile.modfinal. Move modkern_cflags as well for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Currently, the single target build directly descends into the directory
of the target. For example,
$ make foo/bar/baz.o
... directly descends into foo/bar/.
On the other hand, the normal build usually descends one directory at
a time, i.e. descends into foo/, and then foo/bar/.
This difference causes some problems.
[1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles
The options in subdir-{as,cc}flags-y take effect in the current
and its sub-directories. In other words, they are inherited
downward. In the example above, the single target will miss
subdir-{as,cc}flags-y if they are defined in foo/Makefile.
[2] could be built in a different directory
As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can
handle files that are spread over several sub-directories.
The build rule of foo/bar/baz.o may not necessarily be specified in
foo/bar/Makefile. It might be specifies in foo/Makefile as follows:
[foo/Makefile]
obj-y := bar/baz.o
This often happens when a module is so big that its source files
are divided into sub-directories.
In this case, there is no Makefile in the foo/bar/ directory, yet
the single target descends into foo/bar/, then fails due to the
missing Makefile. You can still do 'make foo/bar/' for partial
building, but cannot do 'make foo/bar/baz.s'. I believe the single
target '%.s' is a useful feature for inspecting the compiler output.
Some modules work around this issue by putting an empty Makefile
in every sub-directory.
This commit fixes those problems by making the single target build
descend in the same way as the normal build does.
Another change is the single target build will observe the CONFIG
options. Previously, it allowed users to build the foo.o even when
the corresponding CONFIG_FOO is disabled:
obj-$(CONFIG_FOO) += foo.o
In the new behavior, the single target build will just fail and show
"No rule to make target ..." (or "Nothing to be done for ..." if the
stale object already exists, but cannot be updated).
The disadvantage of this commit is the build speed. Now that the
single target build visits every directory and parses lots of
Makefiles, it is slower than before. (But, I hope it will not be
too slow.)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For the single target building %.symtypes from %.S, $(a_flags) is
expanded into the _KERNEL flags even if the object is a part of a
module.
$(real-obj-m:.o=.symtypes): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
... would fix the issue, but it is not nice to duplicate similar code
for every suffix.
Implement modkern_aflags in the same way as modkern_cflags.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
$(basename ...) trims the last suffix. Using it is more intuitive in
my opinion.
This pattern rule makes %.asn1.c and %.asn1.h at the same time.
Previously, the short log showed only either of them, depending on
the target file in question.
To clarify that two files are being generated by the single recipe,
I changed the log as follows:
Before:
ASN.1 crypto/asymmetric_keys/x509.asn1.c
After:
ASN.1 crypto/asymmetric_keys/x509.asn1.[ch]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit ff9b45c55b ("kbuild: modpost: read modules.order instead
of $(MODVERDIR)/*.mod"), a module is no longer built in the following
pattern:
[Makefile]
subdir-y := some-module
[some-module/Makefile]
obj-m := some-module.o
You cannot write Makefile this way in upstream because modules.order is
not correctly generated. subdir-y is used to descend to a sub-directory
that builds tools, device trees, etc.
For external modules, the modules order does not matter. So, the
Makefile above was known to work.
I believe the Makefile should be re-written as follows:
[Makefile]
obj-m := some-module/
[some-module/Makefile]
obj-m := some-module.o
However, people will have no idea if their Makefile suddenly stops
working. In fact, I received questions from multiple people.
Show a warning for a while if obj-m is specified in a Makefile visited
by subdir-y or subdir-m.
I touched the %/ rule to avoid false-positive warnings for the single
target.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Tom Stonecypher <thomas.edwardx.stonecypher@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
The modules.order files in directories visited by the chain of obj-y
or obj-m are merged to the upper-level ones, and become parts of the
top-level modules.order. On the other hand, there is no need to
generate modules.order in directories visited by subdir-y or subdir-m
since they would become orphan anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current implementation of need-builtin is false-positive,
for example, in the following Makefile:
obj-m := foo/
obj-y := foo/bar/
..., where foo/built-in.a is not required.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, *.mod is created as a side-effect of obj-m.
Split out *.mod as a dedicated build rule, which allows to unify
the %.c -> %.o rule, and remove the single-used-m rule.
This also makes the incremental build of allmodconfig faster because
it saves $(NM) invocation when there is no change in the module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current format of *.mod is like this:
line 1: directory path to the .ko file
line 2: a list of objects linked into this module
line 3: unresolved symbols (only when CONFIG_TRIM_UNUSED_KSYMS=y)
Now that *.mod and *.ko are created in the same directory, the line 1
provides no valuable information. It can be derived by replacing the
extension .mod with .ko. In fact, nobody uses the first line any more.
Cut down the first line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Currently, only the top-level modules.order drops duplicated entries.
The modules.order files in sub-directories potentially contain
duplication. To list out the paths of all modules, I want to use
modules.order instead of parsing *.mod files in $(MODVERDIR).
To achieve this, I want to rip off duplication from modules.order
of external modules too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Removing the 'kernel/' prefix will make our life easier because we can
simply do 'cat modules.order' to get all built modules with full paths.
Currently, we parse the first line of '*.mod' files in $(MODVERDIR).
Since we have duplicated functionality here, I plan to remove MODVERDIR
entirely.
In fact, modules.order is generated also for external modules in a
broken format. It adds the 'kernel/' prefix to the absolute path of
the module, like this:
kernel//path/to/your/external/module/foo.ko
This is fine for now since modules.order is not used for external
modules. However, I want to sanitize the format everywhere towards
the goal of removing MODVERDIR.
We cannot change the format of installed module.{order,builtin}.
So, 'make modules_install' will add the 'kernel/' prefix while copying
them to $(MODLIB)/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, $(objtree)/modules.order is touched in two places.
In the 'prepare0' rule, scripts/Makefile.build creates an empty
modules.order while processing 'obj=.'
In the 'modules' rule, the top-level Makefile overwrites it with
the correct list of modules.
While this might be a good side-effect that modules.order is made
empty every time (probably this is not intended functionality),
I personally do not like this behavior.
Create modules.order only when it is sensible to do so.
This avoids creating the following pointless files:
scripts/basic/modules.order
scripts/dtc/modules.order
scripts/gcc-plugins/modules.order
scripts/genksyms/modules.order
scripts/mod/modules.order
scripts/modules.order
scripts/selinux/genheaders/modules.order
scripts/selinux/mdp/modules.order
scripts/selinux/modules.order
Going forward, $(objtree)/modules.order lists the modules that
was built in the last successful build.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It will be useful to control the header-test by a tristate option.
If CONFIG_FOO is a tristate option, you can write like this:
header-test-$(CONFIG_FOO) += foo.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
header-test-y does not work with headers in sub-directories.
For example, you may want to write a Makefile, like this:
include/linux/Kbuild:
header-test-y += mtd/nand.h
This entry will create a wrapper include/linux/mtd/nand.hdrtest.c
with the following content:
#include "mtd/nand.h"
To make this work, we need to add $(srctree)/include/linux to the
header search path. It would be tedious to add ccflags-y.
Instead, we could change the *.hdrtest.c rule to wrap:
#include "nand.h"
This works for in-tree build since #include "..." searches in the
relative path from the header with this directive. For O=... build,
we need to add $(srctree)/include/linux/mtd to the header search path,
which will be even more tedious.
After all, I thought it would be handier to compile headers directly
without creating wrappers.
I added a new build rule to compile %.h into %.h.s
The target is %.h.s instead of %.h.o because it is slightly faster.
Also, as for GCC, an empty assembly is smaller than an empty object.
I wrote the build rule:
$(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<
instead of:
$(CC) $(c_flags) -S -o $@ -x c $<
Both work fine with GCC, but the latter is bad for Clang.
This comes down to the difference in the -Wunused-function policy.
GCC does not warn about unused 'static inline' functions at all.
Clang does not warn about the ones in included headers, but does
about the ones in the source. So, we should handle headers as
headers, not as source files.
In fact, this has been hidden since commit abb2ea7dfd ("compiler,
clang: suppress warning for unused static inline functions"), but we
should not rely on that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Sometimes it's useful to be able to explicitly ensure certain headers
remain self-contained, i.e. that they are compilable as standalone
units, by including and/or forward declaring everything they depend on.
Add special target header-test-y where individual Makefiles can add
headers to be tested if CONFIG_HEADER_TEST is enabled. This will
generate a dummy C file per header that gets built as part of extra-y.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zj9w
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
.gitignore: add more all*.config patterns
moduleparam: Save information about built-in modules in separate file
Remove MODULE_ALIAS() calls that take undefined macro
.gitignore: add leading and trailing slashes to generated directories
scripts/tags.sh: fix direct execution of scripts/tags.sh
scripts: override locale from environment when running recordmcount.pl
samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
kbuild: move Documentation to vmlinux-alldirs
kbuild: move samples/ to KBUILD_VMLINUX_OBJS
modpost: make KBUILD_MODPOST_WARN also configurable for external modules
kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
kbuild: remove unneeded dependency for include/config/kernel.release
memory: squash drivers/memory/Makefile.asm-offsets
kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
kbuild: mkmakefile: generate a simple wrapper of top Makefile
kbuild: mkmakefile: do not check the generated Makefile marker
kbuild: allow Kbuild to start from any directory
kbuild: pass $(MAKECMDGOALS) to sub-make as is
kbuild: fix warning "overriding recipe for target 'Makefile'"
...
It is important that UACCESS regions are as small as possible;
furthermore the UACCESS state is not scheduled, so doing anything that
might directly call into the scheduler will cause random code to be
ran with UACCESS enabled.
Teach objtool too track UACCESS state and warn about any CALL made
while UACCESS is enabled. This very much includes the __fentry__()
and __preempt_schedule() calls.
Note that exceptions _do_ save/restore the UACCESS state, and therefore
they can drive preemption. This also means that all exception handlers
must have an otherwise redundant UACCESS disable instruction;
therefore ignore this warning for !STT_FUNC code (exception handlers
are not normal functions).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
KBUILD_SRC was conventionally used for some different purposes:
[1] To remember the source tree path
[2] As a flag to check if sub-make is already done
[3] As a flag to check if Kbuild runs out of tree
For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
[2] has been replaced with self-commenting 'sub_make_done'.
For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'
This commit converts [3] to prepare for the KBUILD_SRC removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CC_FLAGS_FTRACE may contain trailing whitespace that interferes with
findstring.
For example, commit 6977f95e63 ("powerpc: avoid -mno-sched-epilog on
GCC 4.9 and newer") introduced a change such that on my ppc64le box,
CC_FLAGS_FTRACE="-pg -mprofile-kernel ". (Note the trailing space.)
When cmd_record_mcount is now invoked, findstring fails as the ftrace
flags were found at very end of _c_flags, without the trailing space.
_c_flags=" ... -pg -mprofile-kernel"
CC_FLAGS_FTRACE="-pg -mprofile-kernel "
^
findstring is looking for this extra space
Remove the redundant whitespaces from CC_FLAGS_FTRACE in
cmd_record_mcount to avoid this problem.
[masahiro.yamada: This issue only happens in the released versions
of GNU Make. CC_FLAGS_FTRACE will not contain the trailing space if
you use the latest GNU Make, which contains commit b90fabc8d6f3
("* NEWS: Do not insert a space during '+=' if the value is empty.") ]
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> (refactoring)
Fixes: 6977f95e63 ("powerpc: avoid -mno-sched-epilog on GCC 4.9 and newer").
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
scripts/Makefile.build and arch/s390/boot/Makefile use the same
command (thin archiving with symbol table creation).
Avoid the code duplication, and move it to scripts/Makefile.lib.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The genksyms source was integrated into the kernel tree in 2003.
I do not expect anybody still using the external /sbin/genksyms.
Kbuild does not need to provide the ability to override GENKSYMS.
Let's remove the GENKSYMS variable, and use the hardcoded path.
Since it occurred in the pre-git era, I attached the commit message
in case somebody is interested in the historical background.
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Wed Feb 19 04:17:28 2003 -0600
|
| kbuild: [PATCH] put genksyms in scripts dir
|
| This puts genksyms into scripts/genksyms/.
|
| genksyms used to be maintained externally, though the only possible user
| was the kernel build. Moving it into the kernel sources makes it easier to
| keep it uptodate, like for example updating it to generate linker scripts
| directly instead of postprocessing the generated header file fragments
| with sed, as we do currently.
|
| Also, genksyms does not handle __typeof__, which needs to be fixed since
| some of the exported symbol in the kernel are defined using __typeof__.
|
| (Rusty Russell/me)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The commands surrounded by ( ) are executed in a subshell, but in
most cases, we do not need to spawn an extra subshell.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
The symbol table in the final archive is unneeded; the linker does not
require the symbol table after the --whole-archive option. Every object
file in the archive is included in the link anyway.
Pass thin archives from subdirectories directly to the linker, and
remove the final archiving step.
Fix up the document and comments as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
part-of-module and quiet_modtag are set for the same targets.
Define quiet_modtag based on part-of-module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
All objects in $(obj-m) are contained in $(real-obj-m) as well.
It is true composite objects are only contained in $(obj-m),
but [M] is hard-coded in quiet_cmd_link_multi-m.
This line is redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In commit 54a702f705 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers"), I missed one important feature of the
.SECONDARY target:
.SECONDARY with no prerequisites causes all targets to be
treated as secondary.
... which agrees with the policy of Kbuild.
Let's move it to scripts/Kbuild.include, with no prerequisites.
Note:
If an intermediate file is generated by $(call if_changed,...), you
still need to add it to "targets" so its .*.cmd file is included.
The arm/arm64 crypto files are generated by $(call cmd,shipped),
so they do not need to be added to "targets", but need to be added
to "clean-files" so "make clean" can properly clean them away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These three cmd_* are invoked in the $(call cmd,*) form.
Now that 'set -e' moved to the 'cmd' macro, they do not need to
explicitly give 'set -e'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the change of rule_cc_o_c / rule_as_o_S in the last commit, each
command is executed in a separate subshell. Rip off unneeded semicolons.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'define' ... 'endef' directive is useful to confine a series of
shell commands into a single macro:
define foo
[action1]
[action2]
[action3]
endif
Each action is executed in a separate subshell.
However, rule_cc_o_c and rule_as_o_S in scripts/Makefile.build are
written as follows (with a trailing semicolon in each cmd_*):
define rule_cc_o_c
[action1] ; \
[action2] ; \
[action3] ;
endef
All shell commands are concatenated with '; \' so that it looks like
a single command from the Makefile point of view. This does not
exploit the benefits of 'define' ... 'endef' form because a single
shell command can be more simply written, like this:
rule_cc_o_c = \
[action1] ; \
[action2] ; \
[action3] ;
I guess the intention for the command concatenation was to let the
'@set -e' in if_changed_rule cover all the commands.
We can improve the readability by moving '@set -e' to the 'cmd' macro.
The combo of $(call echo-cmd,*) $(cmd_*) in rule_cc_o_c and rule_as_o_S
have been replaced with $(call cmd,*). The trailing back-slashes have
been removed.
Here is a note about the performance: the commands in rule_cc_o_c and
rule_as_o_S were previously executed all together in a single subshell,
but now each line in a separate subshell. This means Make will spawn
extra subshells [1]. I measured the build performance for
x86_64_defconfig + CONFIG_MODVERSIONS + CONFIG_TRIM_UNUSED_KSYMS
and I saw slight performance regression, but I believe code readability
and maintainability wins.
[1] Precisely, GNU Make may optimize this by executing the command
directly instead of forking a subshell, if no shell special
characters are found in the command line and omitting the subshell
will not change the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
My main motivation of this commit is to clean up scripts/Kbuild.include
and scripts/Makefile.build.
Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick;
possibly exported symbols are detected by letting $(CPP) replace
EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is
post-processed by sed, and passed to fixdep. The extra preprocessing
is costly, and hacking cmd_and_fixdep is ugly.
I came up with a new way to find exported symbols; insert a dummy
symbol __ksym_marker_* to each potentially exported symbol. Those
dummy symbols are picked up by $(NM), post-processed by sed, then
appended to .*.cmd files. I collected the post-process part to a
new shell script scripts/gen_ksymdeps.sh for readability. The dummy
symbols are put into the .discard.* section so that the linker
script rips them off the final vmlinux or modules.
A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will
be much faster.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Let $(CC) compile objects into normal files *.o instead of .tmp_*.o
whether CONFIG_MODVERSIONS is enabled or not. With this, the input
file for objtool is always *.o so objtool_o can go away.
I guess the reason of using .tmp_*.o for intermediate objects was
to avoid leaving incomplete *.o file (, whose timestamp says it is
up-to-date) when the genksyms tool failed for some reasons.
It no longer matters because any targets are deleted on errors since
commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special target").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, fixdep writes dependencies to .*.tmp, which is renamed to
.*.cmd after everything succeeds. This is a very safe way to avoid
corrupted .*.cmd files. The if_changed_dep has carried this safety
mechanism since it was added in 2002.
If fixdep fails for some reasons or a user terminates the build while
fixdep is running, the incomplete output from the fixdep could be
troublesome.
This is my insight about some bad scenarios:
[1] If the compiler succeeds to generate *.o file, but fixdep fails
to write necessary dependencies to .*.cmd file, Make will miss
to rebuild the object when headers or CONFIG options are changed.
In this case, fixdep should not generate .*.cmd file at all so
that 'arg-check' will surely trigger the rebuild of the object.
[2] A partially constructed .*.cmd file may not be a syntactically
correct makefile. The next time Make runs, it would include it,
then fail to parse it. Once this happens, 'make clean' is be the
only way to fix it.
In fact, [1] is no longer a problem since commit 9c2af1c737 ("kbuild:
add .DELETE_ON_ERROR special target"). Make deletes a target file on
any failure in its recipe. Because fixdep is a part of the recipe of
*.o target, if it fails, the *.o is deleted anyway. However, I am a
bit worried about the slight possibility of [2].
So, here is a solution. Let fixdep directly write to a .*.cmd file,
but allow makefiles to include it only when its corresponding target
exists.
This effectively reverts commit 2982c95357 ("kbuild: remove redundant
$(wildcard ...) for cmd_files calculation"), and commit 00d78ab2ba
("kbuild: remove dead code in cmd_files calculation in top Makefile")
because now we must check the presence of targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
