Do a final check for firmware assert before powering off device
in calibration mode. Collect RAM dump if firmware has asserted
for debug purpose. Also skip dump collection if device is already
powered off.
Change-Id: I99a438d6b7d7048b300244511c72d6fbfc610094
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Introduce state machine for various checkpoints in trusted touch usecase.
In error scenarios, this state machine helps driver to rollback to
previous state.
Change-Id: I8c8a0d23c0c44ed5e4be5e623680a250636b78f4
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Structure pointer added in list was not deleted properly.
Delete list in proper sequence and free pointer.
Change-Id: I9a5deb0801ec7366d0be7049e8771016a3bbdf44
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Remove voltage vote for vdd-cx-mx after probe. So that RPMh
should not condider APPS voltage vote.
Change-Id: I7a2bfff1298721f2736467b1b1bd694a578cd91f
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Send MSA segment of DDR to FW with IOVA range as part of
Host Capability. So that FW detect invalid host DDR access
before SMMU fault happens.
Change-Id: I21c011b50c54f37dd7b5a942e1914c1afdf6d766
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Avoid sending EXIT_POWER_SAVE QMI message to FW from
kernel pm_resume callback. Send EXIT_POWER_SAVE QMI
from new exported API which will be called from Host
driver at the time of HOST_WAKEUP_FROM_SLEEP.
When FW receive EXIT_POWER_SAVE QMI, it will implicitly
consider that it also received HOST_WAKEUP_FROM_SLEEP
and send ACK for it through CE2.
Change-Id: Iba6e0d026749bbe5fb4fca5547cad4540932142f
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Enables ufs debug feature for general/debug builds.
Disables this feature for perf builds.
Change-Id: I2b30c8081d24db7871c277c67631d92fc7d9ea60
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
This sysfs entry provides the state of the driver.
If it's in debug/perf state.
This can be used by user-space scripts to toggle various tracing.
Change-Id: If0e3d8e032f60c9134bdd5ce27fe37687e67770a
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Make changes to increase the max num hw pdns to 15 to cater
to requirement. Also increase the SRAM memory for PDN table
to store the additional PDN entries.
Change-Id: I6a0ff4659d4c577635b89e7d8d2a0de108b39269
Signed-off-by: Armaan Siddiqui <asiddiqu@codeaurora.org>
Don't allow IOCTL_KGSL_MAP_USER_MEM to import user memory that was
already allocated and mapped by KGSL in the first place. Remapping
memory never makes sense and it messes up reference counting in the
pools.
Change-Id: Ic0dedbade96ac6b30dcbbb794bf57a597f1bb351
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Move devfreq_icc to late init call to defer the probing.
Change-Id: I5eecb8f4c3e177696f8c4ebd04b84daef6fc65c2
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Empty the RSP fifo before executing any command in case
there is some stale data from previous commands.
Change-Id: I6f15e8f5a8e901da224e89b741c503d408b9449f
Signed-off-by: Gaurav Kashyap <gaurkash@codeaurora.org>
Make interface changes to get PDN configuration. The ioctl
can be used to notify whether a PDN is in IP collision
mode or in IP passthrough mode and provide the required configuration
information.
Change-Id: I36c596aa449669e5d5b389a1fbdafb6f92a81744
Signed-off-by: Armaan Siddiqui <asiddiqu@codeaurora.org>
Check if the get_cpu_device is NULL before using it for the OPP usage.
Change-Id: I312da0199eac7a78a84f0584e505ab800904f77f
Signed-off-by: Taniya Das <tdas@codeaurora.org>
There is mutex deadlock where the adapter_type is read in the
context of a call-back from the main-charger driver. Fix it by
moving it to the status_change work and using a local variable
to hold the type.
Change-Id: Id112097f70fbfb13acc368e9787cf6a0c3a1acff
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Update the prepare and set rate sequence for snoc_a and
cnoc_a clk for rate to get updated. The sequence will be
first clk_prepare_enable and the clk_set_rate for rate to
update.
Change-Id: Ibc2081e742a3b760c2440aa1987a915001f21b74
Signed-off-by: Saurabh Sahu <sausah@codeaurora.org>
This change enables EXT4 and FAT FS support for sdxlemur.
Change-Id: I273bcb4d4c78b79ab3bbaa790165f04bcb5595e1
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Avoid a deleted session being used for power update.
Change-Id: I44a6ea0a4c0dda499bc6adac94b2edafdeeab82c
Signed-off-by: George Shen <sqiao@codeaurora.org>
Enable IPC logging for functionalities like diag, adb
and mtp that uses the f_fs driver on Holi.
Change-Id: I9f627f74d3b34b69da6da8d3390dc5f3eee95f14
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
The clock for cphy_rx LOWSVS fmax is updated from 320 to 266.67MHZ, thus
update the frequency table and also the corner values.
Change-Id: Ibe53a495347a28c15cdbc2049cca0ccdde4b3fcf
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Some additional drivers are now needed for cpufreq to work, so
add them to the db845c_gki.fragment
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: Ie126f4613b9e5e31c9862d3d4b9c2afb4a5562e6
Bug: 146449535
Currently GSI endpoint usb_request pointer is allocated only once
during boot time and it used by dwc3 driver for mapping doorbell register
address with USB endpoint request only once. During composition switch
or connect/disconnect scenarios same USB endpoint is being re-enabled and
does not create mapping again.
On some platforms multiple UDC cores can work in device mode. In case
of binding the UDC with primary controller first and then disconnect the
primary and bind UDC to secondary controller. Driver does not re-mapping
the doorbell address with current UDC core and USB GSI wrapper is trying
to access previously mapped GSI DBL address with previous core
resulting into smmu fault.
Fix this issue by adding re-mapping of doorbell using dwc->sysdev node
to map the doorbell register with correct UDC.
Change-Id: I327126148c2311884aee2aa99bb59b7add06e302
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
With commit 'e83321764 ANDROID: KMI symbol lists: migrate section name'
section name is updated for allowed list. Update the usage to
symbol_list in script as well.
Change-Id: Ie6aa6706405a8b0a79359d4314679c48e42160db
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
This module is used to tunnel multicast
packets received on an interface to WLAN
clients which have registered for these
packet streams. Mainly used to tunnel
EMBMS packets received on TMGI streams.
Change-Id: I996077342261ec2cb688e98319c6881d2dd7cce2
Acked-by: Raju Velpula <rvelpula@qti.qualcomm.com>
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
"mapping->clean_bitmap" holds the iovas which are currently available.
"mapping->bitmap" holds the iovas which will be available after a tlb
invalidate operation.
For an iova to be reserved properly, it needs to be set in both of the
above bitmaps.
Fixes: 07972090b8 ("dma-mapping-fast: reduce TLBI during map")
Change-Id: I163e63fd1dfc8161733f56d796a9f0a781fd79b1
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
