commit 94cff94634e506a4a44684bee1875d2dbf782722 upstream.
On x86 during boot, clockevent_i8253_disable() can be invoked via
x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens
with enabled interrupts.
If some of the old i8253 hardware is actually used then lockdep will notice
that i8253_lock is used in hard interrupt context. This causes lockdep to
complain because it observed the lock being acquired with interrupts
enabled and in hard interrupt context.
Make clockevent_i8253_disable() acquire the lock with
raw_spinlock_irqsave() to cure this.
[ tglx: Massage change log and use guard() ]
Fixes: c8c4076723 ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream.
phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common
to all PHYs. There is no need to set them every time a PHY is initialized.
Set timing register only when the 1st PHY is initialized.
Fixes: f3b5a8d9b5 ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: [email protected]
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Tested-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream.
If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: [email protected]
Fixes: 53d2a715c2 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9e000f1b7f31684cc5927e034360b87ac7919593 upstream.
The function snd_es1968_capture_open() calls the function
snd_pcm_hw_constraint_pow2(), but does not check its return
value. A proper implementation can be found in snd_cx25821_pcm_open().
Add error handling for snd_pcm_hw_constraint_pow2() and propagate its
error code.
Fixes: b942cf815b ("[ALSA] es1968 - Fix stuttering capture")
Cc: [email protected] # v2.6.22
Signed-off-by: Wentao Liang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit adfab6b39202481bb43286fff94def4953793fdb upstream.
The original PPTT code had a bug where the processor subtable length
was not correctly validated when encountering a truncated
acpi_pptt_processor node.
Commit 7ab4f0e37a0f4 ("ACPI PPTT: Fix coding mistakes in a couple of
sizeof() calls") attempted to fix this by validating the size is as
large as the acpi_pptt_processor node structure. This introduced a
regression where the last processor node in the PPTT table is ignored
if it doesn't contain any private resources. That results errors like:
ACPI PPTT: PPTT table found, but unable to locate core XX (XX)
ACPI: SPE must be homogeneous
Furthermore, it fails in a common case where the node length isn't
equal to the acpi_pptt_processor structure size, leaving the original
bug in a modified form.
Correct the regression by adjusting the loop termination conditions as
suggested by the bug reporters. An additional check performed after
the subtable node type is detected, validates the acpi_pptt_processor
node is fully contained in the PPTT table. Repeating the check in
acpi_pptt_leaf_node() is largely redundant as the node is already
known to be fully contained in the table.
The case where a final truncated node's parent property is accepted,
but the node itself is rejected should not be considered a bug.
Fixes: 7ab4f0e37a0f4 ("ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls")
Reported-by: Maximilian Heyne <[email protected]>
Closes: https://lore.kernel.org/linux-acpi/20250506-draco-taped-15f475cd@mheyne-amazon/
Reported-by: Yicong Yang <[email protected]>
Closes: https://lore.kernel.org/linux-acpi/[email protected]/
Signed-off-by: Jeremy Linton <[email protected]>
Tested-by: Yicong Yang <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Tested-by: Maximilian Heyne <[email protected]>
Cc: All applicable <[email protected]> # 7ab4f0e37a0f4: ACPI PPTT: Fix coding mistakes ...
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit df180e65305f8c1e020d54bfc2132349fd693de1 upstream.
Several issues with this change:
* The analysis is flawed and it's unclear what problem is being
fixed. There is no difference between wait_event_freezable_timeout()
and wait_event_timeout() with respect to device interrupts. And of
course "the interrupt notifying the finish of an operation happens
during wait_event_freezable_timeout()" -- that's how it's supposed
to work.
* The link at the "Closes:" tag appears to be an unrelated
use-after-free in idxd.
* It introduces a regression: dmatest threads are meant to be
freezable and this change breaks that.
See discussion here:
https://lore.kernel.org/dmaengine/[email protected]/
Fixes: e87ca16e9911 ("dmaengine: dmatest: Fix dmatest waiting less when interrupted")
Signed-off-by: Nathan Lynch <[email protected]>
Link: https://lore.kernel.org/r/20250403-dmaengine-dmatest-revert-waiting-less-v1-1-8227c5a3d7c8@amd.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 6d6d7f91cc8c111d40416ac9240a3bb9396c5235 ]
If there are still layout segments in the layout plh_return_lsegs list
after a layout return, we should be resetting the state to ensure they
eventually get returned as well.
Fixes: 68f744797e ("pNFS: Do not free layout segments that are marked for return")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 59b5639490f51aa604d18064dcf0c2d72eb1decf ]
If the cred assigned to the layout that we're updating differs from
the one used to retrieve the new layout segment, then we need to
update the layout plh_lc_cred field.
Signed-off-by: Trond Myklebust <[email protected]>
Stable-dep-of: 6d6d7f91cc8c ("NFSv4/pnfs: Reset the layout state after a layoutreturn")
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9d8a99c5a7c7f4f7eca2c168a4ec254409670035 ]
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa62 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Abdun Nihaal <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 498625a8ab2c8e1c9ab5105744310e8d6952cc01 ]
It has been reported that when under a bridge with stp_state=1, the logs
get spammed with this message:
[ 251.734607] fsl_dpaa2_eth dpni.5 eth0: Couldn't decode source port
Further debugging shows the following info associated with packets:
source_port=-1, switch_id=-1, vid=-1, vbid=1
In other words, they are data plane packets which are supposed to be
decoded by dsa_tag_8021q_find_port_by_vbid(), but the latter (correctly)
refuses to do so, because no switch port is currently in
BR_STATE_LEARNING or BR_STATE_FORWARDING - so the packet is effectively
unexpected.
The error goes away after the port progresses to BR_STATE_LEARNING in 15
seconds (the default forward_time of the bridge), because then,
dsa_tag_8021q_find_port_by_vbid() can correctly associate the data plane
packets with a plausible bridge port in a plausible STP state.
Re-reading IEEE 802.1D-1990, I see the following:
"4.4.2 Learning: (...) The Forwarding Process shall discard received
frames."
IEEE 802.1D-2004 further clarifies:
"DISABLED, BLOCKING, LISTENING, and BROKEN all correspond to the
DISCARDING port state. While those dot1dStpPortStates serve to
distinguish reasons for discarding frames, the operation of the
Forwarding and Learning processes is the same for all of them. (...)
LISTENING represents a port that the spanning tree algorithm has
selected to be part of the active topology (computing a Root Port or
Designated Port role) but is temporarily discarding frames to guard
against loops or incorrect learning."
Well, this is not what the driver does - instead it sets
mac[port].ingress = true.
To get rid of the log spam, prevent unexpected data plane packets to
be received by software by discarding them on ingress in the LISTENING
state.
In terms of blame attribution: the prints only date back to commit
d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based
on the VBID"). However, the settings would permit a LISTENING port to
forward to a FORWARDING port, and the standard suggests that's not OK.
Fixes: 640f763f98 ("net: dsa: sja1105: Add support for Spanning Tree Protocol")
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a73fa3690a1f3014d6677e368dce4e70767a6ba2 ]
spi_test_print_hex_dump() prints buffers holding less than 1024 bytes in
full. Larger buffers are truncated: only the first 512 and the last 512
bytes are printed, separated by a truncation message. The latter is
confusing in case the buffer holds exactly 1024 bytes, as all data is
printed anyway.
Fix this by printing buffers holding up to and including 1024 bytes in
full.
Fixes: 84e0c4e5e2 ("spi: add loopback test driver to allow for spi_master regression tests")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://patch.msgid.link/37ee1bc90c6554c9347040adabf04188c8f704aa.1746184171.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f81b33582f9339d2dc17c69b92040d3650bb4bae ]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcf/0x610 mm/kasan/report.c:489
kasan_report+0xb5/0xe0 mm/kasan/report.c:602
rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195
rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132
__rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232
rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109
create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052
ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095
ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679
vfs_write fs/read_write.c:677 [inline]
vfs_write+0x26a/0xcc0 fs/read_write.c:659
ksys_write+0x1b8/0x200 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the function rxe_create_cq, when rxe_cq_from_init fails, the function
rxe_cleanup will be called to handle the allocated resources. In fact,
some memory resources have already been freed in the function
rxe_cq_from_init. Thus, this problem will occur.
The solution is to let rxe_cleanup do all the work.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://paste.ubuntu.com/p/tJgC42wDf6/
Tested-by: liuyi <[email protected]>
Signed-off-by: Zhu Yanjun <[email protected]>
Link: https://patch.msgid.link/[email protected]
Reviewed-by: Daisuke Matsuda <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ffbc26bc91c1f1eb3dcf5d8776e74cbae21ee13a ]
On architectures where an s64 is not 64-bit aligned, this may result
insufficient alignment of the timestamp and the structure being too small.
Use aligned_s64 to force the alignment.
Fixes: a1caeebab07e ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer
Reported-by: David Lechner <[email protected]>
Reviewed-by: Nuno Sá <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2ca34b508774aaa590fc3698a54204706ecca4ba ]
Remove erroneous subtraction of 4 from the total FIFO depth read from
device tree. The stored depth is for checking against total capacity,
not initial vacancy. This prevented writes near the FIFO's full size.
The check performed just before data transfer, which uses live reads of
the TDFV register to determine current vacancy, correctly handles the
initial Depth - 4 hardware state and subsequent FIFO fullness.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: [email protected]
Signed-off-by: Gabriel Shahrouzi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ed6daf2b2832d9b07582a6ff884039afa9063206 ]
Some properties were parsed from the device tree and then ignored by the
driver. Some would return an error if absent from the device tree, then
return an error if they were found because they are unsupported by the
driver.
Avoid parsing unused properties and clearly explain in the documentation
the ignored / unsupported properties.
Signed-off-by: Quentin Deslandes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Stable-dep-of: 2ca34b508774 ("staging: axis-fifo: Correct handling of tx_fifo_depth for size validation")
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c6e8d85fafa7193613db37da29c0e8d6e2515b13 ]
The axis-fifo driver performs a full hardware reset (via
reset_ip_core()) in several error paths within the read and write
functions. This reset flushes both TX and RX FIFOs and resets the
AXI-Stream links.
Allow the user to handle the error without causing hardware disruption
or data loss in other FIFO paths.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: [email protected]
Signed-off-by: Gabriel Shahrouzi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0443b3f4436321e1098fdf74432c8867016339da ]
Following the device's documentation guidance, reading a packet from the
device or writing a packet to it must be atomic. Previously, only
reading device's vacancy (before writing on it) or occupancy (before
reading from it) was locked. Hence, effectively reading the packet or
writing the packet wasn't locked at all. However, reading a packet (and
writing one, to a lesser extent) requires to read 3 different registers
in a specific order, without missing one or else we should reset the
device.
This patch fixes the device's locking mechanism on the FIFO character
device. As the device was using copy_from_user() and copy_to_user(), we
need to replace spinlocks with mutexes.
Signed-off-by: Quentin Deslandes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Stable-dep-of: c6e8d85fafa7 ("staging: axis-fifo: Remove hardware resets for user errors")
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit bfcfe6d335a967f8ea0c1980960e6f0205b5de6e ]
The wlan_ctrl_by_user detection was introduced by commit a50bd128f2
("asus-wmi: record wlan status while controlled by userapp").
Quoting from that commit's commit message:
"""
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
"""
The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above)
return values, but the flag mistakenly also gets set on laptops with
0x0005000? ((1), (2)) return values. This is causing rfkill problems on
laptops where 0x0005000? is returned.
Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000?
return values.
Fixes: a50bd128f2 ("asus-wmi: record wlan status while controlled by userapp")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 65781e19dcfcb4aed1167d87a3ffcc2a0c071d47 ]
do_umount() analogue of the race fixed in 119e1ef80e "fix
__legitimize_mnt()/mntput() race". Here we want to make sure that
if __legitimize_mnt() doesn't notice our lock_mount_hash(), we will
notice their refcount increment. Harder to hit than mntput_no_expire()
one, fortunately, and consequences are milder (sync umount acting
like umount -l on a rare race with RCU pathwalk hitting at just the
wrong time instead of use-after-free galore mntput_no_expire()
counterpart used to be hit). Still a bug...
Fixes: 48a066e72d ("RCU'd vfsmounts")
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 650415fca0a97472fdd79725e35152614d1aad76 ]
The original nvme subsystem design didn't have a CONNECTING state; the
state machine allowed transitions from RESETTING to LIVE directly.
With the introduction of nvme fabrics the CONNECTING state was
introduce. Over time the nvme-pci started to use the CONNECTING state as
well.
Eventually, a bug fix for the nvme-fc started to depend that the only
valid transition to LIVE was from CONNECTING. Though this change didn't
update the firmware update handler which was still depending on
RESETTING to LIVE transition.
The simplest way to address it for the time being is to switch into
CONNECTING state before going to LIVE state.
Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state")
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c44572e0cc13c9afff83fd333135a0aa9b27ba26 ]
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506 ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thorsten Blum <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5097eaae98e53f9ab9d35801c70da819b92ca907 ]
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Nuno Sá <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e4ca0e59c39442546866f3dd514a3a5956577daf ]
Some user may want to use aligned signed 64-bit type.
Provide it for them.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Stable-dep-of: 5097eaae98e5 ("iio: adc: dln2: Use aligned_s64 for timestamp")
Signed-off-by: Sasha Levin <[email protected]>
commit 4e77d3ec7c7c0d9535ccf1138827cb9bb5480b9b upstream.
wait_event_interruptible_timeout returns a long
The return value was being assigned to an int causing an integer overflow
when the remaining jiffies > INT_MAX which resulted in random error
returns.
Use a long return value, converting to the int ioctl return only on error.
Fixes: bb99794a47 ("usb: usbtmc: Add ioctl for vendor specific read")
Cc: [email protected]
Signed-off-by: Dave Penkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a9747c9b8b59ab4207effd20eb91a890acb44e16 upstream.
wait_event_interruptible_timeout returns a long
The return was being assigned to an int causing an integer overflow when
the remaining jiffies > INT_MAX resulting in random error returns.
Use a long return value, converting to the int ioctl return only on
error.
Fixes: 739240a9f6 ("usb: usbtmc: Add ioctl USBTMC488_IOCTL_WAIT_SRQ")
Cc: [email protected]
Signed-off-by: Dave Penkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cac01bd178d6a2a23727f138d647ce1a0e8a73a1 upstream.
wait_event_interruptible_timeout returns a long
The return was being assigned to an int causing an integer overflow when
the remaining jiffies > INT_MAX resulting in random error returns.
Use a long return value and convert to int ioctl return only on error.
When the return value of wait_event_interruptible_timeout was <= INT_MAX
the number of remaining jiffies was returned which has no meaning for the
user. Return 0 on success.
Reported-by: Michael Katzmann <[email protected]>
Fixes: dbf3e7f654 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Cc: [email protected]
Signed-off-by: Dave Penkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 054c5145540e5ad5b80adf23a5e3e2fc281fb8aa upstream.
usbtmc_read() calls usbtmc_generic_read()
which uses interruptible sleep, but usbtmc_read()
itself uses uninterruptble sleep for mutual exclusion
between threads. That makes no sense.
Both should use interruptible sleep.
Fixes: 5b775f672c ("USB: add USB test and measurement class driver")
Cc: stable <[email protected]>
Signed-off-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 312d79669e71283d05c05cc49a1a31e59e3d9e0e upstream.
This patch ensures that the UCSI driver waits for all pending tasks in the
ucsi_displayport_work workqueue to finish executing before proceeding with
the partner removal.
Cc: stable <[email protected]>
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Benson Leung <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e918d3959b5ae0e793b8f815ce62240e10ba03a4 upstream.
This patch fixes Type-C Compliance Test TD 4.7.6 - Try.SNK DRP Connect
SNKAS.
The compliance tester moves into SNK_UNATTACHED during toggling and
expects the PUT to apply Rp after tPDDebounce of detection. If the port
is in SNK_TRY_WAIT_DEBOUNCE, it will move into SRC_TRYWAIT immediately
and apply Rp. This violates TD 4.7.5.V.3, where the tester confirms that
the PUT attaches Rp after the transitions to Unattached.SNK for
tPDDebounce.
Change the tcpm_set_state delay between SNK_TRY_WAIT_DEBOUNCE and
SRC_TRYWAIT to tPDDebounce.
Fixes: a0a3e04e6b ("staging: typec: tcpm: Check for Rp for tPDDebounce")
Cc: stable <[email protected]>
Signed-off-by: RD Babiera <[email protected]>
Reviewed-by: Badhri Jagan Sridharan <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit fcaf3b2683b05a9684acdebda706a12025a6927a upstream.
Currently quota recovery is synchronized with unmount using sb->s_umount
semaphore. That is however prone to deadlocks because
flush_workqueue(osb->ocfs2_wq) called from umount code can wait for quota
recovery to complete while ocfs2_finish_quota_recovery() waits for
sb->s_umount semaphore.
Grabbing of sb->s_umount semaphore in ocfs2_finish_quota_recovery() is
only needed to protect that function from disabling of quotas from
ocfs2_dismount_volume(). Handle this problem by disabling quota recovery
early during unmount in ocfs2_dismount_volume() instead so that we can
drop acquisition of sb->s_umount from ocfs2_finish_quota_recovery().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <[email protected]>
Reported-by: Shichangkuo <[email protected]>
Reported-by: Murad Masimov <[email protected]>
Reviewed-by: Heming Zhao <[email protected]>
Tested-by: Heming Zhao <[email protected]>
Acked-by: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a6aeb739974ec73e5217c75a7c008a688d3d5cf1 upstream.
In 'lookup_or_create_module_kobject()', an internal kobject is created
using 'module_ktype'. So call to 'kobject_put()' on error handling
path causes an attempt to use an uninitialized completion pointer in
'module_kobject_release()'. In this scenario, we just want to release
kobject without an extra synchronization required for a regular module
unloading process, so adding an extra check whether 'complete()' is
actually required makes 'kobject_put()' safe.
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=7fb8a372e1f6add936dd
Fixes: 942e443127 ("module: Fix mod->mkobj.kobj potentially freed too early")
Cc: [email protected]
Suggested-by: Petr Pavlu <[email protected]>
Signed-off-by: Dmitry Antipov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Petr Pavlu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1f0304dfd9d217c2f8b04a9ef4b3258a66eedd27 upstream.
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst
Link: https://lore.kernel.org/xen-devel/ZO0WrR5J0xuwDIxW@mail-itl/
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: [email protected]
Signed-off-by: Jason Andryuk <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a5c7973539b010874a37a0e846e62ac6f00553ba upstream.
Device tree bindings state that the clock is optional for UHCI platform
controllers, and some existing device trees don't provide those - such
as those for VIA/WonderMedia devices.
The driver however fails to probe now if no clock is provided, because
devm_clk_get returns an error pointer in such case.
Switch to devm_clk_get_optional instead, so that it could probe again
on those platforms where no clocks are given.
Cc: stable <[email protected]>
Fixes: 26c502701c ("usb: uhci: Add clk support to uhci-platform")
Signed-off-by: Alexey Charkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 609bc31eca06c7408e6860d8b46311ebe45c1fef upstream.
The inclinometer channels were previously defined with 14 realbits.
However, the ADIS16201 datasheet states the resolution for these output
channels is 12 bits (Page 14, text description; Page 15, table 7).
Correct the realbits value to 12 to accurately reflect the hardware.
Fixes: f7fe1d1dd5 ("staging: iio: new adis16201 driver")
Cc: [email protected]
Signed-off-by: Gabriel Shahrouzi <[email protected]>
Reviewed-by: Marcelo Schmitt <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f083f8a21cc785ebe3a33f756a3fa3660611f8db upstream.
Fix register read/write routine as per datasheet.
When reading multiple consecutive registers, only the first one is read
properly. This is due to missing chip select deassert and assert again
between first and second 16bit transfer, as shown in the datasheet
AD7606C-16, rev 0, figure 110.
Fixes: f2a22e1e17 ("iio: adc: ad7606: Add support for software mode for ad7616")
Reviewed-by: David Lechner <[email protected]>
Signed-off-by: Angelo Dureghello <[email protected]>
Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2e922956277187655ed9bedf7b5c28906e51708f upstream.
The mode setting logic in ad7816_store_mode was reversed due to
incorrect handling of the strcmp return value. strcmp returns 0 on
match, so the `if (strcmp(buf, "full"))` block executed when the
input was not "full".
This resulted in "full" setting the mode to AD7816_PD (power-down) and
other inputs setting it to AD7816_FULL.
Fix this by checking it against 0 to correctly check for "full" and
"power-down", mapping them to AD7816_FULL and AD7816_PD respectively.
Fixes: 7924425db0 ("staging: iio: adc: new driver for AD7816 devices")
Cc: [email protected]
Signed-off-by: Gabriel Shahrouzi <[email protected]>
Acked-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/stable/20250414152920.467505-1-gshahrouzi%40gmail.com
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6d7ea0881000966607772451b789b5fb5766f11d upstream.
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to [email protected].
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <[email protected]>
Signed-off-by: Aditya Garg <[email protected]>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 9f34ad89bcf0e6df6f8b01f1bdab211493fc66d1 ]
When VLAN filtering is off, we configure the switch to forward, but not
learn on VLAN table misses. This effectively disables learning while not
filtering.
Fix this by switching to forward and learn. Setting the learning disable
register will still control whether learning actually happens.
Fixes: dad8d7c645 ("net: dsa: b53: Properly account for VLAN filtering")
Signed-off-by: Jonas Gorski <[email protected]>
Tested-by: Florian Fainelli <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8478a729c0462273188263136880480729e9efca ]
Region locking introduced in v5.6-rc4 contained three macros to handle
the region locks: ahash_bucket_start(), ahash_bucket_end() which gave
back the start and end hash bucket values belonging to a given region
lock and ahash_region() which should give back the region lock belonging
to a given hash bucket. The latter was incorrect which can lead to a
race condition between the garbage collector and adding new elements
when a hash type of set is defined with timeouts.
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Reported-by: Kota Toda <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
