Add the PMIC clocks required to be requested from clients via RPMH clock
driver.
Change-Id: I75b02fd3283ea0c459c6e28f06cfb45f04ece214
Signed-off-by: Taniya Das <[email protected]>
Currently driver is giving back requests to gadget even if
the active transfers are not stopped. This might lead the
controller to access the requests which are already unmapped.
This change adds a judgement for giving back the requests to
gadget based on ep command status. Also if ep command times out
and the controller doesn't stop correctly then mark it as an
error event and restart the USB session.
Change-Id: If32cddddf0544140d5bdf68df9144702e00dc758
Signed-off-by: Udipto Goswami <[email protected]>
With GPIO, UART and others, allow specifying the device index via the
aliases node in the device tree.
On embedded devices, there is often a combination of removable (e.g.
SD card) and non-removable MMC devices (e.g. eMMC).
Therefore the index might change depending on
* host of removable device
* removable card present or not
This makes it difficult to hardcode the root device, if it is on the
non-removable device. E.g. if SD card is present eMMC will be mmcblk1,
if SD card is not present at boot, eMMC will be mmcblk0.
Alternative solutions like PARTUUIDs do not cover the case where multiple
mmcblk devices contain the same image. This is a common issue on devices
that can boot both from eMMC (for regular boot) and SD cards (as a
temporary boot medium for development). When a firmware image is
installed to eMMC after a test boot via SD card, there will be no
reliable way to refer to a specific device using (PART)UUIDs oder
LABELs.
The demand for this feature has led to multiple attempts to implement
it, dating back at least to 2012 (see
https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous
discussion from 2014).
All indices defined in the aliases node will be reserved for use by the
respective MMC device, moving the indices of devices that don't have an
alias up into the non-reserved range. If the aliases node is not found,
the driver will act as before.
This is a rebased and cleaned up version of
https://www.spinics.net/lists/linux-mmc/msg26588.html .
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
Git-commit: fa2d0aa96941e8dc347e49a04c75468e3002ee20_
Change-Id: I88c11705c8b66022e67b38a64bbc91625357a4bc
Based-on-patch-by: Sascha Hauer <[email protected]>
Link: https://lkml.org/lkml/2020/8/5/194
Signed-off-by: Matthias Schiffer <[email protected]>
Signed-off-by: Ram Prakash Gupta <[email protected]>
The PON_HLOS module does not have the PON_DEBOUNCE_CTL register
to read the debounce delay configured for KPDPWR debounce.
This register is present in PON_PBS peripheral. Due to this the
software debounce control logic does not work as expected. To fix
this add support to read the PON_PBS peripheral from PON_HLOS
module by adding PON_PBS register as a second SPMI register base
in device tree node.
Change-Id: I15737a3dc6e8c99cd21531685c41ec1b2752b2ef
Signed-off-by: Kiran Gunda <[email protected]>
QDSS components depend on "CONFIG_CORESIGHT", so enable it.
Enable "STM_PROTO_BASIC“ to support to write log to /dev/coresight-stm.
Change-Id: Ib8770c9a5c72abe718c814766a0e2d9f4e091524
Signed-off-by: Yuanfang Zhang <[email protected]>
The multi-page bvec is resulting in the performance regression on
UFS devices in sequential read test for upto ~9%. Hence, disable
it as a workaround.
Change-Id: I1dc3f5e710fd1c9a76f32e3144a0081df755ea26
Signed-off-by: Sahitya Tummala <[email protected]>
Some remote edge initial rx channel state is set to CLOSING, in this
scenario, allow creation of smd device for this edge.
Change-Id: I5937b8f2451630c9ecbe8627ab8817a4ce00e673
Signed-off-by: Suresh Kumar Allam <[email protected]>
Signed-off-by: Deepak Kumar Singh <[email protected]>
Update the android/abi_gki_aarch64_qcom with recent symbol additions.
Simple change and no need to update the .xml file, as no new symbol
addition.
Bug: 174275677
Signed-off-by: Archana Sriram <[email protected]>
Signed-off-by: Kamal Agrawal <[email protected]>
Change-Id: Ic96fc5d11ab8d21fadbf85658e374e06dde14d0f
Increment NR_ISOLATED_ANON when isolate a page so that the same is
decremented when the page migration is successful or when adding pages
back to the lru.
Change-Id: I6879c0029342560496b79d649a77283c767ab08e
Fixes: aa3fa08df4 ("mem-offline: improve the effective utilization of movable zone")
Signed-off-by: Charan Teja Reddy <[email protected]>
On some customer display panels, touch ghosting can happen due to
a voltage ripple from amoled. Add support to fix this issue, following
HW recommendation, by disabling smart pulse skipping in module
probe and disabling forced PSM when AMOLED is enabled.
Change-Id: Id5886d4cdaf2aa58bc53a874041bfae90374fafb
Signed-off-by: Jishnu Prakash <[email protected]>
Initialize the irq count work and also using irqf
no suspend flag during bark irq registration.
Change-Id: Ice72c4e5aff2bcdbba5d53eb1c839a2f86a2fd02
Signed-off-by: Gaurav Kohli <[email protected]>
This patch adds to update GKI symbol list for Exynosauto SoC since
adding some drivers as GKI vendor modules.. To review the allowed list
easily, this patch does not include any newly additions of GKI symbols.
Bug: 174288561
Signed-off-by: Chanho Park <[email protected]>
Change-Id: Iac4910d0c43a07e24e5e4069e3d2f1b3378fce2b
This change is for general scheduler improvement.
Change-Id: I8f521dfd31ff1c8cc1f16805e4e0ac78228d9383
Signed-off-by: Pavankumar Kondeti <[email protected]>
Value of sensor->calib_data_len could be changed between
the reads causing potential heap buffer overflow.
When a 0 length is passed to kzalloc, non-NULL pointer
is returned, but this pointer is invalid.
Change-Id: Ie6ed76f63f7a433728e2292222ba9716c3a02635
Signed-off-by: rbandi <[email protected]>
Return the captured value during TX and RX config from API
dmaengine_slave_config().
Also For LE VM case, do not touch resources like clocks, ICB vote,
GPIO etc. LE VM doesn't need resources to be controlled in TVM for
now till we have SOC infra support.
Change-Id: Iaa74b1b12a53da5764b1766188075349f3c42db8
Signed-off-by: Mukesh Kumar Savaliya <[email protected]>
In case of DP interface as primary, if device boots up with
DP connected, external interface driver is unable to notify
audio events as audio codec is getting registered later.
Add change to send audio event once audio codec gets registered.
Change-Id: I8d630adf892714ff2eb4d6039dc058b54c425b83
Signed-off-by: Narender Ankem <[email protected]>
Signed-off-by: Sudarsan Ramesh <[email protected]>
Move cache based pkey sid retrieval code which was added
with Commit "409dcf31" under CONFIG_SECURITY_INFINIBAND.
As its going to alloc a new cache which impacts
low ram devices which was enabled by default.
Change-Id: I179a461386a09ebd58591fe835e3e0e0002db392
Suggested-by: Paul Moore <[email protected]>
Signed-off-by: Ravi Kumar Siddojigari <[email protected]>
Memlat and compute governors are made immutable to avoid governor
switch at run time as the devices using these governors are tightly
coupled with hardware features. These governors allocate pmu counters
to count various events used in the algorithm. These counters are
allocated exclusively for algorithm's use.
This leaves limited counters available for other uses in the system
such as profiling in user space using perf tool. Add and export a
function in devfreq memlat governor to remove immutable flag to allow
governor switch, which in turn can free pmu counters.
Similarly add and export a function in rimps_memlat driver to
free pmu counters.
The intended use of these functions is to be called by test modules
to allow freeing of pmu counters at runtime.
Change-Id: I243a3201368d5a82aeaf820e775cdc1aecdfea07
Signed-off-by: Santosh Mardi <[email protected]>
Discard character printing in ipc log buf when get_next_logbuf()
returns count value less than the size argument.
Change-Id: I0ba388400c76c16da423a2ccb67d961ed31e87b4
Signed-off-by: Santosh Mardi <[email protected]>
